开发者社区> ghost丶桃子> 正文
阿里云
为了无法计算的价值
打开APP
阿里云APP内打开

Corosync+Pacemaker+DRBD+Mysql高可用HA配置

简介:
+关注继续查看
原创作品,允许转载,转载时请务必以超链接形式标明文章 原始出处 、作者信息和本声明。否则将追究法律责任。http://koumm.blog.51cto.com/703525/1769116

操作系统: CentOS 6.6 x64,本文采用rpm方式安装corosync+pacemaker+drbd,采用二进制版本安装mysql-5.6.29。本文是在Corosync+Pacemaker+DRBD+NFS高可用实例配置基础上进行配置修改,然后进行测试的安装过程。

一、双机配置

1. app1,app2配置hosts文件,以及主机名。

[root@app1 soft]# vi /etc/hosts   
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4    
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6    
192.168.0.24         app1    
192.168.0.25         app2    
10.10.10.24          app1-priv    
10.10.10.25          app2-priv

说明:10段是心跳IP, 192.168段是业务IP, 采用VIP地址是192.168.0.26。

 

2. 关闭selinux与防火墙

sed -i '/SELINUX/s/enforcing/disabled/' /etc/selinux/config 
setenforce 0 
chkconfig iptables off 
service iptables stop

 

3. 配置各节点ssh互信,好像可配\可不配,方便管理。

app1: 
[root@app1 ~]# ssh-keygen  -t rsa -f ~/.ssh/id_rsa  -P ''  
[root@app1 ~]# ssh-copy-id -i .ssh/id_rsa.pub root@app2

app2: 
[root@app2 ~]# ssh-keygen  -t rsa -f ~/.ssh/id_rsa  -P '' 
[root@app2 ~]# ssh-copy-id -i .ssh/id_rsa.pub root@app1

 

二、DRDB安装配置

1. app1,app2配置hosts文件以及准备磁盘分区

app1: /dev/sdb1  —> app2: /dev/sdb1

 

2. app1,app2安装drbd并安装

(1) 下载drbd安装包, CentOS6.6采用kmod-drbd84-8.4.5-504.1安装包才可用。

http://rpm.pbone.net/

drbd84-utils-8.9.1-1.el6.elrepo.x86_64.rpm 
kmod-drbd84-8.4.5-504.1.el6.x86_64.rpm

# rpm -ivh drbd84-utils-8.9.5-1.el6.elrepo.x86_64.rpm kmod-drbd84-8.4.5-504.1.el6.x86_64.rpm 
Preparing...                ########################################### [100%] 
   1:drbd84-utils           ########################################### [ 50%] 
   2:kmod-drbd84            ########################################### [100%] 
Working. This may take some time ... 
Done. 
#

 

(2) 加载DRBD到内核模块

app1,app2分别操作,并加入到/etc/rc.local文件中。 
modprobe drbd 
lsmode |grep drbd

 

3. 创建修改配置文件。节点1,节点2一样配置。

[root@app1 ~]# vi /etc/drbd.d/global_common.conf 
global { 
        usage-count no; 

common { 
        protocol C; 
        disk { 
                on-io-error detach; 
                no-disk-flushes; 
                no-md-flushes;  
        } 
        net { 
                sndbuf-size 512k; 
                max-buffers     8000; 
                unplug-watermark   1024; 
                max-epoch-size  8000; 
                cram-hmac-alg "sha1"; 
                shared-secret "hdhwXes23sYEhart8t"; 
                after-sb-0pri disconnect; 
                after-sb-1pri disconnect; 
                after-sb-2pri disconnect; 
                rr-conflict disconnect; 
        } 
        syncer { 
                rate 300M; 
                al-extents 517; 
        } 
}

resource data { 
      on app1 { 
               device    /dev/drbd0; 
               disk      /dev/sdb1; 
               address   10.10.10.24:7788; 
               meta-disk internal; 
      } 
      on app2 { 
               device     /dev/drbd0; 
               disk       /dev/sdb1; 
               address    10.10.10.25:7788; 
               meta-disk internal; 
      } 
}

 

4. 初始化资源

在app1和app2上分别执行:

# drbdadm create-md data

initializing activity log 
NOT initializing bitmap 
Writing meta data... 
New drbd meta data block successfully created.

