Docker安装redis

docker pull redis
docker images

mkdir-p /data/redis/conf
mkdir-p /data/redis/data
touch /data/redis/conf/redis.conf

vim /data/redis/conf/redis.conf
appendonly yes# 设置密码为rootrequirepass root
# 保存

# Redis configuration file example.## Note that in order to read the configuration file, Redis must be# started with the file path as first argument:## ./redis-server /path/to/redis.conf# Note on units: when memory size is needed, it is possible to specify# it in the usual form of 1k 5GB 4M and so forth:## 1k => 1000 bytes# 1kb => 1024 bytes# 1m => 1000000 bytes# 1mb => 1024*1024 bytes# 1g => 1000000000 bytes# 1gb => 1024*1024*1024 bytes## units are case insensitive so 1GB 1Gb 1gB are all the same.################################## INCLUDES #################################### Include one or more other config files here.  This is useful if you# have a standard template that goes to all Redis servers but also need# to customize a few per-server settings.  Include files can include# other files, so use this wisely.## Notice option "include" won't be rewritten by command "CONFIG REWRITE"# from admin or Redis Sentinel. Since Redis always uses the last processed# line as value of a configuration directive, you'd better put includes# at the beginning of this file to avoid overwriting config change at runtime.## If instead you are interested in using includes to override configuration# options, it is better to use include as the last line.## include /path/to/local.conf# include /path/to/other.conf################################## MODULES ###################################### Load modules at startup. If the server is not able to load modules# it will abort. It is possible to use multiple loadmodule directives.## loadmodule /path/to/my_module.so# loadmodule /path/to/other_module.so################################## NETWORK ###################################### By default, if no "bind" configuration directive is specified, Redis listens# for connections from all the network interfaces available on the server.# It is possible to listen to just one or multiple selected interfaces using# the "bind" configuration directive, followed by one or more IP addresses.## Examples:## bind 192.168.1.100 10.0.0.1# bind 127.0.0.1 ::1## ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the# internet, binding to all the interfaces is dangerous and will expose the# instance to everybody on the internet. So by default we uncomment the# following bind directive, that will force Redis to listen only into# the IPv4 loopback interface address (this means Redis will be able to# accept connections only from clients running into the same computer it# is running).## IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES# JUST COMMENT THE FOLLOWING LINE.# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~bind 127.0.0.1
# Protected mode is a layer of security protection, in order to avoid that# Redis instances left open on the internet are accessed and exploited.## When protected mode is on and if:## 1) The server is not binding explicitly to a set of addresses using the#    "bind" directive.# 2) No password is configured.## The server only accepts connections from clients connecting from the# IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain# sockets.## By default protected mode is enabled. You should disable it only if# you are sure you want clients from other hosts to connect to Redis# even if no authentication is configured, nor a specific set of interfaces# are explicitly listed using the "bind" directive.protected-mode yes# Accept connections on the specified port, default is 6379 (IANA #815344).# If port 0 is specified Redis will not listen on a TCP socket.port 6379# TCP listen() backlog.## In high requests-per-second environments you need an high backlog in order# to avoid slow clients connections issues. Note that the Linux kernel# will silently truncate it to the value of /proc/sys/net/core/somaxconn so# make sure to raise both the value of somaxconn and tcp_max_syn_backlog# in order to get the desired effect.tcp-backlog 511# Unix socket.## Specify the path for the Unix socket that will be used to listen for# incoming connections. There is no default, so Redis will not listen# on a unix socket when not specified.## unixsocket /tmp/redis.sock# unixsocketperm 700# Close the connection after a client is idle for N seconds (0 to disable)timeout 0# TCP keepalive.## If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence# of communication. This is useful for two reasons:## 1) Detect dead peers.# 2) Take the connection alive from the point of view of network#    equipment in the middle.## On Linux, the specified value (in seconds) is the period used to send ACKs.# Note that to close the connection the double of the time is needed.# On other kernels the period depends on the kernel configuration.## A reasonable value for this option is 300 seconds, which is the new# Redis default starting with Redis 3.2.1.tcp-keepalive 300################################# TLS/SSL ###################################### By default, TLS/SSL is disabled. To enable it, the "tls-port" configuration# directive can be used to define TLS-listening ports. To enable TLS on the# default port, use:## port 0# tls-port 6379# Configure a X.509 certificate and private key to use for authenticating the# server to connected clients, masters or cluster peers.  These files should be# PEM formatted.## tls-cert-file redis.crt # tls-key-file redis.key# Configure a DH parameters file to enable Diffie-Hellman (DH) key exchange:## tls-dh-params-file redis.dh# Configure a CA certificate(s) bundle or directory to authenticate TLS/SSL# clients and peers.  Redis requires an explicit configuration of at least one# of these, and will not implicitly use the system wide configuration.## tls-ca-cert-file ca.crt# tls-ca-cert-dir /etc/ssl/certs# By default, clients (including replica servers) on a TLS port are required# to authenticate using valid client side certificates.## It is possible to disable authentication using this directive.## tls-auth-clients no# By default, a Redis replica does not attempt to establish a TLS connection# with its master.## Use the following directive to enable TLS on replication links.## tls-replication yes# By default, the Redis Cluster bus uses a plain TCP connection. To enable# TLS for the bus protocol, use the following directive:## tls-cluster yes# Explicitly specify TLS versions to support. Allowed values are case insensitive# and include "TLSv1", "TLSv1.1", "TLSv1.2", "TLSv1.3" (OpenSSL >= 1.1.1) or# any combination. To enable only TLSv1.2 and TLSv1.3, use:## tls-protocols "TLSv1.2 TLSv1.3"# Configure allowed ciphers.  See the ciphers(1ssl) manpage for more information# about the syntax of this string.## Note: this configuration applies only to <= TLSv1.2.## tls-ciphers DEFAULT:!MEDIUM# Configure allowed TLSv1.3 ciphersuites.  See the ciphers(1ssl) manpage for more# information about the syntax of this string, and specifically for TLSv1.3# ciphersuites.## tls-ciphersuites TLS_CHACHA20_POLY1305_SHA256# When choosing a cipher, use the server's preference instead of the client# preference. By default, the server follows the client's preference.## tls-prefer-server-ciphers yes# By default, TLS session caching is enabled to allow faster and less expensive# reconnections by clients that support it. Use the following directive to disable# caching.## tls-session-caching no# Change the default number of TLS sessions cached. A zero value sets the cache# to unlimited size. The default size is 20480.## tls-session-cache-size 5000# Change the default timeout of cached TLS sessions. The default timeout is 300# seconds.## tls-session-cache-timeout 60################################# GENERAL ###################################### By default Redis does not run as a daemon. Use 'yes' if you need it.# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.daemonize no
# If you run Redis from upstart or systemd, Redis can interact with your# supervision tree. Options:#   supervised no      - no supervision interaction#   supervised upstart - signal upstart by putting Redis into SIGSTOP mode#   supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET#   supervised auto    - detect upstart or systemd method based on#                        UPSTART_JOB or NOTIFY_SOCKET environment variables# Note: these supervision methods only signal "process is ready."#       They do not enable continuous liveness pings back to your supervisor.supervised no
# If a pid file is specified, Redis writes it where specified at startup# and removes it at exit.## When the server runs non daemonized, no pid file is created if none is# specified in the configuration. When the server is daemonized, the pid file# is used even if not specified, defaulting to "/var/run/redis.pid".## Creating a pid file is best effort: if Redis is not able to create it# nothing bad happens, the server will start and run normally.pidfile /var/run/redis_6379.pid
# Specify the server verbosity level.# This can be one of:# debug (a lot of information, useful for development/testing)# verbose (many rarely useful info, but not a mess like the debug level)# notice (moderately verbose, what you want in production probably)# warning (only very important / critical messages are logged)loglevel notice
# Specify the log file name. Also the empty string can be used to force# Redis to log on the standard output. Note that if you use standard# output for logging but daemonize, logs will be sent to /dev/nulllogfile ""# To enable logging to the system logger, just set 'syslog-enabled' to yes,# and optionally update the other syslog parameters to suit your needs.# syslog-enabled no# Specify the syslog identity.# syslog-ident redis# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7.# syslog-facility local0# Set the number of databases. The default database is DB 0, you can select# a different one on a per-connection basis using SELECT <dbid> where# dbid is a number between 0 and 'databases'-1databases 16# By default Redis shows an ASCII art logo only when started to log to the# standard output and if the standard output is a TTY. Basically this means# that normally a logo is displayed only in interactive sessions.