|
{
clkdiv = clk_power->CLKDIVN;
camdiv = clk_power->CAMDIVN;
/* work out clock scalings */
switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
case S3C2440_CLKDIVN_HDIVN_1:
hdiv = 1;
break;
case S3C2440_CLKDIVN_HDIVN_2:
hdiv = 2;
break;
case S3C2440_CLKDIVN_HDIVN_4_8:
hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
break;
case S3C2440_CLKDIVN_HDIVN_3_6:
hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
break;
}
return get_FCLK() / hdiv;
}
}
/* return PCLK frequency */
ulong get_PCLK(void)
{
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
unsigned long clkdiv;
unsigned long camdiv;
int hdiv = 1;
/* support both of S3C2410 and S3C2440 */
if (gd->bd->bi_arch_number == MACH_TYPE_SMDK2410)
return((clk_power->CLKDIVN & 0x1) ? get_HCLK()/2 : get_HCLK());
else
{
clkdiv = clk_power->CLKDIVN;
camdiv = clk_power->CAMDIVN;
/* work out clock scalings */
switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
case S3C2440_CLKDIVN_HDIVN_1:
hdiv = 1;
break;
case S3C2440_CLKDIVN_HDIVN_2:
hdiv = 2;
break;
case S3C2440_CLKDIVN_HDIVN_4_8:
hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
break;
case S3C2440_CLKDIVN_HDIVN_3_6:
hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
break;
}
return get_FCLK() / hdiv / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1);
}
}
(3)
common/env_nand.c
//
puts ("*** Warning - bad CRC or NAND, using default environment\n\n");
//HJ_del
注释此句
(4)
include/nand.h
struct nand_write_options {
结构体中添加
int skipfirstblk; /* if true, skip the first good block*/
(5)
include/s3c2410.h
添加：
/* for s3c2440, www.top-e.org */
static inline S3C2440_NAND * const S3C2440_GetBase_NAND(void)
{
return (S3C2440_NAND * const)S3C2410_NAND_BASE;
}
5.增加函数实现
(1)
common/cmd_load.c
【
1
】增加函数声明
/* support xmodem*/
static ulong load_serial_xmodem (ulong offset);
并后面添加其函数实现：
/* support xmodem */
static ulong load_serial_xmodem (ulong offset)
{
int size;
char buf[32];
int err;
int res;
connection_info_t info;
char xmodemBuf[1024];
ulong store_addr = ~0;
ulong addr = 0;
size = 0;
info.mode = xyzModem_xmodem;
res = xyzModem_stream_open (&info, &err);
if (!res) {
while ((res =
xyzModem_stream_read (xmodemBuf, 1024, &err)) > 0) {
store_addr = addr + offset;
size += res;
addr += res;
#ifndef CFG_NO_FLASH
if (addr2info (store_addr)) {
int rc;
rc = flash_write ((char *) xmodemBuf,
store_addr, res);
if (rc != 0) {
flash_perror (rc);
return (~0);
}
} else
#endif
{
memcpy ((char *) (store_addr), xmodemBuf,
res);
}
}
|
本文转自 chen138 51CTO博客，原文链接：http://blog.51cto.com/chenboqiang/267035，如需转载请自行联系原作者
