COMMAND DESCRIPTION
System information
arch show architecture of machine
uname -r show used kernel version
dmidecode -q show hardware system components - (SMBIOS / DMI)
hdaparm -i /dev/hda displays the characteristics of a hard-disk
hdparm -tT /dev/sda perform test reading on a hard-disk
cat /proc/cpuinfo show information CPU info
cat /proc/interrupts show interrupts
cat /proc/meminfo verify memory use
cat /proc/swaps show file(s) swap
cat /proc/version show version of the kernel
cat /proc/net/dev show network adpters and statistics
cat /proc/mounts show mounted file system(s)
lspci -tv display PCI devices
lsusb -tv show USB devices
date show system date
cal 2007 show the timetable of 2007
date 041217002007.00 set date and time - MonthDayhoursMinutesYear.Secondi
clock -w
save changes on BIOS
linux commands line v1.0 - LinuxGuide.it
Shutdown, Restart of a system and Logout
shutdown -h now shutdown system
init 0
shutdown -r hours:minutes & planned shutdown of the system
shutdown -c cancel a planned shutdown of the system
shutdown -r now reboot
reboot
logout leaving session
linux commands line v1.0 - LinuxGuide.it
Files and Directory
cd /home enter to directory '/ home'
cd .. go back one level
cd ../.. go back two levels
cd go to home directory
cd ~utente go to home directory
cd - go to previous directory
pwd show the path of work directory
ls view files of directory
ls -F view files of directory
ls -l show details of files and directory
ls -a show hidden files
ls *[0-9]* show files and directory containing numbers
lstree show files and directories in a tree starting from root
mkdir dir1 create a directory called 'dir1'
mkdir dir1 dir2 create two directories simultaneously
mkdir -p /tmp/dir1/dir2 create a directory tree
rm -f file1 delete file called 'file1'
rmdir dir1 delete directory called 'dir1'
rm -rf dir1 remove a directory called 'dir1' and contents recursively
rm -rf dir1 dir2 remove two directories and their contents recursively
mv dir1 new_dir rename / move a file or directory
cp file1 file2 copying a file
cp dir/* . copy all files of a directory within the current work directory
cp -a /tmp/dir1 . copy a directory within the current work directory
cp -a dir1 dir2 copy a directory
ln -s file1 lnk1 create a symbolic link to file or directory
ln file1 lnk1 create a physical link to file or directory
touch -t 0712250000 fileditest modify timestamp of a file or directory - (YYMMDDhhmm)
linux commands line v1.0 - LinuxGuide.it
File search
find / -name file1 search file and directory into root filesystem from '/'
find / -user user1 search files and directories belonging to 'user1'
find /home/user1 -name *.bin search files with '. bin' extension within directory '/ home/user1'
find /usr/bin -type f -atime +100 search bynary files are not used in the last 100 days
find /usr/bin -type f -mtime -10 search files created or changed within 10 days
find / -name *.rpm -exec chmod 755 {} ; search files with '.rpm' extension and modify permits
find / -name *.rpm -xdev search files with '.rpm' extension ignoring removable partitions as cdrom, pen-drive, etc.…
locate *.ps find files with the '.ps' extension - first run 'updatedb' command
whereis halt show location of a binary file, source or man
which halt show full path to a binary / executable
linux commands line v1.0 - LinuxGuide.it
Mounting a Filesystem
mount /dev/hda2 /mnt/hda2 mount disk called hda2 - verify existence of the directory '/ mnt/hda2'
umount /dev/hda2 unmount disk called hda2 - exit from mount point '/ mnt/hda2' first
fuser -km /mnt/hda2 force umount when the device is busy
umount -n /mnt/hda2 run umount without writing the file /etc/mtab - useful when the file is read-only or the hard disk is full
mount /dev/fd0 /mnt/floppy mount a floppy disk
mount /dev/cdrom /mnt/cdrom mount a cdrom / dvdrom
mount /dev/hdc /mnt/cdrecorder mount a cdrw / dvdrom
mount /dev/hdb /mnt/cdrecorder mount a cdrw / dvdrom
mount -o loop file.iso /mnt/cdrom mount a file or iso image
mount -t vfat /dev/hda5 /mnt/hda5 mount a Windows FAT32 file system
mount /dev/sda1 /mnt/usbdisk mount a usb pen-drive or flash-drive
mount -t smbfs -o username=user,password=pass //winclient/share /mnt/share mount a windows network share
linux commands line v1.0 - LinuxGuide.it
Disk Space
df -h show list of partitions mounted
ls -lSr |more show size of the files and directories ordered by size
du -sh dir1 estimate space used by directory 'dir1'
du -sh * | sort -rn show size of the files and directories sorted by size
rpm -q -a --qf '%10{SIZE}\t%{NAME}\n' | sort -k1,1n show space used by rpm packages installed sorted by size (fedora, redhat and like)
dpkg-query -W -f='${Installed-Size;10}\t${Package}\n' | sort -k1,1n show space used by deb packages installed sorted by size (ubuntu, debian and like)
linux commands line v1.0 - LinuxGuide.it
Users and Groups
groupadd group_name create a new group
groupdel group_name delete a group
