环境
PostgreSQL 9.5 rc1
数据块大小为8KB
CentOS 6.x x64
zfsonlinux
3*aliflash
256G内存
32核 Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz
pg_xlog on ext4
ext4 mount option ( defaults,noatime,nodiratime,discard,nodelalloc,data=writeback,nobarrier )
$PGDATA on zfs
zfs优化
1. 块设备对齐
fdisk -c -u /dev/dfa
start 2048
end +(n*2048-1)
cd /sys/module/zfs/parameters/
1.1 关闭zfs prefetch，因为是OLTP系统，不需要prefetch。
echo 1 > zfs_prefetch_disable
1.2 修改ARC脏页一次被刷出的单位（太大会导致evict arc脏页时中断响应，建议16MB）
算法 : 系统内存 除以 2^zfs_arc_shrink_shift
所以当内存为256GB是，要配置为16MB，
zfs_arc_shrink_shift必须设置为14。
zfs下的性能约为XFS的75%.
echo 14 >
zfs_arc_shrink_shift
1.3 对于未使用ZLOG设备的zpool，可以将sync改为always
zfs set sync=always zp1/data01
zfs set sync=always zp1
3. zpool 参数
2.1 ashift和数据库的块大小对齐。这里PostgreSQL使用了默认的8KB。
所以ashift选择13。
2^13=8192
zpool create -o ashift=13 zp1 dfa1 dfb1 dfc1
4. zfs 参数
recordsize 对齐数据库块大小 = 8K
primarycache = metadata
secondarycache = none
atime = off
logbias = throughput (直接写数据，因为没有使用ZLOG，不需要用标准的)
5. postgresql 参数
listen_addresses = '0.0.0.0' # what IP address(es) to listen on;
port = 1921 # (change requires restart)
max_connections = 1000 # (change requires restart)
unix_socket_directories = '.' # comma-separated list of directories
shared_buffers = 32GB # min 128kB
maintenance_work_mem = 512MB # min 1MB
autovacuum_work_mem = 512MB # min 1MB, or -1 to use maintenance_work_mem
dynamic_shared_memory_type = posix # the default is the first option
bgwriter_delay = 10ms # 10-10000ms between rounds
wal_level = hot_standby # minimal, archive, hot_standby, or logical
synchronous_commit = off # synchronization level;
max_wal_size = 32GB
max_wal_senders = 10 # max number of walsender processes
max_replication_slots = 10 # max number of replication slots
hot_standby = on # "on" allows queries during recovery
wal_receiver_status_interval = 1s # send replies at least this often
hot_standby_feedback = on # send info from standby to prevent
random_page_cost = 1.0 # same scale as above
effective_cache_size = 256GB
log_destination = 'csvlog' # Valid values are combinations of
logging_collector = on # Enable capturing of stderr and csvlog
log_checkpoints = on
log_connections = on
log_disconnections = on
log_error_verbosity = verbose # terse, default, or verbose messages
log_timezone = 'PRC'
datestyle = 'iso, mdy'
timezone = 'PRC'
lc_messages = 'C' # locale for system error message
lc_monetary = 'C' # locale for monetary formatting
lc_numeric = 'C' # locale for number formatting
lc_time = 'C' # locale for time formatting
default_text_search_config = 'pg_catalog.english'
6. 测试PostgreSQL TPC-B
5亿 tpc-b测试数据
pgbench -i -s 5000
pgbench -M prepared -n -r -P 5 -c 48 -j 48 -T 7200
测试结果：
ZFS
XFS
附件
transaction type: TPC-B (sort of)
scaling factor: 5000
query mode: prepared
number of clients: 48
number of threads: 48
duration: 7200 s
number of transactions actually processed: 54221472
latency average: 6.370 ms
latency stddev: 13.424 ms
tps = 7530.645849 (including connections establishing)
tps = 7530.676229 (excluding connections establishing)
statement latencies in milliseconds:
0.006580 \set nbranches 1 * :scale
0.001856 \set ntellers 10 * :scale
0.001427 \set naccounts 100000 * :scale
0.002671 \setrandom aid 1 :naccounts
0.001598 \setrandom bid 1 :nbranches
0.001533 \setrandom tid 1 :ntellers
0.001618 \setrandom delta -5000 5000
0.146576 BEGIN;
