AI 助理
文档备案控制台
开发者社区 云计算 文章 正文

STM32CubeMX OLED驱动

2024-07-12 364
版权
版权声明：
本文内容由阿里云实名注册用户自发贡献，版权归原作者所有，阿里云开发者社区不拥有其著作权，亦不承担相应法律责任。具体规则请查看《 阿里云开发者社区用户服务协议》和 《阿里云开发者社区知识产权保护指引》。如果您发现本社区中有涉嫌抄袭的内容，填写 侵权投诉表单进行举报，一经查实，本社区将立刻删除涉嫌侵权内容。
简介： STM32CubeMX OLED驱动

一、一次IIC通信过程


  1. 起始条件（Start Condition）:
  • 通信开始时，主设备发送一个起始条件信号。
  • 起始条件是SCL（时钟线）保持高电平时，SDA（数据线）从高电平切换到低电平。
  1. 发送地址和读/写位（Address and Read/Write Bit）:
  • 主设备发送目标设备的7位地址，加上一个读/写位，用于指示是读操作还是写操作。
  • 读操作时，读/写位为1；写操作时，读/写位为0。
  1. 从设备应答（Acknowledge）:
  • 主设备发送地址后，等待从设备的应答。
  • 从设备在下一个时钟周期内拉低SDA表示应答。
  1. 数据传输（Data Transfer）:
  • 在设备的应答后，可以开始传输数据。
  • 数据传输是8位的数据字节，每个字节的传输都会在一个时钟周期内完成。
  • 数据传输时，SDA的每个位都在SCL的时钟脉冲上升沿之前被设置或读取。
  1. 停止条件（Stop Condition）:
  • 数据传输完成后，主设备发送停止条件信号。
  • 停止条件是SCL保持高电平时，SDA从低电平切换到高电平。


二、CubeMX配置


用到的函数

HAL_I2C_Master_Transmit(&hi2c1, DevAddress, pData, Size, Timeout);
HAL_I2C_Master_Receive(&hi2c1, DevAddress, pData, Size, Timeout);


在之前pwm的基础上打开IIC1，选择高速传输，400000HZ



直接生成工程，然后新建txt文件将代码复制进去更改后缀，添加以下路径




三、代码

oled.c

#include "oled.h"
#include "i2c.h"
#include "oledfont.h"          //头文件
 
uint8_t CMD_Data[]={
0xAE, 0x00, 0x10, 0x40, 0xB0, 0x81, 0xFF, 0xA1, 0xA6, 0xA8, 0x3F,
          
0xC8, 0xD3, 0x00, 0xD5, 0x80, 0xD8, 0x05, 0xD9, 0xF1, 0xDA, 0x12,
          
0xD8, 0x30, 0x8D, 0x14, 0xAF};      //初始化命令
 
 
void WriteCmd(void)
{
  uint8_t i = 0;
  for(i=0; i<27; i++)
  {
    HAL_I2C_Mem_Write(&hi2c1 ,0x78,0x00,I2C_MEMADD_SIZE_8BIT,CMD_Data+i,1,0x100);
  }
}
//向设备写控制命令
void OLED_WR_CMD(uint8_t cmd)
{
  HAL_I2C_Mem_Write(&hi2c1 ,0x78,0x00,I2C_MEMADD_SIZE_8BIT,&cmd,1,0x100);
}
//向设备写数据
void OLED_WR_DATA(uint8_t data)
{
  HAL_I2C_Mem_Write(&hi2c1 ,0x78,0x40,I2C_MEMADD_SIZE_8BIT,&data,1,0x100);
}
//初始化oled屏幕
void OLED_Init(void)
{   
  HAL_Delay(200);
 
  WriteCmd();
}
//清屏
void OLED_Clear(void)
{
  uint8_t i,n;        
  for(i=0;i<8;i++)  
  {  
    OLED_WR_CMD(0xb0+i);
    OLED_WR_CMD (0x00); 
    OLED_WR_CMD (0x10); 
    for(n=0;n<128;n++)
      OLED_WR_DATA(0);
  } 
}
//开启OLED显示    
void OLED_Display_On(void)
{
  OLED_WR_CMD(0X8D);  //SET DCDC命令
  OLED_WR_CMD(0X14);  //DCDC ON
  OLED_WR_CMD(0XAF);  //DISPLAY ON
}
//关闭OLED显示     
void OLED_Display_Off(void)
{
  OLED_WR_CMD(0X8D);  //SET DCDC命令
  OLED_WR_CMD(0X10);  //DCDC OFF
  OLED_WR_CMD(0XAE);  //DISPLAY OFF
}            
void OLED_Set_Pos(uint8_t x, uint8_t y) 
{   
  OLED_WR_CMD(0xb0+y);
  OLED_WR_CMD(((x&0xf0)>>4)|0x10);
  OLED_WR_CMD(x&0x0f);
} 
 
