sudo apt-get install minicom
环境变量
MINICOM='-m -c on' export MINICOM
setup
neo@debian:~$ sudo minicom -s
TUI
+-----[configuration]------+ | Filenames and paths | | File transfer protocols | | Serial port setup | | Modem and dialing | | Screen and keyboard | | Save setup as dfl | | Save setup as.. | | Exit | | Exit from Minicom | +--------------------------+
选择 Serial port setup
+-----------------------------------------------------------------------+
| A - Serial Device : /dev/ttyS0 |
| B - Lockfile Location : /var/lock |
| C - Callin Program : |
| D - Callout Program : |
| E - Bps/Par/Bits : 9600 8N1 |
| F - Hardware Flow Control : Yes |
| G - Software Flow Control : No |
| |
| Change which setting? |
+-----------------------------------------------------------------------+
| Screen and keyboard |
| Save setup as dfl |
| Save setup as.. |
| Exit |
| Exit from Minicom |
+--------------------------+
使用A键和E键分别修改串口设备和波特率，然后ESC间推出，再将光标移动到Exit处按Enter键
Welcome to minicom 2.3
OPTIONS: I18n
Compiled on Sep 25 2009, 23:45:34.
Port /dev/ttyS0
Press CTRL-A Z for help on special keys
Translating "z"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address
Switch>AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0
^
% Invalid input detected at '^' marker.
Switch>en
Password:
Switch#show
Switch#show running-config
Building configuration...
Current configuration : 3265 bytes
!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Switch
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$zQct$RlZjEVk3PV//OrS4KYm46.
enable password 123456
!
no aaa new-model
system mtu routing 1500
ip subnet-zero
!
no ip dhcp snooping information option
!
--More--
CTRL-A Z for help | 9600 8N1 | NOR | Minicom 2.3 | VT102 | Offline
原文出处：Netkiller 系列 手札
本文作者：陈景峯
转载请与作者联系，同时请务必标明文章原始出处和作者信息及本声明。
