AI 助理
备案控制台
开发者社区 开发与运维 文章 正文

C语言库函数大全及应用实例七

2005-12-26 857
版权
版权声明：
本文内容由阿里云实名注册用户自发贡献，版权归原作者所有，阿里云开发者社区不拥有其著作权，亦不承担相应法律责任。具体规则请查看《 阿里云开发者社区用户服务协议》和 《阿里云开发者社区知识产权保护指引》。如果您发现本社区中有涉嫌抄袭的内容，填写 侵权投诉表单进行举报，一经查实，本社区将立刻删除涉嫌侵权内容。
简介： [编程资料]C语言库函数大全及应用实例七 函数名: getw 功 能: 从流中取一整数 用 法: int getw(FILE *strem); 程序例: ＃i nclude ＃i nclude #define FNAME "test.
函数名: getw
功 能: 从流中取一整数
用 法: int getw(FILE *strem);
程序例:

＃i nclude
＃i nclude

#define FNAME "test.$$$"

int main(void)
{
FILE *fp;
int word;

/* place the word in a file */
fp = fopen(FNAME, "wb");
if (fp == NULL)
{
printf("Error opening file %s\n", FNAME);
exit(1);
}

word = 94;
putw(word,fp);
if (ferror(fp))
printf("Error writing to file\n");
else
printf("Successful write\n");
fclose(fp);

/* reopen the file */
fp = fopen(FNAME, "rb");
if (fp == NULL)
{
printf("Error opening file %s\n", FNAME);
exit(1);
}

/* extract the word */
word = getw(fp);
if (ferror(fp))
printf("Error reading file\n");
else
printf("Successful read: word = %d\n", word);

/* clean up */
fclose(fp);
unlink(FNAME);

return 0;
}

函数名: getx
功 能: 返回当前图形位置的x坐标
用 法: int far getx(void);
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude

int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
char msg[80];

/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");

/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}

/* move to the screen center point */
moveto(getmaxx() / 2, getmaxy() / 2);

/* create a message string */
sprintf(msg, "<-(%d, %d) is the here.", getx(), gety());

/* display the message */
outtext(msg);

/* clean up */
getch();
closegraph();
return 0;
}

函数名: gety
功 能: 返回当前图形位置的y坐标
用 法: int far gety(void);
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude

int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
char msg[80];

/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");

/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}

/* move to the screen center point */
moveto(getmaxx() / 2, getmaxy() / 2);

/* create a message string */
sprintf(msg, "<-(%d, %d) is the here.", getx(), gety());

/* display the message */
outtext(msg);

/* clean up */
getch();
closegraph();
return 0;
}

函数名: gmtime
功 能: 把日期和时间转换为格林尼治标准时间(GMT)
用 法: struct tm *gmtime(long *clock);
程序例:

＃i nclude
＃i nclude
＃i nclude

/* Pacific Standard Time & Daylight Savings */
char *tzstr = "TZ=PST8PDT";

int main(void)
{
time_t t;
struct tm *gmt, *area;

putenv(tzstr);
tzset();

t = time(NULL);
area = localtime(&t);
printf("Local time is: %s", asctime(area));
gmt = gmtime(&t);
printf("GMT is: %s", asctime(gmt));
return 0;
}

函数名: gotoxy
功 能: 在文本窗口中设置光标
用 法: void gotoxy(int x, int y);
程序例:

＃i nclude

int main(void)
{
clrscr();
gotoxy(35, 12);
cprintf("Hello world");
getch();
return 0;
}

函数名: gotoxy
功 能: 在文本窗口中设置光标
用 法: void gotoxy(int x, int y);
程序例:

＃i nclude

int main(void)
{
clrscr();
gotoxy(35, 12);
cprintf("Hello world");
getch();
return 0;
}

函数名: graphdefaults
功 能: 将所有图形设置复位为它们的缺省值
用 法: void far graphdefaults(void);
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude

int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int maxx, maxy;

/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "c:\\bor\\Borland\\bgi");

/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}

maxx = getmaxx();
maxy = getmaxy();

/* output line with non-default settings */
setlinestyle(DOTTED_LINE, 0, 3);
line(0, 0, maxx, maxy);
outtextxy(maxx/2, maxy/3, "Before default values are restored.");
getch();

