开发者社区> 珠海_jadeluo> 正文
阿里云
为了无法计算的价值
打开APP
阿里云APP内打开

memcache tomcat 集群

简介:
+关注继续查看
Search    Search within:       All wiki pages    Featured pages    Current pages         Deprecated pages      for  
 
SetupAndConfiguration  
This page shows what's necessary to get the memcached-session-manager up and running. 
FeaturedPhase-Deploy
Updated Jun 15, 2014 by martin.grotzke

 

 

Introduction

For the most simple integration you just need to have a tomcat (6, 7 or 8) and a memcached installed (or s.th. supporting the memcached protocol). In your production environment you probably will have several tomcats and you should also have several memcached nodes available, on different pieces of hardware. You can use sticky sessions or non-sticky sessions, memcached-session-manager (msm) supports both operation modes.

The following description shows an example for a setup with sticky sessions, with two instances of tomcat and two instances of memcached installed.

Tomcat-1 (t1) will primarily store it's sessions in memcached-2 (m2) which is running on another machine (m2 is a regular node for t1). Only if m2 is not available, t1 will store it's sessions in memcached-1 (m1, m1 is the failoverNode for t1). With this configuration, sessions won't be lost when machine 1 (serving t1 and m1) crashes. The following really nice ASCII art shows this setup.

<t1>   <t2>
  . \ / .
  .  X  .
  . / \ .
<m1>   <m2>

So what needs to be done for this?

Decide which serialization strategy to use

There are several session serialization strategies available, as they are described on SerializationStrategies. The default strategy uses Javaserialization and is already provided by the memcached-session-manager jar. Other strategies are provided by separate jars, in the section below you'll see which jars are required for which strategy.

Configure tomcat

The configuration of tomcat requires two things: you need to drop some jars in your $CATALINA_HOME/lib/ and WEB-INF/lib/ directories and you have to configure the memcached session manager in the related <Context> element (e.g. in META-INF/context.xml inside the application files).

Add memcached-session-manager jars to tomcat

Independent of the chosen serialization strategy you always need the memcached-session-manager-${version}.jar and either memcached-session-manager-tc6-${version}.jar for tomcat6, memcached-session-manager-tc7-${version}.jar for tomcat7 (attention: tomcat 7.0.23+) ormemcached-session-manager-tc8-${version}.jar for tomcat8.

If you're using memcached, you also need the spymemcached-2.11.1.jar.

If you're using couchbase, you need additionally these jars: couchbase-client-1.4.0.jar jettison-1.3.jarcommons-codec-1.5.jarhttpcore-4.3.jar,httpcore-nio-4.3.jarnetty-3.5.5.Final.jar.

Please download the appropriate jars and put them in $CATALINA_HOME/lib/.

Add custom serializers to your webapp (optional)

If you want to use java's built in serialization nothing more has to be done. If you want to use a custom serialization strategy (e.g. because ofbetter performance) this has to be deployed with your webapp so that they're available in WEB-INF/lib/.

As msm is available in maven central (under groupId de.javakaffee.msm) you can just pull it in using the dependency management of your build system. With maven you can use this dependency definition for the kryo-serializer:

<dependency>
    <groupId>de.javakaffee.msm</groupId>
    <artifactId>msm-kryo-serializer</artifactId>
    <version>1.8.0</version>
    <scope>runtime</scope>
</dependency>

For javolution the artifactId is msm-javolution-serializer, for xstream msm-xstream-serializer and for flexjson it's msm-flexjson-serializer.

If you're not using a dependency management based on maven repositories these are the jars you need for the different serializers:

 

Configure memcached-session-manager as <Context> Manager

Update the <Context> element (in META-INF/context.xml or what else you choose for context definition, please check the related tomcat documentation for this) so that it contains the Manager configuration for the memcached-session-manager, like in the examples below.

The following examples show configurations for sticky sessions and non-sticky sessions with memcached servers and for non-sticky sessions with membase. The examples with memcached servers assume that there are two memcacheds running, one on host1 and another one on host2. All sample configurations assume that you want to use kryo based serialization.

Example for sticky sessions + kryo

The following example shows the configuration of the first tomcat, assuming that it runs on host1, together with memcached "n1". The attributefailoverNodes="n1" tells msm to store sessions preferably in memcached "n2" and only store sessions in "n1" (running on the same host/machine) if no other memcached node (here only n2) is available (even if host1 goes down completely, the session is still available in memcached "n2" and could be served by the tomcat on host2). For the second tomcat (on host2) you just need to change the failover node to "n2", so that it prefers the memcached "n1". Everything else should be left unchanged.

