(转)Image Segmentation with Tensorflow using CNNs and Conditional Random Fields

简介: Daniil's blogMachine Learning and Computer Vision artisan.About/ Blog/Image Segmentation with Tensorflow using CNNs and Conditional Random ...

Daniil's blog

Machine Learning and Computer Vision artisan.

Image Segmentation with Tensorflow using CNNs and Conditional Random Fields

Tensorflow and TF-Slim | 

A post showing how to perform Image Segmentation with a recently released TF-Slim library and pretrained models. It covers the training and post-processing using Conditional Random Fields.


Introduction

In the previous post, we implemented the upsampling and made sure it is correct by comparing it to the implementation of the scikit-image library. To be more specific we had FCN-32 Segmentation network implemented which is described in the paper Fully convolutional networks for semantic segmentation.

In this post we will perform a simple training: we will get a sample image fromPASCAL VOC dataset along with annotation, train our network on them and test our network on the same image. It was done this way so that it can also be run on CPU – it takes only 10 iterations for the training to complete. Another point of this post is to show that segmentation that our network (FCN-32s) produces is very coarse – even if we run it on the same image that we were training it on. In this post we tackle this problem by performing Conditional Random Field post-processing stage, which refines our segmentation by taking into account pure RGB features of image and probabilities produced by our network. Overall, we get a refined segmentation. The set-up of this post is very simple on purpose. Similar approach to Segmentation was described in the paper Semantic Image Segmentation with Deep Convolutional Nets and Fully Connected CRFs by Chen et al. Please, take into account that setup in this post was made only to show limitation of FCN-32s model, to perform the training for real-life scenario, we refer readers to the paper Fully convolutional networks for semantic segmentation.

The blog post is created using jupyter notebook. After each chunk of a code you can see the result of its evaluation. You can also get the notebook file from here. The content of the blog post is partially borrowed from slim walkthough notebook.

Setup

To be able to run the code, you will need to have Tensorflow installed. I have used r0.12. You will need to use this fork of tensorflow/models.

I am also using scikit-image library and numpy for this tutorial plus other dependencies. One of the ways to install them is to download Anaconda software package for python.

Follow all the other steps described in the previous posts – it shows how to download the VGG-16 model and perform all other necessary for this tutorial steps.

Upsampling helper functions and Image Loading

In this part, we define helper functions that were used in the previous post. If you recall, we used upsampling to upsample the downsampled predictions that we get from our network. We get downsampled predictions because of max-pooling layers that are used in VGG-16 network.

We also write code for image and respective ground-truth segmentation loading. The code is well-commented, so don’t be afraid to read it.

import numpy as np def get_kernel_size(factor): """ Find the kernel size given the desired factor of upsampling. """ return 2 * factor - factor % 2 def upsample_filt(size): """ Make a 2D bilinear kernel suitable for upsampling of the given (h, w) size. """ factor = (size + 1) // 2 if size % 2 == 1: center = factor - 1 else: center = factor - 0.5 og = np.ogrid[:size, :size] return (1 - abs(og[0] - center) / factor) * \ (1 - abs(og[1] - center) / factor) def bilinear_upsample_weights(factor, number_of_classes): """ Create weights matrix for transposed convolution with bilinear filter initialization. """ filter_size = get_kernel_size(factor) weights = np.zeros((filter_size, filter_size, number_of_classes, number_of_classes), dtype=np.float32) upsample_kernel = upsample_filt(filter_size) for i in xrange(number_of_classes): weights[:, :, i, i] = upsample_kernel return weights 
%matplotlib inline

from __future__ import division import os import sys import tensorflow as tf import skimage.io as io import numpy as np os.environ["CUDA_VISIBLE_DEVICES"] = '1' sys.path.append("/home/dpakhom1/workspace/my_models/slim/") checkpoints_dir = '/home/dpakhom1/checkpoints' image_filename = 'cat.jpg' annotation_filename = 'cat_annotation.png' image_filename_placeholder = tf.placeholder(tf.string) annotation_filename_placeholder = tf.placeholder(tf.string) is_training_placeholder = tf.placeholder(tf.bool) feed_dict_to_use = {image_filename_placeholder: image_filename, annotation_filename_placeholder: annotation_filename, is_training_placeholder: True} image_tensor = tf.read_file(image_filename_placeholder) annotation_tensor = tf.read_file(annotation_filename_placeholder) image_tensor = tf.image.decode_jpeg(image_tensor, channels=3) annotation_tensor = tf.image.decode_png(annotation_tensor, channels=1) # Get ones for each class instead of a number -- we need that # for cross-entropy loss later on. Sometimes the groundtruth # masks have values other than 1 and 0. class_labels_tensor = tf.equal(annotation_tensor, 1) background_labels_tensor = tf.not_equal(annotation_tensor, 1) # Convert the boolean values into floats -- so that # computations in cross-entropy loss is correct bit_mask_class = tf.to_float(class_labels_tensor) bit_mask_background = tf.to_float(background_labels_tensor) combined_mask = tf.concat(concat_dim=2, values=[bit_mask_class, bit_mask_background]) # Lets reshape our input so that it becomes suitable for # tf.softmax_cross_entropy_with_logits with [batch_size, num_classes] flat_labels = tf.reshape(tensor=combined_mask, shape=(-1, 2)) 

