企业级中大型网络部署方案
需求：
1，公司总部需要联网的节点数为150个节点
2，公司总部为内网用户提供文件共享服务器和OA服务器
3，公司总部能够访问internet，实现资源浏览和邮件收发
4，公司有一个分支机构，实现总部与分支机构通信（大量数据频繁传输）
5，公司有五个部门，按照行政机构划分VLAN，部门间可以相互通信
6, 保证网络的安全
7, 保证网络的可靠运行
1，公司总部需要联网的节点数为150个节点
2，公司总部为内网用户提供文件共享服务器和OA服务器
3，公司总部能够访问internet，实现资源浏览和邮件收发
4，公司有一个分支机构，实现总部与分支机构通信（大量数据频繁传输）
5，公司有五个部门，按照行政机构划分VLAN，部门间可以相互通信
6, 保证网络的安全
7, 保证网络的可靠运行
3560A:
Switch>en
Switch#vlan database
Switch(vlan)#vtp domain ITAT
Changing VTP domain name from NULL to ITAT
Switch(vlan)#vtp server
Device mode already VTP SERVER.
Switch(vlan)#vlan 2 name lei
VLAN 2 added:
Name: lei
Switch(vlan)#vlan 3 name gang
VLAN 3 added:
Name: gang
Switch(vlan)#vlan 4 name shen
VLAN 4 added:
Name: shen
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#show vtp status
Maximum VLANs supported locally : ITAT5
Number of existing VLANs : 8
VTP Operating Mode : Server
VTP Domain Name : ITAT
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x87 0x2C 0xFC 0x72 0x04 0xC1 0x93 0xD7
Configuration last modified by
0.0.0
.0 at 3-1-93 00:07:21
Local updater ID is
0.0.0
.0 (no valid interface found)
Switch#show vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
Gig0/1, Gig0/2
2 lei active
3 gang active
4 shen active
ITAT2 fddi-default active
ITAT3 token-ring-default active
ITAT4 fddinet-default active
ITAT5 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet ITAT001 1500 - - - - - 0 0
2 enet ITAT002 1500 - - - - - 0 0
3 enet ITAT003 1500 - - - - - 0 0
4 enet ITAT004 1500 - - - - - 0 0
ITAT2 enet 10ITAT2 1500 - - - - - 0 0
ITAT3 enet 10ITAT3 1500 - - - - - 0 0
ITAT4 enet 10ITAT4 1500 - - - - - 0 0
ITAT5 enet 10ITAT5 1500 - - - - - 0 0
Switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int fa0/4
Switch(config-if)#swit
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 4
Switch(config-if)#exit
Switch(config)#int fa0/3
Switch(config-if)#switchport mode trunk
witch(config-if)#exit
Switch(config)#ip routing
Switch(config)#int vlan 2
tate to upSwitch(config-if)#ip addr 192.168.20.1 255.255.255.0
Switch(config-if)#no shut
Switch(config-if)#int vlan 3
state to upSwitch(config-if)#ip addr 192.168.30.1 255.255.255.0
Switch(config-if)#no shut
Switch(config-if)#exit
Switch(config)#int vlan 4
state to upSwitch(config-if)#ip addr 192.168.40.1 255.255.255.0
Switch(config-if)#no shut
Switch(config-if)#exit
Switch(config)#int fa0/5
Switch(config-if)#no switc
Switch(config-if)#no switchport
Switch(config-if)#ip addr 192.168.10.1 255.255.255.0
Switch(config-if)#no shut
Switch(config-if)#exit
Switch(config)#ip route
0.0.0
.0 0.0.0.0 192.168.10.2
Switch(config)#router rip
Switch(config-router)#ver 2
Switch(config-router)#net 192.168.10.0
Switch(config-router)#net 192.168.20.0
Switch(config-router)#net 192.168.30.0
Switch(config-router)#net 192.168.40.0
2960A:
Switch>en
Switch#vlan database
Switch(vlan)#vtp domain ITAT
Domain name already set to ITAT.
Switch(vlan)#vtp client
Setting device to VTP CLIENT mode.
