Haproxy+keepalived+apache
一、拓扑图：
二、编译安装haproxy（两台机器一样安装）
解压：tar zxvf haproxy-1.6.4.tar.gz
编译：注意：下边的等号前边的参数必须大写
cd haproxy-1.6.4
make TARGET=linux26 ARCH=x86_64 PREFIX=/usr/local/haproxy
make install PREFIX=/usr/local/haproxy
安装后，创建配置文件和启动文件
mkdir -p /usr/local/haproxy/etc/haproxy
cp examples/acl-content-sw.cfg/usr/local/haproxy/etc/haproxy/haproxy.cfg
cp examples/haproxy.init /etc/init.d/haproxy
chmod +x /etc/init.d/haproxy
修改启动文件：
vi /etc/init.d/haproxy
修改BIN、CFG路径
BIN=/usr/local/haproxy/sbin/$BASENAME
CFG=/usr/local/etc/$BASENAME/$BASENAME.cfg
三、编辑配置文件（两台机器一样）
cd /usr/local/haproxy/etc/haproxy
cp haproxy.cfg haproxy.cfg.bak
vi haproxy.cfg
# This sampleconfiguration makes extensive use of the ACLs. It requires
# HAProxyversion 1.3.12 minimum.
global
log localhost local3
maxconn 250
uid 71
gid 71
chroot /usr/local/haproxy
pidfile /var/run/haproxy.pid
daemon
quiet
frontendhttp-in
bind :80
mode http
log global
clitimeout 30000
option httplog
option dontlognull
#option logasap
option httpclose
maxconn 100
stats refresh 30s
stats uri /stats
stats realm linuxidc-test-Haproxy
stats auth admin:admin123
stats hide-version
capture request header Host len 20
capture request header User-Agent len 16
capture request header Content-Length len 10
capture request header Referer len 20
capture response header Content-Lengthlen 10
# block any unwanted source IPaddresses or networks
acl forbidden_src src 0.0.0.0/7 224.0.0.0/3
acl forbidden_src src_port 0:1023
block if forbidden_src
# block requests beginning with http://on wrong domains
acl dangerous_pfx url_beg -i http://
acl valid_pfx url_reg -i ^http://[^/]*1wt\.eu/
block if dangerous_pfx !valid_pfx
# block apache chunk exploit, ...
acl forbidden_hdrshdr_sub(transfer-encoding) -i chunked
acl forbidden_hdrs hdr_beg(host) -i apache- localhost
# ... some HTTP content smugling andother various things
acl forbidden_hdrs hdr_cnt(host) gt 1
acl forbidden_hdrshdr_cnt(content-length) gt 1
acl forbidden_hdrshdr_val(content-length) lt 0
acl forbidden_hdrshdr_cnt(proxy-authorization) gt 0
block if forbidden_hdrs
# block annoying worms that fill thelogs...
acl forbidden_uris url_reg -i.*(\.|%2e)(\.|%2e)(%2f|%5c|/|\\\\)
acl forbidden_uris url_sub -i %00<script xmlrpc.php
acl forbidden_uris path_end -i/root.exe /cmd.exe /default.ida /awstats.pl .asp .dll
# block other common attacks (awstats,manual discovery...)
acl forbidden_uris path_dir -i chatmain.php read_dump.php viewtopic.php phpbb sumthin horde _vti_bin M
SOffice
acl forbidden_uris url_reg -i(\.php\?temppath=|\.php\?setmodules=|[=:]http://)