Loss function definition and training using Adam Optimization Algorithm.

In this part, we connect everything together: add the upsampling layer to our network, define the loss function that can be differentiated and perform training.

Following the Fully convolutional networks for semantic segmentation paper, we define loss as a pixel-wise cross-entropy. We can do this, because after upsampling we got the predictions of the same size as the input and we can compare the acquired segmentation to the respective ground-truth segmentation:

E=n=1Nk=1Ktnkln(ynk)E=−∑n=1N∑k=1Ktnkln(ynk)

Where NN is a number of pixels, KK - number of classes, tnktnk a variable representing the ground-truth with 1-of-KK coding scheme, ynkynk represent our predictions (softmax output).

For this case we use Adam optimizer because it requires less parameter tuning to get good results.

In this particular case we train and evaluate our results on one image – which is a much simpler case compared to real-world scenario. We do this to show the drawback of the approach – just to show that is has poor localization copabilities. If this holds for this simple case, it will also show similar of worse results on unseen images.

import numpy as np import tensorflow as tf import sys import os from matplotlib import pyplot as plt fig_size = [15, 4] plt.rcParams["figure.figsize"] = fig_size import urllib2 slim = tf.contrib.slim from nets import vgg from preprocessing import vgg_preprocessing # Load the mean pixel values and the function # that performs the subtraction from each pixel from preprocessing.vgg_preprocessing import (_mean_image_subtraction, _R_MEAN, _G_MEAN, _B_MEAN) upsample_factor = 32 number_of_classes = 2 log_folder = '/home/dpakhom1/tf_projects/segmentation/log_folder' vgg_checkpoint_path = os.path.join(checkpoints_dir, 'vgg_16.ckpt') # Convert image to float32 before subtracting the # mean pixel value image_float = tf.to_float(image_tensor, name='ToFloat') # Subtract the mean pixel value from each pixel mean_centered_image = _mean_image_subtraction(image_float, [_R_MEAN, _G_MEAN, _B_MEAN]) processed_images = tf.expand_dims(mean_centered_image, 0) upsample_filter_np = bilinear_upsample_weights(upsample_factor, number_of_classes) upsample_filter_tensor = tf.constant(upsample_filter_np) # Define the model that we want to use -- specify to use only two classes at the last layer with slim.arg_scope(vgg.vgg_arg_scope()): logits, end_points = vgg.vgg_16(processed_images, num_classes=2, is_training=is_training_placeholder, spatial_squeeze=False, fc_conv_padding='SAME') downsampled_logits_shape = tf.shape(logits) # Calculate the ouput size of the upsampled tensor upsampled_logits_shape = tf.pack([ downsampled_logits_shape[0], downsampled_logits_shape[1] * upsample_factor, downsampled_logits_shape[2] * upsample_factor, downsampled_logits_shape[3] ]) # Perform the upsampling upsampled_logits = tf.nn.conv2d_transpose(logits, upsample_filter_tensor, output_shape=upsampled_logits_shape, strides=[1, upsample_factor, upsample_factor, 1]) # Flatten the predictions, so that we can compute cross-entropy for # each pixel and get a sum of cross-entropies. flat_logits = tf.reshape(tensor=upsampled_logits, shape=(-1, number_of_classes)) cross_entropies = tf.nn.softmax_cross_entropy_with_logits(logits=flat_logits, labels=flat_labels) cross_entropy_sum = tf.reduce_sum(cross_entropies) # Tensor to get the final prediction for each pixel -- pay # attention that we don't need softmax in this case because # we only need the final decision. If we also need the respective # probabilities we will have to apply softmax. pred = tf.argmax(upsampled_logits, dimension=3) probabilities = tf.nn.softmax(upsampled_logits) # Here we define an optimizer and put all the variables # that will be created under a namespace of 'adam_vars'. # This is done so that we can easily access them later. # Those variables are used by adam optimizer and are not # related to variables of the vgg model. # We also retrieve gradient Tensors for each of our variables # This way we can later visualize them in tensorboard. # optimizer.compute_gradients and optimizer.apply_gradients # is equivalent to running: # train_step = tf.train.AdamOptimizer(learning_rate=0.0001).minimize(cross_entropy_sum) with