## However it is possible to force the pre-4.0 behavior and always show a# ASCII art logo in startup logs by setting the following option to yes.always-show-logo yes################################ SNAPSHOTTING  ################################## Save the DB on disk:##   save <seconds> <changes>##   Will save the DB if both the given number of seconds and the given#   number of write operations against the DB occurred.##   In the example below the behaviour will be to save:#   after 900 sec (15 min) if at least 1 key changed#   after 300 sec (5 min) if at least 10 keys changed#   after 60 sec if at least 10000 keys changed##   Note: you can disable saving completely by commenting out all "save" lines.##   It is also possible to remove all the previously configured save#   points by adding a save directive with a single empty string argument#   like in the following example:##   save ""save 9001save 30010save 6010000# By default Redis will stop accepting writes if RDB snapshots are enabled# (at least one save point) and the latest background save failed.# This will make the user aware (in a hard way) that data is not persisting# on disk properly, otherwise chances are that no one will notice and some# disaster will happen.## If the background saving process will start working again Redis will# automatically allow writes again.## However if you have setup your proper monitoring of the Redis server# and persistence, you may want to disable this feature so that Redis will# continue to work as usual even if there are problems with disk,# permissions, and so forth.stop-writes-on-bgsave-error yes# Compress string objects using LZF when dump .rdb databases?# For default that's set to 'yes' as it's almost always a win.# If you want to save some CPU in the saving child set it to 'no' but# the dataset will likely be bigger if you have compressible values or keys.rdbcompression yes# Since version 5 of RDB a CRC64 checksum is placed at the end of the file.# This makes the format more resistant to corruption but there is a performance# hit to pay (around 10%) when saving and loading RDB files, so you can disable it# for maximum performances.## RDB files created with checksum disabled have a checksum of zero that will# tell the loading code to skip the check.rdbchecksum yes# The filename where to dump the DBdbfilename dump.rdb
# Remove RDB files used by replication in instances without persistence# enabled. By default this option is disabled, however there are environments# where for regulations or other security concerns, RDB files persisted on# disk by masters in order to feed replicas, or stored on disk by replicas# in order to load them for the initial synchronization, should be deleted# ASAP. Note that this option ONLY WORKS in instances that have both AOF# and RDB persistence disabled, otherwise is completely ignored.## An alternative (and sometimes better) way to obtain the same effect is# to use diskless replication on both master and replicas instances. However# in the case of replicas, diskless is not always an option.rdb-del-sync-files no
# The working directory.## The DB will be written inside this directory, with the filename specified# above using the 'dbfilename' configuration directive.## The Append Only File will also be created inside this directory.## Note that you must specify a directory here, not a file name.dir ./
################################# REPLICATION ################################## Master-Replica replication. Use replicaof to make a Redis instance a copy of# another Redis server. A few things to understand ASAP about Redis replication.##   +------------------+      +---------------+#   |      Master      | ---> |    Replica    |#   | (receive writes) |      |  (exact copy) |#   +------------------+      +---------------+## 1) Redis replication is asynchronous, but you can configure a master to#    stop accepting writes if it appears to be not connected with at least#    a given number of replicas.# 2) Redis replicas are able to perform a partial resynchronization with the#    master if the replication link is lost for a relatively small amount of#    time. You may want to configure the replication backlog size (see the next#    sections of this file) with a sensible value depending on your needs.# 3) Replication is automatic and does not need user intervention. After a#    network partition replicas automatically try to reconnect to masters#    and resynchronize with them.## replicaof <masterip> <masterport># If the master is password protected (using the "requirepass" configuration# directive below) it is possible to tell the replica to authenticate before# starting the replication synchronization process, otherwise the master will# refuse the replica request.## masterauth <master-password>## However this is not enough if you are using Redis ACLs (for Redis version# 6 or greater), and the default user is not capable of running the PSYNC# command and/or other commands needed for replication. In this case it's# better to configure a special user to use with replication, and specify the# masteruser configuration as such:## masteruser <username>## When masteruser is specified, the replica will authenticate against its# master using the new AUTH form: AUTH <username> <password>.# When a replica loses its connection with the master, or when the replication# is still in progress, the replica can act in two different ways:## 1) if replica-serve-stale-data is set to 'yes' (the default) the replica will#    still reply to client requests, possibly with out of date data, or the#    data set may just be empty if this is the first synchronization.## 2) if replica-serve-stale-data is set to 'no' the replica will reply with#    an error "SYNC with master in progress" to all the kind of commands#    but to INFO, replicaOF, AUTH, PING, SHUTDOWN, REPLCONF, ROLE, CONFIG,#    SUBSCRIBE, UNSUBSCRIBE, PSUBSCRIBE, PUNSUBSCRIBE, PUBLISH, PUBSUB,#    COMMAND, POST, HOST: and LATENCY.#replica-serve-stale-data yes# You can configure a replica instance to accept writes or not. Writing against# a replica instance may be useful to store some ephemeral data (because data# written on a replica will be easily deleted after resync with the master) but# may also cause problems if clients are writing to it because of a# misconfiguration.## Since Redis 2.6 by default replicas are read-only.## Note: read only replicas are not designed to be exposed to untrusted clients# on the internet. It's just a protection layer against misuse of the instance.# Still a read only replica exports by default all the administrative commands# such as CONFIG, DEBUG, and so forth. To a limited extent you can improve# security of read only replicas using 'rename-command' to shadow all the# administrative / dangerous commands.replica-read-only yes# Replication SYNC strategy: disk or socket.## New replicas and reconnecting replicas that are not able to continue the# replication process just receiving differences, need to do what is called a# "full synchronization". An RDB file is transmitted from the master to the# replicas.## The transmission can happen in two different ways:## 1) Disk-backed: The Redis master creates a new process that writes the RDB#                 file on disk. Later the file is transferred by the parent#                 process to the replicas incrementally.# 2) Diskless: The Redis master creates a new process that directly writes the#              RDB file to replica sockets, without touching the disk at all.## With disk-backed replication, while the RDB file is generated, more replicas# can be queued and served with the RDB file as soon as the current child# producing the RDB file finishes its work. With diskless replication instead# once the transfer starts, new replicas arriving will be queued and a new# transfer will start when the current one terminates.## When diskless replication is used, the master waits a configurable amount of# time (in seconds) before starting the transfer in the hope that multiple# replicas will arrive and the transfer can be parallelized.## With slow disks and fast (large bandwidth) networks, diskless replication# works better.repl-diskless-sync no
# When diskless replication is enabled, it is possible to configure the delay# the server waits in order to spawn the child that transfers the RDB via socket# to the replicas.## This is important since once the transfer starts, it is not possible to serve# new replicas arriving, that will be queued for the next RDB transfer, so the# server waits a delay in order to let more replicas arrive.## The delay is specified in seconds, and by default is 5 seconds. To disable# it entirely just set it to 0 seconds and the transfer will start ASAP.repl-diskless-sync-delay 5# -----------------------------------------------------------------------------# WARNING: RDB diskless load is experimental. Since in this setup the replica# does not immediately store an RDB on disk, it may cause data loss during# failovers. RDB diskless load + Redis modules not handling I/O reads may also# cause Redis to abort in case of I/O errors during the initial synchronization# stage with the master. Use only if your do what you are doing.# -----------------------------------------------------------------------------## Replica can load the RDB it reads from the replication link directly from the# socket, or store the RDB to a file and read that file after it was completely# recived from the master.## In many cases the disk is slower than the network, and storing and loading# the RDB file may increase replication time (and even increase the master's# Copy on Write memory and salve buffers).# However, parsing the RDB file directly from the socket may mean that we have# to flush the contents of the current database before the full rdb was# received. For this reason we have the following options:## "disabled"    - Don't use diskless load (store the rdb file to the disk first)# "on-empty-db" - Use diskless load only when it is completely safe.