原创作品。从 “深蓝blog” 博客，欢迎转载，请务必注明转载如下源。否则追究其版权责任。
深蓝的blog：http://blog.csdn.net/huangyanlong/article/details/40181661
1. 主机配置
[root@hyltest /]# vi /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.56.61 hyltest
~
~
[root@hyltest /]# vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
NM_CONTROLLED="yes"
ONBOOT="yes"
HWADDR=08:00:27:97:CF:CA
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.56.61
PREFIX=24
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="System eth0"
UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
~
~
[root@hyltest /]# vi /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=hyltest
~
~
#vi serverstop.sh
--编写关闭服务脚本
chkconfig iptables off chkconfig ip6tables off chkconfig cups off chkconfig firstboot off chkconfig wpa_supplicant off chkconfig postfix off sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config sed -i 's/^GSSAPIAuthentication yes$/GSSAPIAuthentication no/' /etc/ssh/sshd_config sed -i 's/#UseDNS yes/UseDNS no/' /etc/ssh/sshd_config
--运行关闭服务脚本
2. 安装包等
官方文档要求安装的包：
The following packages (or later versions) must be installed:
binutils-2.20.51.0.2-5.11.el6.i686
compat-libcap1-1.10-1.i686
compat-libstdc++-33-3.2.3-69.el6.i686
gcc-4.4.4-13.el6.i686
gcc-c++-4.4.4-13.el6.i686
glibc-2.12-1.7.el6.i686
glibc-devel-2.12-1.7.el6.i686
ksh
libgcc-4.4.4-13.el6.i686
libstdc++-4.4.4-13.el6.i686
libstdc++-devel-4.4.4-13.el6.i686
libaio-0.3.107-10.el6.i686
libaio-devel-0.3.107-10.el6.i686
make-3.81-19.el6.i686
sysstat-9.0.4-11.el6.i686
依据官方文档要求，上传对应的包，例如以下：
#vi rpm.sh
--编写安装rpm包脚本
rpm -ivh binutils-2.20.51.0.2-5.28.el6.x86_64.rpm rpm -ivh binutils-devel-2.20.51.0.2-5.28.el6.i686.rpm rpm -ivh binutils-devel-2.20.51.0.2-5.28.el6.x86_64.rpm rpm -ivh compat-libcap1-1.10-1.i686.rpm rpm -ivh compat-libcap1-1.10-1.x86_64.rpm rpm -ivh compat-libstdc++-296-2.96-144.el6.i686.rpm rpm -ivh compat-libstdc++-33-3.2.3-69.el6.i686.rpm rpm -ivh compat-libstdc++-33-3.2.3-69.el6.x86_64.rpm rpm -ivh gcc-4.4.6-3.el6.x86_64.rpm rpm -ivh gcc-c++-4.4.6-3.el6.x86_64.rpm rpm -ivh glibc-2.12-1.47.el6.i686.rpm rpm -ivh glibc-2.12-1.47.el6.x86_64.rpm rpm -ivh glibc-devel-2.12-1.47.el6.i686.rpm rpm -ivh glibc-devel-2.12-1.47.el6.x86_64.rpm rpm -ivh ksh-20100621-12.el6.x86_64.rpm rpm -ivh libaio-0.3.107-10.el6.i686.rpm rpm -ivh libaio-0.3.107-10.el6.x86_64.rpm rpm -ivh libaio-devel-0.3.107-10.el6.i686.rpm rpm -ivh libaio-devel-0.3.107-10.el6.x86_64.rpm rpm -ivh libgcc-4.4.6-3.el6.i686.rpm rpm -ivh libgcc-4.4.6-3.el6.x86_64.rpm rpm -ivh libstdc++-4.4.6-3.el6.i686.rpm rpm -ivh libstdc++-4.4.6-3.el6.x86_64.rpm rpm -ivh libstdc++-devel-4.4.6-3.el6.i686.rpm rpm -ivh libstdc++-devel-4.4.6-3.el6.x86_64.rpm rpm -ivh make-3.81-19.el6.x86_64.rpm rpm -ivh sysstat-9.0.4-18.el6.x86_64.rpm
--运行安装rpm包脚本
配置yum
參考其他文章，訪问地址例如以下：
http://blog.csdn.net/huangyanlong/article/details/38614971
#vi yum.sh
--编写yum安装脚本。脚本里使用yum安装的与rpm包单独安装的有反复的，但没关系遇到已安装过的包时会自己主动检查版本号跳过安装
yum -y install autoconf yum -y install automake yum -y install binutils-devel yum -y install bison yum -y install cpp yum -y install dos2unix yum -y install ftp yum -y install gcc yum -y install gcc-c++ yum -y install lrzsz yum -y install python-devel yum -y install compat-db yum -y install compat-db42 yum -y install compat-db43 yum -y install compat-gcc-34 yum -y install compat-gcc-34-c++ yum -y install compatlibstdc++-33 yum -y install glibc-* yum -y install glibc-*.i686 yum -y install libXpm-*.i686 yum -y install libXp.so.6 yum -y install libXt.so.6 yum -y install libXtst.so.6 yum -y install libgcc_s.so.1 yum -y install ksh yum -y install libXp yum -y install libaio-devel yum -y install numactl yum -y install numactl-devel yum -y install unixODBC yum -y install unixODBC-devel
--运行yum安装脚本
3. 加入用户、组、文件夹
[root@hyltest /]# groupadd oinstall
--加入oinstall组
[root@hyltest /]# groupadd dba
--加入dba组
[root@hyltest /]# useradd -g oinstall -G dba oracle
--加入oracle用户，主组为oinstall，属组为dba
[root@hyltest /]# passwd oracle
--为oracle用户创建password
Changing password for user oracle.