/* restore default values for everything */
graphdefaults();

/* clear the screen */
cleardevice();

/* output line with default settings */
line(0, 0, maxx, maxy);
outtextxy(maxx/2, maxy/3, "After restoring default values.");

/* clean up */
getch();
closegraph();
return 0;
}

函数名: grapherrormsg
功 能: 返回一个错误信息串的指针
用 法: char *far grapherrormsg(int errorcode);
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude

#define NONSENSE -50

int main(void)
{
/* FORCE AN ERROR TO OCCUR */
int gdriver = NONSENSE, gmode, errorcode;

/* initialize graphics mode */
initgraph(&gdriver, &gmode, "");

/* read result of initialization */
errorcode = graphresult();

/* if an error occurred, then output a */
/* descriptive error message. */
if (errorcode != grOk)
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}

/* draw a line */
line(0, 0, getmaxx(), getmaxy());

/* clean up */
getch();
closegraph();
return 0;
}

函数名: graphresult
功 能: 返回最后一次不成功的图形操作的错误代码
用 法: int far graphresult(void);
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude

int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;

/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");

/* read result of initialization */
errorcode = graphresult();

if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}

/* draw a line */
line(0, 0, getmaxx(), getmaxy());

/* clean up */
getch();
closegraph();
return 0;
}

函数名: _graphfreemem
功 能: 用户可修改的图形存储区释放函数
用 法: void far _graphfreemem(void far *ptr, unsigned size);
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude
＃i nclude

int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;

/* clear the text screen */
clrscr();
printf("Press any key to initialize graphics mode:");
getch();
clrscr();

/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");

/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}

midx = getmaxx() / 2;
midy = getmaxy() / 2;

/* display a message */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, "Press any key to exit graphics mode:");

/* clean up */
getch();
closegraph();
return 0;
}

/* called by the graphics kernel to allocate memory */
void far * far _graphgetmem(unsigned size)
{
printf("_graphgetmem called to allocate %d bytes.\n", size);
printf("hit any key:");
getch();
printf("\n");

/* allocate memory from far heap */
return farmalloc(size);
}

/* called by the graphics kernel to free memory */
void far _graphfreemem(void far *ptr, unsigned size)
{
printf("_graphfreemem called to free %d bytes.\n", size);
printf("hit any key:");
getch();
printf("\n");

/* free ptr from far heap */
farfree(ptr);
}

函数名: _graphgetmem
功 能: 用户可修改的图形存储区分配函数
用 法: void far *far _graphgetmem(unsigned size);
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude
＃i nclude

int main(void)
{
/* request autodetection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy;

/* clear the text screen */
clrscr();
printf("Press any key to initialize graphics mode:");
getch();
clrscr();

/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");

/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}

midx = getmaxx() / 2;
midy = getmaxy() / 2;

/* display a message */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(midx, midy, "Press any key to exit graphics mode:");

/* clean up */
getch();
closegraph();
return 0;
}

/* called by the graphics kernel to allocate memory */
void far * far _graphgetmem(unsigned size)
{
printf("_graphgetmem called to allocate %d bytes.\n", size);
printf("hit any key:");
getch();
printf("\n");

/* allocate memory from far heap */
return farmalloc(size);
}

/* called by the graphics kernel to free memory */
void far _graphfreemem(void far *ptr, unsigned size)
{
printf("_graphfreemem called to free %d bytes.\n", size);
printf("hit any key:");
getch();
printf("\n");

/* free ptr from far heap */
farfree(ptr);
}

函数名: harderr
功 能: 建立一个硬件错误处理程序
用 法: void harderr(int (*fptr)());
程序例:
/*This program will trap disk errors and prompt
the user for action. Try running it with no
disk in drive A: to invoke its functions.*/

＃i nclude
＃i nclude
＃i nclude
#define IGNORE 0
#define RETRY 1
#define ABORT 2
int buf[500];
/*define the error messages for trapping disk problems*/
static char *err_msg[] = {
"write protect",
"unknown unit",
"drive not ready",
"unknown command",
"data error (CRC)",
"bad request",
"seek error",
"unknown media type",
"sector not found",
"printer out of paper",
"write fault",
"read fault",
"general failure",
"reserved",
"reserved",
"invalid disk change"
};

error_win(char *msg)
{
int retval;

cputs(msg);

