图像处理之水波纹扩散效果(water ripple effect)

简介: Water Ripple Effect - 水波纹效果 一:原理 模拟水波纹效果,最常见的是sine或者cosn的函数,周期性变化,贴近自然 当水波纹中中间开始向四周扩散的时候,一般都是慢慢的失去能量,振幅也是 越来越小,所以程序要模拟这个过程时候,要加上一个能量递减因子。

Water Ripple Effect - 水波纹效果

一:原理

模拟水波纹效果,最常见的是sine或者cosn的函数,周期性变化,贴近自然

当水波纹中中间开始向四周扩散的时候,一般都是慢慢的失去能量,振幅也是

越来越小,所以程序要模拟这个过程时候,要加上一个能量递减因子。然后用

公式 y = a*sine(bx + c)来表示波纹公式。

二:程序实现

最重要的一步是计算水波纹的振幅。在任意一点确定水波的中心位置,可以是

鼠标随机选取,对半径范围内的像素位置实现水波生成,然后转换为位置,对

位置实现浮点数取整,然后使用适当的插值算法,本例使用双线性插值。

三:程序效果


四:滤镜完全源代码,这次我写了些中文注解,不给源代码的博文不是好博文

package com.gloomyfish.filter.study;

import java.awt.image.BufferedImage;

public class WaterFilter extends AbstractBufferedImageOp {
	private float wavelength = 16;
	private float amplitude = 10;
	private float phase = 0;
	private float centreX = 0.5f;
	private float centreY = 0.5f;
	private float radius = 50;

	private float radius2 = 0;
	private float icentreX;
	private float icentreY;
	
	public WaterFilter() {

	}

	@Override
	public BufferedImage filter(BufferedImage src, BufferedImage dest) {
		int width = src.getWidth();
        int height = src.getHeight();

        if ( dest == null )
        	dest = createCompatibleDestImage( src, null );

        int[] inPixels = new int[width*height];
        int[] outPixels = new int[width*height];
        getRGB( src, 0, 0, width, height, inPixels );
		icentreX = width * centreX;
		icentreY = height * centreY;
		if ( radius == 0 )
			radius = Math.min(icentreX, icentreY);
		radius2 = radius*radius;
        int index = 0;
        float[] out = new float[2];
        for(int row=0; row<height; row++) {
        	for(int col=0; col<width; col++) {
        		index = row * width + col;
        		
        		// 获取水波的扩散位置,最重要的一步
        		generateWaterRipples(col, row, out);
				int srcX = (int)Math.floor( out[0] );
				int srcY = (int)Math.floor( out[1] );
				float xWeight = out[0]-srcX;
				float yWeight = out[1]-srcY;
				int nw, ne, sw, se;
				
				// 获取周围四个像素,插值用,
				if ( srcX >= 0 && srcX < width-1 && srcY >= 0 && srcY < height-1) {
					// Easy case, all corners are in the image
					int i = width*srcY + srcX;
					nw = inPixels[i];
					ne = inPixels[i+1];
					sw = inPixels[i+width];
					se = inPixels[i+width+1];
				} else {
					// Some of the corners are off the image
					nw = getPixel( inPixels, srcX, srcY, width, height );
					ne = getPixel( inPixels, srcX+1, srcY, width, height );
					sw = getPixel( inPixels, srcX, srcY+1, width, height );
					se = getPixel( inPixels, srcX+1, srcY+1, width, height );
				}
				
				// 取得对应的振幅位置P(x, y)的像素,使用双线性插值
				/*if(xWeight >=0 || yWeight >= 0)
				{
					outPixels[index] = ImageMath.bilinearInterpolate(xWeight, yWeight, nw, ne, sw, se);					
				}
				else 
				{
					outPixels[index] = inPixels[index];
				}*/
				outPixels[index] = ImageMath.bilinearInterpolate(xWeight, yWeight, nw, ne, sw, se);
        	}
        }

        setRGB( dest, 0, 0, width, height, outPixels );
        return dest;
	}

	private int getPixel(int[] pixels, int x, int y, int width, int height) {
		if (x < 0 || x >= width || y < 0 || y >= height) {
			return 0; // 有点暴力啦,懒得管啦
		}
		return pixels[ y*width+x ];
	}

	protected void generateWaterRipples(int x, int y, float[] out) {
		float dx = x-icentreX;
		float dy = y-icentreY;
		float distance2 = dx*dx + dy*dy;
		// 确定 water ripple的半径,如果在半径之外,就直接获取原来位置,不用计算迁移量
		if (distance2 > radius2) { 
			out[0] = x;
			out[1] = y;
		} else {
			// 如果在radius半径之内,计算出来
			float distance = (float)Math.sqrt(distance2);
			// 计算改点振幅
			float amount = amplitude * (float)Math.sin(distance / wavelength * ImageMath.TWO_PI - phase);
			// 计算能量损失, 
			amount *= (radius-distance)/radius; // 计算能量损失,
			if ( distance != 0 )
				amount *= wavelength/distance;
			// 得到water ripple 最终迁移位置
			out[0] = x + dx*amount;
			out[1] = y + dy*amount;
		}
	}
	
}

觉得不错请顶一下,谢谢!

转载请务必注明出处!谢谢!
目录
相关文章
|
SQL 关系型数据库 MySQL
MySQL - 一文解析 SQL 的执行顺序
MySQL - 一文解析 SQL 的执行顺序
563 0
|
算法 计算机视觉
图像处理之水波纹扩散效果(water ripple effect)
图像处理之水波纹扩散效果(water ripple effect)
349 5
|
7月前
|
人工智能 Java 测试技术
Blackbox.Ai体验:AI编程插件如何提升开发效率
Blackbox.ai 是一款广受好评的AI集成平台,汇聚了多个知名AI助手,如deepseek-R1、ChatGPT-4o等,并深度集成到VSCode中。用户无需频繁上传文件,直接在编辑器内与AI对话,极大提升了开发效率。其特色功能包括自动化网页生成、代码翻译和测试用例自动生成。无论是代码生成、翻译还是审查,Blackbox.ai都能高效智能地完成任务,成为开发者不可或缺的得力工具。现可免费试用90天高级模型,官网:&lt;https://www.blackbox.ai/&gt;。
328 14
『PyQt5-Qt Designer篇』| 07 Qt Designer中栅格布局和表单布局的使用
『PyQt5-Qt Designer篇』| 07 Qt Designer中栅格布局和表单布局的使用
338 0
|
Linux C++
【代码片段】Linux C++打印当前函数调用堆栈
【代码片段】Linux C++打印当前函数调用堆栈
424 0
|
Kubernetes 调度 Docker
k8s详细教程(一)
k8s详细教程(一)
548 0
|
Docker 容器
docker 不重启容器 设置 修改时区, 亲测有效
docker 不重启容器 设置 修改时区, 亲测有效
docker 不重启容器 设置 修改时区, 亲测有效
|
开发工具 Perl
VIVADO2022 sdk 工程创建流程
正点原子uart历程复现,csdn博客 本人搬运
539 0
|
开发框架 Android开发 开发者
flutter新引擎impller与skia的区别
flutter新引擎impller与skia的区别
flutter新引擎impller与skia的区别
|
JSON 负载均衡 Oracle
微服务框架:如果不用 Spring Boot,还可以选择谁?(1)
微服务框架:如果不用 Spring Boot,还可以选择谁?
371 0
微服务框架:如果不用 Spring Boot,还可以选择谁?(1)