3.357134 UPDATE pgbench_accounts SET abalance = abalance + :delta WHERE aid = :aid;
0.199865 SELECT abalance FROM pgbench_accounts WHERE aid = :aid;
1.036640 UPDATE pgbench_tellers SET tbalance = tbalance + :delta WHERE tid = :tid;
0.636415 UPDATE pgbench_branches SET bbalance = bbalance + :delta WHERE bid = :bid;
0.523942 INSERT INTO pgbench_history (tid, bid, aid, delta, mtime) VALUES (:tid, :bid, :aid, :delta, CURRENT_TIMESTAMP);
0.434377 END;XFS
transaction type: TPC-B (sort of)
scaling factor: 5000
query mode: prepared
number of clients: 48
number of threads: 48
duration: 7200 s
number of transactions actually processed: 78512059
latency average: 4.400 ms
latency stddev: 10.051 ms
tps = 10904.276312 (including connections establishing)
tps = 10904.307274 (excluding connections establishing)
statement latencies in milliseconds:
0.003500 \set nbranches 1 * :scale
0.000971 \set ntellers 10 * :scale
0.000787 \set naccounts 100000 * :scale
0.001327 \setrandom aid 1 :naccounts
0.001081 \setrandom bid 1 :nbranches
0.000894 \setrandom tid 1 :ntellers
0.000924 \setrandom delta -5000 5000
0.096122 BEGIN;
1.521620 UPDATE pgbench_accounts SET abalance = abalance + :delta WHERE aid = :aid;
0.121572 SELECT abalance FROM pgbench_accounts WHERE aid = :aid;
1.035498 UPDATE pgbench_tellers SET tbalance = tbalance + :delta WHERE tid = :tid;
0.631052 UPDATE pgbench_branches SET bbalance = bbalance + :delta WHERE bid = :bid;
0.524147 INSERT INTO pgbench_history (tid, bid, aid, delta, mtime) VALUES (:tid, :bid, :aid, :delta, CURRENT_TIMESTAMP);
0.450451 END;附件
1.
#modinfo zfs
filename: /lib/modules/3.18.24/extra/zfs/zfs.ko
version: 0.6.5.3-1
license: CDDL
author: OpenZFS on Linux
description: ZFS
srcversion: CEB8F91B3D53F4A2844D531
depends: spl,zcommon,znvpair,zavl,zunicode
vermagic: 3.18.24 SMP mod_unload modversions
parm: zvol_inhibit_dev:Do not create zvol device nodes (uint)
parm: zvol_major:Major number for zvol device (uint)
parm: zvol_max_discard_blocks:Max number of blocks to discard (ulong)
parm: zvol_prefetch_bytes:Prefetch N bytes at zvol start+end (uint)
parm: zio_delay_max:Max zio millisec delay before posting event (int)
parm: zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (int)
parm: zfs_sync_pass_deferred_free:Defer frees starting in this pass (int)
parm: zfs_sync_pass_dont_compress:Don't compress starting in this pass (int)
parm: zfs_sync_pass_rewrite:Rewrite new bps starting in this pass (int)
parm: zil_replay_disable:Disable intent logging replay (int)
parm: zfs_nocacheflush:Disable cache flushes (int)
parm: zil_slog_limit:Max commit bytes to separate log device (ulong)
parm: zfs_read_chunk_size:Bytes to read per chunk (long)
parm: zfs_immediate_write_sz:Largest data block to write to zil (long)
parm: zfs_dbgmsg_enable:Enable ZFS debug message log (int)
parm: zfs_dbgmsg_maxsize:Maximum ZFS debug log size (int)
parm: zfs_admin_snapshot:Enable mkdir/rmdir/mv in .zfs/snapshot (int)
parm: zfs_expire_snapshot:Seconds to expire .zfs/snapshot (int)
parm: zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int)
parm: zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int)
parm: zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int)
parm: zfs_vdev_max_active:Maximum number of active I/Os per vdev (int)
parm: zfs_vdev_async_write_active_max_dirty_percent:Async write concurrency max threshold (int)
