control报文双向检测
H3C配置
interface GigabitEthernet0/0
port link-mode route
ip address 10.2.247.254 255.255.255.252
rip bfd enable ctrl
bfd min-transmit-interval 999
bfd min-receive-interval 999
CISCO配置
interface GigabitEthernet0/1/3.795
bfd interval 999 min_rx 999 multiplier 5
router rip
bfd all-interfaces
本文转自杰1992 51CTO博客，原文链接：http://blog.51cto.com/holger/2045184，如需转载请自行联系原作者