void OLED_On(void)  
{  
  uint8_t i,n;        
  for(i=0;i<8;i++)  
  {  
    OLED_WR_CMD(0xb0+i);    //设置页地址（0~7）
    OLED_WR_CMD(0x00);      //设置显示位置—列低地址
    OLED_WR_CMD(0x10);      //设置显示位置—列高地址   
    for(n=0;n<128;n++)
      OLED_WR_DATA(1); 
  } //更新显示
}
unsigned int oled_pow(uint8_t m,uint8_t n)
{
  unsigned int result=1;   
  while(n--)result*=m;    
  return result;
}
//显示2个数字
//x,y :起点坐标  
//len :数字的位数
//size:字体大小
//mode:模式 0,填充模式;1,叠加模式
//num:数值(0~4294967295);       
void OLED_ShowNum(uint8_t x,uint8_t y,unsigned int num,uint8_t len,uint8_t size2)
{           
  uint8_t t,temp;
  uint8_t enshow=0;              
  for(t=0;t<len;t++)
  {
    temp=(num/oled_pow(10,len-t-1))%10;
    if(enshow==0&&t<(len-1))
    {
      if(temp==0)
      {
        OLED_ShowChar(x+(size2/2)*t,y,' ',size2);
        continue;
      }else enshow=1; 
       
    }
    OLED_ShowChar(x+(size2/2)*t,y,temp+'0',size2); 
  }
} 
//在指定位置显示一个字符,包括部分字符
//x:0~127
//y:0~63
//mode:0,反白显示;1,正常显示         
//size:选择字体 16/12 
void OLED_ShowChar(uint8_t x,uint8_t y,uint8_t chr,uint8_t Char_Size)
{       
  unsigned char c=0,i=0;  
    c=chr-' ';//得到偏移后的值     
    if(x>128-1){x=0;y=y+2;}
    if(Char_Size ==16)
      {
      OLED_Set_Pos(x,y);  
      for(i=0;i<8;i++)
      OLED_WR_DATA(F8X16[c*16+i]);
      OLED_Set_Pos(x,y+1);
      for(i=0;i<8;i++)
      OLED_WR_DATA(F8X16[c*16+i+8]);
      }
      else {  
        OLED_Set_Pos(x,y);
        for(i=0;i<6;i++)
        OLED_WR_DATA(F6x8[c][i]);
        
      }
}
 
//显示一个字符号串
void OLED_ShowString(uint8_t x,uint8_t y,uint8_t *chr,uint8_t Char_Size)
{
  unsigned char j=0;
  while (chr[j]!='\0')
  {   OLED_ShowChar(x,y,chr[j],Char_Size);
      x+=8;
    if(x>120){x=0;y+=2;}
      j++;
  }
}
//显示128x64 BMP图片
void OLED_Draw12864BMP(uint8_t BMP[])
{
    //显示显示BMP图片128×64 
    uint16_t j=0;
    uint8_t x,y;
    for(y=0; y<8; y++)
    {
        OLED_Set_Pos(0,y);
        for(x=0; x<128; x++)
        {
#if DISPLAY_MODE
            OLED_WR_DATA(BMP[y]);
#else
            OLED_WR_DATA(BMP[j++]);
#endif
        }
    }
}
//显示汉字
//hzk 用取模软件得出的数组
void OLED_ShowCHinese(uint8_t x,uint8_t y,uint8_t no)
{               
  uint8_t t,adder=0;
  OLED_Set_Pos(x,y);  
    for(t=0;t<16;t++)
    {
        OLED_WR_DATA(Hzk[2*no][t]);
        adder+=1;
     }  
    OLED_Set_Pos(x,y+1);  
    for(t=0;t<16;t++)
      { 
        OLED_WR_DATA(Hzk[2*no+1][t]);
        adder+=1;
      }         
}


oled.h

#ifndef __OLED_H__
#define __OLED_H__
 
#include "stm32f1xx_hal.h"
 
///
#define   OLED_GPIO_CLK_ENABLE()         __HAL_RCC_GPIOA_CLK_ENABLE()
 
