【LINUX学习】磁盘分割之建立primary和logical 分区

简介:

[root@localhost ~]# fdisk -l
Disk /dev/sda: 4294 MB, 4294967296 bytes
255 heads, 63 sectors/track, 522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          13      104391   83  Linux
/dev/sda2              14         522     4088542+  83  Linux

Disk /dev/sdb: 3221 MB, 3221225472 bytes
255 heads, 63 sectors/track, 391 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdb doesn't contain a valid partition table
Disk /dev/sdc: 3221 MB, 3221225472 bytes
255 heads, 63 sectors/track, 391 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *           1         131     1052226   82  Linux swap / Solaris

Disk /dev/sdd: 3221 MB, 3221225472 bytes
255 heads, 63 sectors/track, 391 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id  System

[root@localhost ~]# fdisk /dev/sdb
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help): p
Disk /dev/sdb: 3221 MB, 3221225472 bytes
255 heads, 63 sectors/track, 391 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id  System
Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-391, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-391, default 391): 150
Command (m for help): p
Disk /dev/sdb: 3221 MB, 3221225472 bytes
255 heads, 63 sectors/track, 391 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         150     1204843+  83  Linux

Command (m for help): n
Command action
   e   extended
   p   primary partition (1-4)
e --建立拓展分区
Partition number (1-4): 4
First cylinder (151-391, default 151):
Using default value 151
Last cylinder or +size or +sizeM or +sizeK (151-391, default 391):
Using default value 391
Command (m for help): p
Disk /dev/sdb: 3221 MB, 3221225472 bytes
255 heads, 63 sectors/track, 391 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         150     1204843+  83  Linux
/dev/sdb4             151         391     1935832+   5  Extended
Command (m for help): n
Command action
   l   logical (5 or over)
   p   primary partition (1-4)
l   --在拓展分区中建立逻辑分区,因为拓展分区是不能够直接被使用的,只有做成拓展分区时,才能够被使用。
First cylinder (151-391, default 151):
Using default value 151
Last cylinder or +size or +sizeM or +sizeK (151-391, default 391): 250
Command (m for help): p
Disk /dev/sdb: 3221 MB, 3221225472 bytes
255 heads, 63 sectors/track, 391 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         150     1204843+  83  Linux
/dev/sdb4             151         391     1935832+   5  Extended
/dev/sdb5             151         250      803218+  83  Linux
Command (m for help): n
Command action
   l   logical (5 or over)
   p   primary partition (1-4)
l --在拓展分区中建立逻辑分区
First cylinder (251-391, default 251):
Using default value 251
Last cylinder or +size or +sizeM or +sizeK (251-391, default 391):
Using default value 391
Command (m for help): p
Disk /dev/sdb: 3221 MB, 3221225472 bytes
255 heads, 63 sectors/track, 391 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         150     1204843+  83  Linux
/dev/sdb4             151         391     1935832+   5  Extended
/dev/sdb5             151         250      803218+  83  Linux
/dev/sdb6             251         391     1132551   83  Linux

Command (m for help): w  ---保存
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@localhost ~]# fdisk -l
Disk /dev/sda: 4294 MB, 4294967296 bytes
255 heads, 63 sectors/track, 522 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          13      104391   83  Linux
/dev/sda2              14         522     4088542+  83  Linux

Disk /dev/sdb: 3221 MB, 3221225472 bytes
255 heads, 63 sectors/track, 391 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1         150     1204843+  83  Linux
/dev/sdb4             151         391     1935832+   5  Extended
/dev/sdb5             151         250      803218+  83  Linux
/dev/sdb6             251         391     1132551   83  Linux
[root@localhost ~]# 

