提问：我想要安装最新版的ixgbe 10G网卡驱动。在CentOS, Fedora 或 RHEL中，我应该如何编译ixgbe驱动？
想要在linux使用Intel的PCI Express 10G网卡（例如，82598，82599，x540），需要安装Ixgbe驱动。如今的Linux发行版都会预安装ixgbe的可加载模块，但是预安装的ixgbe驱动不是完整功能版。如果想要开启和定制所有10G网卡的功能（如，RSS、多队列、虚拟化功能、硬件 offload 等），需要从源码编译安装。
本文基于红帽系平台（如，CentOS，RHEL或Fedora）。Debian系平台，请看这篇文章。
第一步: 安装依赖
首先，安装必要的开发环境和安装匹配的内核头文件
$ sudo yum install gcc make$ sudo yum install kernel-devel
第二步: 编译Ixgbe
从官方页面下载最新Ixgbe源码
$ wget http://downloads.sourceforge.net/project/e1000/ixgbe%20stable/3.23.2/ixgbe-3.23.2.tar.gz
请检查支持的内核版本。例如，Ixgbe3.23.2版本支持Linux内核版本2.6.18到3.18.1。
提取压缩包并编译：
$ tar -xvf ixgbe-3.23.2.tar.gz$ cd ixgbe-3.23.2/src$ make
如果成功，可以在当前目录找到编译完成的驱动（ixgbe.ko）。
可以运行这个命令来查看编译信息：
$ modinfo ./ixgbe.ko
将会输出一个Ixgbe驱动的可用参数列表
第三步: 加载 Ixgbe 驱动
这步准备加载已经编译好的驱动。
如果系统已经加载了Ixgbe驱动，首先需要卸载掉老版本。否则，新版本不能加载。
$ sudo rmmod ixgbe.ko
然后插入编译完成的驱动到内核中：
$ sudo insmod ./ixgbe.ko
同时，你可以设置启动参数
$ sudo insmod ./ixgbe.ko FdirPballoc=3 RSS=16
验证驱动是否加载成功，使用dmesg命令，查看其输出
$ dmesg
Intel(R) 10 Gigabit PCI Express Network Driver - version 3.23.2Copyright (c) 1999-2014 Intel Corporation.ixgbe 0000:21:00.0: PCI INT A -> GSI 64 (level, low) -> IRQ 64ixgbe 0000:21:00.0: setting latency timer to 64ixgbe: Receive-Side Scaling (RSS) set to 16ixgbe: Flow Director packet buffer allocation set to 3ixgbe: 0000:21:00.0: ixgbe_check_options: Flow Director will be allocated 256kB of packet bufferixgbe: 0000:21:00.0: ixgbe_check_options: FCoE Offload feature enabledixgbe 0000:21:00.0: irq 87 for MSI/MSI-Xixgbe 0000:21:00.0: irq 88 for MSI/MSI-Xixgbe 0000:21:00.0: irq 89 for MSI/MSI-Xixgbe 0000:21:00.0: irq 90 for MSI/MSI-Xixgbe 0000:21:00.0: irq 91 for MSI/MSI-Xixgbe 0000:21:00.0: irq 92 for MSI/MSI-Xixgbe 0000:21:00.0: irq 93 for MSI/MSI-Xixgbe 0000:21:00.0: irq 94 for MSI/MSI-Xixgbe 0000:21:00.0: irq 95 for MSI/MSI-Xixgbe 0000:21:00.0: irq 96 for MSI/MSI-Xixgbe 0000:21:00.0: irq 97 for MSI/MSI-Xixgbe 0000:21:00.0: irq 98 for MSI/MSI-Xixgbe 0000:21:00.0: irq 99 for MSI/MSI-Xixgbe 0000:21:00.0: irq 100 for MSI/MSI-Xixgbe 0000:21:00.0: irq 101 for MSI/MSI-Xixgbe 0000:21:00.0: irq 102 for MSI/MSI-Xixgbe 0000:21:00.0: irq 103 for MSI/MSI-Xixgbe 0000:21:00.0: eth3: DCA registration failed: -1ixgbe 0000:21:00.0: PCI Express bandwidth of 32GT/s availableixgbe 0000:21:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)ixgbe 0000:21:00.0: eth3: MAC: 2, PHY: 9, SFP+: 3, PBA No: E68793-006ixgbe 0000:21:00.0: 90:e2:ba:5b:e9:1cixgbe 0000:21:00.0: eth3: Enabled Features: RxQ: 16 TxQ: 16 FdirHash RSCixgbe 0000:21:00.0: eth3: Intel(R) 10 Gigabit Network Connectionixgbe 0000:21:00.1: PCI INT B -> GSI 68 (level, low) -> IRQ 68ixgbe 0000:21:00.1: setting latency timer to 64ixgbe: 0000:21:00.1: ixgbe_check_options: FCoE Offload feature enabledixgbe 0000:21:00.0: registered PHC device on eth3ixgbe 0000:21:00.1: irq 104 for MSI/MSI-Xixgbe 0000:21:00.1: irq 105 for MSI/MSI-Xixgbe 0000:21:00.1: irq 106 for MSI/MSI-Xixgbe 0000:21:00.1: irq 107 for MSI/MSI-Xixgbe 0000:21:00.1: irq 108 for MSI/MSI-Xixgbe 0000:21:00.1: irq 109 for MSI/MSI-Xixgbe 