qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 1b22e 2002.

简介:
又一存储类故障,
两台DELL R610服务器.
HBA : 04:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
SWITCH : Brocade 300
System : RHEL 5.6 64bit
Storage : EVA6400
device mapper : device-mapper-multipath-0.4.7-42.el5

两台服务器同时报错:
qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 1b22e 2002.
qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 2603b 2002.
qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 2603c 2002.
qla2xxx 0000:04:00.1: scsi(2:0:2): Abort command issued -- 1 27437 2002.

qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: LIP reset occured (f700).
qla2xxx 0000:04:00.1: LIP occured (f700).
qla2xxx 0000:04:00.1: LIP reset occured (f7f7).
qla2xxx 0000:04:00.1: LOOP UP detected (4 Gbps).
qla2xxx 0000:04:00.1: qla2xxx_eh_bus_reset: reset succeeded
qla2xxx 0000:04:00.1: Mailbox command timeout occured. Issuing ISP abort.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: Failed mailbox send register test
qla2xxx 0000:04:00.1: qla2x00_abort_isp: **** FAILED ****
qla2xxx 0000:04:00.1: scsi(2:0:2): Abort command issued -- 0 64981 2003.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: LIP reset occured (f700).
qla2xxx 0000:04:00.1: LIP occured (f700).
qla2xxx 0000:04:00.1: LIP reset occured (f7f7).
qla2xxx 0000:04:00.1: LOOP UP detected (4 Gbps).
qla2xxx 0000:04:00.1: scsi(2:0:2): DEVICE RESET ISSUED.
qla2xxx 0000:04:00.1: Mailbox command timeout occured. Issuing ISP abort.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: Failed mailbox send register test
qla2xxx 0000:04:00.1: qla2x00_abort_isp: **** FAILED ****
qla2xxx 0000:04:00.1: qla2xxx_eh_device_reset: device reset failed
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: LIP reset occured (f700).
qla2xxx 0000:04:00.1: LIP occured (f700).
qla2xxx 0000:04:00.1: LIP reset occured (f7f7).
qla2xxx 0000:04:00.1: LOOP UP detected (4 Gbps).
qla2xxx 0000:04:00.1: scsi(2:0:2): LOOP RESET ISSUED.
qla2xxx 0000:04:00.1: Mailbox command timeout occured. Issuing ISP abort.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: Failed mailbox send register test
qla2xxx 0000:04:00.1: qla2x00_abort_isp: **** FAILED ****
 rport-2:0-0: blocked FC remote port time out: saving binding
 rport-2:0-1: blocked FC remote port time out: saving binding


提交qlogic CASE后建议执行:
ftp://ftp.qlogic.com/support/Hidden/scripts/qla_linux_info.sh


不过执行到Gathering OS info: ... done
Gathering /sys files: ... done
Gathering /proc files: ... done
Gathering /etc files: ... done
Gathering module information: ... done
Gathering ethernet info: ... done
Gathering infiniband info: ... done
Gathering miscellaneous system info:

的时候,就卡住了.IOSTAT显示HBA连接的存储使用率100%.
等待QLOGIC出示解决办法了。

之前碰到过类似的情况,使用MSA2312fc的存储,后来故障原因是存储的控制器有问题。
在其他地方还找到一个类似案例,据说是存储端得问题,需要重建RAID(也就意味着数据要迁出去再迁回来)。

# 20110608 CASE被转到了DELL
又有一套收集日志的方法

【其他】
尝试重新扫描设备 : 
find /sys/class/scsi_host/host*/scan | while read line; do echo - - - > $line; done
参考 : 
相关文章
|
6月前
|
Docker 容器
Docker错误:inotify_add_watch(7, /dev/dm-4, 10) failed: No such file or directory
Docker错误:inotify_add_watch(7, /dev/dm-4, 10) failed: No such file or directory
105 1
|
8月前
|
网络协议
VFS: Cannot open root device "nfs" or unknown-block(0,255)错误解决
VFS: Cannot open root device "nfs" or unknown-block(0,255)错误解决
167 0
autoreconf: command not found
autoreconf: command not found
294 0
g++: command not found
g++: command not found
48 0
sed: 1: “s/os.remove(“/xx/xxx. ...“: invalid command code f
sed: 1: “s/os.remove(“/xx/xxx. ...“: invalid command code f
|
网络安全
错误集--NFS报错clnt_create: RPC: Port mapper failure - Unable to receive: errno 113 (No route to host)
错误集--NFS报错clnt_create: RPC: Port mapper failure - Unable to receive: errno 113 (No route to host)
840 0
错误集--NFS报错clnt_create: RPC: Port mapper failure - Unable to receive: errno 113 (No route to host)
|
网络安全 Windows
解决adb报错“failed to create fdevent interrupt socketpair: Invalid argument“问题
解决adb报错“failed to create fdevent interrupt socketpair: Invalid argument“问题
280 0
解决adb报错“failed to create fdevent interrupt socketpair: Invalid argument“问题
|
移动开发 Linux Shell
$‘\r‘: command not found的解决方法
在Linux系统中,运行Shell脚本,出现了如下错误: one-more.sh: line 1: $'\r': command not found 1 出现这样的错误,是因为Shell脚本在Windows系统编写时,每行结尾是\r\n,而在Linux系统中行每行结尾是\n,所以在Linux系统中运行脚本时,会认为\r是一个字符,导致运行错误。
1155 0
|
Linux 数据安全/隐私保护