背景
对于商业数据库来说，备份的功能一般都非常的全面。
比如Oracle，它的备份工具rman是非常强大的，很多年前就已经支持全量、增量、归档的备份模式，支持压缩等。
还支持元数据存储到数据库中，管理也非常的方便，例如保留多少归档，备份集的管理也很方便，例如要恢复到什么时间点，将此前的备份清除等等。
对于开源数据库来说，支持向商业版本这么丰富功能的比较少，PostgreSQL算是非常完善的一个。
PostgreSQL作为最高级的开源数据库，备份方面已经向商业数据库看齐。
目前PostgreSQL已经支持类似Oracle的rman备份工具的功能，支持全量、增量、归档三种备份模式，支持压缩，支持备份集的管理等。
有了块级增量备份，对于那种非常庞大的数据库，备份起来就不像只支持全量和归档的模式那么吃力了。
PostgreSQL增量备份是怎么做到的呢？
一个数据页的框架如下
* +----------------+---------------------------------+
* | PageHeaderData | linp1 linp2 linp3 ... |
* +-----------+----+---------------------------------+
* | ... linpN | |
* +-----------+--------------------------------------+
* | ^ pd_lower |
* | |
* | v pd_upper |
* +-------------+------------------------------------+
* | | tupleN ... |
* +-------------+------------------+-----------------+
* | ... tuple3 tuple2 tuple1 | "special space" |
* +--------------------------------+-----------------+
数据页头部的数据结构
typedef struct PageHeaderData
{
/* XXX LSN is member of *any* block, not only page-organized ones */
PageXLogRecPtr pd_lsn; /* LSN: next byte after last byte of xlog
* record for last change to this page */
uint16 pd_checksum; /* checksum */
uint16 pd_flags; /* flag bits, see below */
LocationIndex pd_lower; /* offset to start of free space */
LocationIndex pd_upper; /* offset to end of free space */
LocationIndex pd_special; /* offset to start of special space */
uint16 pd_pagesize_version;
TransactionId pd_prune_xid; /* oldest prunable XID, or zero if none */
ItemIdData pd_linp[FLEXIBLE_ARRAY_MEMBER]; /* line pointer array */
} PageHeaderData;
因为如果对象是持久化的，那么它的所有变更都会记录REDO，数据页头部的pd_lsn表示该数据页最后一次变化时，变化产生的REDO在xlog file中的结束位置.
即如果xlog flush的xlog地址位 大于或等于 此页pd_lsn，那么这个页的更改就可以认为是可靠的。
* pd_lsn - identifies xlog record for last change to this page.
* pd_checksum - page checksum, if set.
* pd_flags - flag bits.
* pd_lower - offset to start of free space.
* pd_upper - offset to end of free space.
* pd_special - offset to start of special space.
* pd_pagesize_version - size in bytes and page layout version number.
* pd_prune_xid - oldest XID among potentially prunable tuples on page.
好了，既然每次块的变化都包含了LSN的修改，那么也即是说，我们可以通过第一次备份开始时的全局LSN，以及当前需要备份的数据的page LSN来判断此页是否发生过修改。
如果修改了就备份，没修改，就不需要备份， 从而实现数据库的块级增量备份。
pg_rman 介绍
pg_rman是一个开源的PostgreSQL备份管理软件，类似Oracle的RMAN。
documentation见
pg_rman使用的是pg_start_backup(), copy, pg_stop_backup()的备份模式。
pg_rman跑的不是流复制协议，而是文件拷贝，所以pg_rman必须和数据库节点跑在一起。
如果在standby节点跑pg_rman，pg_rman则需要通过网络连接到主节点执行pg_start_backup和pg_stop_backup。
pg_rman的用法非常简单，支持以下几种运行模式。
| init | Initialize a backup catalog. |
| backup | Take an online backup. |
| restore | Do restore. |
| show | Show backup history. The detail option shows with additional information of each backups. |
| validate | Validate backup files. Backups without validation cannot be used for restore and incremental backup. |
| delete | Delete backup files. |
| purge | Remove deleted backups from backup catalog. |
使用pg_rman的前提
开启归档
配置csvlog
建议的配置
postgres=# show log_destination ;
log_destination
-----------------
csvlog
(1 row)
postgres=# SHOW log_directory ;
log_directory
---------------
pg_log
(1 row)
postgres=# SHOW archive_command ;
archive_command
--------------------------------------------
cp %p /data04/digoal/arc_log/%f
(1 row)
初始化pg_rman backup catalog
首先需要初始化一个backup catalog，实际上就是需要一个目录，这个目录将用于存放备份的文件。
同时这个目录也会存放一些元数据，例如备份的配置文件，数据库的systemid，时间线文件历史等等。
初始化命令需要两个参数，分别为备份目标目录，以及数据库的$PGDATA
$ mkdir /data05/digoal/pgbbk
$ /home/digoal/pgsql9.5/bin/pg_rman init -B /data05/digoal/pgbbk -D /data04/digoal/pg_root
INFO: ARCLOG_PATH is set to '/data04/digoal/arc_log'
INFO: SRVLOG_PATH is set to '/data04/digoal/pg_root/pg_log'
生成备份元数据如下
[digoal@iZ28tqoemgtZ ~]$ cd /data05/digoal/pgbbk/
[digoal@iZ28tqoemgtZ pgbbk]$ ll
total 16
drwx------ 4 digoal digoal 4096 Aug 26 19:29 backup
-rw-rw-r-- 1 digoal digoal 82 Aug 26 19:29 pg_rman.ini
-rw-rw-r-- 1 digoal digoal 40 Aug 26 19:29 system_identifier
drwx------ 2 digoal digoal 4096 Aug 26 19:29 timeline_history
生成的配置文件
$ cat pg_rman.ini
ARCLOG_PATH='/data04/digoal/arc_log'
SRVLOG_PATH='/data04/digoal/pg_root/pg_log'
你可以把将来要使用的配置写在这个配置文件中，或者写在pg_rman的命令行中。
我后面的测试会直接使用命令行参数。
生成的数据库system id，用于区分备份的数据库是不是一个数据库，防止被冲。
$ cat system_identifier
SYSTEM_IDENTIFIER='6318621837015461309'
与控制文件中存储的system id一致。
注意
pg_rman只从postgresql.conf取log_directory和archive_command参数的值。
如果你的PostgreSQL的配置文件是include的或者配置在postgresql.auto.conf中，这两个值将不准确。
所以建议你仅仅把参数配置在postgresql.conf中，而不要使用其他配置文件。
pg_rman 命令行用法
pg_rman manage backup/recovery of PostgreSQL database.