# "swapdb"      - Keep a copy of the current db contents in RAM while parsing#                 the data directly from the socket. note that this requires#                 sufficient memory, if you don't have it, you risk an OOM kill.repl-diskless-load disabled
# Replicas send PINGs to server in a predefined interval. It's possible to# change this interval with the repl_ping_replica_period option. The default# value is 10 seconds.## repl-ping-replica-period 10# The following option sets the replication timeout for:## 1) Bulk transfer I/O during SYNC, from the point of view of replica.# 2) Master timeout from the point of view of replicas (data, pings).# 3) Replica timeout from the point of view of masters (REPLCONF ACK pings).## It is important to make sure that this value is greater than the value# specified for repl-ping-replica-period otherwise a timeout will be detected# every time there is low traffic between the master and the replica.## repl-timeout 60# Disable TCP_NODELAY on the replica socket after SYNC?## If you select "yes" Redis will use a smaller number of TCP packets and# less bandwidth to send data to replicas. But this can add a delay for# the data to appear on the replica side, up to 40 milliseconds with# Linux kernels using a default configuration.## If you select "no" the delay for data to appear on the replica side will# be reduced but more bandwidth will be used for replication.## By default we optimize for low latency, but in very high traffic conditions# or when the master and replicas are many hops away, turning this to "yes" may# be a good idea.repl-disable-tcp-nodelay no
# Set the replication backlog size. The backlog is a buffer that accumulates# replica data when replicas are disconnected for some time, so that when a# replica wants to reconnect again, often a full resync is not needed, but a# partial resync is enough, just passing the portion of data the replica# missed while disconnected.## The bigger the replication backlog, the longer the time the replica can be# disconnected and later be able to perform a partial resynchronization.## The backlog is only allocated once there is at least a replica connected.## repl-backlog-size 1mb# After a master has no longer connected replicas for some time, the backlog# will be freed. The following option configures the amount of seconds that# need to elapse, starting from the time the last replica disconnected, for# the backlog buffer to be freed.## Note that replicas never free the backlog for timeout, since they may be# promoted to masters later, and should be able to correctly "partially# resynchronize" with the replicas: hence they should always accumulate backlog.## A value of 0 means to never release the backlog.## repl-backlog-ttl 3600# The replica priority is an integer number published by Redis in the INFO# output. It is used by Redis Sentinel in order to select a replica to promote# into a master if the master is no longer working correctly.## A replica with a low priority number is considered better for promotion, so# for instance if there are three replicas with priority 10, 100, 25 Sentinel# will pick the one with priority 10, that is the lowest.## However a special priority of 0 marks the replica as not able to perform the# role of master, so a replica with priority of 0 will never be selected by# Redis Sentinel for promotion.## By default the priority is 100.replica-priority 100# It is possible for a master to stop accepting writes if there are less than# N replicas connected, having a lag less or equal than M seconds.## The N replicas need to be in "online" state.## The lag in seconds, that must be <= the specified value, is calculated from# the last ping received from the replica, that is usually sent every second.## This option does not GUARANTEE that N replicas will accept the write, but# will limit the window of exposure for lost writes in case not enough replicas# are available, to the specified number of seconds.## For example to require at least 3 replicas with a lag <= 10 seconds use:## min-replicas-to-write 3# min-replicas-max-lag 10## Setting one or the other to 0 disables the feature.## By default min-replicas-to-write is set to 0 (feature disabled) and# min-replicas-max-lag is set to 10.# A Redis master is able to list the address and port of the attached# replicas in different ways. For example the "INFO replication" section# offers this information, which is used, among other tools, by# Redis Sentinel in order to discover replica instances.# Another place where this info is available is in the output of the# "ROLE" command of a master.## The listed IP and address normally reported by a replica is obtained# in the following way:##   IP: The address is auto detected by checking the peer address#   of the socket used by the replica to connect with the master.##   Port: The port is communicated by the replica during the replication#   handshake, and is normally the port that the replica is using to#   listen for connections.## However when port forwarding or Network Address Translation (NAT) is# used, the replica may be actually reachable via different IP and port# pairs. The following two options can be used by a replica in order to# report to its master a specific set of IP and port, so that both INFO# and ROLE will report those values.## There is no need to use both the options if you need to override just# the port or the IP address.## replica-announce-ip 5.5.5.5# replica-announce-port 1234############################### KEYS TRACKING ################################## Redis implements server assisted support for client side caching of values.# This is implemented using an invalidation table that remembers, using# 16 millions of slots, what clients may have certain subsets of keys. In turn# this is used in order to send invalidation messages to clients. Please# to understand more about the feature check this page:##   https://redis.io/topics/client-side-caching## When tracking is enabled for a client, all the read only queries are assumed# to be cached: this will force Redis to store information in the invalidation# table. When keys are modified, such information is flushed away, and# invalidation messages are sent to the clients. However if the workload is# heavily dominated by reads, Redis could use more and more memory in order# to track the keys fetched by many clients.## For this reason it is possible to configure a maximum fill value for the# invalidation table. By default it is set to 1M of keys, and once this limit# is reached, Redis will start to evict keys in the invalidation table# even if they were not modified, just to reclaim memory: this will in turn# force the clients to invalidate the cached values. Basically the table# maximum size is a trade off between the memory you want to spend server# side to track information about who cached what, and the ability of clients# to retain cached objects in memory.## If you set the value to 0, it means there are no limits, and Redis will# retain as many keys as needed in the invalidation table.# In the "stats" INFO section, you can find information about the number of# keys in the invalidation table at every given moment.## Note: when key tracking is used in broadcasting mode, no memory is used# in the server side so this setting is useless.## tracking-table-max-keys 1000000################################## SECURITY #################################### Warning: since Redis is pretty fast an outside user can try up to# 1 million passwords per second against a modern box. This means that you# should use very strong passwords, otherwise they will be very easy to break.# Note that because the password is really a shared secret between the client# and the server, and should not be memorized by any human, the password# can be easily a long string from /dev/urandom or whatever, so by using a# long and unguessable password no brute force attack will be possible.# Redis ACL users are defined in the following format:##   user <username> ... acl rules ...## For example:##   user worker +@list +@connection ~jobs:* on >ffa9203c493aa99## The special username "default" is used for new connections. If this user# has the "nopass" rule, then new connections will be immediately authenticated# as the "default" user without the need of any password provided via the# AUTH command. Otherwise if the "default" user is not flagged with "nopass"# the connections will start in not authenticated state, and will require# AUTH (or the HELLO command AUTH option) in order to be authenticated and# start to work.## The ACL rules that describe what an user can do are the following:##  on           Enable the user: it is possible to authenticate as this user.#  off          Disable the user: it's no longer possible to authenticate#               with this user, however the already authenticated connections#               will still work.#  +<command>   Allow the execution of that command#  -<command>   Disallow the execution of that command#  +@<category> Allow the execution of all the commands in such category#               with valid categories are like @admin, @set, @sortedset, ...#               and so forth, see the full list in the server.c file where#               the Redis command table is described and defined.#               The special category @all means all the commands, but currently#               present in the server, and that will be loaded in the future#               via modules.#  +<command>|subcommand    Allow a specific subcommand of an otherwise#                           disabled command. Note that this form is not#                           allowed as negative like -DEBUG|SEGFAULT, but#                           only additive starting with "+".#  allcommands  Alias for +@all. Note that it implies the ability to execute#               all the future commands loaded via the modules system.#  nocommands   Alias for -@all.#  ~<pattern>   Add a pattern of keys that can be mentioned as part of#               commands. For instance ~* allows all the keys. The pattern#               is a glob-style pattern like the one of KEYS.#               It is possible to specify multiple patterns.#  allkeys      Alias for ~*#  resetkeys    Flush the list of allowed keys patterns.#  ><password>  Add this passowrd to the list of valid password for the user.#               For example >mypass will add "mypass" to the list.