groupmod -n new_group_name old_group_name rename a group
useradd -c "Nome Cognome" -g admin -d /home/user1 -s /bin/bash user1 create a new user belongs "admin" group
useradd user1 create a new user
userdel -r user1 delete a user ( '-r' eliminates home directory)
usermod -c "User FTP" -g system -d /ftp/user1 -s /bin/nologin user1 change user attributes
passwd change password
passwd user1 change a user password (only by root)
chage -E 2005-12-31 user1 set deadline for user password
pwck check correct syntax and file format of '/etc/passwd' and users existence
grpck check correct syntax and file format of '/etc/group' and groups existence
newgrp group_name log in to a new group to change default group of newly created files
linux commands line v1.0 - LinuxGuide.it
Permits on File - use "+" to set permissions and "-" to remove
ls -lh show permits
ls /tmp | pr -T5 -W$COLUMNS divide terminal into 5 columns
chmod ugo+rwx directory1 set permissions reading (r), write (w) and (x) access to users owner (u) group (g) and others (o)
chmod go-rwx directory1 remove permits reading (r), write (w) and (x) access to users group (g) and others (or
chown user1 file1 change owner of a file
chown user1 -R directory1 change user owner of a directory and all the files and directories contained inside
chgrp gruppo1 file1 change group of files
chown user1:gruppo1 file1 change user and group ownership of a file
find / -perm -u+s view all files on the system with SUID configured
chmod u+s /bin/file_eseguibile set SUID bit on a binary file - the user that running that file gets same privileges as owner
chmod u-s /bin/file_binario disable SUID bit on a binary file
chmod g+s /home/public set SGID bit on a directory - similar to SUID but for directory
chmod g-s /home/public disable SGID bit on a directory
chmod o+t /home/comune set STIKY bit on a directory - allows files deletion only to legitimate owners
chmod o-t /home/comune disable STIKY bit on a directory
linux commands line v1.0 - LinuxGuide.it
Special Attributes on file - use "+" to set permissions and "-" to remove
chattr +a file1 allows write opening of a file only append mode
chattr +c file1 allows that a file is compressed / decompressed automatically by the kernel
chattr +d file1 makes sure that the program ignores Dump the files during backup
chattr +i file1 makes it an immutable file, which can not be removed, altered, renamed or linked
chattr +s file1 allows a file to be deleted safely
chattr +S file1 makes sure that if a file is modified changes are written in synchronous mode as with sync
chattr +u file1 allows you to recover the contents of a file even if it is canceled
lsattr show specials attributes
linux commands line v1.0 - LinuxGuide.it
Archives and compressed files
bunzip2 file1.bz2 decompress a file called 'file1.bz2'
bzip2 file1 compress a file called 'file1'
gunzip file1.gz decompress a file called 'file1.gz'
gzip file1 compress a file called 'file1'
gzip -9 file1 compress with maximum compression
rar a file1.rar test_file create an archive rar called 'file1.rar'
rar a file1.rar file1 file2 dir1 compress 'file1', 'file2' and 'dir1' simultaneously
rar x file1.rar decompress rar archive
unrar x file1.rar decompress rar archive
tar -cvf archive.tar file1 create a uncompressed tarball
tar -cvf archive.tar file1 file2 dir1 create an archive containing 'file1', 'file2' and 'dir1'
tar -tf archive.tar show contents of an archive
tar -xvf archive.tar extract a tarball
tar -xvf archive.tar -C /tmp extract a tarball into / tmp
tar -cvfj archive.tar.bz2 dir1 create a tarball compressed into bzip2
tar -xvfj archive.tar.bz2 decompress a compressed tar archive in bzip2
tar -cvfz archive.tar.gz dir1 create a tarball compressed into gzip
tar -xvfz archive.tar.gz decompress a compressed tar archive in gzip
zip file1.zip file1 create an archive compressed in zip
zip -r file1.zip file1 file2 dir1 compress in zip several files and directories simultaneously
unzip file1.zip decompress a zip archive
linux commands line v1.0 - LinuxGuide.it
RPM Packages - Fedora, Red Hat and like
rpm -ivh package.rpm install a rpm package
rpm -ivh --nodeeps package.rpm install a rpm package ignoring dependencies requests
rpm -U package.rpm upgrade a rpm package without changing configuration files
rpm -F package.rpm upgrade a rpm package only if it is already installed
rpm -e package_name.rpm remove a rpm package
rpm -qa show all rpm packages installed on the system
rpm -qa | grep httpd show all rpm packages with the name "httpd"
rpm -qi package_name obtain information on a specific package installed
rpm -qg "System Environment/Daemons" show rpm packages of a group software
rpm -ql package_name show list of files provided by a rpm package installed
rpm -qc package_name show list of configuration files provided by a rpm package installed
rpm -q package_name --whatrequires show list of dependencies required for a rpm packet