/*prompt for user to press a key to abort, retry, ignore*/
while(1)
{
retval= getch();
if (retval == 'a' || retval == 'A')
{
retval = ABORT;
break;
}
if (retval == 'r' || retval == 'R')
{
retval = RETRY;
break;
}
if (retval == 'i' || retval == 'I')
{
retval = IGNORE;
break;
}
}

return(retval);
}

/*pragma warn -par reduces warnings which occur
due to the non use of the parameters errval,
bp and si to the handler.*/
#pragma warn -par

int handler(int errval,int ax,int bp,int si)
{
static char msg[80];
unsigned di;
int drive;
int errorno;
di= _DI;
/*if this is not a disk error then it was
another device having trouble*/

if (ax < 0)
{
/* report the error */
error_win("Device error");
/* and return to the program directly requesting abort */
hardretn(ABORT);
}
/* otherwise it was a disk error */
drive = ax & 0x00FF;
errorno = di & 0x00FF;
/* report which error it was */
sprintf(msg, "Error: %s on drive %c\r\nA)bort, R)etry, I)gnore: ",
err_msg[errorno], 'A' + drive);
/*
return to the program via dos interrupt 0x23 with abort, retry,
or ignore as input by the user.
*/
hardresume(error_win(msg));
return ABORT;
}
#pragma warn +par

int main(void)
{
/*
install our handler on the hardware problem interrupt
*/
harderr(handler);
clrscr();
printf("Make sure there is no disk in drive A:\n");
printf("Press any key ....\n");
getch();
printf("Trying to access drive A:\n");
printf("fopen returned %p\n",fopen("A:temp.dat", "w"));
return 0;
}

函数名: hardresume
功 能: 硬件错误处理函数
用 法: void hardresume(int rescode);
程序例:

/* This program will trap disk errors and prompt the user for action. */
/* Try running it with no disk in drive A: to invoke its functions */

＃i nclude
＃i nclude
＃i nclude

#define IGNORE 0
#define RETRY 1
#define ABORT 2

int buf[500];

/* define the error messages for trapping disk problems */
static char *err_msg[] = {
"write protect",
"unknown unit",
"drive not ready",
"unknown command",
"data error (CRC)",
"bad request",
"seek error",
"unknown media type",
"sector not found",
"printer out of paper",
"write fault",
"read fault",
"general failure",
"reserved",
"reserved",
"invalid disk change"
};

error_win(char *msg)
{
int retval;

cputs(msg);

/* prompt for user to press a key to abort, retry, ignore */
while(1)
{
retval= getch();
if (retval == 'a' || retval == 'A')
{
retval = ABORT;
break;
}
if (retval == 'r' || retval == 'R')
{
retval = RETRY;
break;
}
if (retval == 'i' || retval == 'I')
{
retval = IGNORE;
break;
}
}

return(retval);
}

/* pragma warn -par reduces warnings which occur due to the non use */
/* of the parameters errval, bp and si to the handler. */
#pragma warn -par

int handler(int errval,int ax,int bp,int si)
{
static char msg[80];
unsigned di;
int drive;
int errorno;

di= _DI;
/* if this is not a disk error then it was another device having trouble */

if (ax < 0)
{
/* report the error */
error_win("Device error");
/* and return to the program directly
requesting abort */
hardretn(ABORT);
}
/* otherwise it was a disk error */
drive = ax & 0x00FF;
errorno = di & 0x00FF;
/* report which error it was */
sprintf(msg, "Error: %s on drive %c\r\nA)bort, R)etry, I)gnore: ",
err_msg[errorno], 'A' + drive);
/* return to the program via dos interrupt 0x23 with abort, retry */
/* or ignore as input by the user. */
hardresume(error_win(msg));
return ABORT;
}
#pragma warn +par

int main(void)
{
/* install our handler on the hardware problem interrupt */
harderr(handler);
clrscr();
printf("Make sure there is no disk in drive A:\n");
printf("Press any key ....\n");
getch();
printf("Trying to access drive A:\n");
printf("fopen returned %p\n",fopen("A:temp.dat", "w"));
return 0;
}

函数名: highvideo
功 能: 选择高亮度文本字符
用 法: void highvideo(void);
程序例:

＃i nclude

int main(void)
{
clrscr();

lowvideo();
cprintf("Low Intensity text\r\n");
highvideo();
gotoxy(1,2);
cprintf("High Intensity Text\r\n");

return 0;
}

函数名: hypot
功 能: 计算直角三角形的斜边长
用 法: double hypot(double x, double y);
程序例:

＃i nclude
＃i nclude

int main(void)
{
double result;
double x = 3.0;
double y = 4.0;

result = hypot(x, y);
printf("The hypotenuse is: %lf\n", result);

return 0;
}

函数名: imagesize
功 能: 返回保存位图像所需的字节数
用 法: unsigned far imagesize(int left, int top, int right, int bottom);
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude

#define ARROW_SIZE 10

void draw_arrow(int x, int y);

int main(void)
{
/* request autodetection */
int gdriver = DETECT, gmode, errorcode;
void *arrow;
int x, y, maxx;
unsigned int size;

/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");

/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}

maxx = getmaxx();
x = 0;
y = getmaxy() / 2;

/* draw the image to be grabbed */
draw_arrow(x, y);

/* calculate the size of the image */
size = imagesize(x, y-ARROW_SIZE, x+(4*ARROW_SIZE), y+ARROW_SIZE);

/* allocate memory to hold the image */
arrow = malloc(size);

/* grab the image */
getimage(x, y-ARROW_SIZE, x+(4*ARROW_SIZE), y+ARROW_SIZE, arrow);

/* repeat until a key is pressed */
while (!kbhit())
{
/* erase old image */
putimage(x, y-ARROW_SIZE, arrow, XOR_PUT);

x += ARROW_SIZE;
if (x >= maxx)
x = 0;

/* plot new image */
putimage(x, y-ARROW_SIZE, arrow, XOR_PUT);
}

/* clean up */
free(arrow);
closegraph();
return 0;
}

void draw_arrow(int x, int y)
{
/* draw an arrow on the screen */
moveto(x, y);
linerel(4*ARROW_SIZE, 0);
linerel(-2*ARROW_SIZE, -1*ARROW_SIZE);
linerel(0, 2*ARROW_SIZE);
linerel(2*ARROW_SIZE, -1*ARROW_SIZE);
}

函数名: initgraph
功 能: 初始化图形系统
用 法: void far initgraph(int far *graphdriver, int far *graphmode,
char far *pathtodriver);
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude

int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;

/* initialize graphics mode */
initgraph(&gdriver, &gmode, "");

/* read result of initialization */
errorcode = graphresult();

if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* return with error code */
}

/* draw a line */
line(0, 0, getmaxx(), getmaxy());

/* clean up */
getch();
closegraph();
return 0;
}

函数名: inport
功 能: 从硬件端口中输入
用 法: int inp(int protid);
程序例:

＃i nclude
＃i nclude

int main(void)
{
int result;
int port = 0; /* serial port 0 */

result = inport(port);
printf("Word read from port %d = 0x%X\n", port, result);
return 0;
}

函数名: insline
功 能: 在文本窗口中插入一个空行
用 法: void insline(void);
程序例:

＃i nclude

int main(void)
{
clrscr();
cprintf("INSLINE inserts an empty line in the text window\r\n");
cprintf("at the cursor position using the current text\r\n");
cprintf("background color. All lines below the empty one\r\n");
cprintf("move down one line and the bottom line scrolls\r\n");
cprintf("off the bottom of the window.\r\n");
cprintf("\r\nPress any key to continue:");
gotoxy(1, 3);
getch();
insline();
getch();
return 0;
}

函数名: installuserdriver
功 能: 安装设备驱动程序到BGI设备驱动程序表中
用 法: int far installuserdriver(char far *name, int (*detect)(void));
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude

/* function prototypes */
int huge detectEGA(void);
void checkerrors(void);

int main(void)
{
int gdriver, gmode;

/* install a user written device driver */
gdriver = installuserdriver("EGA", detectEGA);

/* must force use of detection routine */
gdriver = DETECT;

/* check for any installation errors */
checkerrors();

/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");

/* check for any initialization errors */
checkerrors();

/* draw a line */
line(0, 0, getmaxx(), getmaxy());