#               This directive clears the "nopass" flag (see later).#  <<password>  Remove this password from the list of valid passwords.#  nopass       All the set passwords of the user are removed, and the user#               is flagged as requiring no password: it means that every#               password will work against this user. If this directive is#               used for the default user, every new connection will be#               immediately authenticated with the default user without#               any explicit AUTH command required. Note that the "resetpass"#               directive will clear this condition.#  resetpass    Flush the list of allowed passwords. Moreover removes the#               "nopass" status. After "resetpass" the user has no associated#               passwords and there is no way to authenticate without adding#               some password (or setting it as "nopass" later).#  reset        Performs the following actions: resetpass, resetkeys, off,#               -@all. The user returns to the same state it has immediately#               after its creation.## ACL rules can be specified in any order: for instance you can start with# passwords, then flags, or key patterns. However note that the additive# and subtractive rules will CHANGE MEANING depending on the ordering.# For instance see the following example:##   user alice on +@all -DEBUG ~* >somepassword## This will allow "alice" to use all the commands with the exception of the# DEBUG command, since +@all added all the commands to the set of the commands# alice can use, and later DEBUG was removed. However if we invert the order# of two ACL rules the result will be different:##   user alice on -DEBUG +@all ~* >somepassword## Now DEBUG was removed when alice had yet no commands in the set of allowed# commands, later all the commands are added, so the user will be able to# execute everything.## Basically ACL rules are processed left-to-right.## For more information about ACL configuration please refer to# the Redis web site at https://redis.io/topics/acl# ACL LOG## The ACL Log tracks failed commands and authentication events associated# with ACLs. The ACL Log is useful to troubleshoot failed commands blocked # by ACLs. The ACL Log is stored in memory. You can reclaim memory with # ACL LOG RESET. Define the maximum entry length of the ACL Log below.acllog-max-len 128# Using an external ACL file## Instead of configuring users here in this file, it is possible to use# a stand-alone file just listing users. The two methods cannot be mixed:# if you configure users here and at the same time you activate the exteranl# ACL file, the server will refuse to start.## The format of the external ACL user file is exactly the same as the# format that is used inside redis.conf to describe users.## aclfile /etc/redis/users.acl# IMPORTANT NOTE: starting with Redis 6 "requirepass" is just a compatiblity# layer on top of the new ACL system. The option effect will be just setting# the password for the default user. Clients will still authenticate using# AUTH <password> as usually, or more explicitly with AUTH default <password># if they follow the new protocol: both will work.## requirepass foobared# Command renaming (DEPRECATED).## ------------------------------------------------------------------------# WARNING: avoid using this option if possible. Instead use ACLs to remove# commands from the default user, and put them only in some admin user you# create for administrative purposes.# ------------------------------------------------------------------------## It is possible to change the name of dangerous commands in a shared# environment. For instance the CONFIG command may be renamed into something# hard to guess so that it will still be available for internal-use tools# but not available for general clients.## Example:## rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52## It is also possible to completely kill a command by renaming it into# an empty string:## rename-command CONFIG ""## Please note that changing the name of commands that are logged into the# AOF file or transmitted to replicas may cause problems.################################### CLIENTS ##################################### Set the max number of connected clients at the same time. By default# this limit is set to 10000 clients, however if the Redis server is not# able to configure the process file limit to allow for the specified limit# the max number of allowed clients is set to the current file limit# minus 32 (as Redis reserves a few file descriptors for internal uses).## Once the limit is reached Redis will close all the new connections sending# an error 'max number of clients reached'.## IMPORTANT: When Redis Cluster is used, the max number of connections is also# shared with the cluster bus: every node in the cluster will use two# connections, one incoming and another outgoing. It is important to size the# limit accordingly in case of very large clusters.## maxclients 10000############################## MEMORY MANAGEMENT ################################# Set a memory usage limit to the specified amount of bytes.# When the memory limit is reached Redis will try to remove keys# according to the eviction policy selected (see maxmemory-policy).## If Redis can't remove keys according to the policy, or if the policy is# set to 'noeviction', Redis will start to reply with errors to commands# that would use more memory, like SET, LPUSH, and so on, and will continue# to reply to read-only commands like GET.## This option is usually useful when using Redis as an LRU or LFU cache, or to# set a hard memory limit for an instance (using the 'noeviction' policy).## WARNING: If you have replicas attached to an instance with maxmemory on,# the size of the output buffers needed to feed the replicas are subtracted# from the used memory count, so that network problems / resyncs will# not trigger a loop where keys are evicted, and in turn the output# buffer of replicas is full with DELs of keys evicted triggering the deletion# of more keys, and so forth until the database is completely emptied.## In short... if you have replicas attached it is suggested that you set a lower# limit for maxmemory so that there is some free RAM on the system for replica# output buffers (but this is not needed if the policy is 'noeviction').## maxmemory <bytes># MAXMEMORY POLICY: how Redis will select what to remove when maxmemory# is reached. You can select one from the following behaviors:## volatile-lru -> Evict using approximated LRU, only keys with an expire set.# allkeys-lru -> Evict any key using approximated LRU.# volatile-lfu -> Evict using approximated LFU, only keys with an expire set.# allkeys-lfu -> Evict any key using approximated LFU.# volatile-random -> Remove a random key having an expire set.# allkeys-random -> Remove a random key, any key.# volatile-ttl -> Remove the key with the nearest expire time (minor TTL)# noeviction -> Don't evict anything, just return an error on write operations.## LRU means Least Recently Used# LFU means Least Frequently Used## Both LRU, LFU and volatile-ttl are implemented using approximated# randomized algorithms.## Note: with any of the above policies, Redis will return an error on write#       operations, when there are no suitable keys for eviction.##       At the date of writing these commands are: set setnx setex append#       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd#       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby#       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby#       getset mset msetnx exec sort## The default is:## maxmemory-policy noeviction# LRU, LFU and minimal TTL algorithms are not precise algorithms but approximated# algorithms (in order to save memory), so you can tune it for speed or# accuracy. For default Redis will check five keys and pick the one that was# used less recently, you can change the sample size using the following# configuration directive.## The default of 5 produces good enough results. 10 Approximates very closely# true LRU but costs more CPU. 3 is faster but not very accurate.## maxmemory-samples 5# Starting from Redis 5, by default a replica will ignore its maxmemory setting# (unless it is promoted to master after a failover or manually). It means# that the eviction of keys will be just handled by the master, sending the# DEL commands to the replica as keys evict in the master side.## This behavior ensures that masters and replicas stay consistent, and is usually# what you want, however if your replica is writable, or you want the replica# to have a different memory setting, and you are sure all the writes performed# to the replica are idempotent, then you may change this default (but be sure# to understand what you are doing).## Note that since the replica by default does not evict, it may end using more# memory than the one set via maxmemory (there are certain buffers that may# be larger on the replica, or data structures may sometimes take more memory# and so forth). So make sure you monitor your replicas and make sure they# have enough memory to never hit a real out-of-memory condition before the# master hits the configured maxmemory setting.## replica-ignore-maxmemory yes# Redis reclaims expired keys in two ways: upon access when those keys are# found to be expired, and also in background, in what is called the# "active expire key". The key space is slowly and interactively scanned# looking for expired keys to reclaim, so that it is possible to free memory# of keys that are expired and will never be accessed again in a short time.## The default effort of the expire cycle will try to avoid having more than# ten percent of expired keys still in memory, and will try to avoid consuming# more than 25% of total memory and to add latency to the system. However# it is possible to increase the expire "effort" that is normally set to# "1", to a greater value, up to the value "10". At its maximum value the# system will use more CPU, longer cycles (and technically may introduce# more latency), and will tollerate less already expired keys still present# in the system. It's a tradeoff betweeen memory, CPU and latecy.