rpm -q package_name --whatprovides show capability provided by a rpm package
rpm -q package_name --scripts show scripts started during installation / removal
rpm -q package_name --changelog show history of revisions of a rpm package
rpm -qf /etc/httpd/conf/httpd.conf verify which rpm package belongs to a given file
rpm -qp package.rpm -l show list of files provided by a rpm package not yet installed
rpm --import /media/cdrom/RPM-GPG-KEY import public-key digital signature
rpm --checksig package.rpm verify the integrity of a rpm package
rpm -qa gpg-pubkey verify integrity of all rpm packages installed
rpm -V package_name check file size, permissions, type, owner, group, MD5 checksum and last modification
rpm -Va check all rpm packages installed on the system - use with caution
rpm -Vp package.rpm verify a rpm package not yet installed
rpm2cpio package.rpm | cpio --extract --make-directories *bin* extract executable file from a rpm package
rpm -ivh /usr/src/redhat/RPMS/`arch`/package.rpm install a package built from a rpm source
rpmbuild --rebuild package_name.src.rpm build a rpm package from a rpm source
linux commands line v1.0 - LinuxGuide.it
YUM packages updater - Fedora, RedHat and like
yum install package_name download and install a rpm package
yum update update all rpm packages installed on the system
yum update package_name upgrade a rpm package
yum remove package_name remove a rpm package
yum list list all packages installed on the system
yum search package_name find a package on rpm repository
yum clean packages clean up rpm cache erasing downloaded packages
yum clean headers remove all files headers that the system uses to resolve dependency
yum clean all remove from the cache packages and headers files
linux commands line v1.0 - LinuxGuide.it
DEB packages - Debian, Ubuntu and like
dpkg -i package.deb install / upgrade a deb package
dpkg -r package_name remove a deb package from the system
dpkg -l show all deb packages installed on the system
dpkg -l | grep httpd show all rpm packages with the name "httpd"
dpkg -s package_name obtain information on a specific package installed on system
dpkg -L package_name show list of files provided by a package installed on system
dpkg --contents package.deb show list of files provided by a package not yet installed
dpkg -S /bin/ping verify which package belongs to a given file
linux commands line v1.0 - LinuxGuide.it
APT packages updater - Debian, Ubuntu e like
apt-get install package_name install / upgrade a deb package
apt-cdrom install package_name install / upgrade a deb package from cdrom
apt-get update update all deb packages installed on system
apt-get remove package_name remove a deb package from system
apt-get check verify correct resolution of dependencies
apt-get clean clean up cache from packages downloaded
linux commands line v1.0 - LinuxGuide.it
View file content
cat file1 view the contents of a file starting from the first row
tac file1 view the contents of a file starting from the last line
more file1 view content of a file along
less file1 similar to 'more' command but which allows backward movement in the file as well as forward movement
head -2 file1 view first two lines of a file
tail -2 file1 view last two lines of a file
tail -f /var/log/messages view in real time what is added to a file
linux commands line v1.0 - LinuxGuide.it
Text Manipulation
cat file_test | [operation: sed, grep, awk, grep, etc] > result.txt syntax to elaborate the text of a file, and write result to a new file
cat file_originale | [operazione: sed, grep, awk, grep, etc] >> result.txt syntax to elaborate the text of a file and append result in existing file
grep Aug /var/log/messages look up words "Aug" on file '/var/log/messages'
grep ^Aug /var/log/messages look up words that begin with "Aug" on file '/var/log/messages'
grep [0-9] /var/log/messages select from file '/var/log/messages' all lines that contain numbers
grep Aug -R /var/log/* search string "Aug" at directory '/var/log' and below
grep Aug /var/log/messages write result of a search within a file
sed 's/stringa1/stringa2/g' example.txt replace "string1" with "string2" in example.txt
sed '/^$/d' example.txt remove all blank lines from example.txt
sed '/ *#/d; /^ *$/d' example.txt remove comments and blank lines from example.txt
echo 'esempio' | tr '[:lower:]' '[:upper:]' convert from lower case in upper case
sed -e '1d' result.txt eliminates the first line from file example.txt
sed -n '/stringa1/p' view only lines that contain the word "string1"
sed -e 's/ *$//' example.txt remove empty characters at the end of each row
sed -e 's/stringa1//g' example.txt remove only the word "string1" from text and leave intact all
sed -n '1,5p;5q' example.txt view from 1th to 5th row
sed -n '5p;5q' example.txt view row number 5
sed -e 's/00*/0/g' example.txt replace more zeros with a single zero
cat -n file1 number row of a file