相关文章
|
6月前
|
存储 监控 Linux
Linux: 检测磁盘坏块 你得会吧!
Linux: 检测磁盘坏块 你得会吧!
397 19
Linux: 检测磁盘坏块 你得会吧!
|
5月前
|
Linux
在线对Linux进行磁盘扩容的技术指南。
综上所述,Linux磁盘扩容的过程,重要的不仅是技术,更是对每一步骤的深刻理解和投入的爱心。只要手握正确的工具,我们不仅能满足"孩子"的成长需求,还能享受其中的乐趣和成就。
372 10
|
6月前
|
监控 固态存储 Linux
如何判断Linux磁盘是SSD还是HDD?
总的来说,判断磁盘是SSD还是HDD并不复杂,只需要使用正确的命令和方法,就可以轻松得到结果。希望这些信息对你有所帮助,如果你还有其他问题,欢迎随时提问。
570 15
|
7月前
|
存储 IDE Linux
零基础保姆级教程!手把手教你免费玩转Linux CentOS安装+学习环境搭建(附避坑指南)
本文详细介绍了在VMware虚拟机中安装CentOS 6.8的全过程。首先,需确保已安装VMware并开启V-CPU虚拟化功能,可通过BIOS设置或使用LeoMoon CPU-V工具检测。接着,下载CentOS镜像文件,并在VMware中新建虚拟机,配置CPU、内存、硬盘等参数。最后,加载ISO镜像启动虚拟机,按照提示完成CentOS的安装,包括语言、键盘、存储方式、地区、密码设置及硬盘分区等步骤。安装完成后,以root用户登录即可进入系统桌面,开始学习Linux命令和操作。
735 12
零基础保姆级教程!手把手教你免费玩转Linux CentOS安装+学习环境搭建(附避坑指南)
|
7月前
|
Linux
Linux系统ext4磁盘扩容实践指南
这个过程就像是给你的房子建一个新的储物间。你需要先找到空地(创建新的分区),然后建造储物间(格式化为ext4文件系统),最后将储物间添加到你的房子中(将新的分区添加到文件系统中)。完成这些步骤后,你就有了一个更大的储物空间。
645 10
|
9月前
|
Ubuntu Linux 网络安全
Linux磁盘挂接教程
Linux磁盘挂接教程
173 14
|
1月前
|
Linux 应用服务中间件 Shell
二、Linux文本处理与文件操作核心命令
熟悉了Linux的基本“行走”后,就该拿起真正的“工具”干活了。用grep这个“放大镜”在文件里搜索内容,用find这个“探测器”在系统中寻找文件,再用tar把东西打包带走。最关键的是要学会使用管道符|,它像一条流水线,能把这些命令串联起来,让简单工具组合出强大的功能,比如 ps -ef | grep 'nginx' 就能快速找出nginx进程。
286 1
二、Linux文本处理与文件操作核心命令
|
1月前
|
安全 Ubuntu Unix
一、初识 Linux 与基本命令
玩转Linux命令行,就像探索一座新城市。首先要熟悉它的“地图”,也就是/根目录下/etc(放配置)、/home(住家)这些核心区域。然后掌握几个“生存口令”:用ls看周围,cd去别处,mkdir建新房,cp/mv搬东西,再用cat或tail看文件内容。最后,别忘了随时按Tab键,它能帮你自动补全命令和路径,是提高效率的第一神器。
551 56
|
16天前
|
存储 安全 Linux
Linux卡在emergency mode怎么办?xfs_repair 命令轻松解决
Linux虚拟机遇紧急模式?别慌!多因磁盘挂载失败。本文教你通过日志定位问题,用`xfs_repair`等工具修复文件系统,三步快速恢复。掌握查日志、修磁盘、验重启,轻松应对紧急模式,保障系统稳定运行。
144 2
|
26天前
|
缓存 监控 Linux
Linux内存问题排查命令详解
Linux服务器卡顿?可能是内存问题。掌握free、vmstat、sar三大命令,快速排查内存使用情况。free查看实时内存,vmstat诊断系统整体性能瓶颈,sar实现长期监控,三者结合,高效定位并解决内存问题。
78 0
Linux内存问题排查命令详解