Usage:
pg_rman OPTION init
pg_rman OPTION backup
pg_rman OPTION restore
pg_rman OPTION show [DATE]
pg_rman OPTION show detail [DATE]
pg_rman OPTION validate [DATE]
pg_rman OPTION delete DATE
pg_rman OPTION purge
Common Options:
-D, --pgdata=PATH location of the database storage area
-A, --arclog-path=PATH location of archive WAL storage area
-S, --srvlog-path=PATH location of server log storage area
-B, --backup-path=PATH location of the backup storage area
-c, --check show what would have been done
-v, --verbose show what detail messages
-P, --progress show progress of processed files
Backup options:
-b, --backup-mode=MODE full, incremental, or archive
-s, --with-serverlog also backup server log files
-Z, --compress-data compress data backup with zlib
-C, --smooth-checkpoint do smooth checkpoint before backup
-F, --full-backup-on-error switch to full backup mode
if pg_rman cannot find validate full backup
on current timeline
NOTE: this option is only used in --backup-mode=incremental or archive.
--keep-data-generations=NUM keep NUM generations of full data backup
--keep-data-days=NUM keep enough data backup to recover to N days ago
--keep-arclog-files=NUM keep NUM of archived WAL
--keep-arclog-days=DAY keep archived WAL modified in DAY days
--keep-srvlog-files=NUM keep NUM of serverlogs
--keep-srvlog-days=DAY keep serverlog modified in DAY days
--standby-host=HOSTNAME standby host when taking backup from standby
--standby-port=PORT standby port when taking backup from standby
Restore options:
--recovery-target-time time stamp up to which recovery will proceed
--recovery-target-xid transaction ID up to which recovery will proceed
--recovery-target-inclusive whether we stop just after the recovery target
--recovery-target-timeline recovering into a particular timeline
--hard-copy copying archivelog not symbolic link
Catalog options:
-a, --show-all show deleted backup too
Delete options:
-f, --force forcibly delete backup older than given DATE
Connection options:
-d, --dbname=DBNAME database to connect
-h, --host=HOSTNAME database server host or socket directory
-p, --port=PORT database server port
-U, --username=USERNAME user name to connect as
-w, --no-password never prompt for password
-W, --password force password prompt
Generic options:
-q, --quiet don't show any INFO or DEBUG messages
--debug show DEBUG messages
--help show this help, then exit
--version output version information, then exit
Read the website for details. <http://github.com/ossc-db/pg_rman>
Report bugs to <http://github.com/ossc-db/pg_rman/issues>.
全量备份
输入必要的参数或option
$ export PGPASSWORD=postgres
$ /home/digoal/pgsql9.5/bin/pg_rman backup \
-B /data05/digoal/pgbbk \
-D /data04/digoal/pg_root \
-b full \
-s \
-Z \
-C \
--keep-data-days=10 \
--keep-arclog-files=15 \
--keep-arclog-days=10 \
--keep-srvlog-files=10 \
--keep-srvlog-days=15 \
-h 127.0.0.1 -p 1921 -U postgres -d postgres
结果
INFO: copying database files
NOTICE: pg_stop_backup complete, all required WAL segments have been archived
INFO: copying archived WAL files
INFO: copying server log files
INFO: backup complete
HINT: Please execute 'pg_rman validate' to verify the files are correctly copied.
INFO: start deleting old archived WAL files from ARCLOG_PATH (keep files = 15, keep days = 10)
INFO: the threshold timestamp calculated by keep days is "2016-08-16 00:00:00"
INFO: start deleting old server files from SRVLOG_PATH (keep files = 10, keep days = 15)
INFO: the threshold timestamp calculated by keep days is "2016-08-11 00:00:00"
INFO: start deleting old backup (keep after = 2016-08-16 00:00:00)
INFO: does not include the backup just taken
WARNING: backup "2016-08-26 19:39:32" is not taken int account
DETAIL: This is not valid backup.