cat example.txt | awk 'NR%2==1' remove all even lines from example.txt
echo a b c | awk '{print $1}' view the first column of a line
echo a b c | awk '{print $1,$3}' view the first and third column of a line
paste file1 file2 merging contents of two files for columns
paste -d '+' file1 file2 merging contents of two files for columns with '+' delimiter on the center
sort file1 file2 sort contents of two files
sort file1 file2 | uniq sort contents of two files omitting lines repeated
sort file1 file2 | uniq -u sort contents of two files by viewing only unique line
sort file1 file2 | uniq -d sort contents of two files by viewing only duplicate line
comm -1 file1 file2 compare contents of two files by deleting only unique lines from 'file1'
comm -2 file1 file2 compare contents of two files by deleting only unique lines from 'file2'
comm -3 file1 file2 compare contents of two files by deleting only the lines that appear on both files
linux commands line v1.0 - LinuxGuide.it
Character set and Format file conversion
dos2unix filedos.txt fileunix.txt convert a text file format from MSDOS to UNIX
unix2dos fileunix.txt filedos.txt convert a text file format from UNIX to MSDOS
recode ..HTML page.html convert a text file to html
recode -l | more show all available formats conversion
linux commands line v1.0 - LinuxGuide.it
Filesystem Analysis
badblocks -v /dev/hda1 check bad blocks in disk hda1
fsck /dev/hda1 repair / check integrity of linux filesystem on disk hda1
fsck.ext2 /dev/hda1 repair / check integrity of ext2 filesystem on disk hda1
e2fsck /dev/hda1 repair / check integrity of ext2 filesystem on disk hda1
e2fsck -j /dev/hda1 repair / check integrity of ext3 filesystem on disk hda1
fsck.ext3 /dev/hda1 repair / check integrity of ext3 filesystem on disk hda1
fsck.vfat /dev/hda1 repair / check integrity of fat filesystem on disk hda1
fsck.msdos /dev/hda1 repair / check integrity of dos filesystem on disk hda1
dosfsck /dev/hda1 repair / check integrity of dos filesystems on disk hda1
linux commands line v1.0 - LinuxGuide.it
Format a Filesystem
mkfs /dev/hda1 create a filesystem type linux on hda1 partition
mke2fs /dev/hda1 create a filesystem type linux ext2 on hda1 partition
mke2fs -j /dev/hda1 create a filesystem type linux ext3 (journal) on hda1 partition
mkfs -t vfat 32 -F /dev/hda1 create a FAT32 filesystem
fdformat -n /dev/fd0 format a floppy disk
mkswap /dev/hda3 create a swap filesystem
linux commands line v1.0 - LinuxGuide.it
SWAP filesystem
mkswap /dev/hda3 create a swap filesystem
swapon /dev/hda3 activating a new swap partition
swapon /dev/hda2 /dev/hdb3 activate two swap partitions
linux commands line v1.0 - LinuxGuide.it
Backup
dump -0aj -f /tmp/home0.bak /home make a full backup of directory '/home'
dump -1aj -f /tmp/home0.bak /home make a incremental backup of directory '/home'
restore -if /tmp/home0.bak restoring a backup interactively
rsync -rogpav --delete /home /tmp synchronization between directories
rsync -rogpav -e ssh --delete /home ip_address:/tmp rsync via SSH tunnel
rsync -az -e ssh --delete ip_addr:/home/public /home/local synchronize a local directory with a remote directory via ssh and compression
rsync -az -e ssh --delete /home/local ip_addr:/home/public synchronize a remote directory with a local directory via ssh and compression
dd bs=1M if=/dev/hda | gzip | ssh
[email=user@ip_addr]user@ip_addr[/email]
'dd of=hda.gz' make a backup of a local hard disk on remote host via ssh
tar -Puf backup.tar /home/user make a incremental backup of directory '/home/user'
( cd /tmp/local/ && tar c . ) | ssh -C
[email=user@ip_addr]user@ip_addr[/email]
'cd /home/share/ && tar x -p' copy content of a directory on remote directory via ssh
( tar c /home ) | ssh -C
[email=user@ip_addr]user@ip_addr[/email]
'cd /home/backup-home && tar x -p' copy a local directory on remote directory via ssh
tar cf - . | (cd /tmp/backup ; tar xf - ) local copy preserving permits and links from a directory to another
find /home/user1 -name '*.txt' | xargs cp -av --target-directory=/home/backup/ --parents find and copy all files with '.txt' extention from a directory to another
find /var/log -name '*.log' | tar cv --files-from=- | bzip2 > log.tar.bz2 find all files with '.log' extention and make an bzip archive
dd if=/dev/hda of=/dev/fd0 bs=512 count=1 make a copy of MBR (Master Boot Record) to floppy
dd if=/dev/fd0 of=/dev/hda bs=512 count=1 restore MBR from backup copy saved to floppy
linux commands line v1.0 - LinuxGuide.it
CDROM
cdrecord -v gracetime=2 dev=/dev/cdrom -eject blank=fast -force clean a rewritable cdrom
mkisofs /dev/cdrom > cd.iso create an iso image of cdrom on disk
mkisofs /dev/cdrom | gzip > cd_iso.gz create a compressed iso image of cdrom on disk
mkisofs -J -allow-leading-dots -R -V "Label CD" -iso-level 4 -o ./cd.iso data_cd create an iso image of a directory
cdrecord -v dev=/dev/cdrom cd.iso burn an ISO image