#define   GPIOx_OLED_PORT               GPIOB
#define   OLED_SCK_PIN                  GPIO_PIN_6
#define   OLED_SCK_ON()                 HAL_GPIO_WritePin(GPIOx_OLED_PORT, OLED_SCK_PIN, GPIO_PIN_SET)
#define   OLED_SCK_OFF()                HAL_GPIO_WritePin(GPIOx_OLED_PORT, OLED_SCK_PIN, GPIO_PIN_RESET)
#define   OLED_SCK_TOGGLE()             HAL_GPIO_TogglePin(GPIOx_OLED_PORT, OLED_SCK_PIN)
#define   OLED_SDA_PIN                  GPIO_PIN_7
#define   OLED_SDA_ON()                 HAL_GPIO_WritePin(GPIOx_OLED_PORT, OLED_SDA_PIN, GPIO_PIN_SET)
#define   OLED_SDA_OFF()                HAL_GPIO_WritePin(GPIOx_OLED_PORT, OLED_SDA_PIN, GPIO_PIN_RESET)
#define   OLED_SDA_TOGGLE()             HAL_GPIO_TogglePin(GPIOx_OLED_PORT, OLED_SDA_PIN)
///
 
void WriteCmd(void);
void OLED_WR_CMD(uint8_t cmd);
void OLED_WR_DATA(uint8_t data);
void OLED_Init(void);
void OLED_Clear(void);
void OLED_Display_On(void);
void OLED_Display_Off(void);
void OLED_Set_Pos(uint8_t x, uint8_t y);
void OLED_On(void);
void OLED_ShowNum(uint8_t x,uint8_t y,unsigned int num,uint8_t len,uint8_t size2);
void OLED_ShowChar(uint8_t x,uint8_t y,uint8_t chr,uint8_t Char_Size);
void OLED_ShowString(uint8_t x,uint8_t y,uint8_t *chr,uint8_t Char_Size);
void OLED_ShowCHinese(uint8_t x,uint8_t y,uint8_t no);
void OLED_Draw12864BMP(uint8_t BMP[]);
 
#endif


oledfnt.h

#ifndef __OLEDFONT_H__
#define __OLEDFONT_H__
 
#include "stm32f1xx_hal.h"
 
//8*6 ASCII字符集点阵
const unsigned char F6x8[][6] =   
{
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
  0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
  0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
  0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
  0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
  0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
  0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
  0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
  0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
  0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
  0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
  0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
  0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
  0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
  0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
  0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
  0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
  0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
  0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
  0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
  0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
  0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
  0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
  0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
  0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
  0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
  0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
  0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
  0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
  0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
  0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
  0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
  0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
  0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
  0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
  0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
  0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
  0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
  0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
  0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
  0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
  0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
  0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
  0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
  0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
  0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
  0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
  0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
  0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
  0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
  0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
  0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
  0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
  0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
  0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
  0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
  0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
  0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
  0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
  0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
  0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
  0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
  0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
  0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
  0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
  0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
  0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
  0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
  0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
  0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
  0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
  0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
  0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
  0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
  0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
  0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
  0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
  0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
  0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
  0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
  0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
  0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
  0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
  0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
  0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
  0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
  0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
  0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
  0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
  0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
  0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
  0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};
 
//16*8 ASCII字符集点阵
const unsigned char F8X16[]=
{
 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//sp /0
 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//!  /1
 0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//"  /2
 0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//#  /3
 0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$  /4
 0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//%  /5
 0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//&  /6
 0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//'  /7
 0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//(  /8
 0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//)  /9
 0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//*  /10
 0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+  /11
 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//,  /12
 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//-  /13
 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//.  /14
 0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,///  /15
 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0  /16
 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1  /17
 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2  /18
 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3  /19
 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4  /20
 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5  /21
 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6  /22
 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7  /23
 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8  /24
 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9  /25
 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//:  /26
 0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//;  /27
 0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//<  /28
 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//=  /29
 0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//>  /30
 0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//?  /31
 0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@  /32
 0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A  /33
 0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B  /34
 0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C  /35
 0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D  /36
 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E  /37
 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F  /38
 0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G  /39
 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H  /40
 0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I  /41
 0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J  /42
 0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K  /43
 0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L  /44
 0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M  /45
 0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N  /46
 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O  /47
 0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P  /48
 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q  /49
 0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R  /50
 0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S  /51
 0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T  /52
 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U  /53
 0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V  /54
 0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W  /55
 0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X  /56
 0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y  /57
 0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z  /58
 0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[  /59
 0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\  /60
 0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//]  /61
 0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^  /62
 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_  /63
 0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//`  /64
 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a  /65
 0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b  /66
 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c  /67
 0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d  /68
 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e  /69
 0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f  /70
 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g  /71
 0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h  /72
 0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i  /73
 0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j  /74
 0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k  /75
 0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l  /76
 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m  /77
 0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n  /78
 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o  /79
 0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p  /80
 0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q  /81
 0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r  /82
 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s  /83
 0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t  /84
 0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u  /85
 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v  /86
 0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w  /87
 0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x  /88
 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y  /89
 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z  /90
 0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{  /91
 0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//}  /92
 0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00};//|  /93
 
