JBoss做成Redhat系统服务

[root@vm2 ~]# cp  $JBOSS_HOME/bin/jboss_init_redhat.sh /etc/rc.d/init.d/jboss

[root@vm2 ~]# chmod 755 /etc/rc.d/init.d/jboss

#!/bin/sh 
# 
# $Id: jboss_init_redhat.sh 46554 2006-07-28 10:29:13Z dimitris $ 
# 
# JBoss Control Script 
# 
# To use this script run it as root - it will switch to the specified user 
# 
# Here is a little (and extremely primitive) startup/shutdown script 
# for RedHat systems. It assumes that JBoss lives in /usr/local/jboss, 
# it's run by user 'jboss' and JDK binaries are in /usr/local/jdk/bin. 
# All this can be changed in the script itself.  
# 
# Either modify this script for your requirements or just ensure that 
# the following variables are set correctly before calling the script. 

#换成你本机jboss的安装目录 
JBOSS_HOME=${JBOSS_HOME:-" /home/jboss/jboss-4.0.5.GA"} 

#换成你新建的jboss用户 
JBOSS_USER=${JBOSS_USER:-" jboss"} 

#换成本地java路径 
JAVAPTH=${JAVAPTH:-" /home/jboss/jdk1.5.0_14/bin"} 

#启动的配置参数，有3个值： 'minimal', 'default', 'all'，all是集群模式的配置 
JBOSS_CONF=${JBOSS_CONF:-" default"} 

#这里是绑定所有的网卡，如果绑一个，就写你的IP地址。只在jboss4.2.0+的版本对外使用时才使用。 
#JBOSS_HOST=${JBOSS_HOST:-" 0.0.0.0"} 

#默认的关闭脚本，好像不太好用，我就没用 
#JBOSSCP=${JBOSSCP:-"$JBOSS_HOME/bin/shutdown.jar:$JBOSS_HOME/client/jnet.jar"}

#jboss4.2.0+版本对外服务绑定Ip的时候的关闭脚本 
#JBOSSCP=${JBOSSCP:-"$JBOSS_HOME/bin/shutdown.sh -S -s $JBOSS_HOST"}

#jboss关闭脚本 
JBOSSCP=${JBOSSCP:-"$JBOSS_HOME/bin/shutdown.sh -S"} 

#这是jboss4.2.0+版本对外服务时的启动 
#JBOSSSH=${JBOSSSH:-"$JBOSS_HOME/bin/run.sh -c $JBOSS_CONF -b $JBOSS_HOST"}

#jboss启动 
JBOSSSH=${JBOSSSH:-"$JBOSS_HOME/bin/run.sh -c $JBOSS_CONF"} 

if [ "$JBOSS_USER" = "RUNASIS" ]; then 
  SUBIT="" 
else 
  SUBIT="su - $JBOSS_USER -c " 
fi 

if [ -n "$JBOSS_CONSOLE" -a ! -d "$JBOSS_CONSOLE" ]; then 
  # ensure the file exists 
  touch $JBOSS_CONSOLE 
  if [ ! -z "$SUBIT" ]; then 
    chown $JBOSS_USER $JBOSS_CONSOLE 
  fi  
fi 

if [ -n "$JBOSS_CONSOLE" -a ! -f "$JBOSS_CONSOLE" ]; then 
  echo "WARNING: location for saving console log invalid: $JBOSS_CONSOLE" 
#自启动日志

# echo "WARNING: ignoring it and using /dev/null" 
  echo "WARNING: ignoring it and using $JBOSS_HOME/jbossAutoStart.log" 
  
#自启动日志

#JBOSS_CONSOLE="/dev/null" 
  JBOSS_CONSOLE=${JBOSS_CONSOLE:-"$JBOSS_HOME/jbossAutoStart.log"} 
fi 

#自启动日志 
#JBOSS_CONSOLE=${JBOSS_CONSOLE:-"/dev/null"} 
JBOSS_CONSOLE=${JBOSS_CONSOLE:-"$JBOSS_HOME/jbossAutoStart.log"} 

JBOSS_CMD_START="cd $JBOSS_HOME/bin; $JBOSSSH"

#这个是默认的，跟上面的一样，不太好用
#JBOSS_CMD_STOP=${JBOSS_CMD_STOP:-"java -classpath $JBOSSCP org.jboss.Shutdown --shutdown -S"}

#我自己用的关闭方式
JBOSS_CMD_STOP=${JBOSS_CMD_STOP:-"cd $JBOSS_HOME/bin; $JBOSSCP"} 

if [ -z "`echo $PATH | grep $JAVAPTH`" ]; then 
  export PATH=$PATH:$JAVAPTH 
fi 

if [ ! -d "$JBOSS_HOME" ]; then 
  echo JBOSS_HOME does not exist as a valid directory : $JBOSS_HOME 
  exit 1 
fi 
#这是默认的控制台打印启动脚本命令，很不爽，就关了
#echo JBOSS_CMD_START = $JBOSS_CMD_START 

case "$1" in 
start) 
    echo "JBoss start.........." 
    cd $JBOSS_HOME/bin 
    if [ -z "$SUBIT" ]; then 
        eval $JBOSS_CMD_START >${JBOSS_CONSOLE} 2>&1 & 
    else 
        $SUBIT "$JBOSS_CMD_START >${JBOSS_CONSOLE} 2>&1 &"  
    fi 
    ;; 
stop) 
    echo "JBoss stop........." 
    if [ -z "$SUBIT" ]; then 
        $JBOSS_CMD_STOP 
    else 
        $SUBIT "$JBOSS_CMD_STOP" 
    fi  
    ;; 
restart) 
    echo "JBoss restart........" 
    $0 stop 
    sleep 60 
    $0 start 
    ;; 
*) 
    echo "usage: $0 (start|stop|restart|help)" 
esac