gzip -dc cd_iso.gz | cdrecord dev=/dev/cdrom - burn a compressed ISO image
mount -o loop cd.iso /mnt/iso mount an ISO image
cd-paranoia -B rip audio tracks from a CD to wav files
cd-paranoia -- "-3" rip first three audio tracks from a CD to wav files
cdrecord --scanbus scan bus to identify the channel scsi
linux commands line v1.0 - LinuxGuide.it
Networking - LAN and WiFi
ifconfig eth0 show configuration of an ethernet network card
ifup eth0 activate an interface 'eth0'
ifdown eth0 disable an interface 'eth0'
ifconfig eth0 192.168.1.1 netmask 255.255.255.0 configure IP Address
ifconfig eth0 promisc configure 'eth0' in promiscuous mode to gather packets (sniffing)
dhclient eth0 active interface 'eth0' in dhcp mode
route -n show routing table
route add -net 0/0 gw IP_Gateway configura default gateway
route add -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.1.1 configure static route to reach network '192.168.0.0/16'
route del 0/0 gw IP_gateway remove static route
echo "1" > /proc/sys/net/ipv4/ip_forward activate ip routing
hostname show hostname
host
www.linuxguide.it
lookup hostname to resolve name to ip address and viceversa
ip link show show link status of all interfaces
mii-tool eth0 show link status of 'eth0'
ethtool eth0 show statistics of network card 'eth0'
netstat -tup show all active network connections and their PID
netstat -tupl show all network services listening on the system and their PID
tcpdump tcp port 80 show all HTTP traffic
iwlist scan show wireless networks
iwconfig eth1 show configuration of a wireless network card
linux commands line v1.0 - LinuxGuide.it
Microsoft Windows networks - SAMBA
nbtscan ip_addr netbios name resolution
nmblookup -A ip_addr netbios name resolution
smbclient -L ip_addr/hostname show remote shares of a windows host
smbget -Rr smb://ip_addr/share like wget can download files from a host windows via smb
mount -t smbfs -o username=user,password=pass //winclient/share /mnt/share mount a windows network share
linux commands line v1.0 - LinuxGuide.it
IPTABLES - firewall
iptables -t filter -L show all chains of filtering table
iptables -t nat -L show all chains of nat table
iptables -t filter -F clear all rules from filtering table
iptables -t nat -F clear all rules from table nat
iptables -t filter -X delete any chains created by user
iptables -t filter -A INPUT -p tcp --dport telnet -j ACCEPT allow telnet connections to input
iptables -t filter -A OUTPUT -p tcp --dport http -j DROP block HTTP connections to output
iptables -t filter -A FORWARD -p tcp --dport pop3 -j ACCEPT allow POP3 connections to forward chain
iptables -t filter -A INPUT -j LOG --log-prefix "DROP INPUT" logging sulla chain di input Logging on chain input
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE configure a PAT (Port Address Traslation) on eth0 masking outbound packets
iptables -t nat -A PREROUTING -d 192.168.0.1 -p tcp -m tcp --dport 22 -j DNAT --to-destination 10.0.0.2:22 redirect packets addressed to a host to another host
linux commands line v1.0 - LinuxGuide.it
Monitoring and debugging
top display linux tasks using most cpu
ps -eafw displays linux tasks
ps -e -o pid,args --forest displays linux tasks in a hierarchical mode
pstree mostra un albero dei processi sistema Shows a tree system processes
kill -9 ID_Processo force closure of the process and finish it
kill -1 ID_Processo force a process to reload configuration
lsof -p $$ display a list of files opened by processes
lsof /home/user1 displays a list of open files in a given path system
strace -c ls >/dev/null display system calls made and received by a process
strace -f -e open ls >/dev/null display library calls
watch -n1 'cat /proc/interrupts' display interrupts in real-time
last reboot show history reboot
lsmod display kernel loaded
free -m displays status of RAM in megabytes
smartctl -A /dev/hda monitoring reliability of a hard-disk through SMART
smartctl -i /dev/hda check if SMART is active on a hard-disk
tail /var/log/dmesg show events inherent to the process of booting kernel
tail /var/log/messages show system events
linux commands line v1.0 - LinuxGuide.it
Other useful commands
mkbootdisk --device /dev/fd0 `uname -r` create a boot floppy
gpg -c file1 encrypt a file with GNU Privacy Guard
gpg file1.gpg decrypt a file with GNU Privacy Guard
wget -r
www.example.com
download an entire web site
wget -c
www.example.com/file.iso
download a file with the ability to stop the download and resume later
echo 'wget -c
[url=http://www.example.com/files.iso']www.example.com/files.iso'[/url]
| at 09:00 start a download at any given time
ldd ssh show shared libraries required by ssh program
alias hh='history' set an alias for a command - hh = history
---------------------------------
系统信息 arch 显示机器的处理器架构(1) uname -m 显示机器的处理器架构(2) uname -r 显示正在使用的内核版本 dmidecode -q 显示硬件系统部件 - (SMBIOS / DMI) hdparm -i /dev/hda 罗列一个磁盘的架构特性 hdparm -tT /dev/sda 在磁盘上执行测试性读取操作
系统信息
