DPA从DPA 10.0.352升级到DPA 11.0.373

[root@lnxmonitor tmp]# tar -xzvf SolarWinds-DPA-11.0.373-64bit.tar.gz 

DPAAdministratorGuide_11.0_RC.pdf

dpa_11_0_373_x64_installer/

dpa_11_0_373_x64_installer/dpa_11_0_373_x64_installer.sh

dpa_11_0_373_x64_installer/install.txt

dpa_11_0_373_x64_installer/readme.txt

UPGRADE INSTRUCTIONS

---------------------------------------------------------------------------

Prerequisite: System has an existing installation.

1. Install the new version of SolarWinds DPA on your existing server.

2. Disable cron jobs set up for SolarWinds DPA.

3. Run the shutdown.sh command from the old installation directory.

4. Locate the directory created when you installed the new version:

    /home/dpa_10_1_xxx       <= old installation home (may be ignite_8_x_xxx or dpa_9_x_xxx)

    /home/dpa_10_2_xxx       <= new SolarWinds DPA home

5. Copy or move these directories from the old to the new installation directory:

    WARNING: Do not copy hotfix files.

    cp -fr <OLD_home>/iwc/tomcat/ignite_config/* <NEW_home>/iwc/tomcat/ignite_config/

    cp -fr <OLD_home>/iwc/tomcat/logs/* <NEW_home>/iwc/tomcat/logs/

    mv <OLD_home>/iwc/tomcat/licensing <NEW_home>/iwc/tomcat/

6. If you are:

    - using LDAPS,

    - using SSL, or

    - changed the default SolarWinds DPA ports,

    then also complete the following tasks:

    a. Copy the keystore to the new installation:

        cp -fr <OLD_home>/iwc/tomcat/conf/.keystore  <NEW_home>/iwc/tomcat/conf/

    b. Edit <NEW_home>/iwc/tomcat/ignite_config/idc/system.properties file as follows:

       If the "javax.net.ssl.trustStore" entry is present, make sure it refers

       to a key store file inside the new DPA installation directory structure

       if possible.

       If the "com.confio.security.trustStore" entry is present, make sure it

       refers to a trust store file inside the new DPA installation directory

       structure if possible.

       If the referenced trust store file is in the new DPA installation

       directory structure, make sure the path is relative to the

       <NEW_home>/iwc/tomcat directory. For example, the absolute path

       "/home/user/dpa_10_2_xxx/iwc/tomcat/conf/.keystore" should be represented

       as "conf/.keystore" in the "com.confio.security.trustStore" entry.

    c. If you changed default port values or if you are using SSL on DPA 9.1.x or

       earlier, open server.xml from the old and the new installation

       directories.

    d. Copy over the appropriate values. Make sure that ports on the HTTP and

       HTTPS connector do not conflict. The files are located at:

        - <OLD_home>/iwc/tomcat/conf/server.xml

        - <NEW_home>/iwc/tomcat/conf/server.xml

7. If you disabled a cron job, update the path in those scripts to the new directory

   name and re-enable the job.

8. The upgrade is complete. The next step is to start SolarWinds DPA (see

   the section on Startup Instructions).

#chmod +x dpa_11_0_373_x64_installer.sh

#./dpa_11_0_373_x64_installer.sh

[root@lnxmonitor dpa_10_0_352]# ./shutdown.sh 

**************************************************************************

*

*  If this script fails you can manually stop the program by 

*  doing the following steps: 

*

*  1) Set the JAVA_HOME environment variable to your Java installation.

*  2) Add <JAVA_HOME>/bin to your PATH environment variable.

*  3) Go to the <DPA Home>/tomcat/bin directory. 

*  4) Run ./shutdown.sh 

*

*

***************************************************************************

Catalog exists...

