WM Activate Storage Bin Type Search(十四)-阿里云开发者社区

开发者社区> 数据库> 正文
登录阅读全文

WM Activate Storage Bin Type Search(十四)

简介: Activate Storage Bin Type Search激活存储位类型查找The Warehouse Management System (WMS) can manage different sizes of storage bins within a storage type.

Activate Storage Bin Type Search
激活存储位类型查找
The Warehouse Management System (WMS) can manage different sizes of storage bins within a storage type.  The storage bins are determined during the storage bin search:
WMS可以管理在同一存储类型下的不同尺寸的存储BIN.BIN在存储BIN查找时被确认.
1. It is generally known which loading equipment ( storage unit type) is required to place the material into stock. This information is either entered manually  OR can be found in the material master.
通常人们知道放置一个物料到库存,知道用什么装卸设备.(存储单位类型),这信息可以手工输入或维护在物料主数据.
In this case, the SAP System suggests the relevant storage unit type for the putaway as a default.
这种情况,系统为上架建议一个相关的存储单位类型.
2. Then the WMS checks if the storage unit which is to be placed into stock may be put away in the storage typed determined by the storage type search.
在上架时,系统按存储类型查找确定存储类型下可以放置的存储单位
The table "Allowed storage unit types per storage type" contains details on which storage unit types (SUTs) may be used in which storage types.
在表"允许存储单位类型在每个存储类型下"的配置中配置每个存储类型下允许使用的存储单位类型
This table defines which storage unit type may be used within each storage type. Up to 10 storage units may be assigned per storage type.
这个表定义在每个存储类型下允许的存储单位类型.在一个存储类型下允许设置10个存储单位类型.
If more than 10 storage units are required per storage type, it is possible to activate the weak SUT check.
To do this, enter *** in this table as the allowed SUT. This has the effect that, in theory, all SUTs are allowed for this storage type. The system then searches for a bin that matches the storage unit type according to the allowed storage bin type per SUT.
如果超过十个,就可能需要缉获弱SUT检查,使用***代替存储单位类型.

3. Then the system searches for a suitable storage bin using the putaway strategy.
在上架策略中系统查找合适的存储BIN.
For this purpose you have assigned a storage bin type to each storage bin in the master data.
Via the table "Storage bin type search" the WMS finds information on which SUTs match which storage bin types.
The search for a subsequent storage bin type is restricted to the permitted storage bin types which are run through sequentially according to the sequence of entries in this table.
因为这个原因,需要在物料主数据中设置存储BIN类型.
查找存储BIN类型的顺序按这里定义的顺序.
4. If you manually enter the storage bin during putaway, the WMS checks if the SUT may be used on the relevant storage bin.如果你需要手工输入存储BIN在上架时.系统检查SUT中允许使用的存储BIN.
Requirements

The storage unit type check parameters must be activated.  This check is independent of a particular strategy. You can use it for all putaway strategies.
存储单位类型检查参数必须激活。这个检查是依赖于特定的策略。你可以在所有上架策略中使用

Recommendation

If you wish to implement the above weak SUT-check, check your table options exactly as performance problems may arise if the customizing option is not properly set.
如果你希望实现弱SUT检查,如果你的配置选项没有合适设置,检查表选项和出现的问题相同。
The following example should illustrate these problems and their solution:
下面例子说明这些问题和解决办法
Storage bin types P1 P2 P3 P4 P5 are allowed for storage unit type E1. E1 is to be placed in stock in storage type 001.  Here there are only storage bins of type P0.
存储BIN类型P1 P2 P3 P4 P5 是在存储单位类型E1下允许。E1是在存储类型001下。然而这里的存储BIN类型是P0.
Normally E1 would not be included in the storage unit types allowed for storage type 001.  The WMS recognizes this and searches for a bin in the next storage type.通常E1不允许包括在存储类型001下的存储单位类型下。系统建议下一个存储类型的查找BIN位。
A weak SUT check is when the database is accessed 5 times unsuccessfully.  This number increases depending on how many different storage sections you work with at one time.弱检查一般发生在5次未成功的情况下。这个号增加依赖于一次工作中有多少不同的存储区。
You can check the Customizing options via the storage bin determination log (transport order management). Multiple access to the database does not greatly impair performance.  The number of times the database is accessed in this way can be decreased using an optimized storage type search.
你可以通过存储BIN确定日志(传输订单管理)来检查配置。多次访问数据库没有极大影响性能。数据库的访问次数可以通过优化存储类型来查找。
Activities

Set the parameters for bin type search in the following sequence:
按下面顺序这是按BIN类型查找的参数
1. Bin types
Divide your storage bins into groups (for example, large bins, small bins).
将你的存储BIN分组(如大BIN,小BIN)
2. Check your warehouse master data and, if necessary, fill in any missing storage bin types.
检查你的仓库主数据,完成所有可能未建的存储BIN类型。
3. Storage unit types
Classify your storage units (for example, by palette type).
分类你的存储单位(如托盘)
4. Check your material masters and add palletization data, if this has not already been done.
检查你的物料主数据和增加堆数据,如果堆还没有准备好的话。
5. Allocation of storage unit types / storage type 分配存储单位类型到存储类型
For each storage type, define which storage unit types may be placed into stock in this storage type.
对每一个存储类型,定义其存储单位类型
6. Allocation of storage unit types / storage bin types
分配存储单位类型到存储BIN类型
For each storage bin type, define which storage unit type may be put away.
定义存储单位类型下允许的存储BIN类型
7. Activate the storage unit type control function in the putaway control parameters for the desired storage bin.
激活存储单位类型控制功能,在上架中对期望的存储BIN控制参数设置

版权声明:本文内容由阿里云实名注册用户自发贡献,版权归原作者所有,阿里云开发者社区不拥有其著作权,亦不承担相应法律责任。具体规则请查看《阿里云开发者社区用户服务协议》和《阿里云开发者社区知识产权保护指引》。如果您发现本社区中有涉嫌抄袭的内容,填写侵权投诉表单进行举报,一经查实,本社区将立刻删除涉嫌侵权内容。

分享:
数据库
使用钉钉扫一扫加入圈子
+ 订阅

分享数据库前沿,解构实战干货,推动数据库技术变革

其他文章
最新文章
相关文章