MikroTik RouterOS v2.9.7 Incl. Crack.iso安装中注意的是选择a全部software 按i（install)安装，3.0版本不要安装xen否则启动不了
安装好之后密码为admin无密码，以下就是配置web ip地址网关和dns等步骤，配置好之后就可以用winbox webox和ssh了。
[admin@MikroTik] > interface print //显示接口类型
Flags: D - dynamic, X - disabled, R
- running, S - slave
# NAME TYPE MTU
0 R w ether 1500
1 R l ether 1500
[admin@MikroTik] > interface set 0 name=wan //设置接口为进线名字为wan
[admin@MikroTik] > interface set 1 name=lan //设置接口为进线名字为lan
[admin@MikroTik] > interface pri //显示接口名字
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU
0 R wan ether 1500
1 R lan
[admin@MikroTik] > ip address add address=192.168.40.xx/24 interface=wan //设置接口WAN ip子网掩码255.255.255.0
[admin@MikroTik] > ip address add address=192.168.40.xx/24 interface=lan ////设置接口LAN ip子网掩码255.255.255.0
[admin@MikroTik] > ip address print //查看ip地址
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK BROADCAST INTERFACE
0 192.168.40.xx/24 192.168.40.0 192.168.40.255 wan
1 192.168.40.xx/24 192.168.40.0 192.168.40.255 lan
[admin@MikroTik] > ip route print //查看路由信息
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC G GATEWAY DISTANCE IN..
0 A S 0.0.0.0/0 r 192.168.40.xx 1 lan
1 ADC 192.168.40.0/24 192.168.40.xx 0 lan
2 DC 192.168.40.0/24 192.168.40.xx 0 wan
[admin@MikroTik] > ip route remove 0 //删除0号lan
[admin@MikroTik] > ip route pri //查看路由信息
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC G GATEWAY DISTANCE IN..
0 ADC 192.168.40.0/24 192.168.40.95 0 lan
1 DC 192.168.40.0/24 192.168.40.62 0 wan
[admin@MikroTik] > ip route add gateway=192.168.40.xx //设置网关地址ip
[admin@MikroTik] > ip route pri //查看路由信息
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
# DST-ADDRESS PREF-SRC G GATEWAY DISTANCE IN..
0 A S 0.0.0.0/0 r 192.168.40.xx 1 lan
1 ADC 192.168.40.0/24 192.168.40.xx 0 lan
2 DC 192.168.40.0/24 192.168.40.xx 0 wan
[admin@MikroTik] > ip dns set primary-dns=202.101.172.35 secondary-dns=202.101.172.46 allow-remote-requests=yes //配置dns ip
[admin@MikroTik] > ip dns print //显示配置dns信息。
primary-dns: 202.101.172.35
secondary-dns: 202.101.172.46
allow-remote-requests: yes
max-udp-packet-size: 512
cache-size: 2048KiB
cache-max-ttl: 1w
cache-used: 5KiB
[admin@MikroTik] > ip firewall nat add chain=srcnat action=masquerade
本文转自zh888 51CTO博客，原文链接：http://blog.51cto.com/zh888/957194，如需转载请自行联系原作者