## active-expire-effort 1############################# LAZY FREEING ##################################### Redis has two primitives to delete keys. One is called DEL and is a blocking# deletion of the object. It means that the server stops processing new commands# in order to reclaim all the memory associated with an object in a synchronous# way. If the key deleted is associated with a small object, the time needed# in order to execute the DEL command is very small and comparable to most other# O(1) or O(log_N) commands in Redis. However if the key is associated with an# aggregated value containing millions of elements, the server can block for# a long time (even seconds) in order to complete the operation.## For the above reasons Redis also offers non blocking deletion primitives# such as UNLINK (non blocking DEL) and the ASYNC option of FLUSHALL and# FLUSHDB commands, in order to reclaim memory in background. Those commands# are executed in constant time. Another thread will incrementally free the# object in the background as fast as possible.## DEL, UNLINK and ASYNC option of FLUSHALL and FLUSHDB are user-controlled.# It's up to the design of the application to understand when it is a good# idea to use one or the other. However the Redis server sometimes has to# delete keys or flush the whole database as a side effect of other operations.# Specifically Redis deletes objects independently of a user call in the# following scenarios:## 1) On eviction, because of the maxmemory and maxmemory policy configurations,#    in order to make room for new data, without going over the specified#    memory limit.# 2) Because of expire: when a key with an associated time to live (see the#    EXPIRE command) must be deleted from memory.# 3) Because of a side effect of a command that stores data on a key that may#    already exist. For example the RENAME command may delete the old key#    content when it is replaced with another one. Similarly SUNIONSTORE#    or SORT with STORE option may delete existing keys. The SET command#    itself removes any old content of the specified key in order to replace#    it with the specified string.# 4) During replication, when a replica performs a full resynchronization with#    its master, the content of the whole database is removed in order to#    load the RDB file just transferred.## In all the above cases the default is to delete objects in a blocking way,# like if DEL was called. However you can configure each case specifically# in order to instead release memory in a non-blocking way like if UNLINK# was called, using the following configuration directives.lazyfree-lazy-eviction no
lazyfree-lazy-expire no
lazyfree-lazy-server-del no
replica-lazy-flush no
# It is also possible, for the case when to replace the user code DEL calls# with UNLINK calls is not easy, to modify the default behavior of the DEL# command to act exactly like UNLINK, using the following configuration# directive:lazyfree-lazy-user-del no
################################ THREADED I/O ################################## Redis is mostly single threaded, however there are certain threaded# operations such as UNLINK, slow I/O accesses and other things that are# performed on side threads.## Now it is also possible to handle Redis clients socket reads and writes# in different I/O threads. Since especially writing is so slow, normally# Redis users use pipelining in order to speedup the Redis performances per# core, and spawn multiple instances in order to scale more. Using I/O# threads it is possible to easily speedup two times Redis without resorting# to pipelining nor sharding of the instance.## By default threading is disabled, we suggest enabling it only in machines# that have at least 4 or more cores, leaving at least one spare core.# Using more than 8 threads is unlikely to help much. We also recommend using# threaded I/O only if you actually have performance problems, with Redis# instances being able to use a quite big percentage of CPU time, otherwise# there is no point in using this feature.## So for instance if you have a four cores boxes, try to use 2 or 3 I/O# threads, if you have a 8 cores, try to use 6 threads. In order to# enable I/O threads use the following configuration directive:## io-threads 4## Setting io-threads to 1 will just use the main thread as usually.# When I/O threads are enabled, we only use threads for writes, that is# to thread the write(2) syscall and transfer the client buffers to the# socket. However it is also possible to enable threading of reads and# protocol parsing using the following configuration directive, by setting# it to yes:## io-threads-do-reads no## Usually threading reads doesn't help much.## NOTE 1: This configuration directive cannot be changed at runtime via# CONFIG SET. Aso this feature currently does not work when SSL is# enabled.## NOTE 2: If you want to test the Redis speedup using redis-benchmark, make# sure you also run the benchmark itself in threaded mode, using the# --threads option to match the number of Redis theads, otherwise you'll not# be able to notice the improvements.############################## APPEND ONLY MODE ################################ By default Redis asynchronously dumps the dataset on disk. This mode is# good enough in many applications, but an issue with the Redis process or# a power outage may result into a few minutes of writes lost (depending on# the configured save points).## The Append Only File is an alternative persistence mode that provides# much better durability. For instance using the default data fsync policy# (see later in the config file) Redis can lose just one second of writes in a# dramatic event like a server power outage, or a single write if something# wrong with the Redis process itself happens, but the operating system is# still running correctly.## AOF and RDB persistence can be enabled at the same time without problems.# If the AOF is enabled on startup Redis will load the AOF, that is the file# with the better durability guarantees.## Please check http://redis.io/topics/persistence for more information.appendonly no
# The name of the append only file (default: "appendonly.aof")appendfilename "appendonly.aof"# The fsync() call tells the Operating System to actually write data on disk# instead of waiting for more data in the output buffer. Some OS will really flush# data on disk, some other OS will just try to do it ASAP.## Redis supports three different modes:## no: don't fsync, just let the OS flush the data when it wants. Faster.# always: fsync after every write to the append only log. Slow, Safest.# everysec: fsync only one time every second. Compromise.## The default is "everysec", as that's usually the right compromise between# speed and data safety. It's up to you to understand if you can relax this to# "no" that will let the operating system flush the output buffer when# it wants, for better performances (but if you can live with the idea of# some data loss consider the default persistence mode that's snapshotting),# or on the contrary, use "always" that's very slow but a bit safer than# everysec.## More details please check the following article:# http://antirez.com/post/redis-persistence-demystified.html## If unsure, use "everysec".# appendfsync alwaysappendfsync everysec
# appendfsync no# When the AOF fsync policy is set to always or everysec, and a background# saving process (a background save or AOF log background rewriting) is# performing a lot of I/O against the disk, in some Linux configurations# Redis may block too long on the fsync() call. Note that there is no fix for# this currently, as even performing fsync in a different thread will block# our synchronous write(2) call.## In order to mitigate this problem it's possible to use the following option# that will prevent fsync() from being called in the main process while a# BGSAVE or BGREWRITEAOF is in progress.## This means that while another child is saving, the durability of Redis is# the same as "appendfsync none". In practical terms, this means that it is# possible to lose up to 30 seconds of log in the worst scenario (with the# default Linux settings).## If you have latency problems turn this to "yes". Otherwise leave it as# "no" that is the safest pick from the point of view of durability.no-appendfsync-on-rewrite no
# Automatic rewrite of the append only file.# Redis is able to automatically rewrite the log file implicitly calling# BGREWRITEAOF when the AOF log size grows by the specified percentage.## This is how it works: Redis remembers the size of the AOF file after the# latest rewrite (if no rewrite has happened since the restart, the size of# the AOF at startup is used).## This base size is compared to the current size. If the current size is# bigger than the specified percentage, the rewrite is triggered. Also# you need to specify a minimal size for the AOF file to be rewritten, this# is useful to avoid rewriting the AOF file even if the percentage increase# is reached but it is still pretty small.## Specify a percentage of zero in order to disable the automatic AOF# rewrite feature.auto-aof-rewrite-percentage 100auto-aof-rewrite-min-size 64mb
# An AOF file may be found to be truncated at the end during the Redis# startup process, when the AOF data gets loaded back into memory.# This may happen when the system where Redis is running# crashes, especially when an ext4 filesystem is mounted without the# data=ordered option (however this can't happen when Redis itself# crashes or aborts but the operating system still works correctly).## Redis can either exit with an error when this happens, or load as much# data as possible (the default now) and start if the AOF file is found# to be truncated at the end. The following option controls this behavior.## If aof-load-truncated is set to yes, a truncated AOF file is loaded and# the Redis server starts emitting a log to inform the user of the event.# Otherwise if the option is set to no, the server aborts with an error# and refuses to start. When the option is set to no, the user requires# to fix the AOF file using the "redis-check-aof" utility before to restart# the server.