tf.variable_scope("adam_vars"): optimizer = tf.train.AdamOptimizer(learning_rate=0.0001) gradients = optimizer.compute_gradients(loss=cross_entropy_sum) for grad_var_pair in gradients: current_variable = grad_var_pair[1] current_gradient = grad_var_pair[0] # Relace some characters from the original variable name # tensorboard doesn't accept ':' symbol gradient_name_to_save = current_variable.name.replace(":", "_") # Let's get histogram of gradients for each layer and # visualize them later in tensorboard tf.summary.histogram(gradient_name_to_save, current_gradient) train_step = optimizer.apply_gradients(grads_and_vars=gradients) # Now we define a function that will load the weights from VGG checkpoint # into our variables when we call it. We exclude the weights from the last layer # which is responsible for class predictions. We do this because # we will have different number of classes to predict and we can't # use the old ones as an initialization. vgg_except_fc8_weights = slim.get_variables_to_restore(exclude=['vgg_16/fc8', 'adam_vars']) # Here we get variables that belong to the last layer of network. # As we saw, the number of classes that VGG was originally trained on # is different from ours -- in our case it is only 2 classes. vgg_fc8_weights = slim.get_variables_to_restore(include=['vgg_16/fc8']) adam_optimizer_variables = slim.get_variables_to_restore(include=['adam_vars']) # Add summary op for the loss -- to be able to see it in # tensorboard. tf.summary.scalar('cross_entropy_loss', cross_entropy_sum) # Put all summary ops into one op. Produces string when # you run it. merged_summary_op = tf.summary.merge_all() # Create the summary writer -- to write all the logs # into a specified file. This file can be later read # by tensorboard. summary_string_writer = tf.summary.FileWriter(log_folder) # Create the log folder if doesn't exist yet if not os.path.exists(log_folder): os.makedirs(log_folder) # Create an OP that performs the initialization of # values of variables to the values from VGG. read_vgg_weights_except_fc8_func = slim.assign_from_checkpoint_fn( vgg_checkpoint_path, vgg_except_fc8_weights) # Initializer for new fc8 weights -- for two classes. vgg_fc8_weights_initializer = tf.variables_initializer(vgg_fc8_weights) # Initializer for adam variables optimization_variables_initializer = tf.variables_initializer(adam_optimizer_variables) with tf.Session() as sess: # Run the initializers. read_vgg_weights_except_fc8_func(sess) sess.run(vgg_fc8_weights_initializer) sess.run(optimization_variables_initializer) train_image, train_annotation = sess.run([image_tensor, annotation_tensor], feed_dict=feed_dict_to_use) f, (ax1, ax2) = plt.subplots(1, 2, sharey=True) ax1.imshow(train_image) ax1.set_title('Input image') probability_graph = ax2.imshow(np.dstack((train_annotation,)*3)*100) ax2.set_title('Input Ground-Truth Annotation') plt.show() # Let's perform 10 interations for i in range(10): loss, summary_string = sess.run([cross_entropy_sum, merged_summary_op], feed_dict=feed_dict_to_use) sess.run(train_step, feed_dict=feed_dict_to_use) pred_np, probabilities_np = sess.run([pred, probabilities], feed_dict=feed_dict_to_use) summary_string_writer.add_summary(summary_string, i) cmap = plt.get_cmap('bwr') f, (ax1, ax2) = plt.subplots(1, 2, sharey=True) ax1.imshow(np.uint8(pred_np.squeeze() != 1), vmax=1.5, vmin=-0.4, cmap=cmap) ax1.set_title('Argmax. Iteration # ' + str(i)) probability_graph = ax2.imshow(probabilities_np.squeeze()[:, :, 0]) ax2.set_title('Probability of the Class. Iteration # ' + str(i)) plt.colorbar(probability_graph) plt.show() print("Current Loss: " + str(loss)) feed_dict_to_use[is_training_placeholder] = False final_predictions, final_probabilities, final_loss = sess.run([pred, probabilities, cross_entropy_sum], feed_dict=feed_dict_to_use) f, (ax1, ax2) = plt.subplots(1, 2, sharey=True) ax1.imshow(np.uint8(final_predictions.squeeze() != 1), vmax=1.5, vmin=-0.4, cmap=cmap) ax1.set_title('Final Argmax') probability_graph = ax2.imshow(final_probabilities.squeeze()[:, :, 0]) ax2.set_title('Final Probability of the Class') plt.colorbar(probability_graph) plt.show() print("Final Loss: " + str(final_loss)) summary_string_writer.close() 