arch 显示机器的处理器架构(1)
uname -m 显示机器的处理器架构(2)
uname -r 显示正在使用的内核版本
dmidecode -q 显示硬件系统部件 - (SMBIOS / DMI)
hdparm -i /dev/hda 罗列一个磁盘的架构特性
hdparm -tT /dev/sda 在磁盘上执行测试性读取操作
cat /proc/cpuinfo 显示CPU info的信息
cat /proc/interrupts 显示中断
cat /proc/meminfo 校验内存使用
cat /proc/swaps 显示哪些swap被使用
cat /proc/version 显示内核的版本
cat /proc/net/dev 显示网络适配器及统计
cat /proc/mounts 显示已加载的文件系统
lspci -tv 罗列 PCI 设备
lsusb -tv 显示 USB 设备
date 显示系统日期
cal 2007 显示2007年的日历表
date 041217002007.00 设置日期和时间 - 月日时分年.秒
clock -w 将时间修改保存到 BIOS
关机 (系统的关机、重启以及登出 )
shutdown -h now 关闭系统(1)
init 0 关闭系统(2)
telinit 0 关闭系统(3)
shutdown -h hours:minutes & 按预定时间关闭系统
shutdown -c 取消按预定时间关闭系统
shutdown -r now 重启(1)
reboot 重启(2)
logout 注销
文件和目录
cd /home 进入 '/ home' 目录'
cd .. 返回上一级目录
cd ../.. 返回上两级目录
cd 进入个人的主目录
cd ~user1 进入个人的主目录
cd - 返回上次所在的目录
pwd 显示工作路径
ls 查看目录中的文件
ls -F 查看目录中的文件
ls -l 显示文件和目录的详细资料
ls -a 显示隐藏文件
ls *[0-9]* 显示包含数字的文件名和目录名
tree 显示文件和目录由根目录开始的树形结构(1)
lstree 显示文件和目录由根目录开始的树形结构(2)
mkdir dir1 创建一个叫做 'dir1' 的目录'
mkdir dir1 dir2 同时创建两个目录
mkdir -p /tmp/dir1/dir2 创建一个目录树
rm -f file1 删除一个叫做 'file1' 的文件'
rmdir dir1 删除一个叫做 'dir1' 的目录'
rm -rf dir1 删除一个叫做 'dir1' 的目录并同时删除其内容
rm -rf dir1 dir2 同时删除两个目录及它们的内容
mv dir1 new_dir 重命名/移动 一个目录
cp file1 file2 复制一个文件
cp dir/* . 复制一个目录下的所有文件到当前工作目录
cp -a /tmp/dir1 . 复制一个目录到当前工作目录
cp -a dir1 dir2 复制一个目录
ln -s file1 lnk1 创建一个指向文件或目录的软链接
ln file1 lnk1 创建一个指向文件或目录的物理链接
touch -t 0712250000 file1 修改一个文件或目录的时间戳 - (YYMMDDhhmm)
file file1 outputs the mime type of the file as text
iconv -l 列出已知的编码
iconv -f fromEncoding -t toEncoding inputFile > outputFile creates a new from the given input file by assuming it is encoded in fromEncoding and converting it to toEncoding.
find . -maxdepth 1 -name *.jpg -print -exec convert "{}" -resize 80x60 "thumbs/{}" \; batch resize files in the current directory and send them to a thumbnails directory (requires convert from Imagemagick)
文件搜索
find / -name file1 从 '/' 开始进入根文件系统搜索文件和目录
find / -user user1 搜索属于用户 'user1' 的文件和目录
find /home/user1 -name \*.bin 在目录 '/ home/user1' 中搜索带有'.bin' 结尾的文件
find /usr/bin -type f -atime +100 搜索在过去100天内未被使用过的执行文件
find /usr/bin -type f -mtime -10 搜索在10天内被创建或者修改过的文件
find / -name \*.rpm -exec chmod 755 '{}' \; 搜索以 '.rpm' 结尾的文件并定义其权限
find / -xdev -name \*.rpm 搜索以 '.rpm' 结尾的文件，忽略光驱、捷盘等可移动设备
locate \*.ps 寻找以 '.ps' 结尾的文件 - 先运行 'updatedb' 命令
whereis halt 显示一个二进制文件、源码或man的位置
which halt 显示一个二进制文件或可执行文件的完整路径
挂载一个文件系统
mount /dev/hda2 /mnt/hda2 挂载一个叫做hda2的盘 - 确定目录 '/ mnt/hda2' 已经存在
umount /dev/hda2 卸载一个叫做hda2的盘 - 先从挂载点 '/ mnt/hda2' 退出
fuser -km /mnt/hda2 当设备繁忙时强制卸载
umount -n /mnt/hda2 运行卸载操作而不写入 /etc/mtab 文件- 当文件为只读或当磁盘写满时非常有用
mount /dev/fd0 /mnt/floppy 挂载一个软盘
mount /dev/cdrom /mnt/cdrom 挂载一个cdrom或dvdrom
mount /dev/hdc /mnt/cdrecorder 挂载一个cdrw或dvdrom
mount /dev/hdb /mnt/cdrecorder 挂载一个cdrw或dvdrom
mount -o loop file.iso /mnt/cdrom 挂载一个文件或ISO镜像文件
mount -t vfat /dev/hda5 /mnt/hda5 挂载一个Windows FAT32文件系统
mount /dev/sda1 /mnt/usbdisk 挂载一个usb 捷盘或闪存设备
mount -t smbfs -o username=user,password=pass //WinClient/share /mnt/share 挂载一个windows网络共享
磁盘空间
df -h 显示已经挂载的分区列表
ls -lSr |more 以尺寸大小排列文件和目录
du -sh dir1 估算目录 'dir1' 已经使用的磁盘空间'
du -sk * | sort -rn 以容量大小为依据依次显示文件和目录的大小
rpm -q -a --qf '%10{SIZE}t%{NAME}n' | sort -k1,1n 以大小为依据依次显示已安装的rpm包所使用的空间 (fedora, redhat类系统)
dpkg-query -W -f='${Installed-Size;10}t${Package}n' | sort -k1,1n 以大小为依据显示已安装的deb包所使用的空间 (ubuntu, debian类系统)
返回顶部索引 ^
用户和群组
groupadd group_name 创建一个新用户组
groupdel group_name 删除一个用户组
groupmod -n new_group_name old_group_name 重命名一个用户组
useradd -c "Name Surname " -g admin -d /home/user1 -s /bin/bash user1 创建一个属于 "admin" 用户组的用户
useradd user1 创建一个新用户
userdel -r user1 删除一个用户 ( '-r' 排除主目录)
usermod -c "User FTP" -g system -d /ftp/user1 -s /bin/nologin user1 修改用户属性
passwd 修改口令
passwd user1 修改一个用户的口令 (只允许root执行)
chage -E 2005-12-31 user1 设置用户口令的失效期限
pwck 检查 '/etc/passwd' 的文件格式和语法修正以及存在的用户
grpck 检查 '/etc/passwd' 的文件格式和语法修正以及存在的群组
newgrp group_name 登陆进一个新的群组以改变新创建文件的预设群组
返回顶部索引 ^
文件的权限 - 使用 "+" 设置权限，使用 "-" 用于取消
ls -lh 显示权限
ls /tmp | pr -T5 -W$COLUMNS 将终端划分成5栏显示
chmod ugo+rwx directory1 设置目录的所有人(u)、群组(g)以及其他人(o)以读（r ）、写(w)和执行(x)的权限
chmod go-rwx directory1 删除群组(g)与其他人(o)对目录的读写执行权限
chown user1 file1 改变一个文件的所有人属性
chown -R user1 directory1 改变一个目录的所有人属性并同时改变改目录下所有文件的属性
chgrp group1 file1 改变文件的群组
chown user1:group1 file1 改变一个文件的所有人和群组属性
find / -perm -u+s 罗列一个系统中所有使用了SUID控制的文件
chmod u+s /bin/file1 设置一个二进制文件的 SUID 位 - 运行该文件的用户也被赋予和所有者同样的权限
chmod u-s /bin/file1 禁用一个二进制文件的 SUID位
chmod g+s /home/public 设置一个目录的SGID 位 - 类似SUID ，不过这是针对目录的
chmod g-s /home/public 禁用一个目录的 SGID 位
chmod o+t /home/public 设置一个文件的 STIKY 位 - 只允许合法所有人删除文件
chmod o-t /home/public 禁用一个目录的 STIKY 位
返回顶部索引 ^
文件的特殊属性 - 使用 "+" 设置权限，使用 "-" 用于取消
chattr +a file1 只允许以追加方式读写文件
chattr +c file1 允许这个文件能被内核自动压缩/解压
chattr +d file1 在进行文件系统备份时，dump程序将忽略这个文件
chattr +i file1 设置成不可变的文件，不能被删除、修改、重命名或者链接
chattr +s file1 允许一个文件被安全地删除
chattr +S file1 一旦应用程序对这个文件执行了写操作，使系统立刻把修改的结果写到磁盘
chattr +u file1 若文件被删除，系统会允许你在以后恢复这个被删除的文件
lsattr 显示特殊的属性
返回顶部索引 ^
