Arch对于OrangePi的影响
- 树莓派镜像中Arch，官方对其提供支持，OrangePi可没有树莓派那么的优待，只有一些喜欢真正折腾的玩家才喜欢给他支持属于自己的DIY系统.
- 今天幸运的在Arch WiKi上看见了，对OprangePi的支持，当然树莓派支持的版本是1.2.3，而OrangePi支持支持one这个型号，我手头上有一个Zero，我想搞一个Zero的Arch专属系统，所以有了这篇文章.
关于OrangePi Zero
- OrangePi Zero 是鲟龙软件有限公司含H2 +四核Cortex-A7 CPU一个新的小开发板.在此单板计算机可以运行Android官方的，Ubuntu，Debian或者Lubuntu。因为CPU是全志H3兼容，它可以运行标准Linux内核编译为这款CPU运行.推荐大家购买Zero_512M，相信不久官网就有可能放出Zero_For_Arch的镜像了.期待吧.（2017年3月17日 17:37:37此时该系统最新内核4.10.3）以下都是该系统的测试信息.
系统信息
[alarm@alarm ~]$ screenfetch
-`
.o+` alarm@alarm
`ooo/ OS: Arch Linux
`+oooo: Kernel: armv7l Linux 4.10.1-1-ARCH
`+oooooo: Uptime: 0m
-+oooooo+: Packages: 179
`/:-:++oooo+: Shell: 267
`/++++/+++++++: CPU: ARMv7 rev 5 (v7l)
`/++++++++++++++: RAM: 28MiB / 235MiB
`/+++ooooooooooooo/`
./ooosssso++osssssso+`
.oossssso-````/ossssss+`
-osssssso. :ssssssso.
:osssssss/ osssso+++.
/ossssssss/ +ssssooo/-
`/ossssso+/:- -:/+osssso+-
`+sso+:-` `.-/+oso:
`++:. `-/+/
.` `/
[alarm@alarm ~]$
串口信息
以下是为串口调试接口引脚1 GND 2 - 3 RXD - TXD。逻辑电平与3.3 V兼容TTL。串行速度为115200
U-Boot SPL 2016.09.01 (Jan 31 2017 - 15:09:08)
DRAM: 512 MiB
Trying to boot from MMC1
U-Boot 2016.09.01 (Jan 31 2017 - 15:09:08 +0100) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi One
DRAM: 512 MiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: phy interface0
eth0: ethernet@1c30000
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
805 bytes read in 114 ms (6.8 KiB/s)
## Executing script at 43100000
5652208 bytes read in 565 ms (9.5 MiB/s)
17316 bytes read in 2596 ms (5.9 KiB/s)
** File not found /boot/initramfs-linux.img **
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Device Tree to 49ff8000, end 49fff3a3 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.6-1-ARCH (builduser@leming) (gcc version 6.3.1 20170109 (GCC) ) #1 SMP Thu Jan 26 20:34:49 MST 2017
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Xunlong Orange Pi One
[ 0.000000] cma: Reserved 48 MiB at 0x5c800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] percpu: Embedded 14 pages/cpu @dfae8000 s26828 r8192 d22324 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920
[ 0.000000] Kernel command line: console=ttyS0,115200 root=PARTUUID=f3d167a8-01 rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 450492K/524288K available (11264K kernel code, 946K rwdata, 4528K rodata, 1024K init, 840K bss, 24644K reserved, 49152K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0c00000 (12256 kB)
[ 0.000000] .init : 0xc1100000 - 0xc1200000 (1024 kB)
[ 0.000000] .data : 0xc1200000 - 0xc12ec8a8 ( 947 kB)
[ 0.000000] .bss : 0xc12ee000 - 0xc13c01f8 ( 841 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000016] Switching to timer-based delay loop, resolution 41ns
[ 0.000561] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.001129] Console: colour dummy device 80x30
[ 0.001162] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.001174] pid_max: default: 32768 minimum: 301
[ 0.001351] Security Framework initialized
[ 0.001512] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001522] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.002311] CPU: Testing write buffer coherency: ok
[ 0.002649] /cpus/cpu@0 missing clock-frequency property
[ 0.002665] /cpus/cpu@1 missing clock-frequency property
[ 0.002677] /cpus/cpu@2 missing clock-frequency property
[ 0.002689] /cpus/cpu@3 missing clock-frequency property
[ 0.002700] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.002729] Setting up static identity map for 0x40100000 - 0x40100098
[ 0.015322] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.026122] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.036865] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.036940] Brought up 4 CPUs
[ 0.036963] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.036969] CPU: All CPU(s) started in HYP mode.