New password:
BAD PASSWORD: it is based on a dictionary word
BAD PASSWORD: is too simple
Retype new password:
passwd: all authentication tokens updated successfully.
[root@hyltest /]# id oracle
--查看oracle的id值
uid=501(oracle) gid=602(oinstall) groups=602(oinstall),603(dba)
[root@hyltest /]# mkdir -p /u01/app/oracle
--创建oracle相关文件夹
[root@hyltest /]# mkdir -p /u01/app/oraInventory
[root@hyltest /]# chown -R oracle:oinstall /u01/app
--将文件夹归属于oracle及其相关组
[root@hyltest /]# chmod -R 775 /u01/app
--赋予oracle对相关文件夹的訪问权限
4. 配置内核參数等
[root@hyltest /]# vi /etc/sysctl.conf
--改动内核參数
kernel.shmall = 4294967296
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65500
net.core.rmem_default = 4194304
net.core.wmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_max = 262144
~
[root@hyltest /]# sysctl –p
--使改动的内核參数生效
net.ipv4.ip_forward = 0
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.default.accept_source_route = 0
kernel.sysrq = 0
kernel.core_uses_pid = 1
net.ipv4.tcp_syncookies = 1
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-iptables = 0
net.bridge.bridge-nf-call-arptables = 0
kernel.msgmnb = 65536
kernel.msgmax = 65536
kernel.shmmax = 68719476736
kernel.shmall = 4294967296
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65500
net.core.rmem_default = 4194304
net.core.wmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_max = 262144
[oracle@hyltest ~]$ vi .bash_profile
--改动oracle环境变量
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=$ORACLE_BASE/product/11.2.0/db_1
ORACLE_SID=xcky
PATH=$PATH:$HOME/bin:$ORACLE_HOME/bin
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/usr/lib
export ORACLE_BASE ORACLE_HOME ORACLE_SID PATH LD_LIBRARY_PATH
~
~
[root@hyltest ~]# vi /etc/security/limits.conf
--改动系统限制
oracle soft nproc 2047
oracle hard nproc 16384
oracle soft nofile 1024
oracle hard nofile 65536
~
[root@hyltest ~]# vi /etc/pam.d/login
session required /lib/security/pam_limits.so
session required pam_limits.so
~
~
# vi /etc/profile
--加入下面參数
if [ $USER = "oracle" ]; then
if [ $SHELL = "/bin/ksh" ]; then
ulimit -p 16384
ulimit -n 65536
else
ulimit -u 16384 -n 65536
fi
fi
5. 解压安装包
解压
例：解压.zip
# unzip p13390677_112040_Linux-x86-64_1of7.zip
# unzip p13390677_112040_Linux-x86-64_2of7.zip
6. 图形化安装oracle11g
使用X-manager远程调用图形化界面。例如以下图中指令：
操作例如以下：
[root@hyltest ~]# xhost +
--开启图形化功能
access control disabled, clients can connect from any host
[root@hyltest ~]# su - oracle
[oracle@hyltest ~]$ cd /soft
[oracle@hyltest soft]$ ls
database rpm11 rpm11odbc rpm.sh serverstop.sh yum.sh
[oracle@hyltest soft]$ cd database
[oracle@hyltest database]$ ls
install response runInstaller stage
readme.html rpm sshsetup welcome.html
[oracle@hyltest database]$ ./runInstaller
--运行安装程序
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 15998 MB Passed
Checking swap space: must be greater than 150 MB. Actual 4095 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2014-10-15_08-33-36PM. Please wait ...[oracle@hyltest database]$ You can find the log of this install session at:
/u01/app/oraInventory/logs/installActions2014-10-15_08-33-36PM.log
进入到图形化后，依照提示逐步进行就可以，參考步骤例如以下：
[root@hyltest ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[root@hyltest ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[root@hyltest ~]# /u01/app/oracle/product/11.2.0/db_1/root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/oracle/product/11.2.0/db_1
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Finished product-specific root actions.
7. dbca建库
[oracle@hyltest database]$ dbca
8. netca配置监听
[oracle@hyltest database]$ netca
9. 配置开机实例自启动
[root@hyltest ~]# vi /etc/rc.d/rc.local
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
su - oracle -c "/u01/app/oracle/product/11.2.0/db_1/bin/dbstart start"
su - oracle -c "/u01/app/oracle/product/11.2.0/db_1/bin/lsnrctl start"
~
~
~
~
[root@hyltest ~]# vi /etc/oratab
# This file is used by ORACLE utilities. It is created by root.sh
# and updated by either Database Configuration Assistant while creating
# a database or ASM Configuration Assistant while creating ASM instance.
# A colon, ':', is used as the field terminator. A new line terminates
# the entry. Lines beginning with a pound sign, '#', are comments.
#
# Entries are of the form:
# $ORACLE_SID:$ORACLE_HOME:<N|Y>:
#
# The first and second fields are the system identifier and home
# directory of the database respectively. The third filed indicates
# to the dbstart utility that the database should , "Y", or should not,
# "N", be brought up at system boot time.
#
# Multiple entries with the same $ORACLE_SID are not allowed.
#
#
xcky:/u01/app/oracle/product/11.2.0/db_1:Y
~
"/etc/oratab" 23L, 784C written
原创作品，出自 “深蓝的blog” 博客，欢迎转载，转载时请务必注明下面出处，否则追究版权法律责任。
深蓝的blog：http://blog.csdn.net/huangyanlong/article/details/40181661
本文转自mfrbuaa博客园博客，原文链接：http://www.cnblogs.com/mfrbuaa/p/5030868.html，如需转载请自行联系原作者
