Change the File Store Location for Lync Server 2013 Pool

简介:

In the event that you need to remove the file server that is currently acting as the file store for your Microsoft Lync Server 2013 deployment or make other changes that would make the current file store unavailable, you need to create a new share. Then, you make it available to your deployment as a file store by defining it in Topology Builder and publishing the changes. You shut down the Lync Server services that use the file store that you want to remove, move the data to the new file store, and then you restart the servers or services. Optionally, you can remove the old file share and directory.

In the scenario below I'm changing the File Store location from Lync Server (cp-lync2013.cozumpark.local)to a Domain Control server (cp-dc2012.cozumpark.local).  You can find the currently assigned File Store for each pool in Topology Builder / Lync Server / SiteName / Shared Components / File Stores / File Store / Dependent Pools.

(Before starting: logon any of the Archiving Servers, Director pools, Directors, Front End Servers, or Front End pools that are using the file store that you want to remove and stop CS-WindowsService)

wKiom1c7zQThnVbPAABF5pZH9GE164.png


1.Log on to a computer as a member of the RTCUniversersalServerAdmins or CsServerAdministrator group where the Lync Server 2013, Administrative Tools are installed

2.Open Topology Builder, select Download Topology from existing deployment, and then click OK.

wKioL1c7zhHgmzN8AAEAHkQZ_u0860.png

3. In Save Topology As, type a name for the topology document in File name, and then click Save

4. In Topology Builder, expand Shared Components / File Stores and check Dependent Pools. (or you can check in Topology Builder, expand each of the three server roles -that is, Front End Server, Director, or Archiving Server- right-click the server, and then click Edit Properties find file store)

wKiom1c7zX2TzMUkAACEb-ftvOk072.png

5. Right-click the File Stores, and then select New File Store...

wKioL1c7zrjRajc5AACgU-4-caE245.png

6.On Define New File Store page, type required information and click OK

wKioL1c7zv6AZsgHAAEJdj94Z_E786.png


To configure shared folder permissions on new server

- Go to new share and right click, Properties / Sharing / Advanced Sharing

- In Advanced Sharing page click Permissions

- For the Everyone, select the following under Allow:

Full Control

Change

Read

- Click Apply, and then click OK.

wKioL1c7zUPx6g1fAADUZVXdHZw255.png

wKioL1c7zz2gTK3FAABmwlGP1vM646.png

7. in Topology Builder, expand each of the three server roles -that is, Front End Server, Director, or Archiving Server- right-click the server, and then click Edit Properties find file store and select new store. (Repeat this step for each Archiving Server,      Director pool, Director, Front End Server, and Front End pool)

wKiom1c7zoXAuS-OAADdWziYAqY908.png

8.Select top of left panel, click Action / Publish Topology

wKiom1c7zrmxcPlWAAEPv-HdCf8590.png

9.On the Publish the topology page, click Next

wKioL1c7z9jw0vaHAAFIbdPRKjg287.png

10.When the publish process has completed, click Finish

wKioL1c70A-zny18AACd8noGYkM458.png

11. Dependent pools has been changed to new file store.

wKioL1c70EmwXGnEAACErn0uNkw133.png

12. If you now check the new share you can see that all the correct groups have been added

RTCHSUniversalServices

RTCComponentUniversalServices

RTCUniversalServerAdmins

RTCUniversalConfigReplicator

wKioL1c70IGwFQCKAAEzHNZn1wA438.png

13.Check replication status, and then run the Lync Server Deployment Wizard. 

You must repeat the Lync Server Deployment Wizard Step 2: Setup or Remove Lync Server Components on each server affected by the change of file store location. Server roles affected by the relocation of the file store location:

Front End pool, Front End Servers

Standard Edition server

Director, Director pool

Archiving Servers

(Optional) if you prefer to use the Lync Server Management Shell, run the following cmdlet on each affected server role:

Enable-CsComputer

wKiom1c7z8vgWG4sAABMDXp-XJ0247.png

14.Start a command prompt: Click Start, click Run, and then type cmd.exe.

15.Type the following command: 

Robocopy \\<OldFileServer>\<OldShare> \\<NewFileServer>\<NewShare> /S /R:10 /W:10 /XF Meeting.Active /MT /LOG:<directory path\logname>

Robocopy \\cp-lync2013.cozumpark.local\LyncShare \\cp-dc2012.cozumpark.local\LyncShares /S /R:10 /W:10 /XF Meeting.Active /MT /LOG:C:\log.txt

wKiom1c70AfAyHUDAAD8-dPbtBo015.png

wKiom1c70FWBHL95AAA9NtIL7FI737.png

16.When the data copy is complete, in the Lync Server 2013 Control Panel, click Topology, and then click Status

wKiom1c70JCBABHVAACDN8tVBX8346.png

17.For each Archiving Server, Director pool, Director, Front End Server, or Front End pool that you stopped the services on previously, do the following:
a. In the list of servers in the deployment, click the server, click Action, click Start all services. Repeat for each Archiving Server, Director pool, Director, Front End Server, and Front End pool in your deployment.

wKioL1c70b-REOzKAABMeRBhTBI467.png

b. Remove the old file store from the topology and then publish the topology

wKiom1c70RegC1KmAAFNS-Yh438263.png

wKioL1c70jCyR9FYAAB_BNjpUkk741.png

18.(Optional) Log on to the computer that contains the file store that you just removed as a member of the local Administrators group or the Domain Admins group, and then remove the old file share and directory

wKiom1c70XHQH0XHAACWaAhL9Kw321.png

本文转自  zyliday   51CTO博客,原文链接:http://blog.51cto.com/itsoul/1774623

相关文章
|
6月前
|
SQL 运维 关系型数据库
will be dropped if server is in r-o mode问题解决
【6月更文挑战第26天】will be dropped if server is in r-o mode问题解决
159 2
|
7月前
|
数据库
Greenplum【部署 09】has an active database process on port = 6000 和 [Errno 2] No such file or directory
Greenplum【部署 09】has an active database process on port = 6000 和 [Errno 2] No such file or directory
120 0
|
关系型数据库 MySQL 数据库
【报错】DVWA遇到Could not connect to the database service. Please check the config file. Database Error
【报错】DVWA遇到Could not connect to the database service. Please check the config file. Database Error
1280 0
|
数据库
loading local data is disabled; this must be enabled on both the client and server sides
loading local data is disabled; this must be enabled on both the client and server sides
191 0
|
MySQL 关系型数据库 Shell
Unit mysql.service failed to load: No such file or directory的解决办法
Failed to issue method call: Unit mysql.service failed to load: No such file or directory的解决办法 1、软件环境: OpenSUSE 13.
3544 0
|
Java 关系型数据库 Oracle
Unable to read additional data from server sessionid
jenkins构建项目报错: Caused by: com.weibo.api.motan.exception.MotanFrameworkException: error_message: ClusterSupport No service urls for the refer:motan://192.
10545 0