华为交换机trunk

两个华为交换机之间配置trunk

LSW1 LSW2

192.168.2.1/24 -------vlan2 (E0/0/2)

192.168.3.1/24 -------vlan3 (E0/0/3)

---------------------------------^-^----------------------------------------

1.配置LSW1，LSW2的管理vlan 1 按照配置LSW1的方法配置LSW2

2.创建vlan 2 vlan 3把端口划分进去

[LSW1]int e0/0/2

[LSW1-Ethernet0/0/2]port link-type access

[LSW1]vlan 2

[LSW1-vlan2]port Ethernet 0/0/2

[LSW1]int e0/0/3

[LSW1-Ethernet0/0/3]port link-type access

[LSW1]vlan 3

[LSW1-vlan2]port Ethernet 0/0/3

[LSW2]int e0/0/2

[LSW2-Ethernet0/0/2]port link-type access

[LSW2]vlan 2

[LSW2-vlan2]port Ethernet 0/0/2

[LSW2]int e0/0/3

[LSW2-Ethernet0/0/3]port link-type access

[LSW2]vlan 3

[LSW2-vlan2]port Ethernet 0/0/3

2.LSW1---------LSW2的trunk

[LSW1]int e0/0/1

[LSW1-Ethernet0/0/1]port link-type trunk

[LSW1-Ethernet0/0/1]port trunk allow-pass vlan 1 2 3

[LSW2]int e0/0/1

[LSW2-Ethernet0/0/1]port link-type trunk

[LSW2-Ethernet0/0/1]port trunk allow-pass vlan 1 2 3

3。主机1 ping 主机2

本文转自zhang25yun51CTO博客，原文链接： http://blog.51cto.com/1585654/1307098，如需转载请自行联系原作者