/* clean up */
getch();
closegraph();
return 0;
}

/* detects EGA or VGA cards */
int huge detectEGA(void)
{
int driver, mode, sugmode = 0;

detectgraph(&driver, &mode);
if ((driver == EGA) || (driver == VGA))
/* return suggested video mode number */
return sugmode;
else
/* return an error code */
return grError;
}

/* check for and report any graphics errors */
void checkerrors(void)
{
int errorcode;

/* read result of last graphics operation */
errorcode = graphresult();
if (errorcode != grOk)
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1);
}
}

函数名: installuserfont
功 能: 安装未嵌入BGI系统的字体文件(CHR)
用 法: int far installuserfont(char far *name);
程序例:

＃i nclude
＃i nclude
＃i nclude
＃i nclude

/* function prototype */
void checkerrors(void);

int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode;
int userfont;
int midx, midy;

/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");

midx = getmaxx() / 2;
midy = getmaxy() / 2;

/* check for any initialization errors */
checkerrors();

/* install a user defined font file */
userfont = installuserfont("USER.CHR");

/* check for any installation errors */
checkerrors();

/* select the user font */
settextstyle(userfont, HORIZ_DIR, 4);

/* output some text */
outtextxy(midx, midy, "Testing!");

/* clean up */
getch();
closegraph();
return 0;
}

/* check for and report any graphics errors */
void checkerrors(void)
{
int errorcode;

/* read result of last graphics operation */
errorcode = graphresult();
if (errorcode != grOk)
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1);
}
}

函数名: int86
功 能: 通用8086软中断接口
用 法: int int86(int intr_num, union REGS *inregs, union REGS *outregs);
程序例:

＃i nclude
＃i nclude
＃i nclude

#define VIDEO 0x10

void movetoxy(int x, int y)
{
union REGS regs;

regs.h.ah = 2; /* set cursor postion */
regs.h.dh = y;
regs.h.dl = x;
regs.h.bh = 0; /* video page 0 */
int86(VIDEO, ®s, ®s);
}

int main(void)
{
clrscr();
movetoxy(35, 10);
printf("Hello\n");
return 0;
}

函数名: int86x
功 能: 通用8086软中断接口
用 法: int int86x(int intr_num, union REGS *insegs, union REGS *outregs,
struct SREGS *segregs);
程序例:

＃i nclude
＃i nclude
＃i nclude

int main(void)
{
char filename[80];
union REGS inregs, outregs;
struct SREGS segregs;

printf("Enter filename: ");
gets(filename);
inregs.h.ah = 0x43;
inregs.h.al = 0x21;
inregs.x.dx = FP_OFF(filename);
segregs.ds = FP_SEG(filename);
int86x(0x21, &inregs, &outregs, &segregs);
printf("File attribute: %X\n", outregs.x.cx);
return 0;
}

函数名: intdos
功 能: 通用DOS接口
用 法: int intdos(union REGS *inregs, union REGS *outregs);
程序例:

