转自：http://www.blog.chinaunix.net/uid-20564848-id-73878.html
linux下c程序调用reboot函数实现直接重启
当然你也可以直接调用system("reboot"),但是这里完全基于库函数来实现,不依赖于/sbin/reboot这个外部程序
这里reboot()的其他命令,比如RB_POWER_OFF,并不能保证关闭计算机电源.
#include <unistd.h>
#include <sys/reboot.h>
int main()
{
sync(); // 同步磁盘数据,将缓存数据回写到硬盘,以防数据丢失[luther.gliethttp]
return reboot(RB_AUTOBOOT);
}
luther@gliethttp:~vim /usr/include/sys/reboot.h /* Copyright (C) 1996, 1997, 1998, 1999 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. The GNU C Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with the GNU C Library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. */ /* This file should define RB_* macros to be used as flag bits in the argument to the `reboot' system call. */ #ifndef _SYS_REBOOT_H #define _SYS_REBOOT_H 1 #include <features.h> /* Perform a hard reset now. */ #define RB_AUTOBOOT 0x01234567 /* Halt the system. */ #define RB_HALT_SYSTEM 0xcdef0123 /* Enable reboot using Ctrl-Alt-Delete keystroke. */ #define RB_ENABLE_CAD 0x89abcdef /* Disable reboot using Ctrl-Alt-Delete keystroke. */ #define RB_DISABLE_CAD 0 /* Stop system and switch power off if possible. */ #define RB_POWER_OFF 0x4321fedc __BEGIN_DECLS /* Reboot or halt the system. */ extern int reboot (int __howto) __THROW; __END_DECLS #endif /* _SYS_REBOOT_H */ luther@gliethttp:~man 2 reboot
REBOOT(2) Linux Programmer’s Manual REBOOT(2)
NAME
reboot - reboot or enable/disable Ctrl-Alt-Del
SYNOPSIS
/* For libc4 and libc5 the library call and the system call
are identical, and since kernel version 2.1.30 there are
symbolic names LINUX_REBOOT_* for the constants and a
fourth argument to the call: */
#include <unistd.h>
#include <linux/reboot.h>
int reboot(int magic, int magic2, int cmd, void *arg);
/* Under glibc some of the constants involved have gotten
symbolic names RB_*, and the library call is a 1-argument
wrapper around the 3-argument system call: */
#include <unistd.h>
#include <sys/reboot.h>
int reboot(int cmd);
DESCRIPTION
The reboot() call reboots the system, or enables/disables the reboot
keystroke (abbreviated CAD, since the default is Ctrl-Alt-Delete; it
can be changed using loadkeys(1)).
This system call will fail (with EINVAL) unless magic equals
LINUX_REBOOT_MAGIC1 (that is, 0xfee1dead) and magic2 equals
LINUX_REBOOT_MAGIC2 (that is, 672274793). However, since 2.1.17 also
LINUX_REBOOT_MAGIC2A (that is, 85072278) and since 2.1.97 also
LINUX_REBOOT_MAGIC2B (that is, 369367448) and since 2.5.71 also
LINUX_REBOOT_MAGIC2C (that is, 537993216) are permitted as value for
magic2. (The hexadecimal values of these constants are meaningful.)
The cmd argument can have the following values:
LINUX_REBOOT_CMD_RESTART
(RB_AUTOBOOT, 0x1234567). The message "Restarting system." is
printed, and a default restart is performed immediately. If not
preceded by a sync(2), data will be lost.
LINUX_REBOOT_CMD_HALT
(RB_HALT_SYSTEM, 0xcdef0123; since 1.1.76). The message "System
halted." is printed, and the system is halted. Control is given
to the ROM monitor, if there is one. If not preceded by a
sync(2), data will be lost.
LINUX_REBOOT_CMD_POWER_OFF
(0x4321fedc; since 2.1.30). The message "Power down." is
printed, the system is stopped, and all power is removed from
the system, if possible. If not preceded by a sync(2), data
will be lost.
LINUX_REBOOT_CMD_RESTART2
(0xa1b2c3d4; since 2.1.30). The message "Restarting system with
command '%s'" is printed, and a restart (using the command
string given in arg) is performed immediately. If not preceded
by a sync(2), data will be lost.
LINUX_REBOOT_CMD_CAD_ON
(RB_ENABLE_CAD, 0x89abcdef). CAD is enabled. This means that
the CAD keystroke will immediately cause the action associated
with LINUX_REBOOT_CMD_RESTART.
LINUX_REBOOT_CMD_CAD_OFF
(RB_DISABLE_CAD, 0). CAD is disabled. This means that the CAD
keystroke will cause a SIGINT signal to be sent to init (process
1), whereupon this process may decide upon a proper action
(maybe: kill all processes, sync, reboot).
Only the superuser may call reboot().
The precise effect of the above actions depends on the architecture.
For the i386 architecture, the additional argument does not do anything
at present (2.1.122), but the type of reboot can be determined by ker‐
nel command-line arguments ("reboot=...") to be either warm or cold,
and either hard or through the BIOS.
RETURN VALUE
For the values of cmd that stop or restart the system, a successful
call to reboot() does not return. For the other cmd values, zero is
returned on success. In all cases, -1 is returned on failure, and
errno is set appropriately.
ERRORS
EFAULT Problem with getting userspace data under
LINUX_REBOOT_CMD_RESTART2.
EINVAL Bad magic numbers or cmd.
EPERM The calling process has insufficient privilege to call reboot();
the CAP_SYS_BOOT capability is required.
CONFORMING TO
reboot() is Linux-specific, and should not be used in programs intended
to be portable.
SEE ALSO
sync(2), bootparam(7), capabilities(7), ctrlaltdel(8), halt(8),
reboot(8)
COLOPHON
This page is part of release 3.01 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 2008-02-11 REBOOT(2)
vim /usr/include/sys/reboot.h
--------------------------------------------------
#define RB_AUTOBOOT 0x01234567
#define RB_HALT_SYSTEM 0xcdef0123
#define RB_ENABLE_CAD 0x89abcdef
#define RB_DISABLE_CAD 0
#define RB_POWER_OFF 0x4321fedc
1 sys_reboot() -->
2 kernel_restart() -->
3 kernel_restart_prepare()
4 machine_restart()
linux-2.6.21.7/include/linux/reboot.h
--------------------------------------------
#define LINUX_REBOOT_CMD_RESTART 0x01234567
#define LINUX_REBOOT_CMD_HALT 0xCDEF0123
#define LINUX_REBOOT_CMD_CAD_ON 0x89ABCDEF
#define LINUX_REBOOT_CMD_CAD_OFF 0x00000000
#define LINUX_REBOOT_CMD_POWER_OFF 0x4321FEDC
#define LINUX_REBOOT_CMD_RESTART2 0xA1B2C3D4
#define LINUX_REBOOT_CMD_SW_SUSPEND 0xD000FCE2
#define LINUX_REBOOT_CMD_KEXEC 0x45584543
本文转自张昺华-sky博客园博客，原文链接：http://www.cnblogs.com/sky-heaven/p/5263181.html，如需转载请自行联系原作者
