Press Y within 1 seconds to force filesystem integrity check....

简介:

PHP程序员让我删除一个缓存目录我怎么也删除不了 rm -rf mv cp 都显示只读文件系统,因为是内网服务器我就想重启下试下吧。结果...启动不起来了。(内网服务器是调试的程序都在这上面弄不好就完了Press <wbr>Y <wbr>within <wbr>1 <wbr>seconds <wbr>to <wbr>force <wbr>filesystem <wbr>integrity <wbr>check....

我就接上显示器一看 报的错误:

your system apperars to have shutdown uncleanly 

Press Y within 1 seconds to force filesystem integrity check....

checking root filesystem
我就进入单用户模式: e e = 1  回车 b

单用户模式他会自己检测 文件系统 ,然后检测失败,输入密码自己手动修复。。。。

*** AN error occurred during the file system check
*** Dropping you to a shell; the systm will reboot
*** when you leave the shell
Give root password for maintenance
(or type Control-D to continue):
Login incorrect.
(Repair filesystem) 1 #

(Repair filesystem) 2 #fsck -A -y

#上次非正常关机引起的,用fsck /dev/hdaX后reboot进入,或只用fsck来修复,只管y回车

 

(Repair filesystem) 3 #init 6

结果好了。。。


本文转自 houzaicunsky 51CTO博客,原文链接:   13页http://blog.51cto.com/hzcsky/475583

相关文章
|
5月前
|
Linux 开发工具
You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofi
linux配置环境变量操作失误出现:/usr/libexec/grepconf.sh: line 5: grep: command not found 的解决办法
211 2
|
7月前
|
缓存 数据安全/隐私保护 Windows
ECDSA host key for ... has changed and you have requested strict checking.Host key verification fail
ECDSA host key for ... has changed and you have requested strict checking.Host key verification fail
|
网络安全 开发工具
【解决方案】A session ended very soon after starting. Check that the command in profile “XXX” is correct.
【解决方案】A session ended very soon after starting. Check that the command in profile “XXX” is correct.
1120 0
【解决方案】A session ended very soon after starting. Check that the command in profile “XXX” is correct.
|
C语言
解决Dev-C++ [Error] ‘for‘ loop initial declarations are only allowed in C99 or C11 mode
Dev-C++ [Error] ‘for‘ loop initial declarations are only allowed in C99 or C11 mode
903 0
解决Dev-C++ [Error] ‘for‘ loop initial declarations are only allowed in C99 or C11 mode
|
安全 对象存储
set_time_limit() has been disabled for security reasons
set_time_limit() has been disabled for security reasons
174 0
set_time_limit() has been disabled for security reasons
‘Client‘ is not allowed to run in parallel.Would you like to stop the running one?
‘Client‘ is not allowed to run in parallel.Would you like to stop the running one?
589 0
‘Client‘ is not allowed to run in parallel.Would you like to stop the running one?
|
C语言
[Error] ‘for‘ loop initial declarations are only allowed in C99 mode
[Error] ‘for‘ loop initial declarations are only allowed in C99 mode
337 0
[Error] ‘for‘ loop initial declarations are only allowed in C99 mode