 

5. 启动服务

在app1和app2上分别执行:或采用 drbdadm up data

# service drbd start

Starting DRBD resources: [ 
     create res: data 
   prepare disk: data 
    adjust disk: data 
     adjust net: data 

.......... 
#

 

6. 查看启动状态, 两节点应均处于Secondary状态。

cat /proc/drbd       #或者直接使用命令drbd-overview

节点1: 
[root@app1 drbd.d]# cat /proc/drbd  
version: 8.4.5 (api:1/proto:86-101) 
GIT-hash: 1d360bde0e095d495786eaeb2a1ac76888e4db96 build by root@node1.magedu.com, 2015-01-02 12:06:20
0: cs:Connected ro:Secondary/Secondary ds:Inconsistent/Inconsistent C r----- 
    ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:20964116


节点2: 
[root@app2 drbd.d]# cat /proc/drbd  
version: 8.4.5 (api:1/proto:86-101) 
GIT-hash: 1d360bde0e095d495786eaeb2a1ac76888e4db96 build by root@node1.magedu.com, 2015-01-02 12:06:20
0: cs:Connected ro:Secondary/Secondary ds:Inconsistent/Inconsistent C r----- 
    ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:d oos:20964116

 

7. 将其中一个节点配置为主节点

我们需要将其中一个节点设置为Primary,在要设置为Primary的节点上执行如下两条命令均可: 
drbdadm -- --overwrite-data-of-peer primary data   
drbdadm primary --force data


主节点查看同步状态: 
[root@app1 drbd.d]# cat /proc/drbd  
version: 8.4.5 (api:1/proto:86-101) 
GIT-hash: 1d360bde0e095d495786eaeb2a1ac76888e4db96 build by root@node1.magedu.com, 2015-01-02 12:06:20
0: cs:SyncSource ro:Primary/Secondary ds:UpToDate/Inconsistent C r----- 
    ns:1229428 nr:0 dw:0 dr:1230100 al:0 bm:0 lo:0 pe:2 ua:0 ap:0 ep:1 wo:d oos:19735828 
        [>...................] sync'ed:  5.9% (19272/20472)M 
        finish: 0:27:58 speed: 11,744 (11,808) K/sec 
[root@app1 drbd.d]#

 

8. 创建文件系统

文件系统的挂载只能在Primary节点进行,只有在设置了主节点后才能对drbd设备进行格式化, 格式化与手动挂载测试。

[root@app1 ~]# mkfs.ext4 /dev/drbd0 
[root@app1 ~]# mount /dev/drbd0 /data

 

三、安装配置Mysql-5.6.x

1. app1\app2下载编译版本mysql安装

wget http://mirrors.sohu.com/mysql/MySQL-5.6/mysql-5.6.29-linux-glibc2.5-x86_64.tar.gz 
tar zxvf mysql-5.6.29-linux-glibc2.5-x86_64.tar.gz  -C /usr/local 
cd /usr/local/ 
ln -sv mysql-5.6.29-linux-glibc2.5-x86_64 mysql 
groupadd mysql 
useradd -g mysql -M -s /sbin/nologin mysql 
chown -R mysql:mysql /usr/local/mysql

 

2. app1下初始化数据库(初始化目录为drbd0同步目录中)

/usr/local/mysql/scripts/mysql_install_db --user=mysql --basedir=/usr/local/mysql --datadir=/data/mysql3306

 

3, app1,app2下创建配置文件及服务

cd /usr/local/mysql 
cp support-files/my-default.cnf /etc/my.cnf 
cp support-files/mysql.server  /etc/rc.d/init.d/mysqld 
chkconfig --add mysqld

 

4. app1,app2配置Mysql命令链接,也可以采用加入环境变量中,该方式可以略过。

ln -sf /usr/local/mysql/bin/mysql /usr/bin/mysql 
ln -sf /usr/local/mysql/bin/mysqldump /usr/bin/mysqldump 
ln -sf /usr/local/mysql/bin/myisamchk /usr/bin/myisamchk 
ln -sf /usr/local/mysql/bin/mysqld_safe /usr/bin/mysqld_safe

或通过加入环境变量中解决。

# vi /etc/profile 
export PATH=/usr/local/mysql/bin/:$PATH 
# source /etc/profile

ln -sv /usr/local/mysql/include  /usr/include/mysql 
echo '/usr/local/mysql/lib' > /etc/ld.so.conf.d/mysql.conf 
ldconfig

 

