WM Activate Storage Section Search(十三)-阿里云开发者社区

开发者社区> 云计算> 正文
登录阅读全文

WM Activate Storage Section Search(十三)

简介: Activate Storage Section Search激活存储区查找In the Warehouse Management System (WMS), a storage section is found in the following manner:在WMS中,存储区查找是按下面原则的:1.
Activate Storage Section Search
激活存储区查找
In the Warehouse Management System (WMS), a storage section is found in the following manner:
在WMS中,存储区查找是按下面原则的:
1. If the WMS is to search for a suitable storage section, it first searches for a suitable storage type.  The storage type is determined during the storage type search.
如果WMS查找一个合适的存储区,首先会查找一个合适的存储类型.这个存储类型是在存储类型查找中定义的.
2. If the system has found a suitable storage type, it then determines the corresponding putaway strategy.  It finds this information in the "Storage type" table.
如果系统找到一个合适的存储类型,便确定合适的上架策略.这些信息是在"存储类型"表中.
3. Now the system must "know" into which storage section the material is to be placed.  The table "Storage section search", which you are setting here, provides this information.  This table contains a preference list for the storage sections into which the materials should preferably be stored.  The system first searches for a bin in the first storage section.  If it does not find a bin there, it continues its search in the second section, and so on.
系统必须知道物料可以放置在哪个存储区.在表"存储区查找",你可以设置,提供这些信息.这个表包括预制的物料最好放哪个存储区,系统先查找这个存储区,如果没有找到BIN位,则继续找第二个存储区.
4. In addition, you can influence the storage section search using the following indicators:
此外,还有一些指标影响存储区的查找
storage section indicator from the material master
storage class
在物料主数据存储类中存储区的查找标志
water pollution class (WPC)
水污染类(WPC)
The WMS only takes the indicators "Storage class" and "Water pollution class" into account if Hazardous Material Management has been activated.
如果有害物质管理激活,系统就只考虑
“存储类”和“水污染类”指标
To find out how to activate Hazardous Material management, refer to the section " Hazardous materials".
要找出如何激活有害物质的管理,请参阅节“有害物质”。
5. In the WMS, you can enter the storage bins for putaway manually.  In this case, the system checks whether the bin you have entered is in a storage section that is allowed for the material concerned.
在wms中,你可以在上架时手动输入存储BIN位.在着中情况,系统将检查这个BIN位是否是这个物料允许的存储区.
Requirements
前提
You must have the storage section check active. This check depends on the strategy you have chosen.  It can be implemented for all the putaway strategies, with the exception of the Fixed Bin Strategy.
你必须先激活存储区检查.这个检查依赖你是否在策略中是否选择.他可以在所有上架策略中实现,但固定BIN位策略除外.
Actions
Set the required parameters for the "Storage section check" in the sequence specified:
按顺序设置存储区检查的需要的参数
1. Storage section indicator 存储区标识
You can assign a storage section indicator to each material.  This indicator enables you to have materials placed into storage in special storage sections.
You define the valid storage section indicators in the corresponding table.
你可以给每个物料设置存储区表示.着允许物料放在这个存储区.
你可以在相应的表定义有效的存储区标识.
2. Storage section search 存储区查找
For each storage section indicator, you can have up to ten storage sections in one storage type.  During putaway, the system first looks for a bin in the first storage section; if it does not find a suitable bin here, it goes on to the next section, and so on.
对每个存储区表示,你可以在每个存储类型后设置10个存储区.在上架时,系统在第一个存储区找BIN位,如果没有找到,将会找下一个存储区
3. Activate the storage section search.
激活存储区查找

版权声明:本文内容由阿里云实名注册用户自发贡献,版权归原作者所有,阿里云开发者社区不拥有其著作权,亦不承担相应法律责任。具体规则请查看《阿里云开发者社区用户服务协议》和《阿里云开发者社区知识产权保护指引》。如果您发现本社区中有涉嫌抄袭的内容,填写侵权投诉表单进行举报,一经查实,本社区将立刻删除涉嫌侵权内容。

分享:
云计算
使用钉钉扫一扫加入圈子
+ 订阅

时时分享云计算技术内容,助您降低 IT 成本,提升运维效率,使您更专注于核心业务创新。

其他文章
最新文章
相关文章