png

png

Current Loss: 201433.0

png

Current Loss: 245565.0

png

Current Loss: 135906.0

png

Current Loss: 183353.0

png

Current Loss: 48563.9

png

Current Loss: 37925.8

png

Current Loss: 33199.1

png

Current Loss: 26540.3

png

Current Loss: 23658.0

png

Current Loss: 29404.9

png

Final Loss: 18177.5

As you can see, the results are very coarse – and these are results that we get by running our network on the same image that we were training on. This is very common problem in segmentation – the results are usually coarse. There are different approaches that can help to solve this problem – one of them is to use skip-connections. The main idea is that predictions are made by fusing predictions from different layers of the network. Because in earlier layers of a network the downsampling factor is smaller, it is possible to get a better localization by making predictions based on those layers. This approach is described in the Fully convolutional networks for semantic segmentation by Long et al. This approach gave rise to FCN-16s and FCN-8s architectures.

Another approach is based on using atrous convolutions and fully connected conditional random fields. The approach is described in the Semantic Image Segmentation with Deep Convolutional Nets and Fully Connected CRFs by Chen et al. In this post we will only use CRF post-processing stage to show how it can improve the results.

It is also worth mentioning that the current model was trained with dropout applied to fully connected layers (fully connected layers that we casted to convolutional ones). This approach is described in Dropout: a simple way to prevent neural networks from overfitting by Srivastava et al. Dropout is a regularization technique for training networks. It has a very good theoretical description while the implementation is very simple: we just randomly choose a certain number of neurons during each training step, perform inference and backpropagation only through them. While from the theoretical side, it can be seen as training a collection of thinned networks with weight sharing, where each network gets trained very rarely. During the test time, we average predictions from all of these networks. In the paper, the authors showed that dropout in case of linear regression is equivalent, in expection, to ridge regression. In our specific case we use dropout only for fully-connected layers (fully connected layers that we casted to convolutional ones). This explains why the loss for the final model is almost twice less then during the last iteration – because for the final inference we used averaging.

The code that is provided above is made to run on one image, but you can easily run it on your dataset. The only change that is needed is to provide different image on each iteration step. This type of training will be exactly the same as in the Fully convolutional networks for semantic segmentation paper where the authors have used batch size of one.

Overall, we can see that our segmentation is still quite coarse and we need to perform some additional step. In the next section we will use CRF post-processing step to make segmentation finer.

Conditional Random Field post-processing

Conditional Random Field is a specific type of graphical model. In our case it helps to estimate the posterior distribution given predictions from our network and raw RGBfeatures that are represented by our image. It does that by minimizing the energy function which are defined by the user. In our case the effect is very similar to bilateral filter which takes into account the spatial closeness of pixels and their similarity in RGB feature space (intensity space).

On a very simple level, it uses RGB features to make prediction more localized – for example the border is usually represented as a big intensity change – this acts as a strong factor that objects that lie on different side of this border belong to different classes. It also penalizes small segmentation regions – for example it is unlikely that a small region of 20 or 50 pixels is a correct segmentation. Objects are usually represented by big spatially adjacent regions.

Below you can see how this post-processing stage affects our results. We are using fully connected conditional random fields which is described in Efficient inference in fully connected crfs with gaussian edge potentials paper.

For this part I used a little bit older version of the fully connected CRF library which you can find here.