5. app1上Mysql配置文件(两边保持配置文件一致)

vi /etc/my.cnf

[client] 
port        = 3306 
default-character-set  = utf8 
socket      = /tmp/mysql.sock 
[mysqld] 
character-set-server   = utf8 
collation-server       = utf8_general_ci 
port                   = 3306 
socket                 = /tmp/mysql.sock 
basedir                = /usr/local/mysql 
datadir                = /data/mysql3306 
skip-external-locking 
key_buffer_size        = 16M 
max_allowed_packet     = 1M 
table_open_cache       = 64 
sort_buffer_size       = 512K 
net_buffer_length      = 8K 
read_buffer_size       = 256K 
read_rnd_buffer_size    = 512K 
myisam_sort_buffer_size = 8M 
log-bin                 = mysql-bin 
binlog_format           = mixed 
server-id               = 1 
[mysqldump] 
quick 
max_allowed_packet = 16M 
[mysql] 
no-auto-rehash

[myisamchk] 
key_buffer_size = 20M 
sort_buffer_size = 20M 
read_buffer = 2M 
write_buffer = 2M

[mysqlhotcopy] 
interactive-timeout

 

6. 启动mysql,不要配置开机自启动。

service mysqld start

 

7. 修改管理员密码并测试

# /usr/local/mysql/bin/mysqladmin -u root password 'admin' #设置管理员密码 
# /usr/local/mysql/bin/mysql -u root -p   #测试密码输入

 

8. 复制配置文件到app2

# scp /etc/my.cnf app2:/etc/

 

9. app1关闭mysql并设置开机不启动

[root@node1 ~]# service mysqld stop 
[root@node1 data]# chkconfig mysqld off

 

10.将node2节点上的DRBD设置为主节点并挂载

(1) app1卸载/dev/drbd0

# umount /data/ 
# drbdadm secondary data  
# drbd-overview   
  0:web/0  Connected Secondary/Secondary UpToDate/UpToDate C r-----

(2) app2配置drbd为主后,测试mysql的启动。

# drbdadm primary data 
# drbd-overview   
  0:web/0  Connected Primary/Secondary UpToDate/UpToDate C r-----  

# mkdir /data  
# mount /dev/drbd0 /data/  
# service mysqld start

 

四、corosync+pacemaker

1. app1,app2配置安装corosync pacemaker 

# yum install corosync pacemaker -y

2. app1,app2安装crmsh

RHEL自6.4起不再提供集群的命令行配置工具crmsh,要实现对集群资源管理,还需要独立安装crmsh。 
crmsh的rpm安装可从如下地址下载:http://download.opensuse.org/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/

[root@app1 crm]# yum install python-dateutil -y   
说明:python-pssh、pssh依懒于python-dateutil包

[root@app1 crm]# rpm -ivh pssh-2.3.1-4.2.x86_64.rpm python-pssh-2.3.1-4.2.x86_64.rpm crmsh-2.1-1.6.x86_64.rpm 
warning: pssh-2.3.1-4.2.x86_64.rpm: Header V3 RSA/SHA1 Signature, key ID 17280ddf: NOKEY 
Preparing...                ########################################### [100%] 
   1:python-pssh            ########################################### [ 33%] 
   2:pssh                   ########################################### [ 67%] 
   3:crmsh                  ########################################### [100%] 
[root@app1 crm]# 
[root@app1 crm]#

 

3. 创建corosync配置文件,app1,app2一样。

cd /etc/corosync/ 
cp corosync.conf.example corosync.conf

vi /etc/corosync/corosync.conf 
# Please read the corosync.conf.5 manual page 
compatibility: whitetank 
totem {    
        version: 2 
        secauth: on 
        threads: 0 
        interface { 
                ringnumber: 0 
                bindnetaddr: 10.10.10.0 
                mcastaddr: 226.94.8.8 
                mcastport: 5405 
                ttl: 1 
        } 
}

logging { 
        fileline: off 
        to_stderr: no 
        to_logfile: yes 
        to_syslog: no 
        logfile: /var/log/cluster/corosync.log 
        debug: off 
        timestamp: on 
        logger_subsys { 
                subsys: AMF 
                debug: off 
        } 
}

amf { 
        mode: disabled 
}

service { 
        ver:  1                   
        name: pacemaker        

aisexec { 
        user: root 
        group:  root 
}

 

