0213综合练习1

简介:
0213 综合练习:
互连测试:
R1
     192.168.30.0/30 is subnetted, 1 subnets
C       192.168.30.0 is directly connected, FastEthernet0/0
     192.168.10.0/27 is subnetted, 1 subnets
O       192.168.10.0 [110/2] via 192.168.30.2, 00:28:57, FastEthernet0/0
     192.168.40.0/24 is variably subnetted, 2 subnets, 2 masks
C       192.168.40.0/30 is directly connected, Serial2/0
C       192.168.40.1/32 is directly connected, Serial2/0
     172.16.0.0/24 is subnetted, 2 subnets
O E2    172.16.20.0 [110/20] via 192.168.40.1, 00:26:37, Serial2/0
O E2    172.16.10.0 [110/20] via 192.168.40.1, 00:26:37, Serial2/0
     192.168.20.0/27 is subnetted, 1 subnets
O       192.168.20.0 [110/2] via 192.168.30.2, 00:28:57, FastEthernet0/0
     192.168.50.0/30 is subnetted, 1 subnets
C       192.168.50.0 is directly connected, FastEthernet1/0
O*E2 0.0.0.0/0 [110/1] via 192.168.50.1, 00:29:16, FastEthernet1/0
r1#
R2
    192.168.30.0/30 is subnetted, 1 subnets
O       192.168.30.0 [110/65] via 192.168.40.2, 00:29:00, Serial2/0
     192.168.10.0/27 is subnetted, 1 subnets
O       192.168.10.0 [110/66] via 192.168.40.2, 00:29:00, Serial2/0
     192.168.40.0/24 is variably subnetted, 2 subnets, 2 masks
C       192.168.40.0/30 is directly connected, Serial2/0
C       192.168.40.2/32 is directly connected, Serial2/0
     172.16.0.0/24 is subnetted, 2 subnets
S       172.16.20.0 is directly connected, Tunnel0
S       172.16.10.0 is directly connected, Tunnel0
     202.102.1.0/28 is subnetted, 1 subnets
R       202.102.1.0 [120/1] via 202.101.1.2, 00:00:01, FastEthernet0/0
     202.103.1.0/28 is subnetted, 1 subnets
R       202.103.1.0 [120/1] via 202.101.1.2, 00:00:13, FastEthernet0/0
     202.100.1.0/28 is subnetted, 1 subnets
R       202.100.1.0 [120/1] via 202.101.1.2, 00:00:13, FastEthernet0/0
     202.101.1.0/28 is subnetted, 1 subnets
C       202.101.1.0 is directly connected, FastEthernet0/0
     192.168.20.0/27 is subnetted, 1 subnets
O       192.168.20.0 [110/66] via 192.168.40.2, 00:29:40, Serial2/0
     10.0.0.0/30 is subnetted, 1 subnets
C       10.1.1.0 is directly connected, Tunnel0
     192.168.50.0/30 is subnetted, 1 subnets
O       192.168.50.0 [110/65] via 192.168.40.2, 00:29:40, Serial2/0
r2#
r2# SH IP INT B
Interface                  IP-Address      OK? Method Status                Protocol
FastEthernet0/0            202.101.1.1     YES NVRAM  up                    up     
FastEthernet1/0            unassigned      YES NVRAM  administratively down down   
Serial2/0                  192.168.40.1    YES manual up                    up     
Serial2/1                  unassigned      YES NVRAM  administratively down down   
Serial2/2                  unassigned      YES NVRAM  administratively down down   
Serial2/3                  unassigned      YES NVRAM  administratively down down   
Tunnel0                    10.1.1.1        YES NVRAM  up                    up     
r2#SH CRY IS SA
dst             src             state          conn-id slot
202.102.1.1     202.101.1.1     QM_IDLE              1    0
r2#
R3