打包和压缩文件
bunzip2 file1.bz2 解压一个叫做 'file1.bz2'的文件
bzip2 file1 压缩一个叫做 'file1' 的文件
gunzip file1.gz 解压一个叫做 'file1.gz'的文件
gzip file1 压缩一个叫做 'file1'的文件
gzip -9 file1 最大程度压缩
rar a file1.rar test_file 创建一个叫做 'file1.rar' 的包
rar a file1.rar file1 file2 dir1 同时压缩 'file1', 'file2' 以及目录 'dir1'
rar x file1.rar 解压rar包
unrar x file1.rar 解压rar包
tar -cvf archive.tar file1 创建一个非压缩的 tarball
tar -cvf archive.tar file1 file2 dir1 创建一个包含了 'file1', 'file2' 以及 'dir1'的档案文件
tar -tf archive.tar 显示一个包中的内容
tar -xvf archive.tar 释放一个包
tar -xvf archive.tar -C /tmp 将压缩包释放到 /tmp目录下
tar -cvfj archive.tar.bz2 dir1 创建一个bzip2格式的压缩包
tar -xvfj archive.tar.bz2 解压一个bzip2格式的压缩包
tar -cvfz archive.tar.gz dir1 创建一个gzip格式的压缩包
tar -xvfz archive.tar.gz 解压一个gzip格式的压缩包
zip file1.zip file1 创建一个zip格式的压缩包
zip -r file1.zip file1 file2 dir1 将几个文件和目录同时压缩成一个zip格式的压缩包
unzip file1.zip 解压一个zip格式压缩包
返回顶部索引 ^
RPM 包 - （Fedora, Redhat及类似系统）
rpm -ivh package.rpm 安装一个rpm包
rpm -ivh --nodeeps package.rpm 安装一个rpm包而忽略依赖关系警告
rpm -U package.rpm 更新一个rpm包但不改变其配置文件
rpm -F package.rpm 更新一个确定已经安装的rpm包
rpm -e package_name.rpm 删除一个rpm包
rpm -qa 显示系统中所有已经安装的rpm包
rpm -qa | grep httpd 显示所有名称中包含 "httpd" 字样的rpm包
rpm -qi package_name 获取一个已安装包的特殊信息
rpm -qg "System Environment/Daemons" 显示一个组件的rpm包
rpm -ql package_name 显示一个已经安装的rpm包提供的文件列表
rpm -qc package_name 显示一个已经安装的rpm包提供的配置文件列表
rpm -q package_name --whatrequires 显示与一个rpm包存在依赖关系的列表
rpm -q package_name --whatprovides 显示一个rpm包所占的体积
rpm -q package_name --scripts 显示在安装/删除期间所执行的脚本l
rpm -q package_name --changelog 显示一个rpm包的修改历史
rpm -qf /etc/httpd/conf/httpd.conf 确认所给的文件由哪个rpm包所提供
rpm -qp package.rpm -l 显示由一个尚未安装的rpm包提供的文件列表
rpm --import /media/cdrom/RPM-GPG-KEY 导入公钥数字证书
rpm --checksig package.rpm 确认一个rpm包的完整性
rpm -qa gpg-pubkey 确认已安装的所有rpm包的完整性
rpm -V package_name 检查文件尺寸、 许可、类型、所有者、群组、MD5检查以及最后修改时间
rpm -Va 检查系统中所有已安装的rpm包- 小心使用
rpm -Vp package.rpm 确认一个rpm包还未安装
rpm2cpio package.rpm | cpio --extract --make-directories *bin* 从一个rpm包运行可执行文件
rpm -ivh /usr/src/redhat/RPMS/`arch`/package.rpm 从一个rpm源码安装一个构建好的包
rpmbuild --rebuild package_name.src.rpm 从一个rpm源码构建一个 rpm 包
返回顶部索引 ^
YUM 软件包升级器 - （Fedora, RedHat及类似系统）
yum install package_name 下载并安装一个rpm包
yum localinstall package_name.rpm 将安装一个rpm包，使用你自己的软件仓库为你解决所有依赖关系
yum update package_name.rpm 更新当前系统中所有安装的rpm包
yum update package_name 更新一个rpm包
yum remove package_name 删除一个rpm包
yum list 列出当前系统中安装的所有包
yum search package_name 在rpm仓库中搜寻软件包
yum clean packages 清理rpm缓存删除下载的包
yum clean headers 删除所有头文件
yum clean all 删除所有缓存的包和头文件
返回顶部索引 ^
DEB 包 (Debian, Ubuntu 以及类似系统)
dpkg -i package.deb 安装/更新一个 deb 包
dpkg -r package_name 从系统删除一个 deb 包
dpkg -l 显示系统中所有已经安装的 deb 包
dpkg -l | grep httpd 显示所有名称中包含 "httpd" 字样的deb包
dpkg -s package_name 获得已经安装在系统中一个特殊包的信息
dpkg -L package_name 显示系统中已经安装的一个deb包所提供的文件列表
dpkg --contents package.deb 显示尚未安装的一个包所提供的文件列表
dpkg -S /bin/ping 确认所给的文件由哪个deb包提供
返回顶部索引 ^
APT 软件工具 (Debian, Ubuntu 以及类似系统)
apt-get install package_name 安装/更新一个 deb 包
apt-cdrom install package_name 从光盘安装/更新一个 deb 包
apt-get update 升级列表中的软件包
apt-get upgrade 升级所有已安装的软件
apt-get remove package_name 从系统删除一个deb包
apt-get check 确认依赖的软件仓库正确
apt-get clean 从下载的软件包中清理缓存
apt-cache search searched-package 返回包含所要搜索字符串的软件包名称
返回顶部索引 ^
查看文件内容
cat file1 从第一个字节开始正向查看文件的内容
tac file1 从最后一行开始反向查看一个文件的内容
more file1 查看一个长文件的内容
less file1 类似于 'more' 命令，但是它允许在文件中和正向操作一样的反向操作
head -2 file1 查看一个文件的前两行
tail -2 file1 查看一个文件的最后两行
tail -f /var/log/messages 实时查看被添加到一个文件中的内容
返回顶部索引 ^
文本处理
cat file1 file2 ... | command <> file1_in.txt_or_file1_out.txt general syntax for text manipulation using PIPE, STDIN and STDOUT
cat file1 | command( sed, grep, awk, grep, etc...) > result.txt 合并一个文件的详细说明文本，并将简介写入一个新文件中
cat file1 | command( sed, grep, awk, grep, etc...) >> result.txt 合并一个文件的详细说明文本，并将简介写入一个已有的文件中
grep Aug /var/log/messages 在文件 '/var/log/messages'中查找关键词"Aug"
grep ^Aug /var/log/messages 在文件 '/var/log/messages'中查找以"Aug"开始的词汇
grep [0-9] /var/log/messages 选择 '/var/log/messages' 文件中所有包含数字的行
grep Aug -R /var/log/* 在目录 '/var/log' 及随后的目录中搜索字符串"Aug"
sed 's/stringa1/stringa2/g' example.txt 将example.txt文件中的 "string1" 替换成 "string2"
sed '/^$/d' example.txt 从example.txt文件中删除所有空白行
sed '/ *#/d; /^$/d' example.txt 从example.txt文件中删除所有注释和空白行
echo 'esempio' | tr '[:lower:]' '[:upper:]' 合并上下单元格内容
sed -e '1d' result.txt 从文件example.txt 中排除第一行
sed -n '/stringa1/p' 查看只包含词汇 "string1"的行
sed -e 's/ *$//' example.txt 删除每一行最后的空白字符
sed -e 's/stringa1//g' example.txt 从文档中只删除词汇 "string1" 并保留剩余全部
sed -n '1,5p;5q' example.txt 查看从第一行到第5行内容
sed -n '5p;5q' example.txt 查看第5行
sed -e 's/00*/0/g' example.txt 用单个零替换多个零
cat -n file1 标示文件的行数
cat example.txt | awk 'NR%2==1' 删除example.txt文件中的所有偶数行
echo a b c | awk '{print $1}' 查看一行第一栏
echo a b c | awk '{print $1,$3}' 查看一行的第一和第三栏
paste file1 file2 合并两个文件或两栏的内容
paste -d '+' file1 file2 合并两个文件或两栏的内容，中间用"+"区分
sort file1 file2 排序两个文件的内容
sort file1 file2 | uniq 取出两个文件的并集(重复的行只保留一份)
sort file1 file2 | uniq -u 删除交集，留下其他的行
sort file1 file2 | uniq -d 取出两个文件的交集(只留下同时存在于两个文件中的文件)