block if forbidden_uris
# we rewrite the "options"request so that it only tries '*', and we
# only report GET, HEAD, POST andOPTIONS as valid methods
reqirep ^OPTIONS\ /.*HTTP/1\.[01]$ OPTIONS\\\*\ HTTP/1.0
rspirep ^Allow:\ .* Allow:\ GET,\ HEAD,\POST,\ OPTIONS
acl web hdr_beg(host) -i www.abc.com
use_backend www if web
backend www
mode http
#source 192.168.11.13:0
balance roundrobin
cookie SERVERID
server web01 192.168.1.13:80 checkinter 30000 fall 3 weight 10
server web02 192.168.1.14:80 checkinter 30000 fall 3 weight 10
# long timeout to support connectionqueueing
contimeout 20000
srvtimeout 20000
fullconn 100
redispatch
retries 3
option httpchk HEAD /
option forwardfor
option checkcache
option httpclose
# allow other syntactically validrequests, and block any other method
acl valid_method method GET HEAD POSTOPTIONS
block if !valid_method
block if HTTP_URL_STAR !METH_OPTIONS
block if !HTTP_URL_SLASH !HTTP_URL_STAR!HTTP_URL_ABS
# remove unnecessary precisions on theserver version. Let's say
# it's an apache under Unix on theFormilux Distro.
rspidel ^Server:\
rspadd Server:\ Apache\ (Unix;\Formilux/0.1.8)
# end ofdefaults
配置日志相关步骤
haproxy.cfg 上边已经配置
log localhost local3
vi /etc/rsyslog.conf
去掉#号
$ModLoad imudp
$UDPServerRun 514
在local7.*下边添加以下内容：
local3.* /var/log/haproxy/haproxy.log
vi /etc/sysconfig/rsyslog
修改为：
SYSLOGD_OPTIONS="-r -m 0"
重启rsyslog和haproxy服务service rsyslog restart
service haproxy restart
日志文件：/var/log/haproxy/haproxy.log
查看haproxy状态信息http://ip/stats 用户密码：admin:admin123
四、Web01和web02安装httpd
yum –y install httpd
分别建立配置文件:
Web01: vi /var/www/html/index.html
Wo shi 13.
Web02: vi /var/www/html/index.html
Wo shi 14.
两台都执行以下配置：
关闭selinux
vi /etc/sysconfig/selinux
SELINUX=disabled
重启
service iptables stop
chkconfig iptables off
chkconfig httpd on
service httpd start
浏览器测试是否都能打开web01和web02
五、编译安装keepalived
安装相关包：
yum -y install openssl openssl-devel
解压：
tar zxvf keepalived-1.2.20.tar.gz
编译
cd keepalived-1.2.20
./configure --prefix=/usr/local/keepalived1.2.20
make
make install
配置启动文件：
cd /usr/local/keepalived1.2.20/
cp etc/rc.d/init.d/keepalived /etc/init.d/
vi /etc/init.d/keepalived
修改三处：
. /usr/local/keepalived1.2.20/etc/sysconfig/keepalived
config="/usr/local/keepalived1.2.20/etc/keepalived/keepalived.conf"
daemon keepalived -D -f $config
配置keepalived.conf文件
cd etc/keepalived/
备份：cp keepalived.conf keepalived.conf.bak
vi keepalived.conf（注意两个配置文件有所不同）
192.168.0.11的keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
506@qq.com
}
notification_email_from postmaster@it.com
smtp_server mail.it.com
smtp_connect_timeout 30
router_id LVS_01
}
vrrp_script chk_haproxy {
script "/usr/local/keepalived1.2.20/check_haproxy.sh"
interval 2
weight 2
}
vrrp_instance VI_1 {
state MASTER
interface eth2
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.222/24
}
}
192.168.0.12的keepalived.conf
! Configuration File for keepalived
global_defs {
notification_email {
506@qq.com
}
notification_email_from postmaster@it.com
smtp_server mail.it.com
smtp_connect_timeout 30
router_id LVS_01
}
vrrp_script chk_haproxy {
script "/usr/local/keepalived1.2.20/check_haproxy.sh"
interval 2
weight 2
}
vrrp_instance VI_1 {
state BACKUP
interface eth2
virtual_router_id 51
priority 99
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.0.222/24
}
}
ln -s/usr/local/keepalived1.2.20/sbin/keepalived /usr/sbin/
开启路由功能
net.ipv4.ip_forward= 1
开启IP转发功能
net.ipv4.ip_nonlocal_bind= 1
开启允许绑定非本机的IP
如果使用LVS的DR或者TUN模式结合Keepalived需要在后端真实服务器上特别设置两个arp相关的参数。这里也设置好。
net.ipv4.conf.lo.arp_ignore= 1
net.ipv4.conf.lo.arp_announce= 2
net.ipv4.conf.all.arp_ignore= 1
net.ipv4.conf.all.arp_announce= 2
创建防止haproxy服务关闭导致keepalived不自动切换脚本
cat /usr/local/keepalived1.2.20/check_haproxy.sh
#!/bin/bash
if [ $(ps-C haproxy --no-header | wc -l) -eq 0 ]; then
/etc/init.d/haproxy start
fi
sleep 2
if [ $(ps-C haproxy --no-header | wc -l) -eq 0 ]; then
/etc/init.d/keepalived stop
fi
启动服务
service keepalived restart
ip addr查看有没有创建vip
这时候备的keepalived是没有vip地址的：
当主keepalived断掉，备keepalived接管vip（这里停止服务模仿）
当keepalived切换的时候，ping会丢一个包：
-
当主keepalived关掉的时候，丢包：
-
-
当主keepalived恢复的时候，丢包：
-
六、Haproxy本机测试www.abc.com访问
由于是测试没有dns解析，临时做hosts解析记录：
测试：curl www.abc.com测试两次，实现轮询
七、客户端测试www.abc.com
Windows客户端测试，添加hosts记录
浏览器访问www.abc.com访问两次，也成功实现轮询
本文转自506554897 51CTO博客，原文链接：http://blog.51cto.com/506554897/1764842，如需转载请自行联系原作者