parm: zfs_vdev_async_write_active_min_dirty_percent:Async write concurrency min threshold (int)
parm: zfs_vdev_async_read_max_active:Max active async read I/Os per vdev (int)
parm: zfs_vdev_async_read_min_active:Min active async read I/Os per vdev (int)
parm: zfs_vdev_async_write_max_active:Max active async write I/Os per vdev (int)
parm: zfs_vdev_async_write_min_active:Min active async write I/Os per vdev (int)
parm: zfs_vdev_scrub_max_active:Max active scrub I/Os per vdev (int)
parm: zfs_vdev_scrub_min_active:Min active scrub I/Os per vdev (int)
parm: zfs_vdev_sync_read_max_active:Max active sync read I/Os per vdev (int)
parm: zfs_vdev_sync_read_min_active:Min active sync read I/Os per vdev (int)
parm: zfs_vdev_sync_write_max_active:Max active sync write I/Os per vdev (int)
parm: zfs_vdev_sync_write_min_active:Min active sync write I/Os per vdev (int)
parm: zfs_vdev_mirror_switch_us:Switch mirrors every N usecs (int)
parm: zfs_vdev_scheduler:I/O scheduler (charp)
parm: zfs_vdev_cache_max:Inflate reads small than max (int)
parm: zfs_vdev_cache_size:Total size of the per-disk cache (int)
parm: zfs_vdev_cache_bshift:Shift size to inflate reads too (int)
parm: metaslabs_per_vdev:Divide added vdev into approximately (but no more than) this number of metaslabs (int)
parm: zfs_txg_timeout:Max seconds worth of delta per txg (int)
parm: zfs_read_history:Historic statistics for the last N reads (int)
parm: zfs_read_history_hits:Include cache hits in read history (int)
parm: zfs_txg_history:Historic statistics for the last N txgs (int)
parm: zfs_flags:Set additional debugging flags (uint)
parm: zfs_recover:Set to attempt to recover from fatal errors (int)
parm: zfs_free_leak_on_eio:Set to ignore IO errors during free and permanently leak the space (int)
parm: zfs_deadman_synctime_ms:Expiration time in milliseconds (ulong)
parm: zfs_deadman_enabled:Enable deadman timer (int)
parm: spa_asize_inflation:SPA size estimate multiplication factor (int)
parm: spa_slop_shift:Reserved free space in pool (int)
parm: spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp)
parm: zfs_autoimport_disable:Disable pool import at module load (int)
parm: spa_load_verify_maxinflight:Max concurrent traversal I/Os while verifying pool during import -X (int)
parm: spa_load_verify_metadata:Set to traverse metadata on pool import (int)
parm: spa_load_verify_data:Set to traverse data on pool import (int)
parm: metaslab_aliquot:allocation granularity (a.k.a. stripe size) (ulong)
parm: metaslab_debug_load:load all metaslabs when pool is first opened (int)
parm: metaslab_debug_unload:prevent metaslabs from being unloaded (int)
parm: metaslab_preload_enabled:preload potential metaslabs during reassessment (int)
parm: zfs_mg_noalloc_threshold:percentage of free space for metaslab group to allow allocation (int)
parm: zfs_mg_fragmentation_threshold:fragmentation for metaslab group to allow allocation (int)
parm: zfs_metaslab_fragmentation_threshold:fragmentation for metaslab to allow allocation (int)
parm: metaslab_fragmentation_factor_enabled:use the fragmentation metric to prefer less fragmented metaslabs (int)
parm: metaslab_lba_weighting_enabled:prefer metaslabs with lower LBAs (int)
parm: metaslab_bias_enabled:enable metaslab group biasing (int)
parm: zfs_zevent_len_max:Max event queue length (int)
parm: zfs_zevent_cols:Max event column width (int)
parm: zfs_zevent_console:Log events to the console (int)