校验备份集
备份时pg_rman会记录每个备份文件的crc，以便validate进行校验。
例如某个备份集
$ less /data05/digoal/pgbbk/20160826/195809/file_database.txt
.s.PGSQL.1921 ? 0 0 0777 2016-08-26 19:27:05
.s.PGSQL.1921.lock f 55 590164837 0600 2016-08-26 19:27:05
PG_VERSION f 12 3872055064 0600 2016-07-28 10:03:42
backup_label f 167 2985542389 0600 2016-08-26 19:58:42
backup_label.old f 155 4273989468 0600 2016-08-23 19:43:32
base d 0 0 0700 2016-08-23 10:28:32
base/1 d 0 0 0700 2016-08-24 16:17:02
base/1/112 f 57 1147028285 0600 2016-07-28 10:03:42
base/1/113 f 57 1147028285 0600 2016-07-28 10:03:42
base/1/1247 F 8178 1875285513 0600 2016-07-29 13:51:29
base/1/1247_fsm f 139 3668812536 0600 2016-07-28 10:03:43
解释:
路径，文件类型，大小，CRC校验值，权限，时间，第四列即crc校验值
每次备份完，必须要做一次校验，否则备份集不可用用来恢复，增量备份时也不会用它来做增量比较。
$ /home/digoal/pgsql9.5/bin/pg_rman validate -B /data05/digoal/pgbbk
INFO: validate: "2016-08-26 19:39:50" backup, archive log files and server log files by CRC
INFO: backup "2016-08-26 19:39:50" is valid
每个备份集都包含了一个备份状态文件，如下
cat /data05/digoal/pgbbk/20160826/201955/backup.ini
# configuration
BACKUP_MODE=INCREMENTAL
FULL_BACKUP_ON_ERROR=false
WITH_SERVERLOG=true
COMPRESS_DATA=true
# result
TIMELINEID=1
START_LSN=46/df000108
STOP_LSN=46/df000210
START_TIME='2016-08-26 20:19:55'
END_TIME='2016-08-26 20:20:48'
RECOVERY_XID=3896508593
RECOVERY_TIME='2016-08-26 20:20:47'
TOTAL_DATA_BYTES=6196524307
READ_DATA_BYTES=3199287520
READ_ARCLOG_BYTES=33554754
READ_SRVLOG_BYTES=0
WRITE_BYTES=125955
BLOCK_SIZE=8192
XLOG_BLOCK_SIZE=8192
STATUS=OK
这个文件中包含了很重要的信息，比如LSN，后面LSN将用于比对增量备份时对比数据块的LSN是否发生了变化，是否需要备份。
增量备份
$ export PGPASSWORD=postgres
$ /home/digoal/pgsql9.5/bin/pg_rman backup \
-B /data05/digoal/pgbbk \
-D /data04/digoal/pg_root \
-b incremental \
-s \
-Z \
-C \
--keep-data-days=10 \
--keep-arclog-files=15 \
--keep-arclog-days=10 \
--keep-srvlog-files=10 \
--keep-srvlog-days=15 \
-h 127.0.0.1 -p 1921 -U postgres -d postgres
增量备份输出
INFO: copying database files
NOTICE: pg_stop_backup complete, all required WAL segments have been archived
INFO: copying archived WAL files
INFO: copying server log files
INFO: backup complete
HINT: Please execute 'pg_rman validate' to verify the files are correctly copied.
INFO: start deleting old archived WAL files from ARCLOG_PATH (keep files = 15, keep days = 10)
INFO: the threshold timestamp calculated by keep days is "2016-08-16 00:00:00"
INFO: start deleting old server files from SRVLOG_PATH (keep files = 10, keep days = 15)
INFO: the threshold timestamp calculated by keep days is "2016-08-11 00:00:00"
INFO: start deleting old backup (keep after = 2016-08-16 00:00:00)
INFO: does not include the backup just taken
INFO: backup "2016-08-26 19:39:50" should be kept
DETAIL: This is taken after "2016-08-16 00:00:00".
WARNING: backup "2016-08-26 19:39:32" is not taken int account
DETAIL: This is not valid backup.
校验备份集
$ /home/digoal/pgsql9.5/bin/pg_rman validate -B /data05/digoal/pgbbk
INFO: validate: "2016-08-26 19:43:20" backup, archive log files and server log files by CRC
INFO: backup "2016-08-26 19:43:20" is valid
列出备份集
$ /home/digoal/pgsql9.5/bin/pg_rman show -B /data05/digoal/pgbbk
==========================================================
StartTime Mode Duration Size TLI Status
==========================================================
2016-08-26 19:43:20 INCR 0m 54kB 1 OK
2016-08-26 19:39:50 FULL 1m 245MB 1 OK
可以看到增量非常小，因为很少变化的块。
接下来更新一张大表的某一条记录，再看看。
postgres=# \dt+
List of relations
Schema | Name | Type | Owner | Size | Description
--------+----------+-------+----------+---------+-------------
public | hll_test | table | postgres | 208 kB |
public | t | table | postgres | 3050 MB |
public | tbl1 | table | postgres | 226 MB |
public | tbl2 | table | postgres | 63 MB |
public | test | table | postgres | 120 MB |
(5 rows)
postgres=# with t1 as (select id from t where id between 1 and 1000 limit 10) update t set info='new' where id in (select * from t1);
UPDATE 10
更新后做一个增量备份
$ /home/digoal/pgsql9.5/bin/pg_rman backup -B /data05/digoal/pgbbk -D /data04/digoal/pg_root -b incremental -s -Z -C --keep-data-days=10 --keep-arclog-files=15 --keep-arclog-days=10 --keep-srvlog-files=10 --keep-srvlog-days=15 -h 127.0.0.1 -p 1921 -U postgres -d postgres
INFO: copying database files
NOTICE: pg_stop_backup complete, all required WAL segments have been archived
INFO: copying archived WAL files
INFO: copying server log files
INFO: backup complete
HINT: Please execute 'pg_rman validate' to verify the files are correctly copied.