## Note that if the AOF file will be found to be corrupted in the middle# the server will still exit with an error. This option only applies when# Redis will try to read more data from the AOF file but not enough bytes# will be found.aof-load-truncated yes# When rewriting the AOF file, Redis is able to use an RDB preamble in the# AOF file for faster rewrites and recoveries. When this option is turned# on the rewritten AOF file is composed of two different stanzas:##   [RDB file][AOF tail]## When loading Redis recognizes that the AOF file starts with the "REDIS"# string and loads the prefixed RDB file, and continues loading the AOF# tail.aof-use-rdb-preamble yes################################ LUA SCRIPTING  ################################ Max execution time of a Lua script in milliseconds.## If the maximum execution time is reached Redis will log that a script is# still in execution after the maximum allowed time and will start to# reply to queries with an error.## When a long running script exceeds the maximum execution time only the# SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be# used to stop a script that did not yet called write commands. The second# is the only way to shut down the server in the case a write command was# already issued by the script but the user doesn't want to wait for the natural# termination of the script.## Set it to 0 or a negative value for unlimited execution without warnings.lua-time-limit 5000################################ REDIS CLUSTER  ################################ Normal Redis instances can't be part of a Redis Cluster; only nodes that are# started as cluster nodes can. In order to start a Redis instance as a# cluster node enable the cluster support uncommenting the following:## cluster-enabled yes# Every cluster node has a cluster configuration file. This file is not# intended to be edited by hand. It is created and updated by Redis nodes.# Every Redis Cluster node requires a different cluster configuration file.# Make sure that instances running in the same system do not have# overlapping cluster configuration file names.## cluster-config-file nodes-6379.conf# Cluster node timeout is the amount of milliseconds a node must be unreachable# for it to be considered in failure state.# Most other internal time limits are multiple of the node timeout.## cluster-node-timeout 15000# A replica of a failing master will avoid to start a failover if its data# looks too old.## There is no simple way for a replica to actually have an exact measure of# its "data age", so the following two checks are performed:## 1) If there are multiple replicas able to failover, they exchange messages#    in order to try to give an advantage to the replica with the best#    replication offset (more data from the master processed).#    Replicas will try to get their rank by offset, and apply to the start#    of the failover a delay proportional to their rank.## 2) Every single replica computes the time of the last interaction with#    its master. This can be the last ping or command received (if the master#    is still in the "connected" state), or the time that elapsed since the#    disconnection with the master (if the replication link is currently down).#    If the last interaction is too old, the replica will not try to failover#    at all.## The point "2" can be tuned by user. Specifically a replica will not perform# the failover if, since the last interaction with the master, the time# elapsed is greater than:##   (node-timeout * replica-validity-factor) + repl-ping-replica-period## So for example if node-timeout is 30 seconds, and the replica-validity-factor# is 10, and assuming a default repl-ping-replica-period of 10 seconds, the# replica will not try to failover if it was not able to talk with the master# for longer than 310 seconds.## A large replica-validity-factor may allow replicas with too old data to failover# a master, while a too small value may prevent the cluster from being able to# elect a replica at all.## For maximum availability, it is possible to set the replica-validity-factor# to a value of 0, which means, that replicas will always try to failover the# master regardless of the last time they interacted with the master.# (However they'll always try to apply a delay proportional to their# offset rank).## Zero is the only value able to guarantee that when all the partitions heal# the cluster will always be able to continue.## cluster-replica-validity-factor 10# Cluster replicas are able to migrate to orphaned masters, that are masters# that are left without working replicas. This improves the cluster ability# to resist to failures as otherwise an orphaned master can't be failed over# in case of failure if it has no working replicas.## Replicas migrate to orphaned masters only if there are still at least a# given number of other working replicas for their old master. This number# is the "migration barrier". A migration barrier of 1 means that a replica# will migrate only if there is at least 1 other working replica for its master# and so forth. It usually reflects the number of replicas you want for every# master in your cluster.## Default is 1 (replicas migrate only if their masters remain with at least# one replica). To disable migration just set it to a very large value.# A value of 0 can be set but is useful only for debugging and dangerous# in production.## cluster-migration-barrier 1# By default Redis Cluster nodes stop accepting queries if they detect there# is at least an hash slot uncovered (no available node is serving it).# This way if the cluster is partially down (for example a range of hash slots# are no longer covered) all the cluster becomes, eventually, unavailable.# It automatically returns available as soon as all the slots are covered again.## However sometimes you want the subset of the cluster which is working,# to continue to accept queries for the part of the key space that is still# covered. In order to do so, just set the cluster-require-full-coverage# option to no.## cluster-require-full-coverage yes# This option, when set to yes, prevents replicas from trying to failover its# master during master failures. However the master can still perform a# manual failover, if forced to do so.## This is useful in different scenarios, especially in the case of multiple# data center operations, where we want one side to never be promoted if not# in the case of a total DC failure.## cluster-replica-no-failover no# This option, when set to yes, allows nodes to serve read traffic while the# the cluster is in a down state, as long as it believes it owns the slots. ## This is useful for two cases.  The first case is for when an application # doesn't require consistency of data during node failures or network partitions.# One example of this is a cache, where as long as the node has the data it# should be able to serve it. ## The second use case is for configurations that don't meet the recommended  # three shards but want to enable cluster mode and scale later. A # master outage in a 1 or 2 shard configuration causes a read/write outage to the# entire cluster without this option set, with it set there is only a write outage.# Without a quorum of masters, slot ownership will not change automatically. ## cluster-allow-reads-when-down no# In order to setup your cluster make sure to read the documentation# available at http://redis.io web site.########################## CLUSTER DOCKER/NAT support  ######################### In certain deployments, Redis Cluster nodes address discovery fails, because# addresses are NAT-ted or because ports are forwarded (the typical case is# Docker and other containers).## In order to make Redis Cluster working in such environments, a static# configuration where each node knows its public address is needed. The# following two options are used for this scope, and are:## * cluster-announce-ip# * cluster-announce-port# * cluster-announce-bus-port## Each instruct the node about its address, client port, and cluster message# bus port. The information is then published in the header of the bus packets# so that other nodes will be able to correctly map the address of the node# publishing the information.## If the above options are not used, the normal Redis Cluster auto-detection# will be used instead.## Note that when remapped, the bus port may not be at the fixed offset of# clients port + 10000, so you can specify any port and bus-port depending# on how they get remapped. If the bus-port is not set, a fixed offset of# 10000 will be used as usually.## Example:## cluster-announce-ip 10.1.1.5# cluster-announce-port 6379# cluster-announce-bus-port 6380################################## SLOW LOG #################################### The Redis Slow Log is a system to log queries that exceeded a specified# execution time. The execution time does not include the I/O operations# like talking with the client, sending the reply and so forth,# but just the time needed to actually execute the command (this is the only# stage of command execution where the thread is blocked and can not serve# other requests in the meantime).## You can configure the slow log with two parameters: one tells Redis# what is the execution time, in microseconds, to exceed in order for the# command to get logged, and the other parameter is the length of the# slow log. When a new command is logged the oldest one is removed from the# queue of logged commands.# The following time is expressed in microseconds, so 1000000 is equivalent# to one second. Note that a negative number disables the slow log, while# a value of zero forces the logging of every command.slowlog-log-slower-than 10000# There is no limit to this length. Just be aware that it will consume memory.# You can reclaim memory used by the slow log with SLOWLOG RESET.slowlog-max-len 128################################ LATENCY MONITOR ############################### The Redis latency monitoring subsystem samples different operations# at runtime in order to collect data related to possible sources of# latency of a Redis instance.## Via the LATENCY command this information is available to the user that can# print graphs and obtain reports.## The system only logs operations that were performed in a time equal or# greater than the amount of milliseconds specified via the# latency-monitor-threshold configuration directive. When its value is set# to zero, the latency monitor is turned off.