S    192.168.10.0/24 is directly connected, Tunnel0
     172.16.0.0/16 is variably subnetted, 3 subnets, 2 masks
C       172.16.30.0/30 is directly connected, FastEthernet1/0
S       172.16.20.0/24 [1/0] via 172.16.30.2
S       172.16.10.0/24 [1/0] via 172.16.30.2
     202.102.1.0/28 is subnetted, 1 subnets
C       202.102.1.0 is directly connected, FastEthernet0/0
     202.103.1.0/28 is subnetted, 1 subnets
R       202.103.1.0 [120/1] via 202.102.1.2, 00:00:06, FastEthernet0/0
     202.100.1.0/28 is subnetted, 1 subnets
R       202.100.1.0 [120/1] via 202.102.1.2, 00:00:06, FastEthernet0/0
     202.101.1.0/28 is subnetted, 1 subnets
R       202.101.1.0 [120/1] via 202.102.1.2, 00:00:06, FastEthernet0/0
S    192.168.20.0/24 is directly connected, Tunnel0
     10.0.0.0/30 is subnetted, 1 subnets
C       10.1.1.0 is directly connected, Tunnel0
r3#
r3#sh ip int b
Interface                  IP-Address      OK? Method Status                Protocol
FastEthernet0/0            202.102.1.1     YES NVRAM  up                    up     
FastEthernet1/0            172.16.30.1     YES NVRAM  up                    up     
Virtual-Access1            unassigned      YES unset  down                  down   
Virtual-Template1          172.16.30.1     YES TFTP   down                  down   
Virtual-Access2            unassigned      YES unset  up                    up     
Virtual-Access2.1          172.16.30.1     YES TFTP   up                    up     
Tunnel0                    10.1.1.2        YES NVRAM  up                    up     
r3#sh cry is sa
dst             src             state          conn-id slot
202.102.1.1     202.101.1.1     QM_IDLE              4    0
r3#sh vp
%No active L2F tunnels
L2TP Tunnel and Session Information Total tunnels 1 sessions 1
LocID RemID Remote Name   State  Remote Address  Port  Sessions L2TP Class/
                                                                VPDN Group
52463 4     lenovo-PC     est    202.100.1.1     1701  1        l2tp          
LocID      RemID      TunID      Username, Intf/      State  Last Chg Uniq ID  
                                 Vcid, Circuit                                 
5          1          52463      l2tpuser, Vi2.1      est    00:00:20 4     
%No active PPTP tunnels
r3#
R4
192.168.30.0/30 is subnetted, 1 subnets
O       192.168.30.0 [110/2] via 192.168.50.2, 00:30:21, FastEthernet1/0
     192.168.10.0/27 is subnetted, 1 subnets
O       192.168.10.0 [110/3] via 192.168.50.2, 00:30:21, FastEthernet1/0
     192.168.40.0/30 is subnetted, 1 subnets
O       192.168.40.0 [110/67] via 192.168.50.2, 00:30:21, FastEthernet1/0
     172.16.0.0/24 is subnetted, 2 subnets
O E2    172.16.20.0 [110/20] via 192.168.50.2, 00:28:01, FastEthernet1/0
O E2    172.16.10.0 [110/20] via 192.168.50.2, 00:28:01, FastEthernet1/0
     202.102.1.0/28 is subnetted, 1 subnets
R       202.102.1.0 [120/1] via 202.100.1.2, 00:00:07, FastEthernet0/0
     202.103.1.0/28 is subnetted, 1 subnets
R       202.103.1.0 [120/1] via 202.100.1.2, 00:00:07, FastEthernet0/0
     202.100.1.0/28 is subnetted, 1 subnets