INFO: start deleting old archived WAL files from ARCLOG_PATH (keep files = 15, keep days = 10)
INFO: the threshold timestamp calculated by keep days is "2016-08-16 00:00:00"
INFO: start deleting old server files from SRVLOG_PATH (keep files = 10, keep days = 15)
INFO: the threshold timestamp calculated by keep days is "2016-08-11 00:00:00"
INFO: start deleting old backup (keep after = 2016-08-16 00:00:00)
INFO: does not include the backup just taken
INFO: backup "2016-08-26 19:58:09" should be kept
DETAIL: This is taken after "2016-08-16 00:00:00".
WARNING: backup "2016-08-26 19:56:54" is not taken int account
DETAIL: This is not valid backup.
INFO: backup "2016-08-26 19:43:20" should be kept
DETAIL: This is taken after "2016-08-16 00:00:00".
INFO: backup "2016-08-26 19:39:50" should be kept
DETAIL: This is taken after "2016-08-16 00:00:00".
WARNING: backup "2016-08-26 19:39:32" is not taken int account
DETAIL: This is not valid backup.
校验备份集
[digoal@iZ28tqoemgtZ pg_rman]$ /home/digoal/pgsql9.5/bin/pg_rman validate -B /data05/digoal/pgbbk
INFO: validate: "2016-08-26 20:19:55" backup, archive log files and server log files by CRC
INFO: backup "2016-08-26 20:19:55" is valid
输出当前备份
[digoal@iZ28tqoemgtZ pg_rman]$ /home/digoal/pgsql9.5/bin/pg_rman show -B /data05/digoal/pgbbk
==========================================================
StartTime Mode Duration Size TLI Status
==========================================================
2016-08-26 20:19:55 INCR 0m 125kB 1 OK
2016-08-26 19:58:09 FULL 11m 3094MB 1 OK
2016-08-26 19:56:54 FULL 1m 0B 0 ERROR
2016-08-26 19:43:20 INCR 0m 54kB 1 OK
2016-08-26 19:39:50 FULL 1m 245MB 1 OK
2016-08-26 19:39:32 FULL 0m 0B 0 ERROR
增量备份的文件非常小，因为变化的数据块很少。
按指定时间从catalog删除备份集
例如我只需要我的备份集能恢复到2016-08-26 19:59:00，在这个时间点以前，不需要用来恢复到这个时间点的备份全删掉。
$ /home/digoal/pgsql9.5/bin/pg_rman delete "2016-08-26 19:59:00" -B /data05/digoal/pgbbk
WARNING: cannot delete backup with start time "2016-08-26 19:58:09"
DETAIL: This is the latest full backup necessary for successful recovery.
INFO: delete the backup with start time: "2016-08-26 19:56:54"
INFO: delete the backup with start time: "2016-08-26 19:43:20"
INFO: delete the backup with start time: "2016-08-26 19:39:50"
INFO: delete the backup with start time: "2016-08-26 19:39:32"
保留的备份集合可以将数据库恢复到2016-08-26 19:59:00
$ /home/digoal/pgsql9.5/bin/pg_rman show -B /data05/digoal/pgbbk
==========================================================
StartTime Mode Duration Size TLI Status
==========================================================
2016-08-26 20:19:55 INCR 0m 125kB 1 OK
2016-08-26 19:58:09 FULL 11m 3094MB 1 OK
物理删除已从catalog删除的备份集
$ /home/digoal/pgsql9.5/bin/pg_rman purge -B /data05/digoal/pgbbk
INFO: DELETED backup "2016-08-26 19:56:54" is purged
INFO: DELETED backup "2016-08-26 19:43:20" is purged
INFO: DELETED backup "2016-08-26 19:39:50" is purged
INFO: DELETED backup "2016-08-26 19:39:32" is purged
恢复
pg_rman数据恢复时的两个必要要素
1. 新的$PGDATA
2. 备份目录
命令的选项也很简单，甚至可以不指定任何option
Restore options:
The parameters which are started with –recovery are same as parameters in recovery.conf. See also “Recovery Configuration” for details.
接下来的几个配置，与recovery.conf的意思对齐。
如果不指定时间线，则使用$PGDATA/global/pg_control，如果没有$PGDATA/global/pg_control，则使用最新的全量备份集的时间线。
--recovery-target-timeline TIMELINE
Specifies recovering into a particular timeline. If not specified, the current timeline from ($PGDATA/global/pg_control) is used.
如果不指定，则恢复到最新时间
--recovery-target-time TIMESTAMP
This parameter specifies the time stamp up to which recovery will proceed. If not specified, continue recovery to the latest time.
如果不指定，则恢复到最新xid
--recovery-target-xid XID
This parameter specifies the transaction ID up to which recovery will proceed. If not specified, continue recovery to the latest xid.
如果不指定，则默认使用true，即恢复到包含恢复目标XID的commit record为止，或者第一笔commit record ts>指定ts的 commit redo record为止；
如果是false则不apply恢复目标XID的commit record，或者不apply第一笔commit record ts>=指定ts的 commit redo record。
--recovery-target-inclusive
Specifies whether we stop just after the specified recovery target (true), or just before the recovery target (false). Default is true.