## By default latency monitoring is disabled since it is mostly not needed# if you don't have latency issues, and collecting data has a performance# impact, that while very small, can be measured under big load. Latency# monitoring can easily be enabled at runtime using the command# "CONFIG SET latency-monitor-threshold <milliseconds>" if needed.latency-monitor-threshold 0############################# EVENT NOTIFICATION ############################### Redis can notify Pub/Sub clients about events happening in the key space.# This feature is documented at http://redis.io/topics/notifications## For instance if keyspace events notification is enabled, and a client# performs a DEL operation on key "foo" stored in the Database 0, two# messages will be published via Pub/Sub:## PUBLISH __keyspace@0__:foo del# PUBLISH __keyevent@0__:del foo## It is possible to select the events that Redis will notify among a set# of classes. Every class is identified by a single character:##  K     Keyspace events, published with __keyspace@<db>__ prefix.#  E     Keyevent events, published with __keyevent@<db>__ prefix.#  g     Generic commands (non-type specific) like DEL, EXPIRE, RENAME, ...#  $     String commands#  l     List commands#  s     Set commands#  h     Hash commands#  z     Sorted set commands#  x     Expired events (events generated every time a key expires)#  e     Evicted events (events generated when a key is evicted for maxmemory)#  t     Stream commands#  m     Key-miss events (Note: It is not included in the 'A' class)#  A     Alias for g$lshzxet, so that the "AKE" string means all the events#        (Except key-miss events which are excluded from 'A' due to their#         unique nature).##  The "notify-keyspace-events" takes as argument a string that is composed#  of zero or multiple characters. The empty string means that notifications#  are disabled.##  Example: to enable list and generic events, from the point of view of the#           event name, use:##  notify-keyspace-events Elg##  Example 2: to get the stream of the expired keys subscribing to channel#             name __keyevent@0__:expired use:##  notify-keyspace-events Ex##  By default all notifications are disabled because most users don't need#  this feature and the feature has some overhead. Note that if you don't#  specify at least one of K or E, no events will be delivered.notify-keyspace-events ""############################### GOPHER SERVER ################################## Redis contains an implementation of the Gopher protocol, as specified in# the RFC 1436 (https://www.ietf.org/rfc/rfc1436.txt).## The Gopher protocol was very popular in the late '90s. It is an alternative# to the web, and the implementation both server and client side is so simple# that the Redis server has just 100 lines of code in order to implement this# support.## What do you do with Gopher nowadays? Well Gopher never *really* died, and# lately there is a movement in order for the Gopher more hierarchical content# composed of just plain text documents to be resurrected. Some want a simpler# internet, others believe that the mainstream internet became too much# controlled, and it's cool to create an alternative space for people that# want a bit of fresh air.## Anyway for the 10nth birthday of the Redis, we gave it the Gopher protocol# as a gift.## --- HOW IT WORKS? ---## The Redis Gopher support uses the inline protocol of Redis, and specifically# two kind of inline requests that were anyway illegal: an empty request# or any request that starts with "/" (there are no Redis commands starting# with such a slash). Normal RESP2/RESP3 requests are completely out of the# path of the Gopher protocol implementation and are served as usually as well.## If you open a connection to Redis when Gopher is enabled and send it# a string like "/foo", if there is a key named "/foo" it is served via the# Gopher protocol.## In order to create a real Gopher "hole" (the name of a Gopher site in Gopher# talking), you likely need a script like the following:##   https://github.com/antirez/gopher2redis## --- SECURITY WARNING ---## If you plan to put Redis on the internet in a publicly accessible address# to server Gopher pages MAKE SURE TO SET A PASSWORD to the instance.# Once a password is set:##   1. The Gopher server (when enabled, not by default) will still serve#      content via Gopher.#   2. However other commands cannot be called before the client will#      authenticate.## So use the 'requirepass' option to protect your instance.## To enable Gopher support uncomment the following line and set# the option from no (the default) to yes.## gopher-enabled no############################### ADVANCED CONFIG ################################ Hashes are encoded using a memory efficient data structure when they have a# small number of entries, and the biggest entry does not exceed a given# threshold. These thresholds can be configured using the following directives.hash-max-ziplist-entries 512hash-max-ziplist-value 64# Lists are also encoded in a special way to save a lot of space.# The number of entries allowed per internal list node can be specified# as a fixed maximum size or a maximum number of elements.# For a fixed maximum size, use -5 through -1, meaning:# -5: max size: 64 Kb  <-- not recommended for normal workloads# -4: max size: 32 Kb  <-- not recommended# -3: max size: 16 Kb  <-- probably not recommended# -2: max size: 8 Kb   <-- good# -1: max size: 4 Kb   <-- good# Positive numbers mean store up to _exactly_ that number of elements# per list node.# The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size),# but if your use case is unique, adjust the settings as necessary.list-max-ziplist-size -2# Lists may also be compressed.# Compress depth is the number of quicklist ziplist nodes from *each* side of# the list to *exclude* from compression.  The head and tail of the list# are always uncompressed for fast push/pop operations.  Settings are:# 0: disable all list compression# 1: depth 1 means "don't start compressing until after 1 node into the list,#    going from either the head or tail"#    So: [head]->node->node->...->node->[tail]#    [head], [tail] will always be uncompressed; inner nodes will compress.# 2: [head]->[next]->node->node->...->node->[prev]->[tail]#    2 here means: don't compress head or head->next or tail->prev or tail,#    but compress all nodes between them.# 3: [head]->[next]->[next]->node->node->...->node->[prev]->[prev]->[tail]# etc.list-compress-depth 0# Sets have a special encoding in just one case: when a set is composed# of just strings that happen to be integers in radix 10 in the range# of 64 bit signed integers.# The following configuration setting sets the limit in the size of the# set in order to use this special memory saving encoding.set-max-intset-entries 512# Similarly to hashes and lists, sorted sets are also specially encoded in# order to save a lot of space. This encoding is only used when the length and# elements of a sorted set are below the following limits:zset-max-ziplist-entries 128zset-max-ziplist-value 64# HyperLogLog sparse representation bytes limit. The limit includes the# 16 bytes header. When an HyperLogLog using the sparse representation crosses# this limit, it is converted into the dense representation.## A value greater than 16000 is totally useless, since at that point the# dense representation is more memory efficient.## The suggested value is ~ 3000 in order to have the benefits of# the space efficient encoding without slowing down too much PFADD,# which is O(N) with the sparse encoding. The value can be raised to# ~ 10000 when CPU is not a concern, but space is, and the data set is# composed of many HyperLogLogs with cardinality in the 0 - 15000 range.hll-sparse-max-bytes 3000# Streams macro node max size / items. The stream data structure is a radix# tree of big nodes that encode multiple items inside. Using this configuration# it is possible to configure how big a single node can be in bytes, and the# maximum number of items it may contain before switching to a new node when# appending new stream entries. If any of the following settings are set to# zero, the limit is ignored, so for instance it is possible to set just a# max entires limit by setting max-bytes to 0 and max-entries to the desired# value.stream-node-max-bytes 4096stream-node-max-entries 100# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in# order to help rehashing the main Redis hash table (the one mapping top-level# keys to values). The hash table implementation Redis uses (see dict.c)# performs a lazy rehashing: the more operation you run into a hash table# that is rehashing, the more rehashing "steps" are performed, so if the# server is idle the rehashing is never complete and some more memory is used# by the hash table.## The default is to use this millisecond 10 times every second in order to# actively rehash the main dictionaries, freeing memory when possible.## If unsure:# use "activerehashing no" if you have hard latency requirements and it is# not a good thing in your environment that Redis can reply from time to time# to queries with 2 milliseconds delay.## use "activerehashing yes" if you don't have such hard requirements but# want to free memory asap when possible.activerehashing yes# The client output buffer limits can be used to force disconnection of clients# that are not reading data from the server fast enough for some reason (a# common reason is that a Pub/Sub client can't consume messages as fast as the# publisher can produce them).## The limit can be set differently for the three different classes of clients:## normal -> normal clients including MONITOR clients# replica  -> replica clients# pubsub -> clients subscribed to at least one pubsub channel or pattern## The syntax of every client-output-buffer-limit directive is the following:## client-output-buffer-limit <class> <hard limit> <soft limit> <soft seconds>## A client is immediately disconnected once the hard limit is reached, or if# the soft limit is reached and remains reached for the specified number of# seconds (continuously).