4. 创建认证文件,app1,app2一样

各节点之间通信需要安全认证,需要安全密钥,生成后会自动保存至当前目录下,命名为authkey,权限为400。

[root@app1 corosync]# corosync-keygen 
Corosync Cluster Engine Authentication key generator. 
Gathering 1024 bits for key from /dev/random. 
Press keys on your keyboard to generate entropy. 
Press keys on your keyboard to generate entropy (bits = 128). 
Press keys on your keyboard to generate entropy (bits = 192). 
Press keys on your keyboard to generate entropy (bits = 256). 
Press keys on your keyboard to generate entropy (bits = 320). 
Press keys on your keyboard to generate entropy (bits = 384). 
Press keys on your keyboard to generate entropy (bits = 448). 
Press keys on your keyboard to generate entropy (bits = 512). 
Press keys on your keyboard to generate entropy (bits = 576). 
Press keys on your keyboard to generate entropy (bits = 640). 
Press keys on your keyboard to generate entropy (bits = 704). 
Press keys on your keyboard to generate entropy (bits = 768). 
Press keys on your keyboard to generate entropy (bits = 832). 
Press keys on your keyboard to generate entropy (bits = 896). 
Press keys on your keyboard to generate entropy (bits = 960). 
Writing corosync key to /etc/corosync/authkey. 
[root@app1 corosync]#

 

5. 将刚才配置的三个文件同步至app2,同步过去后要修改ha.cf文件中的心跳IP

# scp authkeys corosync.conf  root@app2:/etc/corosync/  

 

6. 启动corosync\pacemaker服务,测试能否正常提供服务

节点1:   
[root@app1 ~]# service corosync start    
Starting Corosync Cluster Engine (corosync):               [OK]

[root@app1 ~]# service pacemaker start 
Starting Pacemaker Cluster Manager                         [OK]

配置服务开机自启动: 
chkconfig corosync on 
chkconfig pacemaker on


节点2:   
[root@app2 ~]# service corosync start    
Starting Corosync Cluster Engine (corosync):               [OK]

[root@app1 ~]# service pacemaker start 
Starting Pacemaker Cluster Manager                         [OK]

配置服务开机自启动: 
chkconfig corosync on 
chkconfig pacemaker on

 

7. 测试corosync,pacemaker,crmsh安装情况

(1) 查看节点情况

[root@app1 ~]# crm status 
Last updated: Tue Jan 26 13:13:19 2016 
Last change: Mon Jan 25 17:46:04 2016 via cibadmin on app1 
Stack: classic openais (with plugin) 
Current DC: app1 - partition with quorum 
Version: 1.1.10-14.el6-368c726 
2 Nodes configured, 2 expected votes 
0 Resources configured

Online: [ app1 app2 ]

 

(2) 查看端口启动情况

# netstat -tunlp 
Active Internet connections (only servers) 
Proto Recv-Q Send-Q Local Address               Foreign Address             State       PID/Program name   
udp        0      0 10.10.10.25:5404            0.0.0.0:*                               2828/corosync       
udp        0      0 10.10.10.25:5405            0.0.0.0:*                               2828/corosync       
udp        0      0 226.94.8.8:5405             0.0.0.0:*                               2828/corosync      

 

(3) 查看日志

[root@app1 corosync]# tail -f  /var/log/cluster/corosync.log

可以查看日志中关键信息: 
Jan 23 16:09:30 corosync [MAIN  ] Corosync Cluster Engine ('1.4.7'): started and ready to provide service. 
Jan 23 16:09:30 corosync [MAIN  ] Successfully read main configuration file '/etc/corosync/corosync.conf'. 
.... 
Jan 23 16:09:30 corosync [TOTEM ] Initializing transmit/receive security: libtomcrypt SOBER128/SHA1HMAC (mode 0). 
Jan 23 16:09:31 corosync [TOTEM ] The network interface [10.10.10.24] is now up. 
Jan 23 16:09:31 corosync [TOTEM ] A processor joined or left the membership and a new membership was formed. 
Jan 23 16:09:48 corosync [TOTEM ] A processor joined or left the membership and a new membership was formed. 
[root@app1 corosync]#

 

