[20170825]11G备库启用DRCP连接3.txt
--//昨天测试了11G备库启用DRCP连接,要设置alter system set audit_trail=none scope=spfile ;
--//参考链接http://blog.itpub.net/267265/viewspace-2144036/.
--//在测试过程中我遇到1个奇怪问题,就是如果主库没有打开drcp,备库执行exec dbms_connection_pool.start_pool();失败.
--//今天分析看看.
1.环境:
SYS@bookdg> @ ver1
PORT_STRING VERSION BANNER
------------------------------ -------------- --------------------------------------------------------------------------------
x86_64/Linux 2.4.xx 11.2.0.4.0 Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
SYS@bookdg> exec dbms_connection_pool.start_pool();
BEGIN dbms_connection_pool.start_pool(); END;
*
ERROR at line 1:
ORA-56501: DRCP: Pool startup failed
ORA-56501: DRCP: Pool startup failed
ORA-06512: at "SYS.DBMS_CONNECTION_POOL", line 4
ORA-06512: at line 1
--//在主库没有启动drcp的情况下,在备库启动会报错.
$ oerr ora 56501
56501, 0000, "DRCP: Pool startup failed"
// *Cause: The connection pool failed to start up.
// *Action: Check logs for details.
2.分析:
--//先做一个10046跟踪看看.
SYS@bookdg> @ &r/10046on 12
old 1: alter session set events '10046 trace name context forever, level &1'
new 1: alter session set events '10046 trace name context forever, level 12'
Session altered.
SYS@bookdg> exec dbms_connection_pool.start_pool();
BEGIN dbms_connection_pool.start_pool(); END;
*
ERROR at line 1:
ORA-56501: DRCP: Pool startup failed
ORA-56501: DRCP: Pool startup failed
ORA-06512: at "SYS.DBMS_CONNECTION_POOL", line 4
ORA-06512: at line 1
SYS@bookdg> @ &r/10046off
Session altered.
--//检查跟踪文件发现如下:
...
=====================
PARSING IN CURSOR #182929053448 len=274 dep=1 uid=0 oct=3 lid=0 tim=1503624921300601 hv=3872345143 ad='7e890610' sqlid='2s0zgjvmcym1r'
SELECT connection_pool_name, status, minsize, maxsize, incrsize, session_cached_cursors, inactivity_timeout,
max_think_time, max_use_session, max_lifetime_session, num_cbrok, maxconn_cbrok FROM cpool$ WHERE (connection_pool_name = :1)
END OF STMT
BINDS #182929053448:
Bind#0
oacdty=01 mxl=32(27) mxlc=00 mal=00 scl=00 pre=00
oacflg=00 fl2=0000 frm=01 csi=852 siz=32 off=0
kxsbbbfp=2a97747a38 bln=32 avl=27 flg=05
value="SYS_DEFAULT_CONNECTION_POOL"
EXEC #182929053448:c=999,e=178,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=1895327128,tim=1503624921300745
FETCH #182929053448:c=0,e=30,p=0,cr=2,cu=0,mis=0,r=1,dep=1,og=1,plh=1895327128,tim=1503624921300818
EXEC #182928806584:c=999,e=502,p=0,cr=2,cu=0,mis=0,r=0,dep=0,og=1,plh=0,tim=1503624921300951
ERROR #182928806584:err=56501 tim=1503624921300974
WAIT #182928806584: nam='SQL*Net break/reset to client' ela= 4 driver id=1650815232 break?=1 p3=0 obj#=5762 tim=1503624921301028
WAIT #182928806584: nam='SQL*Net break/reset to client' ela= 53 driver id=1650815232 break?=0 p3=0 obj#=5762 tim=1503624921301103
WAIT #182928806584: nam='SQL*Net message to client' ela= 2 driver id=1650815232 #bytes=1 p3=0 obj#=5762 tim=1503624921301128
*** 2017-08-25 09:35:25.227
WAIT #182928806584: nam='SQL*Net message from client' ela= 3926451 driver id=1650815232 #bytes=1 p3=0 obj#=5762 tim=1503624925227651
CLOSE #182928806584:c=0,e=41,dep=0,type=0,tim=1503624925227808
=====================
--//很明显因为访问底层基表cpool$
SYS@bookdg> @ &r/pt2 'select * from cpool$';
ROW_NUM COL_NUM COL_NAME COL_VALUE
------- ------- ---------------------- ----------------------------
1 1 CONNECTION_POOL_NAME SYS_DEFAULT_CONNECTION_POOL
2 STATUS INACTIVE
3 MINSIZE 4
4 MAXSIZE 40
5 INCRSIZE 2
6 SESSION_CACHED_CURSORS 20
7 INACTIVITY_TIMEOUT 300
8 MAX_THINK_TIME 120
9 MAX_USE_SESSION 500000
10 MAX_LIFETIME_SESSION 86400
11 NUM_CBROK 1
12 MAXCONN_CBROK 40000
12 rows selected.
