fdisk添加分区引起的Linux Error: 22: Invalid argument

[root@oracle-server ~]# echo "- - -" > /sys/class/scsi_host/host0/scan

[root@oracle-server ~]# fdisk -l

Disk /dev/sda: 584.6 GB, 584646328320 bytes

255 heads, 63 sectors/track, 71079 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System

/dev/sda1   *           1       19441   156151808   83  Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2           19441       44937   204796672   83  Linux

Partition 2 does not end on cylinder boundary.

/dev/sda3           44937       57685   102398336   83  Linux

Partition 3 does not end on cylinder boundary.

/dev/sda4           57685       71080   107595584    5  Extended

Partition 4 does not end on cylinder boundary.

/dev/sda5           57685       70433   102398336   83  Linux

/dev/sda6           70433       70949     4144768   82  Linux swap

/dev/sda7           70949       71080     1052288   83  Linux

Disk /dev/sdb: 146.1 GB, 146156158976 bytes

2 heads, 24 sectors/track, 5947109 cylinders

Units = cylinders of 48 * 512 = 24576 bytes

   Device Boot      Start         End      Blocks   Id  System

/dev/sdb1               3     5947064   142729472   83  Linux

Disk /dev/sdc: 107.3 GB, 107374182400 bytes

255 heads, 63 sectors/track, 13054 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System

/dev/sdc1               1       13054   104856223+  83  Linux

Disk /dev/sdd: 85.8 GB, 85899345920 bytes

255 heads, 63 sectors/track, 10443 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdd doesn't contain a valid partition table

[root@oracle-server ~]# fdisk /dev/sdd

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel. Changes will remain in memory only,

until you decide to write them. After that, of course, the previous

content won't be recoverable.

The number of cylinders for this disk is set to 10443.

There is nothing wrong with that, but this is larger than 1024,

and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs

   (e.g., DOS FDISK, OS/2 FDISK)

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): m

Command action

   a   toggle a bootable flag

   b   edit bsd disklabel

   c   toggle the dos compatibility flag

   d   delete a partition

   l   list known partition types

   m   print this menu

   n   add a new partition

   o   create a new empty DOS partition table

   p   print the partition table

   q   quit without saving changes

   s   create a new empty Sun disklabel

   t   change a partition's system id

   u   change display/entry units

   v   verify the partition table

   w   write table to disk and exit

   x   extra functionality (experts only)

Command (m for help): p

Disk /dev/sdd: 85.8 GB, 85899345920 bytes

255 heads, 63 sectors/track, 10443 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System

Command (m for help): n

Command action

   e   extended

   p   primary partition (1-4)

p

Partition number (1-4): 1

First cylinder (1-10443, default 1): 

Using default value 1

Last cylinder or +size or +sizeM or +sizeK (1-10443, default 10443): 

Using default value 10443

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

[root@oracle-server ~]# mkfs.ext3 /dev/sdd1

mke2fs 1.35 (28-Feb-2004)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

10485760 inodes, 20970841 blocks

1048542 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=20971520

640 block groups

32768 blocks per group, 32768 fragments per group

16384 inodes per group

Superblock backups stored on blocks: 

        32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 

        4096000, 7962624, 11239424, 20480000

Writing inode tables: done                            

Creating journal (8192 blocks): done

Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 30 mounts or

180 days, whichever comes first.  Use tune2fs -c or -i to override.

[root@oracle-server ~]# more /etc/fstab

# This file is edited by fstab-sync - see 'man fstab-sync' for details

LABEL=/1                /                       ext3    defaults        1 1

none                    /dev/pts                devpts  gid=5,mode=620  0 0

none                    /dev/shm                tmpfs   defaults        0 0

none                    /proc                   proc    defaults        0 0

none                    /sys                    sysfs   defaults        0 0

LABEL=/tmp              /tmp                    ext3    defaults        1 2

LABEL=/u01              /u01                    ext3    defaults        1 2

LABEL=/u02              /u02                    ext3    defaults        1 2

LABEL=/u03              /u03                    ext3    defaults        1 2

LABEL=SWAP-sda6         swap                    swap    defaults        0 0

/dev/sdb1               /u03/flash_recovery_area        ext3    defaults        1 2

/dev/sdc1               /u04                            ext3    defaults        1 2

192.168.4.21:/volume1/NFSforLinux/7222  /mnt/nfsbak     nfs     defaults        0 0

/dev/hda                /media/cdrecorder       auto    pamconsole,exec,noauto,managed 0 0

/dev/fd0                /media/floppy           auto    pamconsole,exec,noauto,managed 0 0

[root@oracle-server ~]# vi /etc/fstab

# This file is edited by fstab-sync - see 'man fstab-sync' for details

LABEL=/1                /                       ext3    defaults        1 1

none                    /dev/pts                devpts  gid=5,mode=620  0 0

none                    /dev/shm                tmpfs   defaults        0 0

none                    /proc                   proc    defaults        0 0

none                    /sys                    sysfs   defaults        0 0

LABEL=/tmp              /tmp                    ext3    defaults        1 2

LABEL=/u01              /u01                    ext3    defaults        1 2

LABEL=/u02              /u02                    ext3    defaults        1 2

LABEL=/u03              /u03                    ext3    defaults        1 2

LABEL=SWAP-sda6         swap                    swap    defaults        0 0

/dev/sdb1               /u03/flash_recovery_area        ext3    defaults        1 2

/dev/sdc1               /u04                            ext3    defaults        1 2

/dev/sdd1               /u05                            ext3    defaults        1 2

192.168.7.63:/volume1/NFSforLinux/7222  /mnt/nfsbak     nfs     defaults        0 0

/dev/hda                /media/cdrecorder       auto    pamconsole,exec,noauto,managed 0 0

/dev/fd0                /media/floppy           auto    pamconsole,exec,noauto,managed 0 0

"/etc/fstab" 17L, 1285C written

[root@oracle-server ~]# mkdir /u05

[root@oracle-server ~]# mount -a

[root@oracle-server ~]# df -h

Filesystem            Size  Used Avail Use% Mounted on

/dev/sda1             147G   90G   51G  65% /

/dev/sda7            1012M   34M  927M   4% /tmp

/dev/sda5              97G   78G   14G  86% /u01

/dev/sda3              97G   77G   15G  85% /u02

/dev/sda2             193G  165G   18G  91% /u03

/dev/sdb1             134G   95G   33G  75% /u03/flash_recovery_area

/dev/sdc1              99G   66G   28G  71% /u04

192.168.7.63:/volume1/NFSforLinux/7222

                      2.7T  1.9T  839G  70% /mnt/nfsbak

/dev/sdd1              79G   89M   75G   1% /u05

[root@oracle-server ~]# chown -R oracle:oinstall /u05

[root@oracle-server ~]# chmod -R 775 /u05

[root@oracle-server ~]#