parm: zfs_top_maxinflight:Max I/Os per top-level (int)
parm: zfs_resilver_delay:Number of ticks to delay resilver (int)
parm: zfs_scrub_delay:Number of ticks to delay scrub (int)
parm: zfs_scan_idle:Idle window in clock ticks (int)
parm: zfs_scan_min_time_ms:Min millisecs to scrub per txg (int)
parm: zfs_free_min_time_ms:Min millisecs to free per txg (int)
parm: zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int)
parm: zfs_no_scrub_io:Set to disable scrub I/O (int)
parm: zfs_no_scrub_prefetch:Set to disable scrub prefetching (int)
parm: zfs_free_max_blocks:Max number of blocks freed in one txg (ulong)
parm: zfs_dirty_data_max_percent:percent of ram can be dirty (int)
parm: zfs_dirty_data_max_max_percent:zfs_dirty_data_max upper bound as % of RAM (int)
parm: zfs_delay_min_dirty_percent:transaction delay threshold (int)
parm: zfs_dirty_data_max:determines the dirty space limit (ulong)
parm: zfs_dirty_data_max_max:zfs_dirty_data_max upper bound in bytes (ulong)
parm: zfs_dirty_data_sync:sync txg when this much dirty data (ulong)
parm: zfs_delay_scale:how quickly delay approaches infinity (ulong)
parm: zfs_max_recordsize:Max allowed record size (int)
parm: zfs_prefetch_disable:Disable all ZFS prefetching (int)
parm: zfetch_max_streams:Max number of streams per zfetch (uint)
parm: zfetch_min_sec_reap:Min time before stream reclaim (uint)
parm: zfetch_block_cap:Max number of blocks to fetch at a time (uint)
parm: zfetch_array_rd_sz:Number of bytes in a array_read (ulong)
parm: zfs_pd_bytes_max:Max number of bytes to prefetch (int)
parm: zfs_send_corrupt_data:Allow sending corrupt data (int)
parm: zfs_mdcomp_disable:Disable meta data compression (int)
parm: zfs_nopwrite_enabled:Enable NOP writes (int)
parm: zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int)
parm: zfs_dbuf_state_index:Calculate arc header index (int)
parm: zfs_arc_min:Min arc size (ulong)
parm: zfs_arc_max:Max arc size (ulong)
parm: zfs_arc_meta_limit:Meta limit for arc size (ulong)
parm: zfs_arc_meta_min:Min arc metadata (ulong)
parm: zfs_arc_meta_prune:Meta objects to scan for prune (int)
parm: zfs_arc_meta_adjust_restarts:Limit number of restarts in arc_adjust_meta (int)
parm: zfs_arc_meta_strategy:Meta reclaim strategy (int)
parm: zfs_arc_grow_retry:Seconds before growing arc size (int)
parm: zfs_arc_p_aggressive_disable:disable aggressive arc_p grow (int)
parm: zfs_arc_p_dampener_disable:disable arc_p adapt dampener (int)
parm: zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int)
parm: zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
parm: zfs_disable_dup_eviction:disable duplicate buffer eviction (int)
parm: zfs_arc_average_blocksize:Target average block size (int)
parm: zfs_arc_min_prefetch_lifespan:Min life of prefetch block (int)
parm: zfs_arc_num_sublists_per_state:Number of sublists used in each of the ARC state lists (int)
parm: l2arc_write_max:Max write bytes per interval (ulong)
parm: l2arc_write_boost:Extra write bytes during device warmup (ulong)
parm: l2arc_headroom:Number of max device writes to precache (ulong)
parm: l2arc_headroom_boost:Compressed l2arc_headroom multiplier (ulong)
parm: l2arc_feed_secs:Seconds between L2ARC writing (ulong)
parm: l2arc_feed_min_ms:Min feed interval in milliseconds (ulong)
parm: l2arc_noprefetch:Skip caching prefetched buffers (int)
parm: l2arc_nocompress:Skip compressing L2ARC buffers (int)