//部分汉字
const unsigned char Hzk[][32]=
{
  {0x00,0x00,0x80,0xE0,0xF8,0x38,0x40,0x70,0x7C,0xEC,0x60,0xA0,0x60,0x60,0x00,0x00},
  {0x00,0x01,0x00,0x1F,0x3F,0x00,0x04,0x0E,0x30,0x3F,0x3F,0x00,0x00,0x0E,0x04,0x00},/*"你",0*/
 
  {0x00,0x80,0x80,0x80,0xF8,0xF8,0xC0,0xC0,0x10,0x90,0xD8,0xF8,0xB8,0x98,0x80,0x00},
  {0x00,0x01,0x01,0x0B,0x0D,0x06,0x0F,0x18,0x11,0x11,0x39,0x3F,0x00,0x00,0x01,0x00},/*"好",1*/
 
  {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
  {0x00,0x00,0x00,0x58,0x78,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"，",2*/
 
  {0x00,0x00,0x20,0xB0,0xD8,0xC8,0x00,0xF8,0xF8,0xA8,0xEC,0xFC,0x88,0x00,0x00,0x00},
  {0x00,0x02,0x03,0x3F,0x3F,0x00,0x00,0x3F,0x3F,0x1B,0x06,0x0D,0x0D,0x0C,0x08,0x00},/*"很",3*/
 
  {0x00,0x00,0x20,0x30,0x30,0xF0,0xD0,0xDC,0xBC,0xF0,0x50,0x10,0x10,0x10,0x00,0x00},
  {0x00,0x00,0x00,0x3E,0x3E,0x02,0x1E,0x1F,0x1D,0x0D,0x25,0x79,0x3F,0x0E,0x00,0x00},/*"高",4*/
 
  {0x00,0x00,0x00,0x20,0x60,0xE0,0x18,0x30,0xB0,0xC0,0xF8,0xB8,0x90,0x80,0x00,0x00},
  {0x00,0x00,0x02,0x03,0x13,0x1F,0x0D,0x05,0x01,0x05,0x1D,0x19,0x19,0x03,0x02,0x00},/*"兴",5*/
 
  {0x00,0x00,0x00,0xF8,0xF8,0x38,0xE8,0xE8,0x0C,0xFC,0xF8,0x00,0x00,0x00,0x00,0x00},
  {0x00,0x00,0x10,0x19,0x0D,0x0F,0x07,0x1F,0x1E,0x31,0x30,0x30,0x30,0x38,0x1C,0x00},/*"见",6*/
 
  {0x00,0x00,0x80,0xC8,0xF8,0xB8,0xD8,0x48,0xC8,0x00,0xE0,0x00,0xFC,0xF8,0x00,0x00},
  {0x00,0x00,0x10,0x10,0x16,0x1F,0x0F,0x0A,0x08,0x00,0x03,0x10,0x3F,0x3F,0x00,0x00},/*"到",7*/
 
  {0x00,0x00,0x80,0xE0,0xF8,0x38,0x40,0x70,0x7C,0xEC,0x60,0xA0,0x60,0x60,0x00,0x00},
  {0x00,0x01,0x00,0x1F,0x3F,0x00,0x04,0x0E,0x30,0x3F,0x3F,0x00,0x00,0x0E,0x04,0x00},/*"你",8*/
 
  {0x00,0x00,0x00,0xF8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},
  {0x00,0x00,0x00,0x1B,0x1B,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00},/*"！",9*/
/* (16 X 16 , 可口可乐在乎体 )*/
};
 