<Context>
  ...
  <ManagerclassName="de.javakaffee.web.msm.MemcachedBackupSessionManager"
    memcachedNodes="n1:host1.yourdomain.com:11211,n2:host2.yourdomain.com:11211"
    failoverNodes="n1"
    requestUriIgnorePattern=".*\.(ico|png|gif|jpg|css|js)$"
    transcoderFactoryClass="de.javakaffee.web.msm.serializer.kryo.KryoTranscoderFactory"
    />
</Context>

Example for non-sticky sessions + kryo

The following example shows a configuration for non-sticky sessions. In this case there's no need for failoverNodes, as sessions are served by all tomcats round-robin and they're not bound to a single tomcat. For non-sticky sessions the configuration (for both/all tomcats) would look like this:

<Context>
  ...
  <ManagerclassName="de.javakaffee.web.msm.MemcachedBackupSessionManager"
    memcachedNodes="n1:host1.yourdomain.com:11211,n2:host2.yourdomain.com:11211"
    sticky="false"
    sessionBackupAsync="false"
    lockingMode="uriPattern:/path1|/path2"
    requestUriIgnorePattern=".*\.(ico|png|gif|jpg|css|js)$"
    transcoderFactoryClass="de.javakaffee.web.msm.serializer.kryo.KryoTranscoderFactory"
    />
</Context>

Example for non-sticky sessions with couchbase + kryo

To connect to a membase bucket "bucket1" the configuration would look like this:

<Context>
  ...
  <ManagerclassName="de.javakaffee.web.msm.MemcachedBackupSessionManager"
    memcachedNodes="http://host1.yourdomain.com:8091/pools"
    username="bucket1"
    password="topsecret"
    memcachedProtocol="binary"
    sticky="false"
    sessionBackupAsync="false"
    requestUriIgnorePattern=".*\.(ico|png|gif|jpg|css|js)$"
    transcoderFactoryClass="de.javakaffee.web.msm.serializer.kryo.KryoTranscoderFactory"
    />
</Context>

Example for multiple contexts sharing the same session id

If you are running multiple webapps/contexts sharing the same session id (e.g. by having set sessionCookiePath="/" - oremptySessionPath="true" in tomcat 6) you must tell memcached session manager to add a prefix to the session id when storing a session in memcached. For this you can use the storageKeyPrefix attribute as shown by this example (see also the more detailed attribute description below):

<ContextsessionCookiePath="/">
  ...
  <ManagerclassName="de.javakaffee.web.msm.MemcachedBackupSessionManager"
    memcachedNodes="n1:host1.yourdomain.com:11211,n2:host2.yourdomain.com:11211"
    failoverNodes="n1"
    storageKeyPrefix="context"
    requestUriIgnorePattern=".*\.(ico|png|gif|jpg|css|js)$"
    transcoderFactoryClass="de.javakaffee.web.msm.serializer.kryo.KryoTranscoderFactory"
    />
</Context>

More details for all configuration attributes are provided in the section below.

After you have configured msm in the Context/Manager element, you can just start your application and sessions will be stored in the memcached nodes or in membase as configured. Now you should do some tests with a simulated tomcat failure, a restart of a memcached node etc. - have fun! :-)

Overview over memcached-session-manager configuration attributes

className (required)

This should be set to de.javakaffee.web.msm.MemcachedBackupSessionManager to get sessions stored in memcached. However, since version 1.3.6 there's also a de.javakaffee.web.msm.DummyMemcachedBackupSessionManager that can be used for development purposes: it simply serializes sessions to a special in memory map and deserializes the serialized data at the next request when a session is requested (without really using this session) - just to see if deserialization is working for each request. Your application is still using sessions as if the memcached-session-manager (or DummyMemcachedBackupSessionManager) would not be existing. Session serialization/deserialization is done asynchronously. The configuration attributes memcachedNodes and failoverNode are not used to create a memcached client, so serialized session data will not be sent to memcached - and therefore no running memcacheds are required.

 

memcachedNodes (required)

This attribute must contain all memcached nodes you have running, or the membase bucket uri(s). It should be the same for all tomcats.

memcached nodes: Each memcached node is defined as <id>:<host>:<port>. Several definitions are separated by space or comma (e.g. memcachedNodes="n1:app01:11211,n2:app02:11211"). For a single node the <id> is optional so that it's allowed to set only<host>:<port> (e.g. memcachedNodes="localhost:11211"). Then the sessionId will be left unchanged (no node id appended). This option is useful for the usage with e.g. membase+moxi, where each tomcat knows only a single "memcached" node (moxi actually).

membase bucket uris (since 1.6.0): For usage with membase it's possible to specify one or more membase bucket uris, e.g.http://host1:8091/pools,http://host2:8091/pools. Bucket name and password are specified via the attributes username andpassword (see below). Connecting to membase buckets requires the binary memcached protocol. Also remember to have thejettison.jar and netty.jar available in CATALINA_HOME/lib/.