是否使用硬链接复制archive log，而不需要拷贝文件
The following parameter determines the behavior of restore.
--hard-copy
The archive WAL are copied to archive WAL storage area. If not specified, pg_rman makes symbolic link to archive WAL where are in the backup catalog directory.
例子
恢复时，需要注意，你可以选择原地恢复（覆盖式），或者使用新的$PGDATA作为恢复目标。
但是请注意，不管是哪种恢复方式，如果在本机恢复的话，pg_rman可能会覆盖原有的数据文件，arch, pg_xlog目录中的文件，所以，如果你要保留原数据，建议先将原数据目录重命名。
1. 原地恢复
2. 使用新的$PGDATA恢复
在本机恢复的例子
1. 停库
pg_ctl stop -m fast -D /data04/digoal/pg_root_1922
2. 重命名原数据相关目录
$PGDATA
mv /data04/digoal/pg_root_1922 /data04/digoal/old_pg_root_1922
PG_XLOG
mv /data05/digoal/pg_xlog_1922 /data05/digoal/old_pg_xlog_1922
表空间
mv /data02/digoal/tbs1_1922 /data02/digoal/old_tbs1_1922
归档目录，除了要重命名，还需要新建一个原目录
mv /data04/digoal/arc_log1922 /data04/digoal/old_arc_log1922
mkdir /data04/digoal/arc_log1922
...
3. pg_rman restore
pg_rman restore -B /data05/digoal/pgstdbak -D /data04/digoal/pg_restore_root
WARNING: could not open pg_controldata file "/data04/digoal/pg_restore_root/global/pg_control": No such file or directory
WARNING: could not open pg_controldata file "/data04/digoal/pg_restore_root/global/pg_control": No such file or directory
INFO: the recovery target timeline ID is not given
INFO: use timeline ID of latest full backup as recovery target: 1
INFO: calculating timeline branches to be used to recovery target point
INFO: searching latest full backup which can be used as restore start point
INFO: found the full backup can be used as base in recovery: "2016-08-29 15:05:32"
INFO: copying online WAL files and server log files
INFO: clearing restore destination
INFO: validate: "2016-08-29 15:05:32" backup, archive log files and server log files by SIZE
INFO: backup "2016-08-29 15:05:32" is valid
INFO: restoring database files from the full mode backup "2016-08-29 15:05:32"
INFO: searching incremental backup to be restored
INFO: validate: "2016-08-29 15:13:10" backup, archive log files and server log files by SIZE
INFO: backup "2016-08-29 15:13:10" is valid
INFO: restoring database files from the incremental mode backup "2016-08-29 15:13:10"
INFO: searching backup which contained archived WAL files to be restored
INFO: backup "2016-08-29 15:13:10" is valid
INFO: restoring WAL files from backup "2016-08-29 15:13:10"
INFO: restoring online WAL files and server log files
INFO: generating recovery.conf
INFO: restore complete
HINT: Recovery will start automatically when the PostgreSQL server is started.
4. 修改postgresql.conf, recovery.conf
根据实际情况调整，本例不修改
cd /data04/digoal/pg_restore_root/
digoal@iZ28tqoemgtZ-> ll
total 124K
-rw------- 1 digoal digoal 193 Aug 29 17:05 backup_label.old
drwx------ 7 digoal digoal 4.0K Aug 29 17:05 base
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 global
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_clog
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_commit_ts
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_dynshmem
-rw------- 1 digoal digoal 4.4K Aug 29 17:05 pg_hba.conf
-rw------- 1 digoal digoal 1.6K Aug 29 17:05 pg_ident.conf
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_log
drwx------ 4 digoal digoal 4.0K Aug 29 17:05 pg_logical
drwx------ 4 digoal digoal 4.0K Aug 29 17:05 pg_multixact
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_notify
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_replslot
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_serial
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_snapshots
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_stat
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_stat_tmp
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_subtrans
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_tblspc
drwx------ 2 digoal digoal 4.0K Aug 29 17:05 pg_twophase
-rw------- 1 digoal digoal 4 Aug 29 17:05 PG_VERSION
lrwxrwxrwx 1 digoal digoal 27 Aug 29 17:05 pg_xlog -> /data05/digoal/pg_xlog_1922
-rw------- 1 digoal digoal 88 Aug 29 17:05 postgresql.auto.conf
-rw------- 1 digoal digoal 22K Aug 29 17:05 postgresql.conf
-rw------- 1 digoal digoal 44 Aug 29 17:05 postmaster.opts
-rw-r--r-- 1 digoal digoal 130 Aug 29 17:06 recovery.conf
digoal@iZ28tqoemgtZ-> cd pg_tblspc/
digoal@iZ28tqoemgtZ-> ll
total 0
lrwxrwxrwx 1 digoal digoal 24 Aug 29 17:05 16719 -> /data02/digoal/tbs1_1922
cd ..