comm -1 file1 file2 比较两个文件的内容只删除 'file1' 所包含的内容
comm -2 file1 file2 比较两个文件的内容只删除 'file2' 所包含的内容
comm -3 file1 file2 比较两个文件的内容只删除两个文件共有的部分
返回顶部索引 ^
字符设置和文件格式转换
dos2unix filedos.txt fileunix.txt 将一个文本文件的格式从MSDOS转换成UNIX
unix2dos fileunix.txt filedos.txt 将一个文本文件的格式从UNIX转换成MSDOS
recode ..HTML < page.txt > page.html 将一个文本文件转换成html
recode -l | more 显示所有允许的转换格式
返回顶部索引 ^
文件系统分析
badblocks -v /dev/hda1 检查磁盘hda1上的坏磁块
fsck /dev/hda1 修复/检查hda1磁盘上linux文件系统的完整性
fsck.ext2 /dev/hda1 修复/检查hda1磁盘上ext2文件系统的完整性
e2fsck /dev/hda1 修复/检查hda1磁盘上ext2文件系统的完整性
e2fsck -j /dev/hda1 修复/检查hda1磁盘上ext3文件系统的完整性
fsck.ext3 /dev/hda1 修复/检查hda1磁盘上ext3文件系统的完整性
fsck.vfat /dev/hda1 修复/检查hda1磁盘上fat文件系统的完整性
fsck.msdos /dev/hda1 修复/检查hda1磁盘上dos文件系统的完整性
dosfsck /dev/hda1 修复/检查hda1磁盘上dos文件系统的完整性
返回顶部索引 ^
初始化一个文件系统
mkfs /dev/hda1 在hda1分区创建一个文件系统
mke2fs /dev/hda1 在hda1分区创建一个linux ext2的文件系统
mke2fs -j /dev/hda1 在hda1分区创建一个linux ext3(日志型)的文件系统
mkfs -t vfat 32 -F /dev/hda1 创建一个 FAT32 文件系统
fdformat -n /dev/fd0 格式化一个软盘
mkswap /dev/hda3 创建一个swap文件系统
返回顶部索引 ^
SWAP文件系统
mkswap /dev/hda3 创建一个swap文件系统
swapon /dev/hda3 启用一个新的swap文件系统
swapon /dev/hda2 /dev/hdb3 启用两个swap分区
返回顶部索引 ^
备份
dump -0aj -f /tmp/home0.bak /home 制作一个 '/home' 目录的完整备份
dump -1aj -f /tmp/home0.bak /home 制作一个 '/home' 目录的交互式备份
restore -if /tmp/home0.bak 还原一个交互式备份
rsync -rogpav --delete /home /tmp 同步两边的目录
rsync -rogpav -e ssh --delete /home ip_address:/tmp 通过SSH通道rsync
rsync -az -e ssh --delete ip_addr:/home/public /home/local 通过ssh和压缩将一个远程目录同步到本地目录
rsync -az -e ssh --delete /home/local ip_addr:/home/public 通过ssh和压缩将本地目录同步到远程目录
dd bs=1M if=/dev/hda | gzip | ssh user@ip_addr 'dd of=hda.gz' 通过ssh在远程主机上执行一次备份本地磁盘的操作
dd if=/dev/sda of=/tmp/file1 备份磁盘内容到一个文件
tar -Puf backup.tar /home/user 执行一次对 '/home/user' 目录的交互式备份操作
( cd /tmp/local/ && tar c . ) | ssh -C user@ip_addr 'cd /home/share/ && tar x -p' 通过ssh在远程目录中复制一个目录内容
( tar c /home ) | ssh -C user@ip_addr 'cd /home/backup-home && tar x -p' 通过ssh在远程目录中复制一个本地目录
tar cf - . | (cd /tmp/backup ; tar xf - ) 本地将一个目录复制到另一个地方，保留原有权限及链接
find /home/user1 -name '*.txt' | xargs cp -av --target-directory=/home/backup/ --parents 从一个目录查找并复制所有以 '.txt' 结尾的文件到另一个目录
find /var/log -name '*.log' | tar cv --files-from=- | bzip2 > log.tar.bz2 查找所有以 '.log' 结尾的文件并做成一个bzip包
dd if=/dev/hda of=/dev/fd0 bs=512 count=1 做一个将 MBR (Master Boot Record)内容复制到软盘的动作
dd if=/dev/fd0 of=/dev/hda bs=512 count=1 从已经保存到软盘的备份中恢复MBR内容
返回顶部索引 ^
光盘
cdrecord -v gracetime=2 dev=/dev/cdrom -eject blank=fast -force 清空一个可复写的光盘内容
mkisofs /dev/cdrom > cd.iso 在磁盘上创建一个光盘的iso镜像文件
mkisofs /dev/cdrom | gzip > cd_iso.gz 在磁盘上创建一个压缩了的光盘iso镜像文件
mkisofs -J -allow-leading-dots -R -V "Label CD" -iso-level 4 -o ./cd.iso data_cd 创建一个目录的iso镜像文件
cdrecord -v dev=/dev/cdrom cd.iso 刻录一个ISO镜像文件
gzip -dc cd_iso.gz | cdrecord dev=/dev/cdrom - 刻录一个压缩了的ISO镜像文件
mount -o loop cd.iso /mnt/iso 挂载一个ISO镜像文件
cd-paranoia -B 从一个CD光盘转录音轨到 wav 文件中
cd-paranoia -- "-3" 从一个CD光盘转录音轨到 wav 文件中（参数-3）
cdrecord --scanbus 扫描总线以识别scsi通道
dd if=/dev/hdc | md5sum 校验一个设备的md5sum编码，例如一张 CD
返回顶部索引 ^
网络 - （以太网和WIFI无线）
ifconfig eth0 显示一个以太网卡的配置
ifup eth0 启用一个 'eth0' 网络设备
ifdown eth0 禁用一个 'eth0' 网络设备
ifconfig eth0 192.168.1.1 netmask 255.255.255.0 控制IP地址
ifconfig eth0 promisc 设置 'eth0' 成混杂模式以嗅探数据包 (sniffing)
dhclient eth0 以dhcp模式启用 'eth0'
route -n show routing table
route add -net 0/0 gw IP_Gateway configura default gateway
route add -net 192.168.0.0 netmask 255.255.0.0 gw 192.168.1.1 configure static route to reach network '192.168.0.0/16'
route del 0/0 gw IP_gateway remove static route
echo "1" > /proc/sys/net/ipv4/ip_forward activate ip routing
hostname show hostname of system
host www.example.com lookup hostname to resolve name to ip address and viceversa(1)
nslookup www.example.com lookup hostname to resolve name to ip address and viceversa(2)
ip link show show link status of all interfaces
mii-tool eth0 show link status of 'eth0'
ethtool eth0 show statistics of network card 'eth0'
netstat -tup show all active network connections and their PID
netstat -tupl show all network services listening on the system and their PID
tcpdump tcp port 80 show all HTTP traffic
iwlist scan show wireless networks
iwconfig eth1 show configuration of a wireless network card
hostname show hostname
host www.example.com lookup hostname to resolve name to ip address and viceversa
nslookup www.example.com lookup hostname to resolve name to ip address and viceversa
whois www.example.com lookup on Whois database
GO TOP INDEX ^
Microsoft Windows networks (SAMBA)
nbtscan ip_addr netbios name resolution
nmblookup -A ip_addr netbios name resolution
smbclient -L ip_addr/hostname show remote shares of a windows host
smbget -Rr smb://ip_addr/share like wget can download files from a host windows via smb
mount -t smbfs -o username=user,password=pass //WinClient/share /mnt/share mount a windows network share
参考 http://www.php100.com/html/webkaifa/Linux/2009/1106/3485.html
http://linux.chinaunix.net/techdoc/system/2009/07/03/1121900.shtml