 

failoverNodes (optional, must not be used for non-sticky sessions)

This attribute must contain the ids of the memcached nodes that must only be used for session backup when none of the other memcached nodes are available. Therefore, you should list those memcached nodes, that are running on the same machine as this tomcat. E.g. if you have tomcat1 and memcached1 (n1) running on host1, and tomcat2 and memcached2 (n2) on host2, then you set n1 as failover node for tomcat1, so that tomcat1 does only store sessions in memcached1 if memcached2 is not available (for tomcat2 failoverNodes would be set to n2). With this setting host1 could completely crash and sessions from tomcat1 would still be available.

 

For non-sticky sessions failoverNodes must not be specified as a session is not tied to a single tomcat. For membase buckets this attribute should also be left out.
Several memcached node ids are separated by space or comma.

username (since 1.6.0, optional)

Specifies the username used for a membase bucket or SASL. If the memcachedNodes contains a membase bucket uri (or multiple) this is the bucket name. If the memcachedNodes contains memcached node definitions this is the username used for SASL authentication. Both require the binary memcached protocol.

 

password (since 1.6.0, optional)

Specifies the password used for membase bucket or SASL authentication (can be left empty / omitted if the "default" membase bucket without a password shall be used).

 

memcachedProtocol (since 1.3, optional, default text)

This attribute specifies the memcached protocol to use, one of text or binary.

 

sticky (since 1.4.0, optional, default true)

Specifies if sticky or non-sticky sessions are used.

 

lockingMode (since 1.4.0, optional, for non-sticky sessions only, default none)

Specifies the locking strategy for non-sticky sessions. Session locking is useful to prevent concurrent modifications and lost updates of the session in the case of parallel requests (tabbed browsing with long requests, ajax etc.). Session locking is done using memcached. Possible values for lockingMode are:
  • none: sessions are never locked
  • all: the session is locked when requested by the app until the end of the request
  • auto: readonly requests are detected, for them the session is not locked. For requests that are not classified as "readonly" the session is locked
  • uriPattern:<regexp>: the provided regular expression pattern is compared with the requestURI + "?" + queryString and the session is locked if they match.

 

requestUriIgnorePattern (optional)

This attribute contains a regular expression for request URIs, that shall not trigger a session backup. If static resources like css, javascript, images etc. are delivered by the same tomcat and the same web application context these requests will also pass the memcached-session-manager. However, as these requests should not change anything in a http session, they should also not trigger a session backup. So you should check if any static resources are delivered by tomcat and in this case you should exclude them by using this attribute. The requestUriIgnorePattern must follow the java regex Pattern.

 

sessionBackupAsync (optional, default true)

Specifies if the session shall be stored asynchronously in memcached. If this is true, the backupThreadCount setting is evaluated. If this is false, the timeout set via sessionBackupTimeout is evaluated.

 

backupThreadCount (since 1.3, optional, default number-of-cpu-cores)

The number of threads that are used for asynchronous session backup (if sessionBackupAsync="true"). For the default value the number of available processors (cores) is used.

 

sessionBackupTimeout (optional, default 100)

The timeout in milliseconds after that a session backup is considered as beeing failed. This property is only evaluated if sessions are stored synchronously (set via sessionBackupAsync). The default value is 100 milliseconds.

 

operationTimeout (since 1.6.0, optional, default 1000)

The memcached operation timeout used at various places, e.g. used for the spymemcached ConnectionFactory.

 

storageKeyPrefix (since 1.8.0, optional, default webappVersion)

Allows to configure a prefix that's added to the session id when a session is stored in memcached. This is useful if there are multiple webapps sharing the same session id, e.g. because contexts are configured with sessionCookiePath="/" (tomcat 7, oremptySessionPath="true" in tomcat 6)

 

When tomcats parallel deployment is used there are also multiple webapps sharing the same session id. This is supported by default, because the default value (if storageKeyPrefix is not set explicitely) is webappVersion, so that the webapp version is used as prefix for the session id / key in memcached.
The storageKeyPrefix attribute supports both a static prefix (static:somePrefix) and dynamic values (host, context,webappVersion), multiple values can be specified seperated by comma.
Here are some examples that demonstrate which config would create which storage key (for a session id "foo" with context path "ctxt" and host "hst"):
  • static:x -> x_foo
  • host -> hst_foo
  • host.hash -> e93c085e_foo
  • context -> ctxt_foo
  • context.hash -> 45e6345f_foo
  • host,context -> hst:ctxt_foo
  • webappVersion -> 001_foo
  • host.hash,context.hash,webappVersion -> e93c085e:45e6345f:001_foo

sessionAttributeFilter (since 1.5.0, optional)

A regular expression to control which session attributes are serialized to memcached. The regular expression is evaluated with session attribute names. E.g. sessionAttributeFilter="^(userName|sessionHistory)$" specifies that only "userName" and "sessionHistory" attributes are stored in memcached. Works independently from the chosen serialization strategy.

