Red5 装好了，也能启动了，但是却访问不了（http://server_domain:5080/ or http://server_ip:5080），痛苦中；
===========
OS: CentOS Linux 5.4
==========
netstat -lnp | grep java
tcp 0 0 0.0.0.0:59083 0.0.0.0:* LISTEN 25907/java
tcp 0 0 0.0.0.0:1935 0.0.0.0:* LISTEN 25907/java
tcp 0 0 0.0.0.0:9999 0.0.0.0:* LISTEN 25907/java
tcp 0 0 0.0.0.0:8787 0.0.0.0:* LISTEN 23373/java
tcp 0 0 0.0.0.0:5080 0.0.0.0:* LISTEN 25907/java
tcp 0 0 0.0.0.0:8443 0.0.0.0:* LISTEN 25907/java
=========
安装参考：
http://www.sohailriaz.com/how-to-install-red5-server-on-centos-53/comment-page-7/#comment-1108
/******* 解决方法 *********/
原来是还需要打开1935,9999,5857,5080这4个端口，发现如果真有这样的技术问题，外国佬那也去问问好了。听说外国佬的耐心很足，不像我等匆匆忙忙，又要急着干活去了：
附：
=====================
But to help you, read this or follow the link.
http://wiki.centos.org/HowTos/Network/IPTables
You must edit IPtables in your control panel. Eg, through WHM, Pleask, Webadmin.
If you are not using a control panel, you must edit them manually. Follow the above link to explain how to do it or try the following,
vi /etc/sysconfig/iptables
Add the following lines:
-A RH-Firewall-1-INPUT -m state –state NEW -m tcp -p tcp –dport 5080 -j ACCEPT
-A RH-Firewall-1-INPUT -m state –state NEW -m tcp -p tcp –dport 1935 -j ACCEPT
Then save the file (press ESC and then type :wq)
Then,
/etc/init.d/iptables restart
DONE!
NOTE!!!!
the line starts with “-A” and ends with “ACCEPT”
========================
最后又遇到别的问题，因急着需要，所以放弃了red5，而选用了FMS。