--//而且在执行成功后STATUS='ACTIVE'.也就是exec dbms_connection_pool.start_pool();后如果STATUS='INACTIVE'要变成'状态是'ACTIVE'.
--//执行类似的dml语句,这在备库read only的情况下是不可行的.知道这个道理就明白为什么要在主库先执行exec dbms_connection_pool.start_pool();
--//修改STATUS='ACTIVE',这样备库也跟着修改.在备库执行exec dbms_connection_pool.start_pool();才能OK了.
3.有了以上知识,就可以通过一个特殊的例子说明问题.
--//在主库上执行如下,启动drcp.
SYS@book> exec dbms_connection_pool.start_pool()
PL/SQL procedure successfully completed.
--//检查备库
SYS@bookdg> @ &r/pt2 'select * from cpool$';
ROW_NUM COL_NUM COL_NAME COL_VALUE
------- ---------- ---------------------- ---------------------------
1 1 CONNECTION_POOL_NAME SYS_DEFAULT_CONNECTION_POOL
2 STATUS ACTIVE
3 MINSIZE 4
4 MAXSIZE 40
5 INCRSIZE 2
6 SESSION_CACHED_CURSORS 20
7 INACTIVITY_TIMEOUT 300
8 MAX_THINK_TIME 120
9 MAX_USE_SESSION 500000
10 MAX_LIFETIME_SESSION 86400
11 NUM_CBROK 1
12 MAXCONN_CBROK 40000
12 rows selected.
--//取消redo应用.
SYS@bookdg> alter database recover managed standby database cancel ;
Database altered.
--//在主库上执行如下,停止drcp.
SYS@book> exec dbms_connection_pool.stop_pool()
PL/SQL procedure successfully completed.
SYS@book> select CONNECTION_POOL_NAME,STATUS from cpool$;
CONNECTION_POOL_NAME STATUS
--------------------------- ---------
SYS_DEFAULT_CONNECTION_POOL INACTIVE
--//由于停止备库的日志应用,cpool$的记录不会修改.依旧是status='ACTIVE'
SYS@bookdg> select CONNECTION_POOL_NAME,STATUS from cpool$;
CONNECTION_POOL_NAME STATUS
--------------------------- -------
SYS_DEFAULT_CONNECTION_POOL ACTIVE
SYS@bookdg> exec dbms_connection_pool.start_pool();
PL/SQL procedure successfully completed.
$ sqlplus scott/book@192.168.100.40:1521/bookdg:POOLED
--//测试连接ok.
--//同样的道理在当前的状态,无法在备库执行exec dbms_connection_pool.stop_pool();因为这样要修改staus,
--//而只读数据库是无法执行dml语句的.
SYS@bookdg> exec dbms_connection_pool.stop_pool();
BEGIN dbms_connection_pool.stop_pool(); END;
*
ERROR at line 1:
ORA-56506: DRCP: Pool shutdown failed
ORA-56506: DRCP: Pool shutdown failed
ORA-06512: at "SYS.DBMS_CONNECTION_POOL", line 16
ORA-06512: at line 1
--//而同步应用日志后,status变成了'INACTIVE',在备库再执行停止drcp就ok了.
SYS@bookdg> alter database recover managed standby database using current logfile disconnect ;
Database altered.
SYS@bookdg> select CONNECTION_POOL_NAME,STATUS from cpool$;
CONNECTION_POOL_NAME STATUS
--------------------------- ---------
SYS_DEFAULT_CONNECTION_POOL INACTIVE
SYS@bookdg> exec dbms_connection_pool.stop_pool();
PL/SQL procedure successfully completed.
