# curl -s https://raw.githubusercontent.com/oscm/shell/master/web/nginx/stable/nginx.sh | bash
$ sudo apt-get install nginx
sudo /etc/init.d/nginx start
http://nginx.org/packages/centos/$releasever/$basearch/
$releasever 是版本号
$basearch 处理器架构
http://nginx.org/packages/centos/6/x86_64/
cat > /etc/yum.repos.d/nginx.repo <<EOF [nginx] name=nginx repo baseurl=http://nginx.org/packages/centos/6/x86_64/ gpgcheck=0 enabled=1 EOF
i386
cat > /etc/yum.repos.d/nginx.repo <<EOF [nginx] name=nginx repo baseurl=http://nginx.org/packages/centos/5/i386/ gpgcheck=0 enabled=1 EOF
yum search nginx ============================================= Matched: nginx ============================================= nginx.x86_64 : high performance web server yum install -y nginx chkconfig nginx on service nginx start
yum -y install spawn-fcgi
/etc/sysconfig/spawn-fcgi
移除SOCKET与OPTIONS注释, apache改为nginx
# cat /etc/sysconfig/spawn-fcgi # You must set some working options before the "spawn-fcgi" service will work. # If SOCKET points to a file, then this file is cleaned up by the init script. # # See spawn-fcgi(1) for all possible options. # # Example : SOCKET=/var/run/php-fcgi.sock OPTIONS="-u apache -g apache -s $SOCKET -S -M 0600 -C 32 -F 1 -P /var/run/spawn-fcgi.pid -- /usr/bin/php-cgi"
chkconfig spawn-fcgi on
starting spawn-fcgi
/etc/init.d/spawn-fcgi start
check port
# netstat -nl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 25282 /var/run/php-fcgi.sock unix 2 [ ACC ] STREAM LISTENING 8227 @/com/ubuntu/upstart
Unix domain socket
location ~ \.php$ { fastcgi_pass unix:/var/run/php-fcgi.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/nginx-default$fastcgi_script_name; include fastcgi_params; }TCP/IP
/usr/bin/spawn-fcgi -a 127.0.0.1 -p 9000 -u nginx -g nginx -d /www -C 32 -F 1 -P /var/run/spawn-fcgi.pid -f /usr/bin/php-cgi
location ~ \.php$ {
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /var/www/nginx-default$fastcgi_script_name;
include fastcgi_params;
}
# netstat -tulpn | grep :9000 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 26877/php-cgi
chkconfig nginx on
check config
nginx -t
rpm -Uvh http://download.fedora.redhat.com/pub/epel/6/x86_64/epel-release-6-5.noarch.rpm yum install nginx -y
chkconfig nginx on
check config
nginx -t
yum -y install mysql mysql-server yum -y install php php-cgi php-mysql php-mbstring php-gd php-fastcgi yum -y install perl-DBI perl-DBD-MySQL
其他 php-fpm YUM源
rpm --import http://rpms.famillecollet.com/RPM-GPG-KEY-remi rpm -ivh http://rpms.famillecollet.com/enterprise/remi-release-6.rpm
# rpm -Uvh http://centos.alt.ru/repository/centos/6/i386/centalt-release-6-1.noarch.rpm # yum update
cd /usr/local/src/ wget http://www.nginx.org/download/nginx-1.0.6.tar.gz ./configure --prefix=/usr/local/server/nginx \ --with-openssl=/usr/include \ --with-pcre=/usr/include/pcre/ \ --with-http_stub_status_module \ --without-http_memcached_module \ --without-http_fastcgi_module \ --without-http_rewrite_module \ --without-http_map_module \ --without-http_geo_module \ --without-http_autoindex_module
rpm 所使用的编译参数
nginx -V nginx: nginx version: nginx/1.0.6 nginx: built by gcc 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) nginx: TLS SNI support enabled nginx: configure arguments: --prefix=/etc/nginx/ --sbin-path=/usr/sbin/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --pid-path=/var/run/nginx.pid --lock-path=/var/run/nginx.lock --http-client-body-temp-path=/var/cache/nginx/client_temp --http-proxy-temp-path=/var/cache/nginx/proxy_temp --http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp --http-uwsgi-temp-path=/var/cache/nginx/uwcgi_temp --http-scgi-temp-path=/var/cache/nginx/scgi_temp --user=nginx --group=nginx --with-http_ssl_module --with-http_realip_module --with-http_addition_module --with-http_sub_module --with-http_dav_module --with-http_flv_module --with-http_gzip_static_module --with-http_random_index_module --with-http_secure_link_module --with-http_stub_status_module --with-mail --with-mail_ssl_module --with-file-aio --with-ipv6