parm: l2arc_feed_again:Turbo L2ARC warmup (int)
parm: l2arc_norw:No reads during writes (int)
parm: zfs_arc_lotsfree_percent:System free memory I/O throttle in bytes (int)
parm: zfs_arc_sys_free:System free memory target size in bytes (ulong)
#zfs get all zp1/data01
NAME PROPERTY VALUE SOURCE
zp1/data01 type filesystem -
zp1/data01 creation Tue Dec 29 11:11 2015 -
zp1/data01 used 73.3G -
zp1/data01 available 5.01T -
zp1/data01 referenced 73.3G -
zp1/data01 compressratio 1.00x -
zp1/data01 mounted yes -
zp1/data01 quota none default
zp1/data01 reservation none default
zp1/data01 recordsize 8K inherited from zp1
zp1/data01 mountpoint /data01 local
zp1/data01 sharenfs off default
zp1/data01 checksum on default
zp1/data01 compression off default
zp1/data01 atime off inherited from zp1
zp1/data01 devices on default
zp1/data01 exec on default
zp1/data01 setuid on default
zp1/data01 readonly off default
zp1/data01 zoned off default
zp1/data01 snapdir hidden default
zp1/data01 aclinherit restricted default
zp1/data01 canmount on default
zp1/data01 xattr on default
zp1/data01 copies 1 default
zp1/data01 version 5 -
zp1/data01 utf8only off -
zp1/data01 normalization none -
zp1/data01 casesensitivity sensitive -
zp1/data01 vscan off default
zp1/data01 nbmand off default
zp1/data01 sharesmb off default
zp1/data01 refquota none default
zp1/data01 refreservation none default
zp1/data01 primarycache metadata local
zp1/data01 secondarycache none local
zp1/data01 usedbysnapshots 0 -
zp1/data01 usedbydataset 73.3G -
zp1/data01 usedbychildren 0 -
zp1/data01 usedbyrefreservation 0 -
zp1/data01 logbias throughput local
zp1/data01 dedup off default
zp1/data01 mlslabel none default
zp1/data01 sync standard default
zp1/data01 refcompressratio 1.00x -
zp1/data01 written 73.3G -
zp1/data01 logicalused 72.8G -
zp1/data01 logicalreferenced 72.8G -
zp1/data01 filesystem_limit none default
zp1/data01 snapshot_limit none default
zp1/data01 filesystem_count none default
zp1/data01 snapshot_count none default
zp1/data01 snapdev hidden default
zp1/data01 acltype off default
zp1/data01 context none default
zp1/data01 fscontext none default
zp1/data01 defcontext none default
zp1/data01 rootcontext none default
zp1/data01 relatime off default
zp1/data01 redundant_metadata all default
zp1/data01 overlay off default
#zpool get all zp1
NAME PROPERTY VALUE SOURCE
zp1 size 5.25T -
zp1 capacity 1% -
zp1 altroot - default
zp1 health ONLINE -
zp1 guid 5337829197153510332 default
zp1 version - default
zp1 bootfs - default
zp1 delegation on default
zp1 autoreplace off default
zp1 cachefile - default
zp1 failmode wait default
zp1 listsnapshots off default
zp1 autoexpand off default
zp1 dedupditto 0 default
zp1 dedupratio 1.00x -
zp1 free 5.18T -
zp1 allocated 74.1G -
zp1 readonly off -
zp1 ashift 13 local
zp1 comment - default
zp1 expandsize - -
zp1 freeing 0 default
zp1 fragmentation 5% -
zp1 leaked 0 default
zp1 feature@async_destroy enabled local
zp1 feature@empty_bpobj active local
zp1 feature@lz4_compress active local
zp1 feature@spacemap_histogram active local
zp1 feature@enabled_txg active local
zp1 feature@hole_birth active local
zp1 feature@extensible_dataset enabled local
zp1 feature@embedded_data active local
zp1 feature@bookmarks enabled local
zp1 feature@filesystem_limits enabled local
zp1 feature@large_blocks enabled local