Found java 1.6 or 1.7

JAVA HOME IS SET TO /home/solarwinds/dpa_10_0_352/iwc/jre_linux

PATH IS SET TO /home/solarwinds/dpa_10_0_352/iwc/jre_linux/bin:/usr/java/jdk1.7.0_25/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin

IBM Jvm Is Set To NO

Setting the -server option for JVM

JAVA_OPTS is  -server -Xss264k -Xms256m -Xmx1024m -XX:MaxPermSize=192m -Dcom.sun.management.jmxremote -Djava.net.preferIPv4Stack=true -Dnet.sf.ehcache.skipUpdateCheck=true

Using CATALINA_BASE:   /home/solarwinds/dpa_10_0_352/iwc/tomcat

Using CATALINA_HOME:   /home/solarwinds/dpa_10_0_352/iwc/tomcat

Using CATALINA_TMPDIR: /home/solarwinds/dpa_10_0_352/iwc/tomcat/temp

Using JRE_HOME:        /home/solarwinds/dpa_10_0_352/iwc/jre_linux

Using CLASSPATH:       /home/solarwinds/dpa_10_0_352/iwc/tomcat/bin/bootstrap.jar:/home/solarwinds/dpa_10_0_352/iwc/tomcat/ignite_config

**************************************************************************

*

*  DPA is shutting down. 

*

***************************************************************************

Exiting script after webserver stopped.

root@lnxmonitor solarwinds]# cp -fr /home/solarwinds/dpa_10_0_352/iwc/tomcat/ignite_config/* /home/solarwinds/dpa_11_0_373/iwc/tomcat/ignite_config/

[root@lnxmonitor solarwinds]# cp -fr /home/solarwinds/dpa_10_0_352/iwc/tomcat/logs/*  /home/solarwinds/dpa_11_0_373/iwc/tomcat/logs/

[root@lnxmonitor solarwinds]# mv /home/solarwinds/dpa_10_0_352/iwc/tomcat/licensing /home/solarwinds/dpa_11_0_373/iwc/tomcat/

[root@lnxmonitor solarwinds]# ls

dpa_10_0_352  dpa_11_0_373  dpa_9_1_85

[root@lnxmonitor solarwinds]# cd dpa_11_0_373/

[root@lnxmonitor dpa_11_0_373]# ls

iwc  license.txt  shutdown.sh  SolarWindsEula.rtf  startup.sh

[root@lnxmonitor dpa_11_0_373]# ./startup.sh 

**************************************************************************

*

*  If this script fails you can manually start the program by 

*  doing the following steps: 

*

*  1) Set the JAVA_HOME environment variable to your Java installation.

*  2) Add <JAVA_HOME>/bin to your PATH environment variable.

*  3) Go to the <DPA Home>/tomcat/bin directory. 

*  4) Run ./startup.sh 

*  5) Bring up the link (http://machine Name:8123 

*     or http://machine IP:8123) in your browser.

*

*

***************************************************************************

Catalog exists...

Found java 1.8

JAVA HOME IS SET TO /home/solarwinds/dpa_11_0_373/iwc/jre_linux

PATH IS SET TO /home/solarwinds/dpa_11_0_373/iwc/jre_linux/bin:/usr/java/jdk1.7.0_25/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin

The server port is 8127

The HTTP port is 8123

The HTTPS port is 8124

DPA is not running.

The port 8123 is open

The port 8124 is open

The port 8127 is open

Starting DPA

STACK_SIZE OVERRIDE = 

MIN_HEAP_MEMORY OVERRIDE = 

MAX_HEAP_MEMORY OVERRIDE = 

ADDITIONAL_JVM_OPTION = 

IBM Jvm Is Set To NO

Setting the -server option for JVM

JAVA_OPTS is  -server -Xss300k -Xms256m -Xmx1024m -Djava.net.preferIPv4Stack=true -Dnet.sf.ehcache.skipUpdateCheck=true

Tomcat started.

Waiting on initialization...please be patient

**************************************************************************

*

*  DPA has been launched, wait one minute then bring up 

*  one of the following links in your browser:

*

*  http://<Machine Name>:8123 or http://<Machine IP>:8123

*  https://<Machine Name>:8124 or https://<Machine IP>:8124

*

*  If the link does not work, check <iwc_dir>/tomcat/logs

*  and make sure a firewall is not running on this machine.

*

***************************************************************************

Exiting script after webserver launched.