[ 0.036974] CPU: Virtualization extensions available.
[ 0.037834] devtmpfs: initialized
[ 0.042546] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.042853] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.044476] xor: measuring software checksum speed
[ 0.136750] arm4regs : 1263.200 MB/sec
[ 0.236808] 8regs : 877.200 MB/sec
[ 0.336873] 32regs : 808.400 MB/sec
[ 0.436935] neon : 1287.600 MB/sec
[ 0.436943] xor: using function: neon (1287.600 MB/sec)
[ 0.437080] pinctrl core: initialized pinctrl subsystem
[ 0.438353] NET: Registered protocol family 16
[ 0.439869] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.495544] cpuidle: using governor menu
[ 0.495960] No ATAGs?
[ 0.495986] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.495994] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.496632] Serial: AMBA PL011 UART driver
[ 0.697323] raid6: int32x1 gen() 180 MB/s
[ 0.867247] raid6: int32x1 xor() 165 MB/s
[ 1.037371] raid6: int32x2 gen() 232 MB/s
[ 1.207521] raid6: int32x2 xor() 172 MB/s
[ 1.377599] raid6: int32x4 gen() 220 MB/s
[ 1.547808] raid6: int32x4 xor() 167 MB/s
[ 1.717827] raid6: int32x8 gen() 216 MB/s
[ 1.887884] raid6: int32x8 xor() 148 MB/s
[ 2.058050] raid6: neonx1 gen() 494 MB/s
[ 2.228106] raid6: neonx1 xor() 363 MB/s
[ 2.398216] raid6: neonx2 gen() 639 MB/s
[ 2.568301] raid6: neonx2 xor() 466 MB/s
[ 2.738420] raid6: neonx4 gen() 711 MB/s
[ 2.908486] raid6: neonx4 xor() 495 MB/s
[ 3.078590] raid6: neonx8 gen() 679 MB/s
[ 3.248658] raid6: neonx8 xor() 481 MB/s
[ 3.248665] raid6: using algorithm neonx4 gen() 711 MB/s
[ 3.248671] raid6: .... xor() 495 MB/s, rmw enabled
[ 3.248677] raid6: using intx1 recovery algorithm
[ 3.252232] vgaarb: loaded
[ 3.252970] SCSI subsystem initialized
[ 3.253447] usbcore: registered new interface driver usbfs
[ 3.253508] usbcore: registered new interface driver hub
[ 3.253593] usbcore: registered new device driver usb
[ 3.254300] media: Linux media interface: v0.10
[ 3.254345] Linux video capture interface: v2.00
[ 3.254421] pps_core: LinuxPPS API ver. 1 registered
[ 3.254427] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.254447] PTP clock support registered
[ 3.254480] EDAC MC: Ver: 3.0.0
[ 3.255276] Advanced Linux Sound Architecture Driver Initialized.
[ 3.255879] NetLabel: Initializing
[ 3.255887] NetLabel: domain hash size = 128
[ 3.255892] NetLabel: protocols = UNLABELED CIPSOv4
[ 3.255949] NetLabel: unlabeled traffic allowed by default
[ 3.256287] clocksource: Switched to clocksource arch_sys_counter
[ 3.256460] VFS: Disk quotas dquot_6.6.0
[ 3.256529] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.265653] NET: Registered protocol family 2
[ 3.266444] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 3.266494] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 3.266555] TCP: Hash tables configured (established 4096 bind 4096)
[ 3.266610] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 3.266643] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 3.266844] NET: Registered protocol family 1
[ 3.267217] RPC: Registered named UNIX socket transport module.
[ 3.267227] RPC: Registered udp transport module.
[ 3.267233] RPC: Registered tcp transport module.
[ 3.267238] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.269337] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.270064] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 3.275914] zbud: loaded
[ 3.278377] NFS: Registering the id_resolver key type
[ 3.278418] Key type id_resolver registered
[ 3.278425] Key type id_legacy registered
[ 3.278438] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.283408] Key type asymmetric registered
[ 3.283633] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 3.283840] io scheduler noop registered
[ 3.283848] io scheduler deadline registered
[ 3.284033] io scheduler cfq registered (default)
[ 3.291710] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[ 3.293526] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[ 3.301977] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 3.304210] console [ttyS0] disabled
[ 3.324385] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 30, base_baud = 1500000) is a U6_16550A
[ 4.109976] console [ttyS0] enabled
[ 4.114075] Serial: AMBA driver
[ 4.117919] [drm] Initialized
[ 4.128450] loop: module loaded
[ 4.132655] Loading iSCSI transport class v2.0-870.