# nginx -V nginx version: nginx/1.2.3 built by gcc 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) TLS SNI support enabled configure arguments: --prefix=/etc/nginx/ --sbin-path=/usr/sbin/nginx --conf-path=/etc/nginx/nginx.conf --error-log-path=/var/log/nginx/error.log --http-log-path=/var/log/nginx/access.log --pid-path=/var/run/nginx.pid --lock-path=/var/run/nginx.lock --http-client-body-temp-path=/var/cache/nginx/client_temp --http-proxy-temp-path=/var/cache/nginx/proxy_temp --http-fastcgi-temp-path=/var/cache/nginx/fastcgi_temp --http-uwsgi-temp-path=/var/cache/nginx/uwsgi_temp --http-scgi-temp-path=/var/cache/nginx/scgi_temp --user=nginx --group=nginx --with-http_ssl_module --with-http_realip_module --with-http_addition_module --with-http_sub_module --with-http_dav_module --with-http_flv_module --with-http_mp4_module --with-http_gzip_static_module --with-http_random_index_module --with-http_secure_link_module --with-http_stub_status_module --with-mail --with-mail_ssl_module --with-file-aio --with-ipv6 --with-cc-opt='-O2 -g'
#!/bin/bash
rpm -ivh http://nginx.org/packages/centos/7/noarch/RPMS/nginx-release-centos-7-0.el7.ngx.noarch.rpm
yum install -y nginx
cp /etc/nginx/nginx.conf{,.original}
vim /etc/nginx/nginx.conf <<VIM > /dev/null 2>&1
:%s/worker_processes 1;/worker_processes 8;/
:%s/worker_connections 1024;/worker_connections 4096;/
:%s/#gzip/server_tokens off;\r gzip/
:%s/#gzip/gzip/
:wq
VIM
sed -i '4iworker_rlimit_nofile 65530;' /etc/nginx/nginx.conf
systemctl enable nginx
systemctl start nginx
测试配置文件是否正确
# nginx -t nginx: the configuration file /etc/nginx/nginx.conf syntax is ok nginx: configuration file /etc/nginx/nginx.conf test is successful
安装
neo@MacBook-Pro ~ % brew install nginx
启动
neo@MacBook-Pro ~ % brew services start nginx ==> Successfully started `nginx` (label: homebrew.mxcl.nginx)
重启
neo@MacBook-Pro /usr/local/etc/nginx % brew services restart nginx Stopping `nginx`... (might take a while) ==> Successfully stopped `nginx` (label: homebrew.mxcl.nginx) ==> Successfully started `nginx` (label: homebrew.mxcl.nginx)
配置文件在 /usr/local/etc/nginx 下，默认使用 8080端口
nginx.conf 文件如下
#user nobody;
worker_processes 1;
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
#pid logs/nginx.pid;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
#log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for"';
#access_log logs/access.log main;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
server {
listen 8080;
server_name localhost;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
root html;
index index.html index.htm;
}
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ \.php$ {
# proxy_pass http://127.0.0.1;
#}
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
#location ~ \.php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
# include fastcgi_params;
#}
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /\.ht {
# deny all;
#}
}
# another virtual host using mix of IP-, name-, and port-based configuration
#
#server {
# listen 8000;
# listen somename:8080;
# server_name somename alias another.alias;
# location / {
# root html;
# index index.html index.htm;
# }
#}
# HTTPS server
#
#server {
# listen 443 ssl;
# server_name localhost;
# ssl_certificate cert.pem;
# ssl_certificate_key cert.key;
# ssl_session_cache shared:SSL:1m;
# ssl_session_timeout 5m;
# ssl_ciphers HIGH:!aNULL:!MD5;
# ssl_prefer_server_ciphers on;
# location / {
# root html;
# index index.html index.htm;
# }
#}
include servers/*;
}
mac下自带的软件
neo@MacBook-Pro ~ % php -v PHP 5.6.30 (cli) (built: Feb 7 2017 16:18:37) Copyright (c) 1997-2016 The PHP Group Zend Engine v2.6.0, Copyright (c) 1998-2016 Zend Technologies
启动php-fpm方法如下
cd /private/etc sudo cp php-fpm.conf.default php-fpm.conf
修改error_log项, 改为error_log = /usr/local/var/log/php-fpm.log
启动 php-fpm
php-fpm
一些特别的情况下需要切割日志，请参考下面的例子
# cat /srv/bin/rotatelog.sh
#!/bin/bash
# run this script at 0:00
#Nginx Log Path
log_dir="/var/log/nginx"
date_dir=`date +%Y/%m/%d/%H`
mkdir -p ${log_dir}/${date_dir} > /dev/null 2>&1
mv ${log_dir}/access.log ${log_dir}/${date_dir}/access.log
mv ${log_dir}/error.log ${log_dir}/${date_dir}/error.log
kill -USR1 `cat /var/run/nginx.pid`
gzip ${log_dir}/${date_dir}/access.log &
gzip ${log_dir}/${date_dir}/error.log &
如果是非源码安装，一般情况nginx都会自带日志切割处理配置文件。
# cat /etc/logrotate.d/nginx
/var/log/nginx/*.log {
daily
missingok
rotate 52
compress
delaycompress
notifempty
create 640 root adm
sharedscripts
postrotate
[ -f /var/run/nginx.pid ] && kill -USR1 `cat /var/run/nginx.pid`
endscript
}
原文出处：Netkiller 系列 手札
本文作者：陈景峯
转载请与作者联系，同时请务必标明文章原始出处和作者信息及本声明。