0000:21:00.1: irq 110 for MSI/MSI-Xixgbe 0000:21:00.1: irq 111 for MSI/MSI-Xixgbe 0000:21:00.1: irq 112 for MSI/MSI-Xixgbe 0000:21:00.1: irq 113 for MSI/MSI-Xixgbe 0000:21:00.1: irq 114 for MSI/MSI-Xixgbe 0000:21:00.1: irq 115 for MSI/MSI-Xixgbe 0000:21:00.1: irq 116 for MSI/MSI-Xixgbe 0000:21:00.1: irq 117 for MSI/MSI-Xixgbe 0000:21:00.1: irq 118 for MSI/MSI-Xixgbe 0000:21:00.1: irq 119 for MSI/MSI-Xixgbe 0000:21:00.1: irq 120 for MSI/MSI-Xixgbe 0000:21:00.1: irq 121 for MSI/MSI-Xixgbe 0000:21:00.1: irq 122 for MSI/MSI-Xixgbe 0000:21:00.1: irq 123 for MSI/MSI-Xixgbe 0000:21:00.1: irq 124 for MSI/MSI-Xixgbe 0000:21:00.1: irq 125 for MSI/MSI-Xixgbe 0000:21:00.1: irq 126 for MSI/MSI-Xixgbe 0000:21:00.1: irq 127 for MSI/MSI-Xixgbe 0000:21:00.1: irq 128 for MSI/MSI-Xixgbe 0000:21:00.1: irq 129 for MSI/MSI-Xixgbe 0000:21:00.1: irq 130 for MSI/MSI-Xixgbe 0000:21:00.1: irq 131 for MSI/MSI-Xixgbe 0000:21:00.1: irq 132 for MSI/MSI-Xixgbe 0000:21:00.1: irq 133 for MSI/MSI-Xixgbe 0000:21:00.1: irq 134 for MSI/MSI-Xixgbe 0000:21:00.1: irq 135 for MSI/MSI-Xixgbe 0000:21:00.1: irq 136 for MSI/MSI-Xixgbe 0000:21:00.1: irq 137 for MSI/MSI-Xixgbe 0000:21:00.1: irq 138 for MSI/MSI-Xixgbe 0000:21:00.1: irq 139 for MSI/MSI-Xixgbe 0000:21:00.1: irq 140 for MSI/MSI-Xixgbe 0000:21:00.1: irq 141 for MSI/MSI-Xixgbe 0000:21:00.1: irq 142 for MSI/MSI-Xixgbe 0000:21:00.1: irq 143 for MSI/MSI-Xixgbe 0000:21:00.1: irq 144 for MSI/MSI-Xixgbe 0000:21:00.1: irq 145 for MSI/MSI-Xixgbe 0000:21:00.1: irq 146 for MSI/MSI-Xixgbe 0000:21:00.1: irq 147 for MSI/MSI-Xixgbe 0000:21:00.1: irq 148 for MSI/MSI-Xixgbe 0000:21:00.1: irq 149 for MSI/MSI-Xixgbe 0000:21:00.1: irq 150 for MSI/MSI-Xixgbe 0000:21:00.1: irq 151 for MSI/MSI-Xixgbe 0000:21:00.1: irq 152 for MSI/MSI-XADDRCONF(NETDEV_UP): eth3: link is not ready8021q: adding VLAN 0 to HW filter on device eth3ixgbe 0000:21:00.1: eth4: DCA registration failed: -1ixgbe 0000:21:00.1: PCI Express bandwidth of 32GT/s availableixgbe 0000:21:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)ixgbe 0000:21:00.1: eth4: MAC: 2, PHY: 9, SFP+: 4, PBA No: E68793-006ixgbe 0000:21:00.1: 90:e2:ba:5b:e9:1eixgbe 0000:21:00.1: eth4: Enabled Features: RxQ: 48 TxQ: 48 FdirHash RSCixgbe 0000:21:00.1: eth4: Intel(R) 10 Gigabit Network Connectionixgbe 0000:21:00.0: eth3: detected SFP+: 3ixgbe 0000:21:00.1: registered PHC device on eth4ADDRCONF(NETDEV_UP): eth4: link is not ready8021q: adding VLAN 0 to HW filter on device eth4ixgbe 0000:21:00.1: eth4: detected SFP+: 4ixgbe 0000:21:00.0: eth3: NIC Link is Up 10 Gbps, Flow Control: RX/TXADDRCONF(NETDEV_CHANGE): eth3: link becomes readyixgbe 0000:21:00.1: eth4: NIC Link is Up 10 Gbps, Flow Control: RX/TXADDRCONF(NETDEV_CHANGE): eth4: link becomes readyeth3: no IPv6 routers presenteth4: no IPv6 routers present
第四步: 安装Ixgbe驱动
当确认驱动已经加载后，就可以安装驱动到系统中了
$ sudo make install
ixgbe.ko将会安装在下列目录
/lib/modules/<kernel-version>/kernel/drivers/net/ixgbe
此时，编译好的驱动将在启动时自动加载，也可以通过运行命令加载它：
$ sudo modprobe ixgbe
原文发布时间为：2015-06-03
本文来自云栖社区合作伙伴“Linux中国”