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#show vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/4, Fa0/5
Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/10, Fa0/11, Fa0/12, Fa0/13
Fa0/14, Fa0/15, Fa0/16, Fa0/17
Fa0/18, Fa0/19, Fa0/20, Fa0/21
Fa0/22, Fa0/23, Fa0/24, Gig1/1
Gig1/2
2 lei active
3 gang active
4 shen active
ITAT2 fddi-default active
ITAT3 token-ring-default active
ITAT4 fddinet-default active
ITAT5 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet ITAT001 1500 - - - - - 0 0
2 enet ITAT002 1500 - - - - - 0 0
3 enet ITAT003 1500 - - - - - 0 0
4 enet ITAT004 1500 - - - - - 0 0
ITAT2 enet 10ITAT2 1500 - - - - - 0 0
ITAT3 enet 10ITAT3 1500 - - - - - 0 0
ITAT4 enet 10ITAT4 1500 - - - - - 0 0
ITAT5 enet 10ITAT5 1500 - - - - - 0 0
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int fa0/3
Switch(config-if)#switchport mode trunk
Switch(config-if)#exit
Switch(config)#exit
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int fa0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 2
Switch(config-if)#int fa0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 3
Switch(config)#exit
ISP:
Router>en
Router#config t
Router(config)#int s0/0
Router(config-if)#ip addr 202.110.ITAT.2 255.255.255.0
Router(config-if)#encap hdlc
Router(config-if)#no shut
2621B:
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip addr 192.168.50.2 255.255.255.0
Router(config-if)#no shut
Router(config-if)#int s0/1
Router(config-if)#ip addr 202.110.101.2 255.255.255.0
Router(config-if)#encap hdlc
Router(config-if)#no shut
Router(config-if)#router rip
Router(config-router)#ver 2
Router(config-router)#net 192.168.50.0
Router(config-router)#net 202.110.101.0
3560B:
Switch>en
Switch#vlan database
Switch(vlan)#vtp domain ITAT
Changing VTP domain name from NULL to ITAT
Switch(vlan)#vtp server
Device mode already VTP SERVER.
Switch(vlan)#vlan 6 name aa
VLAN 6 added:
Name: aa
Switch(vlan)#vlan 7 name bb
VLAN 7 added:
Name: bb
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#show vtp status
VTP Version : 2
Configuration Revision : 2
Maximum VLANs supported locally : ITAT5
Number of existing VLANs : 7
VTP Operating Mode : Server
VTP Domain Name : ITAT
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x7D 0x03 0xA8 0x8E 0xA6 0x30 0x26 0x20
Configuration last modified by
0.0.0
.0 at 3-1-93 00:29:40
Local updater ID is
0.0.0
.0 (no valid interface found)
Switch#show vlan
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
Gig0/1, Gig0/2
6 aa active
7 bb active
ITAT2 fddi-default active
ITAT3 token-ring-default active
ITAT4 fddinet-default active
ITAT5 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet ITAT001 1500 - - - - - 0 0
6 enet ITAT006 1500 - - - - - 0 0
7 enet ITAT007 1500 - - - - - 0 0
ITAT2 enet 10ITAT2 1500 - - - - - 0 0
ITAT3 enet 10ITAT3 1500 - - - - - 0 0
ITAT4 enet 10ITAT4 1500 - - - - - 0 0
ITAT5 enet 10ITAT5 1500 - - - - - 0 0
^
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int fa0/3
Switch(config-if)#switchport mode trunk
Switch(config)#ip routing
Switch(config)#int vlan 6
state to upSwitch(config-if)#ip addr 192.168.60.1 255.255.255.0
Switch(config-if)#no shut
Switch(config-if)#exit
Switch(config)#int vlan 7
state to upSwitch(config-if)#ip addr 192.168.70.1 255.255.255.0
Switch(config-if)#no shut
Switch(config-if)#int fa0/5
Switch(config-if)#no swit
Switch(config-if)#no switchport
Switch(config-if)#no shut
Switch(config-if)#exit
Switch(config)#router rip
Switch(config-router)#ver 2
Switch(config-router)#net 192.168.50.0
Switch(config-router)#net 192.168.60.0
Switch(config-router)#net 192.168.70.0
Switch(config-router)#exit
2960B:
Switch#config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#int fa0/1
Switch(config-if)#swit
Switch(config-if)#switchport mode access
Switch(config-if)#swit
Switch(config-if)#switchport access vlan 6
Switch(config-if)#int fa0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 7
Switch(config-if)#exit
Switch(config)#
本文转自shenleigang 51CTO博客，原文链接：
http://blog.51cto.com/shenleigang/164384
，如需转载请自行联系原作者