五、配置pacemaker

1. 基本配置

corosync默认启用了stonith功能,而我们要配置的集群并没有stonith设备,因此在配置集群的全局属性时要对其禁用。

# crm 
crm(live)# configure                                      ##进入配置模式 
crm(live)configure# property stonith-enabled=false        ##禁用stonith设备 
crm(live)configure# property no-quorum-policy=ignore      ##不具备法定票数时采取的动作 
crm(live)configure# rsc_defaults resource-stickiness=100  ##设置默认的资源黏性,只对当前节点有效。 
crm(live)configure# verify                                ##校验 
crm(live)configure# commit                                ##校验没有错误再提交 
crm(live)configure# show                                  ##查看当前配置 
node app1 
node app2 
property cib-bootstrap-options: \ 
        dc-version=1.1.11-97629de \ 
        cluster-infrastructure="classic openais (with plugin)" \ 
        expected-quorum-votes=2 \ 
        stonith-enabled=false \ 
        default-resource-stickiness=100 \ 
        no-quorum-policy=ignore

 

2. 资源配置

#命令使用经验说明:verify报错的,可以直接退出,也可以采用edit编辑,修改正确为止。 
# crm configure edit  可以直接编辑配置文件

 

(1) 添加VIP

不要单个资源提交,等所有资源及约束一起建立之后提交。 
crm(live)configure# primitive vip ocf:heartbeat:IPaddr params ip=192.168.0.26 cidr_netmask=24 nic=eth0:1 op monitor interval=30s timeout=20s on-fail=restart 
crm(live)configure# verify 

 

(2) 添加drdb服务

crm(live)configure# primitive mydrbd ocf:linbit:drbd params drbd_resource=data op monitor role=Master interval=20 timeout=30 op monitor role=Slave interval=30 timeout=30 op start timeout=240 op stop timeout=100 
crm(live)configure# verify

把drbd设为主从资源: 
crm(live)configure# ms ms_mydrbd mydrbd meta master-max=1 master-node-max=1 clone-max=2  clone-node-max=1 notify=true 
crm(live)configure# verify

 

(3) 文件系统挂载服务:

crm(live)configure# primitive mystore ocf:heartbeat:Filesystem params device=/dev/drbd0 directory=/data fstype=ext4 op start timeout=60s op stop timeout=60s op monitor interval=30s timeout=40s on-fail=restart 
crm(live)configure# verify

 

(4) 创建约束,很关键,VIP,DRBD, 目录挂载均在一台节点上,而且VIP,目录挂载均依懒于主DRBD.

创建组资源,vip与mystore一起。                    
crm(live)configure# group g_service vip mystore 
crm(live)configure# verify

创建位置约束,组资源的启动依懒于drbd主节点 
crm(live)configure# colocation c_g_service inf: g_service ms_mydrbd:Master

创建位置约整,mystore存储挂载依赖于drbd主节点

crm(live)configure# colocation mystore_with_drbd_master inf: mystore ms_mydrbd:Master

启动顺序依懒,drbd启动后,创建g_service组资源

crm(live)configure# order o_g_service inf: ms_mydrbd:promote g_service:start 
crm(live)configure# verify 
crm(live)configure# commit

 

(5) 增加mysql资源

crm(live)# configure   
crm(live)configure# primitive mysqld lsb:mysqld  op monitor interval=20 timeout=20 on-fail=restart 
  
创建mysql服务与g_service组在一起 
crm(live)configure# colocation mysqld_with_g_service inf: mysqld g_service   
crm(live)configure# verify    
crm(live)configure# show   

创建启动顺序,mysql服务在g_service组启动之后再启动 
crm(live)configure# order mysqld_after_g_service mandatory: g_service mysqld  
crm(live)configure# verify    
crm(live)configure# show    
crm(live)configure# commit

 

3. 配置完成后,查看状态

[root@app1 ~]# crm status 
Last updated: Fri Apr 29 14:59:14 2016 
Last change: Fri Apr 29 14:59:05 2016 via cibadmin on app1 
Stack: classic openais (with plugin) 
Current DC: app1 - partition with quorum 
Version: 1.1.10-14.el6-368c726 
2 Nodes configured, 2 expected votes 
5 Resources configured

Online: [ app1 app2 ]

Master/Slave Set: ms_mydrbd [mydrbd] 
     Masters: [ app1 ] 
     Slaves: [ app2 ] 
mysqld (lsb:mysqld):   Started app1 
Resource Group: g_service 
     vip        (ocf::heartbeat:IPaddr):        Started app1 
     mystore    (ocf::heartbeat:Filesystem):    Started app1

[root@app1 ~]#

 