 

transcoderFactoryClass (since 1.1, optional, default de.javakaffee.web.msm.JavaSerializationTranscoderFactory)

The class name of the factory that creates the transcoder to use for serializing/deserializing sessions to/from memcached. The specified class must implement de.javakaffee.web.msm.TranscoderFactory and provide a no-args constructor. Other TranscoderFactoryimplementations are available through other packages/jars like msm-kryo-serializermsm-xstream-serializer and msm-javolution-serializer (as describe above), those are listed and compared on SerializationStrategies.

 

Available TranscoderFactory implementations:

  • Java serialization: de.javakaffee.web.msm.JavaSerializationTranscoderFactory
  • Kryo based serialization: de.javakaffee.web.msm.serializer.kryo.KryoTranscoderFactory
  • Javolution based serialization: de.javakaffee.web.msm.serializer.javolution.JavolutionTranscoderFactory
  • XStream based serialization: de.javakaffee.web.msm.serializer.xstream.XStreamTranscoderFactory

copyCollectionsForSerialization (since 1.1, optional, default false)

A boolean value that specifies, if iterating over collection elements shall be done on a copy of the collection or on the collection itself. This configuration property must be supported by the serialization strategy specified with transcoderFactoryClass. Which strategy supports this feature can be seen in the column Copy Collections before serialization in the list of available serialization strategies. This feature and its motivation is described more deeply at SerializationStrategies#Concurrent_modifications_of_collections.

 

customConverter (since 1.2, optional)

Custom converter allow you to provide custom serialization of application specific types. Multiple custom converter class names are specified separated by comma (with optional space following the comma). Converter classes must be available in the classpath of the web application (place jars in WEB-INF/lib).

This option is useful if you need some special serialization for a certain type or if reflection based serialization is just very verbose and you want to provide a more efficient serialization for a specific type.

Custom converter must be supported by the serialization strategy specified with transcoderFactoryClass. Requirements regarding the specific custom converter classes depend on the actual serialization strategy, but a common requirement would be that they must provide a default/no-args constructor. For more details have a look at available serialization strategies.

 

Available converter implementations:

  • Kryo (converters provided by msm-kryo-serializer jar)
    • de.javakaffee.web.msm.serializer.kryo.JodaDateTimeRegistration: A more efficient serialization of Joda's DateTimewith kryo.
    • de.javakaffee.web.msm.serializer.kryo.CGLibProxySerializerFactory: serializes/deserializes CGLIB proxies.
    • de.javakaffee.web.msm.serializer.kryo.HibernateCollectionsSerializerFactory: serializes/deserializes hibernate persistent collections (required if you store collections loaded by hibernate in your session).
    • de.javakaffee.web.msm.serializer.kryo.WicketSerializerFactory: required if you're running a wicket web application.
    • de.javakaffee.web.msm.serializer.kryo.FacesLRUMapRegistration: Needed if kryo serialization shall be used in combination with JSF2/Mojarra (see also issue #97).
    • de.javakaffee.web.msm.serializer.kryo.GrailsFlashScopeRegistration: Support for grails flash scope (see also issue #107).
    • de.javakaffee.web.msm.serializer.kryo.SpringSecurityUserRegistration: Support for Spring Security User class (see also issue #145).
  • Javolution (converters provided by msm-javolution-serializer jar)
    • de.javakaffee.web.msm.serializer.javolution.JodaDateTimeFormat: A more efficient serialization of Joda's DateTime, see also issue #32.
    • de.javakaffee.web.msm.serializer.javolution.CGLibProxyFormat : serializes/deserializes CGLIB proxies, see alsoissue #59.
    • de.javakaffee.web.msm.serializer.javolution.HibernateCollectionsXMLFormat: serializes/deserializes hibernate persistent collections (required if you store collections loaded by hibernate in your session).

enableStatistics (since 1.2, optional, default true)

A boolean value that specifies, if statistics shall be gathered. For more info see the JMXStatistics page.