＃i nclude
＃i nclude

<

文章标签：
图形学
移动开发
C语言
数据格式
存储
XML
关键词：
C语言函数
C语言库
C语言应用
C语言实例
C语言库应用
jimbuster
目录
相关文章
osswangxining
|
8天前
|
存储 C语言
`scanf`是C语言中用于按格式读取标准输入的函数
`scanf`是C语言中用于按格式读取标准输入的函数，通过格式字符串解析输入并存入指定变量。需注意输入格式严格匹配，并建议检查返回值以确保读取成功，提升程序健壮性。
osswangxining
365 0
游客dng4gjyb342he
|
20天前
|
监控 网络协议 安全
基于标准C语言实现的跨平台Modbus协议库
基于标准C语言实现的跨平台Modbus协议库
游客dng4gjyb342he
104 0
蓝易云
|
3月前
|
安全 C语言
C语言中的字符、字符串及内存操作函数详细讲解
通过这些函数的正确使用，可以有效管理字符串和内存操作，它们是C语言编程中不可或缺的工具。
蓝易云
242 15
蓝易云
|
6月前
|
C语言
C语言中条件操作符的应用
最后，条件操作符是个超级英雄，但不是每个代码问题都需要一个超级英雄来解决。一定要在适当的时候适度的使用它，那么它将成为你的编程工具箱中的一件强力工具。
蓝易云
313 75
程序员Feri
|
8月前
|
人工智能 Java 程序员
一文彻底搞清楚C语言的函数
本文介绍C语言函数：函数是程序模块化的工具，由函数头和函数体组成，涵盖定义、调用、参数传递及声明等内容。值传递确保实参不受影响，函数声明增强代码可读性。君志所向，一往无前！
程序员Feri
195 1
一文彻底搞清楚C语言的函数
RossyYan
|
9月前
|
存储 C语言
【C语言程序设计——函数】递归求斐波那契数列的前n项（头歌实践教学平台习题）【合集】
本关任务是编写递归函数求斐波那契数列的前n项。主要内容包括： 1. **递归的概念**：递归是一种函数直接或间接调用自身的编程技巧，通过“俄罗斯套娃”的方式解决问题。 2. **边界条件的确定**：边界条件是递归停止的条件，确保递归不会无限进行。例如，计算阶乘时，当n为0或1时返回1。 3. **循环控制与跳转语句**：介绍`for`、`while`循环及`break`、`continue`语句的使用方法。 编程要求是在右侧编辑器Begin--End之间补充代码，测试输入分别为3和5，预期输出为斐波那契数列的前几项。通关代码已给出，需确保正确实现递归逻辑并处理好边界条件，以避免栈溢出或结果
RossyYan
371 16
RossyYan
|
9月前
|
存储 编译器 C语言
【C语言程序设计——函数】分数数列求和2（头歌实践教学平台习题）【合集】
函数首部：按照 C 语言语法，函数的定义首部表明这是一个自定义函数，函数名为fun，它接收一个整型参数n，用于指定要求阶乘的那个数，并且函数的返回值类型为float（在实际中如果阶乘结果数值较大，用float可能会有精度损失，也可以考虑使用double等更合适的数据类型，这里以float为例）。例如：// 函数体代码将放在这里函数体内部变量定义：在函数体中，首先需要定义一些变量来辅助完成阶乘的计算。比如需要定义一个变量（通常为float或double类型，这里假设用float。
RossyYan
201 3
RossyYan
|
9月前
|
存储 算法 安全
【C语言程序设计——函数】分数数列求和1（头歌实践教学平台习题）【合集】
if 语句是最基础的形式，当条件为真时执行其内部的语句块；switch 语句则适用于针对一个表达式的多个固定值进行判断，根据表达式的值与各个 case 后的常量值匹配情况，执行相应 case 分支下的语句，直到遇到 break 语句跳出 switch 结构，若没有匹配值则执行 default 分支（可选）。例如，在判断一个数是否大于 10 的场景中，条件表达式为 “num> 10”，这里的 “num” 是程序中的变量，通过比较其值与 10 的大小关系来确定条件的真假。常量的值必须是唯一的，且在同一个。
RossyYan
175 2
RossyYan
|
9月前
|
存储 算法 C语言
【C语言程序设计——函数】素数判定（头歌实践教学平台习题）【合集】
本内容介绍了编写一个判断素数的子函数的任务，涵盖循环控制与跳转语句、算术运算符（%）、以及素数的概念。任务要求在主函数中输入整数并输出是否为素数的信息。相关知识包括 `for` 和 `while` 循环、`break` 和 `continue` 语句、取余运算符 `%` 的使用及素数定义、分布规律和应用场景。编程要求根据提示补充代码，测试说明提供了输入输出示例，最后给出通关代码和测试结果。 任务核心：编写判断素数的子函数并在主函数中调用，涉及循环结构和条件判断。
RossyYan
379 23
RossyYan
|
9月前
|
算法 C语言
【C语言程序设计——函数】利用函数求解最大公约数和最小公倍数（头歌实践教学平台习题）【合集】
本文档介绍了如何编写两个子函数，分别求任意两个整数的最大公约数和最小公倍数。内容涵盖循环控制与跳转语句的使用、最大公约数的求法（包括辗转相除法和更相减损术），以及基于最大公约数求最小公倍数的方法。通过示例代码和测试说明，帮助读者理解和实现相关算法。最终提供了完整的通关代码及测试结果，确保编程任务的成功完成。
RossyYan
311 15
【C语言程序设计——函数】利用函数求解最大公约数和最小公倍数（头歌实践教学平台习题）【合集】