import sys

path = "/home/dpakhom1/dense_crf_python/" sys.path.append(path) import pydensecrf.densecrf as dcrf from pydensecrf.utils import compute_unary, create_pairwise_bilateral, \ create_pairwise_gaussian, softmax_to_unary import skimage.io as io image = train_image softmax = final_probabilities.squeeze() softmax = processed_probabilities.transpose((2, 0, 1)) # The input should be the negative of the logarithm of probability values # Look up the definition of the softmax_to_unary for more information unary = softmax_to_unary(processed_probabilities) # The inputs should be C-continious -- we are using Cython wrapper unary = np.ascontiguousarray(unary) d = dcrf.DenseCRF(image.shape[0] * image.shape[1], 2) d.setUnaryEnergy(unary) # This potential penalizes small pieces of segmentation that are # spatially isolated -- enforces more spatially consistent segmentations feats = create_pairwise_gaussian(sdims=(10, 10), shape=image.shape[:2]) d.addPairwiseEnergy(feats, compat=3, kernel=dcrf.DIAG_KERNEL, normalization=dcrf.NORMALIZE_SYMMETRIC) # This creates the color-dependent features -- # because the segmentation that we get from CNN are too coarse # and we can use local color features to refine them feats = create_pairwise_bilateral(sdims=(50, 50), schan=(20, 20, 20), img=image, chdim=2) d.addPairwiseEnergy(feats, compat=10, kernel=dcrf.DIAG_KERNEL, normalization=dcrf.NORMALIZE_SYMMETRIC) Q = d.inference(5) res = np.argmax(Q, axis=0).reshape((image.shape[0], image.shape[1])) cmap = plt.get_cmap('bwr') f, (ax1, ax2) = plt.subplots(1, 2, sharey=True) ax1.imshow(res, vmax=1.5, vmin=-0.4, cmap=cmap) ax1.set_title('Segmentation with CRF post-processing') probability_graph = ax2.imshow(np.dstack((train_annotation,)*3)*100) ax2.set_title('Ground-Truth Annotation') plt.show() 

png

Conclusion and Discussion

In this tutorial we saw one drawback of Convolutional Neural Networks when applied to the problem of segmentation – coarse segmentation results. We saw that is happens due to the usage of max-pooling layers in the architecture of the VGG-16 network.

We performed training in a simplified case, by defining a cross-etropy loss pixel-wise and using back-propagation to perform the weights update.

We approached the problem of coarse segmentation results by using Conditional Random Fields (CRFs) and achieved better results.

 
FEW MORE LINKS
FOLLOW ME

Powered by Jekyll

相关文章
|
5月前
|
缓存 TensorFlow 算法框架/工具
TensorFlow学习笔记(一): tf.Variable() 和tf.get_variable()详解
这篇文章详细介绍了TensorFlow中`tf.Variable()`和`tf.get_variable()`的使用方法、参数含义以及它们之间的区别。
230 0
|
2月前
|
算法 数据挖掘
文献解读-Prediction of axillary lymph node metastasis in triple-negative breast cancer by multi-omics analysis and an integrated model
研究旨在为三阴性乳腺癌患者提供更准确的腋窝淋巴结转移风险评估工具。研究者综合分析了临床病理信息、基因组和转录组数据,构建了一个多组学预测模型。
43 4
|
7月前
|
机器学习/深度学习 编解码 自然语言处理
【文献学习】An Image is Worth 16x16 Words: Transformers for Image Recognition at Scale
本文介绍了如何使用纯Transformer模型进行图像识别,并讨论了模型的结构、训练策略及其在多个图像识别基准上的性能。
258 3
|
7月前
|
TensorFlow 算法框架/工具
【Tensorflow+Keras】tf.keras.backend.image_data_format()的解析与举例使用
介绍了TensorFlow和Keras中tf.keras.backend.image_data_format()函数的用法。
74 5
|
7月前
|
TensorFlow API 算法框架/工具
【Tensorflow】解决Inputs to eager execution function cannot be Keras symbolic tensors, but found [<tf.Te
文章讨论了在使用Tensorflow 2.3时遇到的一个错误:"Inputs to eager execution function cannot be Keras symbolic tensors...",这个问题通常与Tensorflow的eager execution(急切执行)模式有关,提供了三种解决这个问题的方法。
73 1
|
7月前
|
TensorFlow API 算法框架/工具
【Tensorflow+keras】解决使用model.load_weights时报错 ‘str‘ object has no attribute ‘decode‘
python 3.6,Tensorflow 2.0,在使用Tensorflow 的keras API,加载权重模型时,报错’str’ object has no attribute ‘decode’
109 0
|
10月前
|
算法 BI 计算机视觉
[Initial Image Segmentation Generator]论文实现:Efficient Graph-Based Image Segmentation
[Initial Image Segmentation Generator]论文实现:Efficient Graph-Based Image Segmentation
95 1
|
9月前
|
人工智能 自然语言处理 PyTorch
CLIP(Contrastive Language-Image Pre-training)
CLIP(Contrastive Language-Image Pre-training)
439 0
|
API 数据格式
TensorFlow2._:model.summary() Output Shape为multiple解决方法
TensorFlow2._:model.summary() Output Shape为multiple解决方法
313 0
TensorFlow2._:model.summary() Output Shape为multiple解决方法
|
运维 算法 数据挖掘
Clustering-Base and Classification -Base Approaches|学习笔记
快速学习 Clustering-Base and Classification -Base Approaches
Clustering-Base and Classification -Base Approaches|学习笔记