目录
- 2.1. CentOS 6
-
- 2.1.1. system-config-date
- 2.1.2. system-config-firewall
- 2.1.3. system-config-securitylevel
- 2.1.4. system-config-language
- 2.1.5. system-config-keyboard
- 2.1.6. system-config-network
- 2.1.7. ntsysv
- 2.1.8. lokkit
- 2.1.9. system-config-kdump
- 2.1.10. system-config-services
- 2.1.11. authconfig-tui
- 2.2. nmtui
2.1. CentOS 6
setup
timeconfig
system-config-cluster
system-config-httpd
system-config-nfs
system-config-samba
2.1.1. system-config-date
┌────────┤ Timezone Selection ├────────┐ │ │ │ Select the timezone for the system. │ │ │ │ Asia/Bahrain ↑ │ │ Asia/Baku ▒ │ │ Asia/Bangkok ▒ │ │ Asia/Beirut ▮ │ │ Asia/Bishkek ▒ │ │ Asia/Brunei ▒ │ │ Asia/Choibalsan ▒ │ │ Asia/Chongqing ↓ │ │ │ │ [*] System clock uses UTC │ │ │ │ ┌────┐ ┌────────┐ │ │ │ OK │ │ Cancel │ │ │ └────┘ └────────┘ │ │ │ │ │ └──────────────────────────────────────┘
2.1.2. system-config-firewall
┌───────────┤ Firewall Configuration ├───────────┐
│ │
│ A firewall protects against unauthorized │
│ network intrusions. Enabling a firewall blocks │
│ all incoming connections. Disabling a firewall │
│ allows all connections and is not recommended. │
│ │
│ Firewall: [*] Enabled │
│ │
│ ┌────┐ ┌───────────┐ ┌────────┐ │
│ │ OK │ │ Customize │ │ Cancel │ │
│ └────┘ └───────────┘ └────────┘ │
│ │
│ │
└────────────────────────────────────────────────┘
2.1.3. system-config-securitylevel
┌────────────┤ Firewall Configuration ├────────────┐
│ │
│ A firewall protects against unauthorized │
│ network intrusions. Enabling a firewall blocks │
│ all incoming connections. Disabling a firewall │
│ allows all connections and is not recommended. │
│ │
│ Security Level: ( ) Enabled (*) Disabled │
│ │
│ SELinux: Enforcing │
│ Permissive │
│ Disabled │
│ │
│ ┌────┐ ┌───────────┐ ┌────────┐ │
│ │ OK │ │ Customize │ │ Cancel │ │
│ └────┘ └───────────┘ └────────┘ │
│ │
│ │
└──────────────────────────────────────────────────┘
2.1.4. system-config-language
┌──────────┤ Language Selection ├──────────┐ │ │ │ Select the language for the system. │ │ │ │ English (Hong Kong) ↑ │ │ English (India) ▒ │ │ English (Ireland) ▮ │ │ English (New Zealand) ▒ │ │ English (Philippines) ▒ │ │ English (Singapore) ▒ │ │ English (South Africa) ▒ │ │ English (USA) ↓ │ │ │ │ ┌────┐ ┌────────┐ │ │ │ OK │ │ Cancel │ │ │ └────┘ └────────┘ │ │ │ │ │ └──────────────────────────────────────────┘
2.1.5. system-config-keyboard
┌─────────────┤ Keyboard Selection ├──────────────┐
│ │
│ Select the appropriate keyboard for the system. │
│ │
│ Slovenian ↑ │
│ Serbian ▒ │
│ Serbian (latin) ▒ │
│ Swedish ▒ │
│ Turkish ▒ │
│ Ukrainian ▮ │
│ United Kingdom ▒ │
│ U.S. English ↓ │
│ │
│ ┌────┐ ┌────────┐ │
│ │ OK │ │ Cancel │ │
│ └────┘ └────────┘ │
│ │
│ │
└─────────────────────────────────────────────────┘
2.1.6. system-config-network
system-config-network
┌──────┤ Select Action ├──────┐
│ │
│ Device configuration │
│ DNS configuration │
│ │
│ │
│ │
│ ┌───────────┐ ┌──────┐ │
│ │ Save&Quit │ │ Quit │ │
│ └───────────┘ └──────┘ │
│ │
│ │
└─────────────────────────────┘
system-config-network-cmd
[root@r910 ~]# system-config-network-cmd DeviceList.Ethernet.eth0.AllowUser=False DeviceList.Ethernet.eth0.BootProto=dhcp DeviceList.Ethernet.eth0.Device=eth0 DeviceList.Ethernet.eth0.DeviceId=eth0 DeviceList.Ethernet.eth0.HardwareAddress=78:2B:CB:3B:4B:74 DeviceList.Ethernet.eth0.IPv6Init=False DeviceList.Ethernet.eth0.NMControlled=True DeviceList.Ethernet.eth0.OnBoot=False DeviceList.Ethernet.eth0.Type=Ethernet DeviceList.Ethernet.eth1.AllowUser=False DeviceList.Ethernet.eth1.BootProto=dhcp DeviceList.Ethernet.eth1.Device=eth1 DeviceList.Ethernet.eth1.DeviceId=eth1 DeviceList.Ethernet.eth1.HardwareAddress=78:2B:CB:3B:4B:76 DeviceList.Ethernet.eth1.IPv6Init=False DeviceList.Ethernet.eth1.NMControlled=True DeviceList.Ethernet.eth1.OnBoot=False DeviceList.Ethernet.eth1.Type=Ethernet