vi postgresql.conf
archive_command = 'cp %p /data04/digoal/arc_log1922/%f'
vi recovery.conf
# recovery.conf generated by pg_rman 1.3.2
restore_command = 'cp /data04/digoal/arc_log1922/%f %p'
recovery_target_timeline = '1'
5. 如果备份集的时间线发生了变化，需要先手工拷贝到归档目录，再执行restore
digoal@iZ28tqoemgtZ-> pg_rman restore -B /data05/digoal/pgstdbak -D /data04/digoal/pg_restore_root
WARNING: could not open pg_controldata file "/data04/digoal/pg_restore_root/global/pg_control": No such file or directory
WARNING: could not open pg_controldata file "/data04/digoal/pg_restore_root/global/pg_control": No such file or directory
INFO: the recovery target timeline ID is not given
INFO: use timeline ID of latest full backup as recovery target: 2
INFO: calculating timeline branches to be used to recovery target point
ERROR: could not open destination file "/data04/digoal/arc_log1922/00000002.history": No such file or directory
digoal@iZ28tqoemgtZ-> mkdir /data04/digoal/arc_log1922
digoal@iZ28tqoemgtZ-> cp /data05/digoal/pgstdbak/timeline_history/00000002.history /data04/digoal/arc_log1922/
digoal@iZ28tqoemgtZ-> pg_rman restore -B /data05/digoal/pgstdbak -D /data04/digoal/pg_restore_root
WARNING: could not open pg_controldata file "/data04/digoal/pg_restore_root/global/pg_control": No such file or directory
WARNING: could not open pg_controldata file "/data04/digoal/pg_restore_root/global/pg_control": No such file or directory
INFO: the recovery target timeline ID is not given
INFO: use timeline ID of latest full backup as recovery target: 2
INFO: calculating timeline branches to be used to recovery target point
INFO: searching latest full backup which can be used as restore start point
INFO: found the full backup can be used as base in recovery: "2016-08-29 17:14:20"
INFO: copying online WAL files and server log files
INFO: clearing restore destination
INFO: validate: "2016-08-29 17:14:20" backup and archive log files by SIZE
INFO: backup "2016-08-29 17:14:20" is valid
INFO: restoring database files from the full mode backup "2016-08-29 17:14:20"
INFO: searching incremental backup to be restored
INFO: searching backup which contained archived WAL files to be restored
INFO: backup "2016-08-29 17:14:20" is valid
INFO: restoring WAL files from backup "2016-08-29 17:14:20"
INFO: restoring online WAL files and server log files
INFO: generating recovery.conf
INFO: restore complete
HINT: Recovery will start automatically when the PostgreSQL server is started.
digoal@iZ28tqoemgtZ-> cd /data04/digoal/arc_log1922
digoal@iZ28tqoemgtZ-> ll
total 16K
lrwxrwxrwx 1 digoal digoal 71 Aug 29 17:18 00000002000000470000000C -> /data05/digoal/pgstdbak/20160829/171420/arclog/00000002000000470000000C
lrwxrwxrwx 1 digoal digoal 71 Aug 29 17:18 00000002000000470000000D -> /data05/digoal/pgstdbak/20160829/171420/arclog/00000002000000470000000D
lrwxrwxrwx 1 digoal digoal 87 Aug 29 17:18 00000002000000470000000D.00000028.backup -> /data05/digoal/pgstdbak/20160829/171420/arclog/00000002000000470000000D.00000028.backup
-rw------- 1 digoal digoal 42 Aug 29 17:18 00000002.history
6. 启动恢复目标数据库
digoal@iZ28tqoemgtZ-> pg_ctl start -D /data04/digoal/pg_restore_root
server starting
digoal@iZ28tqoemgtZ-> LOG: 00000: redirecting log output to logging collector process
HINT: Future log output will appear in directory "pg_log".
LOCATION: SysLogger_Start, syslogger.c:622
digoal@iZ28tqoemgtZ-> psql -h 127.0.0.1 -p 1922
psql (9.5.3)
Type "help" for help.
postgres=# select pg_is_in_recovery();
pg_is_in_recovery
-------------------
f
(1 row)
postgres=# \l+
List of databases
Name | Owner | Encoding | Collate | Ctype | Access privileges | Size | Tablespace | Description
--------------------+----------+----------+---------+-------+-----------------------+---------+------------+--------------------------------------------
contrib_regression | postgres | UTF8 | C | C | | 7137 kB | pg_default |
db1 | postgres | UTF8 | C | C | | 111 MB | tbs1 |
postgres | postgres | UTF8 | C | C | | 797 MB | pg_default | default administrative connection database
template0 | postgres | UTF8 | C | C | =c/postgres +| 7137 kB | pg_default | unmodifiable empty database
| | | | | postgres=CTc/postgres | | |
template1 | postgres | UTF8 | C | C | =c/postgres +| 7137 kB | pg_default | default template for new databases
| | | | | postgres=CTc/postgres | | |
(5 rows)
注意事项
-
小心覆盖原有的部分
-
建议先将原有的目录重命名，或者在其他机器恢复，
-
软链接的处理，会恢复到目标，并且重新建立软链接，所以目录结构必须与备份时保持一致。
-
用户可以指定$PGDATA，恢复到新的目标目录，但是arch_log, 表空间, pg_xlog目录无法指定新的位置，所以原地还原时，必须注意这些目录可能被覆盖，先重命名是比较好的手段。
pg_rman 可以优化的地方
- 检查哪些要恢复的块与目标块的CRC是否一致，如果一致，不需要拷贝，减少WRITE。
pg_rman 软件限制
pg_rman的使用限制
pg_rman has the following restrictions.
-
Requires to read database cluster directory and write backup catalog directory.
For example, you need to mount the disk where backup catalog is placed with NFS from database server.