[ 4.137979] iscsi: registered transport (tcp)
[ 4.144786] libphy: Fixed MDIO Bus: probed
[ 4.151026] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.157577] ehci-pci: EHCI PCI platform driver
[ 4.162065] ehci-platform: EHCI generic platform driver
[ 4.167533] ehci-platform 1c1b000.usb: EHCI Host Controller
[ 4.173124] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1
[ 4.181139] ehci-platform 1c1b000.usb: irq 24, io mem 0x01c1b000
[ 4.216327] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[ 4.222602] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.229408] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.236634] usb usb1: Product: EHCI Host Controller
[ 4.241506] usb usb1: Manufacturer: Linux 4.9.6-1-ARCH ehci_hcd
[ 4.247431] usb usb1: SerialNumber: 1c1b000.usb
[ 4.252618] hub 1-0:1.0: USB hub found
[ 4.256448] hub 1-0:1.0: 1 port detected
[ 4.260785] ehci-mxc: Freescale On-Chip EHCI Host driver
[ 4.266188] ehci-omap: OMAP-EHCI Host Controller driver
[ 4.271506] ehci-orion: EHCI orion driver
[ 4.275577] ehci-exynos: EHCI EXYNOS driver
[ 4.279836] tegra-ehci: Tegra EHCI driver
[ 4.283911] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.290117] ohci-pci: OHCI PCI platform driver
[ 4.294622] ohci-platform: OHCI generic platform driver
[ 4.300035] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[ 4.306687] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 2
[ 4.314555] ohci-platform 1c1b400.usb: irq 25, io mem 0x01c1b400
[ 4.390446] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.397253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.404466] usb usb2: Product: Generic Platform OHCI controller
[ 4.410391] usb usb2: Manufacturer: Linux 4.9.6-1-ARCH ohci_hcd
[ 4.416315] usb usb2: SerialNumber: 1c1b400.usb
[ 4.421440] hub 2-0:1.0: USB hub found
[ 4.425215] hub 2-0:1.0: 1 port detected
[ 4.429544] ohci-exynos: OHCI EXYNOS driver
[ 4.433838] ohci-omap3: OHCI OMAP3 driver
[ 4.438164] usbcore: registered new interface driver uas
[ 4.443561] usbcore: registered new interface driver usb-storage
[ 4.449611] usbcore: registered new interface driver ums-cypress
[ 4.455643] usbcore: registered new interface driver ums_eneub6250
[ 4.461879] usbcore: registered new interface driver ums-freecom
[ 4.467929] usbcore: registered new interface driver ums-isd200
[ 4.473877] usbcore: registered new interface driver ums-usbat
[ 4.482740] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
[ 4.489554] sun6i-rtc 1f00000.rtc: RTC enabled
[ 4.494293] i2c /dev entries driver
[ 4.500794] cpu cpu0: failed to get clock: -2
[ 4.505163] cpufreq-dt: probe of cpufreq-dt failed with error -2
[ 4.511857] sdhci: Secure Digital Host Controller Interface driver
[ 4.518053] sdhci: Copyright(c) Pierre Ossman
[ 4.522949] Synopsys Designware Multimedia Card Interface Driver
[ 4.529333] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400[ 4.535970] usbcore: registered new interface driver vub300
[ 4.541764] usbcore: registered new interface driver ushc
[ 4.547976] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[ 4.606320] sunxi-mmc 1c0f000.mmc: base:0xe082a000 irq:23
[ 4.611986] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.622101] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.628311] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.634010] usbcore: registered new interface driver usbhid
[ 4.639605] usbhid: USB HID core driver
[ 4.643683] ashmem: initialized
[ 4.652891] NET: Registered protocol family 10
[ 4.658363] mip6: Mobile IPv6
[ 4.661338] NET: Registered protocol family 17
[ 4.665855] Key type dns_resolver registered
[ 4.670301] ThumbEE CPU extension supported.