C       202.100.1.0 is directly connected, FastEthernet0/0
     202.101.1.0/28 is subnetted, 1 subnets
R       202.101.1.0 [120/1] via 202.100.1.2, 00:00:07, FastEthernet0/0
     192.168.20.0/27 is subnetted, 1 subnets
O       192.168.20.0 [110/3] via 192.168.50.2, 00:30:21, FastEthernet1/0
     192.168.50.0/30 is subnetted, 1 subnets
C       192.168.50.0 is directly connected, FastEthernet1/0
r4#
R5
     202.102.1.0/28 is subnetted, 1 subnets
C       202.102.1.0 is directly connected, Vlan30
     202.103.1.0/28 is subnetted, 1 subnets
C       202.103.1.0 is directly connected, Vlan40
     202.100.1.0/28 is subnetted, 1 subnets
C       202.100.1.0 is directly connected, Vlan20
     202.101.1.0/28 is subnetted, 1 subnets
C       202.101.1.0 is directly connected, Vlan10
r5#
R6
    172.16.0.0/24 is subnetted, 3 subnets
C       172.16.30.0 is directly connected, Vlan30
C       172.16.20.0 is directly connected, Vlan20
C       172.16.10.0 is directly connected, Vlan10
S*   0.0.0.0/0 [1/0] via 172.16.30.1
r6#
R8
 
     192.168.30.0/30 is subnetted, 1 subnets
C       192.168.30.0 is directly connected, Vlan30
     192.168.10.0/27 is subnetted, 1 subnets
C       192.168.10.0 is directly connected, Vlan10
     192.168.40.0/30 is subnetted, 1 subnets
O       192.168.40.0 [110/67] via 192.168.30.1, 00:29:08, Vlan30
     172.16.0.0/24 is subnetted, 2 subnets
O E2    172.16.20.0 [110/20] via 192.168.30.1, 00:26:54, Vlan30
O E2    172.16.10.0 [110/20] via 192.168.30.1, 00:26:54, Vlan30
     192.168.20.0/27 is subnetted, 1 subnets
C       192.168.20.0 is directly connected, Vlan20
     192.168.50.0/30 is subnetted, 1 subnets
O       192.168.50.0 [110/2] via 192.168.30.1, 00:29:08, Vlan30
O*E2 0.0.0.0/0 [110/1] via 192.168.30.1, 00:30:57, Vlan30
r8#
系统测试:
网卡配置:
C1[202.103.1.5:WIN7]---> 本地连接
C2[192.168.10.3 :域服务 /DNS 服务 / 证书服务 ;192.168.10.4: 额外 DC/ 文件服务 ] --->virutal host
C3 [192.168.20.4:FTP 服务 ]--->VM1
C4[172.16.10.4 :万维网服务 ]---> 本地连接 2
C5--->VPC1
C1
C2
dc:192.168.10.3
bdc:192.168.10.4
C3
C4
C5

      本文转自810105851 51CTO博客,原文链接:http://blog.51cto.com/4708948/1133754 ,如需转载请自行联系原作者









相关文章
|
6月前
|
算法 测试技术 编译器
掌握CTest:CTest综合指南
掌握CTest:CTest综合指南
532 1
|
6月前
|
供应链
代采系统如何利用大数据分析优化采购决策?
代采系统可以利用大数据分析来优化采购决策
|
22天前
|
供应链 监控 搜索推荐
数据驱动方式如何帮助企业提高决策的准确性和效率?
【10月更文挑战第13天】数据驱动方式通过提供全面准确的信息、及时发现问题和机会、提高决策效率、实现精细化决策、降低决策风险、促进协同沟通以及增强适应性等多方面的作用,显著提高了企业决策的准确性和效率。在当今数字化时代,企业应积极拥抱数据驱动的理念和方法,充分利用数据的价值,为企业的发展和成功奠定坚实基础。你所在的企业是如何运用数据驱动方式来提升决策水平的呢?分享一下你们的经验和做法吧。
21 0
|
4月前
|
机器学习/深度学习 监控 数据挖掘
系统工程是一种跨学科的方法,用于理解和优化复杂系统的性能。在业务流程优化中,系统工程的方法可以帮助我们分析、设计、实施和监控业务流程,以实现效率、质量和成本等方面的改进。
系统工程是一种跨学科的方法,用于理解和优化复杂系统的性能。在业务流程优化中,系统工程的方法可以帮助我们分析、设计、实施和监控业务流程,以实现效率、质量和成本等方面的改进。
|
4月前
|
传感器 数据采集 存储
在环境治理领域,污染治理系统工程旨在通过系统的方法来解决环境污染问题。这通常包括污染源的识别、污染物的监测、治理技术的选择、治理效果的评估等多个环节。
在环境治理领域,污染治理系统工程旨在通过系统的方法来解决环境污染问题。这通常包括污染源的识别、污染物的监测、治理技术的选择、治理效果的评估等多个环节。
|
移动开发 Python
综合评价法之秩和比法RSR
介绍秩和比法的应用,及其代码实现
1296 0
综合评价法之秩和比法RSR
08.综合实战
08.综合实战
42 0
舆情预测工作解决方案
舆情预测,不仅涉及到舆情的评估,还包括事件的发展趋势分析,其重要性不言而喻,那么具体应该怎么做呢?
舆情预测工作解决方案
|
前端开发 JavaScript Java
下一篇
无影云桌面