实际上不是必须的，如果没有指定原来的$PGDATA，则使用备份集的元数据。 -
Block sizes of pg_rman and server should be matched. BLCKSZ and XLOG_BLCKSZ also should be matched.
编译pg_rman时，最好使用启动数据集的集群软件的pg_config。 确保块大小一致。
因为需要做块的校验。 读取LSN等，都与块大小有关。 -
If there are some unreadable files/directories in database cluster directory, WAL directory or archived WAL directory, the backup or restore would be failed.
-
When taking an incremental backup, pg_rman check the timeline ID of the target database whether it is the same with the one of the full backup in backup list.
But, pg_rman does not check whether the data itself is same with the full backup in backup list.
So, you can take an incremental backup over the full backup against the database which has the same timeline ID but has different data.
从standby备份时的软件限制
Getting backup from standby-site, pg_rman has the follow restrictions too.
-
The environment of replication should be built right, or the backup will not finish.
-
You can’t get backups on master and standby at the same time.
因为pg_rman使用的是exclusive bakcup，（pg_start_backup），所以同一时间，只能跑一次pg_start_backup。
pg_basebackup则使用的是shared backup，可以跑多个。 -
You can’t get backups on multi standbys at the same time too.
道理同上 -
Basically, the backup from standby-site is used for restoring on MASTER.
pg_rman doesn’t treat the backup as restoring on standby automatically. -
If you want to restore the backup on STANDBY, you have to manage archive logs with your self.
因为备库不归档，所以从standby备份时，需要解决归档备份的问题。
我在前面的文档中已经提及，包括解决思路。
如果使用快照备份，有哪些软件限制
When using storage snapshot, pg_rman has the following restrictions too.
-
If your snapshot does not have any file update time, incremental backup is same with full backup.
-
Because pg_rman judges performing full backup or incremental backup by update time for files.
If files don’t have update time because of storage snapshot specification, pg_rman performs full backup every time. -
You can’t backup for one side works storage with split mirror snapshot.
-
Before you execute pg_rman, you should perform storage “RESYNC”.
- After pg_rman performs backup with split mirror snapshot, storeage will be “SPLITTED”(works on one side).
pg_rman perform SPLIT command for getting snapshot, but doesn’t perform RESYNC command. -
You cant’t get snapshot from different vendor storages in a time.
-
You cant’t use some vendor storages which have different commands for getting snapshot.
-
The script and commands for getting storage snapshot should be executable.
-
It’s expected to have authority of root for getting snapshot or mounting volumes.
So a user, performs pg_rman, is granted to execute any commands in the script. - If you use LVM(Logical Volume Manager), it’s needed root authority for mount, umount, lvcreate, lvremove, lvscan commands.
You should granted to these commands with sudo command to non-password executable.
pg_rman 源码浅析
- 增量备份代码
上次备份以来，数据块的LSN是否发生了变化，如果自从上次备份的start_lsn以来没有发生变化，则不备份。
代码举例
else
{
pgBackupGetPath(prev_backup, prev_file_txt, lengthof(prev_file_txt),
DATABASE_FILE_LIST);
prev_files = dir_read_file_list(pgdata, prev_file_txt);
/*
* Do backup only pages having larger LSN than previous backup.
*/
lsn = &prev_backup->start_lsn;
xlogid = (uint32) (*lsn >> 32);
xrecoff = (uint32) *lsn;
elog(DEBUG, _("backup only the page updated after LSN(%X/%08X)"),
xlogid, xrecoff);
}
...
/* backup files from non-snapshot */
pgBackupGetPath(¤t, path, lengthof(path), DATABASE_DIR);
backup_files(pgdata, path, files, prev_files, lsn, current.compress_data, NULL);
- 备份结果backup.ini相关代码
# configuration
BACKUP_MODE=FULL
FULL_BACKUP_ON_ERROR=false
WITH_SERVERLOG=true
COMPRESS_DATA=true
# result
TIMELINEID=1
START_LSN=43/d5000028
STOP_LSN=43/d5000168
START_TIME='2016-08-26 15:43:39'
END_TIME='2016-08-26 15:44:27'
RECOVERY_XID=3896508572
RECOVERY_TIME='2016-08-26 15:44:18'
TOTAL_DATA_BYTES=823571731
READ_DATA_BYTES=823571731
READ_ARCLOG_BYTES=234881668
READ_SRVLOG_BYTES=218248
WRITE_BYTES=206009921
BLOCK_SIZE=8192
XLOG_BLOCK_SIZE=8192
STATUS=OK
对应的数据结构
/*
* pg_rman takes backup into the directory $BACKUP_PATH/<date>/<time>.
*
* status == -1 indicates the pgBackup is invalid.
*/
typedef struct pgBackup
{
/* Backup Level */
BackupMode backup_mode;
bool with_serverlog;
bool compress_data;
bool full_backup_on_error;
/* Status - one of BACKUP_STATUS_xxx */
BackupStatus status;
/* Timestamp, etc. */
TimeLineID tli;
XLogRecPtr start_lsn;
XLogRecPtr stop_lsn;
time_t start_time;
time_t end_time;
time_t recovery_time;
uint32 recovery_xid;
/* Size (-1 means not-backup'ed) */
int64 total_data_bytes;
int64 read_data_bytes;
int64 read_arclog_bytes;
int64 read_srvlog_bytes;
int64 write_bytes;
/* data/wal block size for compatibility check */
uint32 block_size;
uint32 wal_block_size;
/* if backup from standby or not */
bool is_from_standby;
} pgBackup;
备份开始时记录pg_start_backup调用返回的lsn，写入backup->start_lsn
/*
* Notify start of backup to PostgreSQL server.