4. 模拟故障切换

(1) app1上操作standby

[root@app1 mysql]# crm node standby app1

(2) app1再查看切换状态:状态转移都很成功。

[root@app1 ~]# crm status 
Last updated: Fri Apr 29 15:12:01 2016 
Last change: Fri Apr 29 15:01:49 2016 via crm_attribute on app1 
Stack: classic openais (with plugin) 
Current DC: app1 - partition with quorum 
Version: 1.1.10-14.el6-368c726 
2 Nodes configured, 2 expected votes 
5 Resources configured

Node app1: standby 
Online: [ app2 ]

Master/Slave Set: ms_mydrbd [mydrbd] 
     Masters: [ app2 ] 
     Stopped: [ app1 ] 
mysqld (lsb:mysqld):   Started app2 
Resource Group: g_service 
     vip        (ocf::heartbeat:IPaddr):        Started app2 
     mystore    (ocf::heartbeat:Filesystem):    Started app2 
[root@app1 ~]#

 

(3) app2上就可以测试mysql登录了:

[root@app2 ~]# mysql -uroot -padmin 
Warning: Using a password on the command line interface can be insecure. 
Welcome to the MySQL monitor.  Commands end with ; or \g. 
Your MySQL connection id is 1 
Server version: 5.6.29-log MySQL Community Server (GPL)

Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its 
affiliates. Other names may be trademarks of their respective 
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> \q 
Bye

 

(4) app2上查看drbd挂载目录情况

[root@app2 ~]# df -h 
Filesystem                   Size  Used Avail Use% Mounted on 
/dev/mapper/vg_app2-lv_root   36G  5.0G   29G  16% / 
tmpfs                       1004M   29M  976M   3% /dev/shm 
/dev/sda1                    485M   39M  421M   9% /boot 
/dev/drbd0                   5.0G  249M  4.5G   6% /data 
[root@app2 ~]# 
[root@app2 ~]#

#说明:切换测试时有时会出现警告提示,影响真实状态查看,可以采用如下方式清除,提示哪个资源报警就清哪个,清理后,再次crm status查看状态显示正常。 
Failed actions: 
mystore_stop_0 on app1 'unknown error' (1): call=97, status=complete, last-rc-change='Tue Jan 26 14:39:21 2016', queued=6390ms, exec=0ms

[root@app1 ~]# crm resource cleanup mystore 
Cleaning up mystore on app1 
Cleaning up mystore on app2 
Waiting for 2 replies from the CRMd.. OK 
[root@app1 ~]#

 

5. 配置小结

在切换的过程中最大的问题就是DRBD的同步问题,必竟数据都在磁盘上,如果不同步就会造成数据不一致的问题,standby模拟切换其实不能真实模拟drbd的故障转移的。因为在故障转移之后,drbd被stop之后,从库接管主节点会从因stop之后会出现unknownn状态,这时候需要做会数据初始化同步。


本文出自 “koumm的linux技术博客” 博客,请务必保留此出处http://koumm.blog.51cto.com/703525/1769116

版权声明:本文内容由阿里云实名注册用户自发贡献,版权归原作者所有,阿里云开发者社区不拥有其著作权,亦不承担相应法律责任。具体规则请查看《阿里云开发者社区用户服务协议》和《阿里云开发者社区知识产权保护指引》。如果您发现本社区中有涉嫌抄袭的内容,填写侵权投诉表单进行举报,一经查实,本社区将立刻删除涉嫌侵权内容。

相关文章
MySql的详细安装说明
MySql的详细安装说明
20 0
Docker 安装 MySQL | 学习笔记
快速学习 Docker 安装 MySQL
13 0
CentOS7安装Lepus mysql监控系统
CentOS7安装Lepus mysql监控系统
8 0
【保姆级】docker安装MySQL主从复制
【保姆级】docker安装MySQL主从复制
8 0
Docker 安装 MySQL|学习笔记
快速学习 Docker 安装 MySQL
20 0
mysql安装出现应用程序无法正常启动(oxc000007b)的解决方案
原文:mysql安装出现应用程序无法正常启动(oxc000007b)的解决方案 版权声明:本文为博主原创文章,未经博主允许不得转载。 https://blog.
2254 0
文章
问答
文章排行榜
最热
最新
相关电子书
更多
MySQL MGR 8.0高可用实战
立即下载
云原生的 MySQL 托管服务架构及读写分离的优化(PHP)
立即下载
从理论到实践,深度解析MySQL Group Replication
立即下载