DeviceList.Ethernet.eth2.AllowUser=False DeviceList.Ethernet.eth2.BootProto=dhcp DeviceList.Ethernet.eth2.Device=eth2 DeviceList.Ethernet.eth2.DeviceId=eth2 DeviceList.Ethernet.eth2.HardwareAddress=78:2B:CB:3B:4B:78 DeviceList.Ethernet.eth2.IPv6Init=False DeviceList.Ethernet.eth2.NMControlled=True DeviceList.Ethernet.eth2.OnBoot=False DeviceList.Ethernet.eth2.Type=Ethernet DeviceList.Ethernet.eth3.AllowUser=False DeviceList.Ethernet.eth3.BootProto=dhcp DeviceList.Ethernet.eth3.Device=eth3 DeviceList.Ethernet.eth3.DeviceId=eth3 DeviceList.Ethernet.eth3.HardwareAddress=78:2B:CB:3B:4B:7A DeviceList.Ethernet.eth3.IPv6Init=False DeviceList.Ethernet.eth3.NMControlled=True DeviceList.Ethernet.eth3.OnBoot=False DeviceList.Ethernet.eth3.Type=Ethernet HardwareList.Ethernet.eth3.Card.ModuleName=bnx2 HardwareList.Ethernet.eth3.Description=Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet HardwareList.Ethernet.eth3.Name=eth3 HardwareList.Ethernet.eth3.Status=system HardwareList.Ethernet.eth3.Type=Ethernet HardwareList.Ethernet.eth2.Card.ModuleName=bnx2 HardwareList.Ethernet.eth2.Description=Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet HardwareList.Ethernet.eth2.Name=eth2 HardwareList.Ethernet.eth2.Status=system HardwareList.Ethernet.eth2.Type=Ethernet HardwareList.Ethernet.eth1.Card.ModuleName=bnx2 HardwareList.Ethernet.eth1.Description=Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet HardwareList.Ethernet.eth1.Name=eth1 HardwareList.Ethernet.eth1.Status=system HardwareList.Ethernet.eth1.Type=Ethernet HardwareList.Ethernet.eth0.Card.ModuleName=bnx2 HardwareList.Ethernet.eth0.Description=Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet HardwareList.Ethernet.eth0.Name=eth0 HardwareList.Ethernet.eth0.Status=system HardwareList.Ethernet.eth0.Type=Ethernet ProfileList.default.Active=True ProfileList.default.ActiveDevices.1=eth0 ProfileList.default.ActiveDevices.2=eth1 ProfileList.default.ActiveDevices.3=eth2 ProfileList.default.ActiveDevices.4=eth3 ProfileList.default.DNS.Domainname= ProfileList.default.DNS.Hostname=r910.example.com ProfileList.default.DNS.PrimaryDNS=202.96.134.133 ProfileList.default.DNS.SearchList.1=example.com ProfileList.default.DNS.SecondaryDNS=202.96.128.68 ProfileList.default.DNS.TertiaryDNS= ProfileList.default.HostsList.1.AliasList.1=r910 ProfileList.default.HostsList.1.Hostname=r910.example.com ProfileList.default.HostsList.1.IP=192.168.80.33 ProfileList.default.HostsList.2.AliasList.1=localhost ProfileList.default.HostsList.2.Hostname=localhost.localdomain ProfileList.default.HostsList.2.IP=127.0.0.1 ProfileList.default.HostsList.3.AliasList.1=r910 ProfileList.default.HostsList.3.AliasList.2=localhost6.localdomain6 ProfileList.default.HostsList.3.AliasList.3=localhost6 ProfileList.default.HostsList.3.Hostname=r910.example.com ProfileList.default.HostsList.3.IP=::1 ProfileList.default.ProfileName=default
2.1.7. ntsysv
ntsysv
┌──────────────────┤ Services ├──────────────────┐
│ │
│ What services should be automatically started? │
│ │
│ [*] NetworkManager ↑ │
│ [*] acpid ▮ │
│ [*] atd ▒ │
│ [ ] auditd ▒ │
│ [*] autofs ▒ │
│ [*] avahi-daemon ▒ │
│ [*] bluetooth ▒ │
│ [ ] certmonger ▒ │
│ [ ] cgconfig ▒ │
│ [ ] cgred ▒ │
│ [*] cpuspeed ▒ │
│ [*] crond ▒ │
│ [*] cups ▒ │
│ [ ] dnsmasq ▒ │
│ [ ] firstboot ▒ │
│ [*] haldaemon ↓ │
│ │
│ ┌────┐ ┌────────┐ │
│ │ Ok │ │ Cancel │ │
│ └────┘ └────────┘ │
│ │
│ │
└────────────────────────────────────────────────┘
2.1.8. lokkit
lokkit
禁用Iptable与SELinux
lokkit --disabled --selinux=disabled
2.1.9. system-config-kdump
2.1.10. system-config-services
system-config-services
2.1.11. authconfig-tui
authconfig-tui
Please enable JavaScript to view the <a href="http://disqus.com/?ref_noscript">comments powered by Disqus.</a>comments powered by Disqus
原文出处：Netkiller 系列 手札
本文作者：陈景峯
转载请与作者联系，同时请务必标明文章原始出处和作者信息及本声明。
