NMP安装

跳过mysql的安装
rpm -ivh libjpeg-devel-6b-33.i386.rpm
rpm -ivh freetype-devel-2.1.9-1.i386.rpm
rpm -ivh libpng-devel-1.2.7-1.i386.rpm

====================================================================================
php的安装

安装PHP 5.2.14（FastCGI模式）
1、编译安装PHP 5.2.14所需的支持库：
tar zxvf libiconv-1.13.1.tar.gz
cd libiconv-1.13.1/
./configure --prefix=/usr/local
make
make install
cd ../

tar zxvf libmcrypt-2.5.8.tar.gz 
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../

tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../

ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config

tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../

tar zxvf php-5.2.14.tar.gz
gzip -cd php-5.2.14-fpm-0.5.14.diff.gz | patch -d php-5.2.14 -p1
cd php-5.2.14/
./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl --with-xmlrpc --enable-zip --enable-soap

make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/php/etc/php.ini
cd ../

编译安装PHP5扩展模块
tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make
make install
cd ../

tar jxvf eaccelerator-0.9.6.1.tar.bz2
cd eaccelerator-0.9.6.1/
/usr/local/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/php/bin/php-config
make
make install
cd ../

tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config --with-pdo-mysql=/usr/local/mysql
make
make install
cd ../

tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../

tar zxvf imagick-2.3.0.tgz
cd imagick-2.3.0/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make
make install
cd ../

修改php.ini文件
手工修改：查找/usr/local/php/etc/php.ini中的extension_dir = "./"
修改为extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/"
并在此行后增加以下几行，然后保存：
extension = "memcache.so"
extension = "pdo_mysql.so"
extension = "imagick.so"

　　再查找output_buffering = Off
修改为output_buffering = On

　　再查找; cgi.fix_pathinfo=0
修改为cgi.fix_pathinfo=0，防止Nginx文件类型错误解析漏洞。

　　自动修改：若嫌手工修改麻烦，可执行以下shell命令，自动完成对php.ini文件的修改：

sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#' /usr/local/php/etc/php.ini
sed -i 's#output_buffering = Off#output_buffering = On#' /usr/local/php/etc/php.ini
sed -i "s#; always_populate_raw_post_data = On#always_populate_raw_post_data = On#g" /usr/local/php/etc/php.ini
sed -i "s#; cgi.fix_pathinfo=0#cgi.fix_pathinfo=0#g" /usr/local/php/etc/php.ini

配置eAccelerator加速PHP：
mkdir -p /usr/local/eaccelerator_cache
vi /usr/local/php/etc/php.ini
按shift+g键跳到配置文件的最末尾，加上以下配置信息：
[eaccelerator]
zend_extension="/usr/local/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="64"
eaccelerator.cache_dir="/usr/local/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="3600"
eaccelerator.shm_prune_period="3600"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"

创建php-fpm配置文件（php-fpm是为PHP打的一个FastCGI管理补丁，可以平滑变更php.ini配置而无需重启php-cgi）：
在/usr/local/php/etc/目录中创建php-fpm.conf文件：
rm -f /usr/local/php/etc/php-fpm.conf
vi /usr/local/php/etc/php-fpm.conf
63行的注释去掉
66行的注释去掉
用www用户启动

注：/usr/local/php/sbin/php-fpm还有其他参数，包括：start|stop|quit|restart|reload|logrotate，修改php.ini后不重启php-cgi，重新加载配置文件使用reload
====================================================================================
nginx安装

创建www用户和组，
/usr/sbin/groupadd www
/usr/sbin/useradd -g www www
安装Nginx 0.8.46
安装Nginx所需的pcre库：
tar zxvf pcre-8.10.tar.gz
cd pcre-8.10/
./configure
make && make install
cd ../

tar zxvf nginx-0.8.46.tar.gz
cd nginx-0.8.46/
./configure --user=www --group=www --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module
make && make install
cd ../

====================================================================================
Memcache的服务器端

先安装libevent：
# tar zxvf libevent-1.2.tar.gz
# cd libevent-1.2
# ./configure –prefix=/usr
# make
# make install
测试libevent是否安装成功：
# ls -al /usr/lib | grep libevent
lrwxrwxrwx 1 root root 21 11?? 12 17:38 libevent-1.2.so.1 -> libevent-1.2.so.1.0.3
-rwxr-xr-x 1 root root 263546 11?? 12 17:38 libevent-1.2.so.1.0.3
-rw-r–r– 1 root root 454156 11?? 12 17:38 libevent.a
-rwxr-xr-x 1 root root 811 11?? 12 17:38 libevent.la
lrwxrwxrwx 1 root root 21 11?? 12 17:38 libevent.so -> libevent-1.2.so.1.0.3
都安装上了

安装memcached，同时需要安装中指定libevent的安装位置：
# cd /tmp
# tar zxvf memcached-1.2.0.tar.gz
# cd memcached-1.2.0
# ./configure –with-libevent=/usr
# make
# make install
如果中间出现报错，请仔细检查错误信息，按照错误信息来配置或者增加相应的库或者路径。
安装完成后会把memcached放到 /usr/local/bin/memcached

启动Memcache的服务器端：
# /usr/local/bin/memcached -d -m 10 -u root -l 192.168.0.200 -p 12000 -c 256 -P /tmp/memcached.pid

-d选项是启动一个守护进程，
-m是分配给Memcache使用的内存数量，单位是MB，我这里是10MB，
-u是运行Memcache的用户，我这里是root，
-l是监听的服务器IP地址，如果有多个地址的话，我这里指定了服务器的IP地址192.168.0.200，
-p是设置Memcache监听的端口，我这里设置了12000，最好是1024以上的端口，
-c选项是最大运行的并发连接数，默认是1024，我这里设置了256，按照你服务器的负载量来设定，
-P是设置保存Memcache的pid文件，我这里是保存在 /tmp/memcached.pid，

====================================================================================

优化Linux内核参数
vi /etc/sysctl.conf

# Add
net.ipv4.tcp_max_syn_backlog = 65536
net.core.netdev_max_backlog =  32768
net.core.somaxconn = 32768

net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216

net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2

net.ipv4.tcp_tw_recycle = 1
#net.ipv4.tcp_tw_len = 1
net.ipv4.tcp_tw_reuse = 1

net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800

#net.ipv4.tcp_fin_timeout = 30
#net.ipv4.tcp_keepalive_time = 120
net.ipv4.ip_local_port_range = 1024  65535
使配置立即生效：
/sbin/sysctl -p

在不停止Nginx服务的情况下平滑变更Nginx配置
/usr/local/nginx/sbin/nginx -t
如果屏幕显示以下两行信息，说明配置文件正确：
the configuration file /usr/local/webserver/nginx/conf/nginx.conf syntax is ok
the configuration file /usr/local/webserver/nginx/conf/nginx.conf was tested successfully

平滑重启：/usr/local/nginx/sbin/nginx -s reload

编写每天定时切割Nginx日志的脚本
vi /usr/local/nginx/sbin/cut_nginx_log.sh
#!/bin/bash
# This script run at 00:00

# The Nginx logs path
logs_path="/usr/local/webserver/nginx/logs/"

mkdir -p ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/
mv ${logs_path}access.log ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/access_$(date -d "yesterday" +"%Y%m%d").log
kill -USR1 `cat /usr/local/webserver/nginx/nginx.pid`