[LeetCode] Remove Comments 移除注释

Given a C++ program, remove comments from it. The program source is an array where source[i] is the i-th line of the source code. This represents the result of splitting the original source code string by the newline character \n.

In C++, there are two types of comments, line comments, and block comments.

The string // denotes a line comment, which represents that it and rest of the characters to the right of it in the same line should be ignored.

The string /* denotes a block comment, which represents that all characters until the next (non-overlapping) occurrence of */ should be ignored. (Here, occurrences happen in reading order: line by line from left to right.) To be clear, the string /*/ does not yet end the block comment, as the ending would be overlapping the beginning.

The first effective comment takes precedence over others: if the string // occurs in a block comment, it is ignored. Similarly, if the string /* occurs in a line or block comment, it is also ignored.

If a certain line of code is empty after removing comments, you must not output that line: each string in the answer list will be non-empty.

There will be no control characters, single quote, or double quote characters. For example, source = "string s = "/* Not a comment. */";" will not be a test case. (Also, nothing else such as defines or macros will interfere with the comments.)

It is guaranteed that every open block comment will eventually be closed, so /* outside of a line or block comment always starts a new comment.

Finally, implicit newline characters can be deleted by block comments. Please see the examples below for details.

After removing the comments from the source code, return the source code in the same format.

Example 1:

Input: 
source = ["/*Test program */", "int main()", "{ ", "  // variable declaration ", "int a, b, c;", "/* This is a test", "   multiline  ", "   comment for ", "   testing */", "a = b + c;", "}"]

The line by line code is visualized as below:
/*Test program */
int main()
{ 
  // variable declaration 
int a, b, c;
/* This is a test
   multiline  
   comment for 
   testing */
a = b + c;
}
Output: ["int main()","{ ","  ","int a, b, c;","a = b + c;","}"]
The line by line code is visualized as below:
int main()
{ 
int a, b, c;
a = b + c;
}
Explanation: 
The string /* denotes a block comment, including line 1 and lines 6-9. The string // denotes line 4 as comments.

Example 2:

Input: 
source = ["a/*comment", "line", "more_comment*/b"]
Output: ["ab"]
Explanation: The original source string is "a/*comment\nline\nmore_comment*/b", where we have bolded the newline characters.  After deletion, the implicit newline characters are deleted, leaving the string "ab", which when delimited by newline characters becomes ["ab"].

Note:

这道题让我们移除代码中的注释部分，就是写代码中经常遇到的两种注释，单行注释和多行注释，也可以叫块注释，当然最最重要的就是要找到这两种注释的起始标识符"//"和"/*"，注意它们两者之间存在覆盖的关系，谁在前面谁work，比如"//abc/*"，那么此时后面的块注释起始符被忽略掉，同样"/*abc//"，后面的单行注释起始符也不起作用，所以两者之间的前后顺序很重要。博主刚开始想的方法是用string的find函数来分别找"//"和"/*"的起始位置，如果不存在就返回-1，但是需要分多种情况来处理，其是否存在，还有二者的前后顺序，处理起来比较麻烦。起始我们可以直接按字符来一个一个处理，由于块注释是多行注释，所以一旦之前有了块注释的起始符，当前行的处理方式就有所不同了，所以我们需要一个变量blocked来记录当前是否为块注释状态，初始化为false。建立空字符out，用来保存去除注释后的字符。然后我们遍历整个代码的每一行，遍历每一行中的每一个字符，如果当前字符是最后一个字符了，说明不会再有注释了，将当前字符加入out中，否则取出当前位置和下一个位置的两个字符，如果其正好是"/*"，说明之后的部分都是块注释了，我们将blocked赋值为true，然后指针向后移动一个，明明两个字符啊，为啥只移动一个呢，因为另一个可以在for循环中的++i移动；如果当前两个字符正好是"//"，说明当前行之后都是注释，我们并不care后面有啥，所以可以直接break掉当前行；如果都不是，说明当前字符是代码，将其加入out中。好，下面来看blocked为true的情况，说明之后的内容都是块注释的内容，我们唯一关心的是有没有结束符"*/"，所以还是先做判断，如果当前不是最后一个字符，说明至少还有两个字符，然后取出两个字符，如果正好是块注释结束符，那么我们将标识重置为false，指针要后移动一个。当前行遍历完后，如果out不为空，且blocked为false，则将out存入结果res中，参见代码如下： 

public:
    vector<string> removeComments(vector<string>& source) {
        vector<string> res;
        bool blocked = false;
        string out = "";
        for (string line : source) {
            for (int i = 0; i < line.size(); ++i) {
                if (!blocked) {
                    if (i == line.size() - 1) out += line[i];
                    else {
                        string t = line.substr(i, 2);
                        if (t == "/*") blocked = true, ++i;
                        else if (t == "//") break;
                        else out += line[i];
                    }
                } else {
                    if (i < line.size() - 1) {
                        string t = line.substr(i, 2);
                        if (t == "*/") blocked = false, ++i;
                    }
                }
            }
            if (!out.empty() && !blocked) {
                res.push_back(out);
                out = "";
            }
        }
        return res;
    }
};

本文转自博客园Grandyang的博客，原文链接：[LeetCode] Remove Comments 移除注释

，如需转载请自行联系原博主。