[ 4.674617] Registering SWP/SWPB emulation handler
[ 4.680220] registered taskstats version 1
[ 4.684429] zswap: loaded using pool lzo/zbud
[ 4.691064] Btrfs loaded, crc32c=crc32c-generic
[ 4.694399] mmc0: host does not support reading read-only switch, assuming write-enable
[ 4.694511] mmc0: new SD card at address e624
[ 4.695133] mmcblk0: mmc0:e624 SU01G 969 MiB
[ 4.696512] mmcblk0: p1
[ 4.716021] Key type encrypted registered
[ 4.725535] input: r_gpio_keys as /devices/platform/r_gpio_keys/input/input0
[ 4.732722] sun6i-rtc 1f00000.rtc: setting system clock to 2017-02-02 00:24:56 UTC (1485995096)
[ 4.741429] sr_init: No PMIC hook to init smartreflex
[ 4.746644] sr_init: platform driver register failed for SR
[ 4.752454] vcc3v0: disabling
[ 4.755422] vcc5v0: disabling
[ 4.758418] ALSA device list:
[ 4.761384] No soundcards found.
[ 4.766022] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[ 4.774910] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[ 4.800791] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
[ 4.809161] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 4.818457] devtmpfs: mounted
[ 4.822553] Freeing unused kernel memory: 1024K (c1100000 - c1200000)
[ 5.162758] random: fast init done
[ 5.582597] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.650297] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.668873] systemd[1]: Detected architecture arm.
Welcome to Arch Linux ARM!
[ 5.707380] systemd[1]: Set hostname to <alarm>.
[ 6.390709] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
[ 6.436736] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
[ 6.466658] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 6.496465] systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
[ 6.526517] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 6.556750] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 6.586587] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ OK ] Listening on Device-mapper event daemon FIFOs.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Created slice User and Session Slice.
[ OK ] Created slice System Slice.
[ OK ] Reached target Slices.
[ OK ] Created slice system-serial\x2dgetty.slice.
Mounting Configuration File System...
Starting Apply Kernel Variables...
Starting Remount Root and Kernel File Systems...
[ OK ] Created slice system-getty.slice.
[ OK ] Listening on udev Control Socket.
[ OK ] Listening on udev Kernel Socket.
Starting Journal Service...
[ OK ] Listening on Process Core Dump Socket.
Mounting Temporary Directory...
[ OK ] Reached target Paths.
Mounting Debug File System...
Mounting POSIX Message Queue File System...
[ OK ] Listening on LVM2 metadata daemon socket.
[ OK ] Reached target Remote File Systems.
Starting Create list of required st…ce nodes for the current kernel...
[ OK ] Mounted Temporary Directory.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Configuration File System.
[ OK ] Mounted Debug File System.
[ OK ] Started Journal Service.
[ OK ] Started Apply Kernel Variables.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Create list of required sta…vice nodes for the current kernel.
Starting udev Coldplug all Devices...
Starting Load/Save Random Seed...
Starting Create Static Device Nodes in /dev...
Starting Flush Journal to Persistent Storage...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started udev Coldplug all Devices.
[ 8.051109] random: crng init done
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Started udev Kernel Device Manager.
[ OK ] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Synchronized.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily man-db cache update.
[ OK ] Started Daily rotation of log files.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Sockets.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Started Daily verification of password and group files.
[ OK ] Reached target Timers.
[ OK ] Reached target Basic System.
[ OK ] Started Entropy Harvesting Daemon.
Starting Login Service...
[ OK ] Started D-Bus System Message Bus.
Starting Network Service...
[ OK ] Found device /dev/ttyS0.
[ OK ] Started Login Service.
[ OK ] Started Network Service.
[ OK ] Reached target Network.
Starting Permit User Sessions...
[ OK ] Started OpenSSH Daemon.
[ OK ] Started Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Multi-User System.
[ OK ] Reached target Graphical Interface.
Arch Linux 4.9.6-1-ARCH (ttyS0)
alarm login:
正如你所看见：
- CPU: Allwinner H3 (SUN8I 1680)
- Model: Xunlong Orange Pi One
帐号及密码
登录密码还是为：
- root
- alarm
调整文件系统
- 关于怎么扩展分区呢，推荐在Linux（Ubutnu）中使用GParted Partition Editor.
CPU 信息
[alarm@alarm ~]$ lscpu
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model: 5
Model name: ARMv7 Processor rev 5 (v7l)
BogoMIPS: 48.00
Flags: half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm
[alarm@alarm ~]$
系统分区
[alarm@alarm ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
dev 92M 0 92M 0% /dev
run 118M 200K 118M 1% /run
/dev/mmcblk0p1 3.7G 1.3G 2.3G 37% /
tmpfs 118M 0 118M 0% /dev/shm
tmpfs 118M 0 118M 0% /sys/fs/cgroup
tmpfs 118M 0 118M 0% /tmp
tmpfs 24M 0 24M 0% /run/user/1000
[alarm@alarm ~]$