 

enabled (since 1.4.0, optional, default true)

Specifies if session storage in memcached is enabled or not, can also be changed at runtime via JMX. Only allowed in sticky mode.

 

Overview over available system properties (all optional)

msm.maxReconnectDelay (since 1.7, default 30)

The max reconnect delay for the spymemcached MemcachedClient, in seconds.

 

msm.nodeAvailabilityCacheTTL (since 1.7, default 1000)

The TTL for msm NodeAvailabilityCache entries, in millis.

 

msm.kryo.bufferSize.initial (since 1.1, default 102400)

The initial size in bytes of the kryo object buffer when (de)serializing a session. Is passed as initialCapacity when creating a kryoObjectBuffer.

 

msm.kryo.bufferSize.max (since 1.1, default 2048000)

The maximum size in bytes of the kryo object buffer when (de)serializing a session - the maximum size in bytes that a serialized session can take. Is passed as maxCapacity when creating a kryo ObjectBuffer.

 

msm.kryo.defaultSerializerFactory (since 1.8, default de.javakaffee.web.msm.serializer.kryo.ReferenceFieldSerializerFactory)

The factory to create the Serializer used by Kryo when Kryo#newDefaultSerializer is called. Must implementde.javakaffee.web.msm.serializer.kryo.KryoDefaultSerializerFactory.

 

Currently available implementations:
  • de.javakaffee.web.msm.serializer.kryo.ReferenceFieldSerializerFactory: Factory to create a ReferenceFieldSerializer, handling object references and cyclic graphs.
  • de.javakaffee.web.msm.serializer.kryo.CompatibleFieldSerializerFactory: Factory to create aCompatibleFieldSerializer, with limited support for forward and backward compatibility.

Configure logging

If you want to enable fine grained / debug logging you can add

de.javakaffee.web.msm.level=FINE

to $CATALINA_HOME/conf/logging.properties.

As the memcached-session-manager uses spymemcached also the logging hints of spymemcached might be interesting to you. A short summary how you can make spymemcached more silent:

  1. Add the following to $CATALINA_HOME/bin/catalina.sh:

 

CATALINA_OPTS="-Dnet.spy.log.LoggerImpl=net.spy.memcached.compat.log.SunLogger"
  1. Add this to $CATALINA_HOME/conf/logging.properties:
# A handler's log level threshold can be set using SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST or ALL
net.spy.memcached.level = WARNING
# To make only the MemcachedConnection less verbose:
#net.spy.memcached.MemcachedConnection.level = WARNING

More info about logging in tomcat can be found in the tomcat logging documentation.

版权声明:本文内容由阿里云实名注册用户自发贡献,版权归原作者所有,阿里云开发者社区不拥有其著作权,亦不承担相应法律责任。具体规则请查看《阿里云开发者社区用户服务协议》和《阿里云开发者社区知识产权保护指引》。如果您发现本社区中有涉嫌抄袭的内容,填写侵权投诉表单进行举报,一经查实,本社区将立刻删除涉嫌侵权内容。

相关文章
Tomcat集群session复制与Oracle的坑。。
问题描述 公司某个系统使用了tomcat自带的集群session复制功能,然后后报了一个oracle驱动包里面的连接不能被序列化的异常。
60 0
Tomcat集群session复制与Oracle的坑。。
​ image 问题描述 公司某个系统使用了tomcat自带的集群session复制功能,然后后报了一个oracle驱动包里面的连接不能被序列化的异常。
1522 0
SpringBoot 2.0.0新版和SpringBoot1.5.2版本中Tomcat配置的差别(坑)
2018年春SpringBoot 2.0.0 新版本有了很多新的改变,其中Tomcat配置上也有了很大改变 1、之前老的版本TomcatEmbeddedServletContainerFactory取的是这个类 2、在SpringBoot 2.
5474 0
在Eclipse中配置tomcat
1,Eclipse的安装。这个是从Eclipse的官方网站下载的。不用教吧,下载后exe文件执行安装。我的版本是,Eclipse SDKVersion: 3.4.2Build id: M20090211-17002,下载一个tomcat,从apache的官方网站上下载一个,我下的是,6.x版本,文件名为:apache-tomcat-6.0.20.exe地址http://tomcat.apache.org/download-60.cgi,下载windows版的,下载后exe文件一溜安装,安装内容部分的选项全选,其他全部默认配置,中间有个admin密码的地方,输入你自己设定的密码即可。
1174 0
155
文章
0
问答
文章排行榜
最热
最新
相关电子书
更多
低代码开发师(初级)实战教程
立即下载
阿里巴巴DevOps 最佳实践手册
立即下载
冬季实战营第三期:MySQL数据库进阶实战
立即下载