*/
static void
pg_start_backup(const char *label, bool smooth, pgBackup *backup)
{
PGresult *res;
const char *params[2];
params[0] = label;
elog(DEBUG, "executing pg_start_backup()");
reconnect();
/* Assumes PG version >= 8.4 */
/* 2nd argument is 'fast' (IOW, !smooth) */
params[1] = smooth ? "false" : "true";
res = execute("SELECT * from pg_xlogfile_name_offset(pg_start_backup($1, $2))", 2, params);
if (backup != NULL)
get_lsn(res, &backup->tli, &backup->start_lsn);
elog(DEBUG, "backup start point is (WAL file: %s, xrecoff: %s)",
PQgetvalue(res, 0, 0), PQgetvalue(res, 0, 1));
PQclear(res);
disconnect();
}
备份停止，调用pg_stop_backup，从返回结果中取出LSN，写入backup->stop_lsn
/*
* Notify end of backup to PostgreSQL server.
*/
static void
pg_stop_backup(pgBackup *backup)
{
elog(DEBUG, "executing pg_stop_backup()");
wait_for_archive(backup,
"SELECT * FROM pg_xlogfile_name_offset(pg_stop_backup())");
}
static void
wait_for_archive(pgBackup *backup, const char *sql)
{
PGresult *res;
char ready_path[MAXPGPATH];
int try_count;
reconnect();
res = execute(sql, 0, NULL);
if (backup != NULL)
{
get_lsn(res, &backup->tli, &backup->stop_lsn);
elog(DEBUG, "backup end point is (WAL file: %s, xrecoff: %s)",
PQgetvalue(res, 0, 0), PQgetvalue(res, 0, 1));
}
/* get filename from the result of pg_xlogfile_name_offset() */
elog(DEBUG, "waiting for %s is archived", PQgetvalue(res, 0, 0));
snprintf(ready_path, lengthof(ready_path),
"%s/pg_xlog/archive_status/%s.ready", pgdata, PQgetvalue(res, 0, 0));
PQclear(res);
res = execute(TXID_CURRENT_SQL, 0, NULL);
if(backup != NULL)
{
get_xid(res, &backup->recovery_xid);
backup->recovery_time = time(NULL);
}
disconnect();
/* wait until switched WAL is archived */
try_count = 0;
while (fileExists(ready_path))
{
sleep(1);
if (interrupted)
ereport(FATAL,
(errcode(ERROR_INTERRUPTED),
errmsg("interrupted during waiting for WAL archiving")));
try_count++;
if (try_count > TIMEOUT_ARCHIVE)
ereport(ERROR,
(errcode(ERROR_ARCHIVE_FAILED),
errmsg("switched WAL could not be archived in %d seconds",
TIMEOUT_ARCHIVE)));
}
elog(DEBUG, "WAL file contains backup end point is archived after %d seconds waiting",
try_count);
}
validate 时，改backup.ini的STATUS字段
validate.c
for (i = 0; i < parray_num(backup_list); i++)
{
pgBackup *backup = (pgBackup *)parray_get(backup_list, i);
/* clean extra backups (switch STATUS to ERROR) */
if(!another_pg_rman &&
(backup->status == BACKUP_STATUS_RUNNING ||
backup->status == BACKUP_STATUS_DELETING))
{
backup->status = BACKUP_STATUS_ERROR;
pgBackupWriteIni(backup);
}
/* Validate completed backups only. */
if (backup->status != BACKUP_STATUS_DONE)
continue;
/* validate with CRC value and update status to OK */
pgBackupValidate(backup, false, false, (HAVE_DATABASE(backup)));
}
...
/* update status to OK */
if (corrupted)
backup->status = BACKUP_STATUS_CORRUPT;
else
backup->status = BACKUP_STATUS_OK;
pgBackupWriteIni(backup);
注意
1.备份参数 -C 表示无缝checkpoint, 所以可能很慢，视checkpoint_completion_target和segment_size的配置。
如果你发现pg_rman开始很慢，可以把-C去掉，速度就快了，但是可能在高峰时，造成冲击。
建议高峰是不要备份。
2.BUG
unix socket 是$PGDATA时, validate会报错
pg_rman validate
INFO: validate: "2016-08-26 16:19:25" backup, archive log files and server log files by CRC
ERROR: invalid type '?' found in "/data05/digoal/pgbak/20160826/161925/file_database.txt"
vi /data05/digoal/pgbak/20160826/161925/file_database.txt
.s.PGSQL.1921 ? 0 0 0777 2016-08-26 15:35:05
修改一下dir.c的代码即可修复这个问题，修改如下
if (strncmp(path, ".s.PGSQL", 7) != 0 && type != 'f' && type != 'F' && type != 'd' && type != 'l')
ereport(ERROR,
(errcode(ERROR_CORRUPTED),
errmsg("invalid type '%c' found in \"%s\"", type, file_txt)));
祝大家玩得开心，欢迎随时来 阿里云促膝长谈业务需求 ，恭候光临。
阿里云的小伙伴们加油，努力 做好内核与服务，打造最贴地气的云数据库 。