# So for instance if the hard limit is 32 megabytes and the soft limit is# 16 megabytes / 10 seconds, the client will get disconnected immediately# if the size of the output buffers reach 32 megabytes, but will also get# disconnected if the client reaches 16 megabytes and continuously overcomes# the limit for 10 seconds.## By default normal clients are not limited because they don't receive data# without asking (in a push way), but just after a request, so only# asynchronous clients may create a scenario where data is requested faster# than it can read.## Instead there is a default limit for pubsub and replica clients, since# subscribers and replicas receive data in a push fashion.## Both the hard or the soft limit can be disabled by setting them to zero.client-output-buffer-limit normal 000client-output-buffer-limit replica 256mb 64mb 60client-output-buffer-limit pubsub 32mb 8mb 60# Client query buffers accumulate new commands. They are limited to a fixed# amount by default in order to avoid that a protocol desynchronization (for# instance due to a bug in the client) will lead to unbound memory usage in# the query buffer. However you can configure it here if you have very special# needs, such us huge multi/exec requests or alike.## client-query-buffer-limit 1gb# In the Redis protocol, bulk requests, that are, elements representing single# strings, are normally limited ot 512 mb. However you can change this limit# here.## proto-max-bulk-len 512mb# Redis calls an internal function to perform many background tasks, like# closing connections of clients in timeout, purging expired keys that are# never requested, and so forth.## Not all tasks are performed with the same frequency, but Redis checks for# tasks to perform according to the specified "hz" value.## By default "hz" is set to 10. Raising the value will use more CPU when# Redis is idle, but at the same time will make Redis more responsive when# there are many keys expiring at the same time, and timeouts may be# handled with more precision.## The range is between 1 and 500, however a value over 100 is usually not# a good idea. Most users should use the default of 10 and raise this up to# 100 only in environments where very low latency is required.hz 10# Normally it is useful to have an HZ value which is proportional to the# number of clients connected. This is useful in order, for instance, to# avoid too many clients are processed for each background task invocation# in order to avoid latency spikes.## Since the default HZ value by default is conservatively set to 10, Redis# offers, and enables by default, the ability to use an adaptive HZ value# which will temporary raise when there are many connected clients.## When dynamic HZ is enabled, the actual configured HZ will be used# as a baseline, but multiples of the configured HZ value will be actually# used as needed once more clients are connected. In this way an idle# instance will use very little CPU time while a busy instance will be# more responsive.dynamic-hz yes# When a child rewrites the AOF file, if the following option is enabled# the file will be fsync-ed every 32 MB of data generated. This is useful# in order to commit the file to the disk more incrementally and avoid# big latency spikes.aof-rewrite-incremental-fsync yes# When redis saves RDB file, if the following option is enabled# the file will be fsync-ed every 32 MB of data generated. This is useful# in order to commit the file to the disk more incrementally and avoid# big latency spikes.rdb-save-incremental-fsync yes# Redis LFU eviction (see maxmemory setting) can be tuned. However it is a good# idea to start with the default settings and only change them after investigating# how to improve the performances and how the keys LFU change over time, which# is possible to inspect via the OBJECT FREQ command.## There are two tunable parameters in the Redis LFU implementation: the# counter logarithm factor and the counter decay time. It is important to# understand what the two parameters mean before changing them.## The LFU counter is just 8 bits per key, it's maximum value is 255, so Redis# uses a probabilistic increment with logarithmic behavior. Given the value# of the old counter, when a key is accessed, the counter is incremented in# this way:## 1. A random number R between 0 and 1 is extracted.# 2. A probability P is calculated as 1/(old_value*lfu_log_factor+1).# 3. The counter is incremented only if R < P.## The default lfu-log-factor is 10. This is a table of how the frequency# counter changes with a different number of accesses with different# logarithmic factors:## +--------+------------+------------+------------+------------+------------+# | factor | 100 hits   | 1000 hits  | 100K hits  | 1M hits    | 10M hits   |# +--------+------------+------------+------------+------------+------------+# | 0      | 104        | 255        | 255        | 255        | 255        |# +--------+------------+------------+------------+------------+------------+# | 1      | 18         | 49         | 255        | 255        | 255        |# +--------+------------+------------+------------+------------+------------+# | 10     | 10         | 18         | 142        | 255        | 255        |# +--------+------------+------------+------------+------------+------------+# | 100    | 8          | 11         | 49         | 143        | 255        |# +--------+------------+------------+------------+------------+------------+## NOTE: The above table was obtained by running the following commands:##   redis-benchmark -n 1000000 incr foo#   redis-cli object freq foo## NOTE 2: The counter initial value is 5 in order to give new objects a chance# to accumulate hits.## The counter decay time is the time, in minutes, that must elapse in order# for the key counter to be divided by two (or decremented if it has a value# less <= 10).## The default value for the lfu-decay-time is 1. A Special value of 0 means to# decay the counter every time it happens to be scanned.## lfu-log-factor 10# lfu-decay-time 1########################### ACTIVE DEFRAGMENTATION ######################### What is active defragmentation?# -------------------------------## Active (online) defragmentation allows a Redis server to compact the# spaces left between small allocations and deallocations of data in memory,# thus allowing to reclaim back memory.## Fragmentation is a natural process that happens with every allocator (but# less so with Jemalloc, fortunately) and certain workloads. Normally a server# restart is needed in order to lower the fragmentation, or at least to flush# away all the data and create it again. However thanks to this feature# implemented by Oran Agra for Redis 4.0 this process can happen at runtime# in an "hot" way, while the server is running.## Basically when the fragmentation is over a certain level (see the# configuration options below) Redis will start to create new copies of the# values in contiguous memory regions by exploiting certain specific Jemalloc# features (in order to understand if an allocation is causing fragmentation# and to allocate it in a better place), and at the same time, will release the# old copies of the data. This process, repeated incrementally for all the keys# will cause the fragmentation to drop back to normal values.## Important things to understand:## 1. This feature is disabled by default, and only works if you compiled Redis#    to use the copy of Jemalloc we ship with the source code of Redis.#    This is the default with Linux builds.## 2. You never need to enable this feature if you don't have fragmentation#    issues.## 3. Once you experience fragmentation, you can enable this feature when#    needed with the command "CONFIG SET activedefrag yes".## The configuration parameters are able to fine tune the behavior of the# defragmentation process. If you are not sure about what they mean it is# a good idea to leave the defaults untouched.# Enabled active defragmentation# activedefrag no# Minimum amount of fragmentation waste to start active defrag# active-defrag-ignore-bytes 100mb# Minimum percentage of fragmentation to start active defrag# active-defrag-threshold-lower 10# Maximum percentage of fragmentation at which we use maximum effort# active-defrag-threshold-upper 100# Minimal effort for defrag in CPU percentage, to be used when the lower# threshold is reached# active-defrag-cycle-min 1# Maximal effort for defrag in CPU percentage, to be used when the upper# threshold is reached# active-defrag-cycle-max 25# Maximum number of set/hash/zset/list fields that will be processed from# the main dictionary scan# active-defrag-max-scan-fields 1000# Jemalloc background thread for purging will be enabled by defaultjemalloc-bg-thread yes# It is possible to pin different threads and processes of Redis to specific# CPUs in your system, in order to maximize the performances of the server.# This is useful both in order to pin different Redis threads in different# CPUs, but also in order to make sure that multiple Redis instances running# in the same host will be pinned to different CPUs.## Normally you can do this using the "taskset" command, however it is also# possible to this via Redis configuration directly, both in Linux and FreeBSD.## You can pin the server/IO threads, bio threads, aof rewrite child process, and# the bgsave child process. The syntax to specify the cpu list is the same as# the taskset command:## Set redis server/io threads to cpu affinity 0,2,4,6:# server_cpulist 0-7:2## Set bio threads to cpu affinity 1,3:# bio_cpulist 1,3## Set aof rewrite child process to cpu affinity 8,9,10,11:# aof_rewrite_cpulist 8-11## Set bgsave child process to cpu affinity 1,10,11# bgsave_cpulist 1,10-11

-v /data/redis/data:/data
-v /data/redis/conf/redis.conf:/etc/redis/redis/conf

docker run -p6379:6379 --name redis \
-v /data/redis/data:/data \
-v /data/redis/conf/redis.conf:/etc/redis/redis.conf \
-d redis redis-server /etc/redis/redis.conf

docker exec -it redis redis-cli

# 重启--name redis的容器docker restart redis
# 设置redis的容器自动开机docker update redis --restart=always
# 也可以在命令行中指定密码docker exec -it redis redis-cli -a root

Warning: Using a password with '-a' or '-u' option on the command line interface may not be safe.