#endif


汉字取模网站LCD/OLED(多字体,升级版)汉字字模提取软件,GB2312中文点阵字库取模

将取模的汉字用上面格式添加进去

运行效果



原文

【CubeMX配置STM32并驱动0.96寸OLED】_cubemx 配置stm32驱动i2c oled-CSDN博客

关键词：
STM32 oled
STM32驱动
STM32 oled驱动
chem4111
目录
相关文章
AI研究者手札
|
8月前
|
存储 编解码 开发者
基于STM32和OLED的小恐龙游戏项目设计与实现【免费开源】
小恐龙游戏最初是作为浏览器离线小游戏而广为人知，其简单的操作与生动的画面使其深受用户喜爱。本项目将经典的小恐龙跳跃游戏移植到嵌入式平台上，使用STM32微控制器作为核心控制器，OLED屏幕进行显示，搭配按键或触摸实现用户交互。通过本项目，既可以体验游戏开发在嵌入式系统上的实现方式，又能掌握STM32 GPIO、定时器、OLED驱动、按键扫描及简单动画实现技术。
AI研究者手札
601 2
基于STM32和OLED的小恐龙游戏项目设计与实现【免费开源】
chem4111
STM32Cubemx PWM驱动加湿器模拟火山喷发效果
STM32Cubemx PWM驱动加湿器模拟火山喷发效果
chem4111
427 14
chem4111
STM32Cubemx PWM驱动SG90舵机
STM32Cubemx PWM驱动SG90舵机
chem4111
1123 13
chem4111
STM32CubeMX mpu6050驱动
STM32CubeMX mpu6050驱动
chem4111
353 10
chem4111
STM32CubeMX EC11旋转编码器驱动
STM32CubeMX EC11旋转编码器驱动
chem4111
2058 10
chem4111
STM32CubeMX WS2812B灯驱动
STM32CubeMX WS2812B灯驱动
chem4111
2155 1
chem4111
STM32CubeMX ULN2003步进电机驱动
STM32CubeMX ULN2003步进电机驱动
chem4111
498 0
小王老师呀
|
传感器
手把手在STM32F103C8T6上构建可扩展可移植的DHT11驱动
【8月更文挑战第29天】本文详细介绍在STM32F103C8T6上构建可扩展且可移植的DHT11温湿度传感器驱动的步骤，包括硬件与软件准备、硬件连接、驱动代码编写及测试。通过这些步骤，可根据实际项目需求优化和扩展代码。
小王老师呀
862 0
chem4111
STM32Cubemx TB6612直流电机驱动
STM32Cubemx TB6612直流电机驱动
chem4111
1422 0
孤影过客
使用STM32F103标准库实现定时器控制LED点亮和关闭
通过这篇博客，我们学习了如何使用STM32F103标准库，通过定时器来控制LED的点亮和关闭。我们配置了定时器中断，并在中断处理函数中实现了LED状态的切换。这是一个基础且实用的例子，适合初学者了解STM32定时器和中断的使用。 希望这篇博客对你有所帮助。如果有任何问题或建议，欢迎在评论区留言。
孤影过客
1692 2

热门文章

最新文章

  • 1
    STM32第五章-串口通讯详解
  • 2
    【STM32 .Net MF开发板学习-04】TinyGUI位图显示
  • 3
    基于STM32与FreeRTOS的四轴机械臂项目-1
  • 4
    STM32F407硬件I2C实现MPU6050通讯（CUBEIDE)
  • 5
    【蓝桥杯嵌入式】PWM的设置，原理图解析与代码实现（第十一届省赛为例）——STM32
  • 6
    基于STM32的环境监测系统 (esp8267)（下）
  • 7
    STM32中断详解及其编程实践
  • 8
    用GCC开发STM32入门一(使用官方库)
  • 9
    STM32速成笔记（五）—串口通信
  • 10
    STM32启动详细流程分析（一）
  • 1
    STM32的SPI双机通信实现
    738
  • 2
    基于STM32定时器外部计数模式实现方波频率测量
    876
  • 3
    基于STM32和51单片机的8位全彩流水灯程序模板
    757
  • 4
    STM32 温度 PID 控制系统实现
    1207
  • 5
    STM32直流充电桩主控方案【源程序+原理图+PCB】
    451
  • 6
    基于STM32的人体健康监测系统设计与实现（温度、心率、老人摔倒检测）【开源免费】
    1952
  • 7
    基于STM32单片机的智能晾衣架设计与实现【开源免费】
    492
  • 8
    基于STM32和OLED的小恐龙游戏项目设计与实现【免费开源】
    601
  • 9
    基于STM32和FreeRTOS的实时天气系统设计与实现【免费开源】
    1519
  • 10
    基于STM32和FreeRTOS的智能手环项目设计与实现【免费开源】
    884

    • 相关课程

    更多
  • 基于STM32的端到端物联网全栈开发

    • 相关电子书

    更多
  • 低代码开发师（初级）实战教程
  • 冬季实战营第三期：MySQL数据库进阶实战
  • 阿里巴巴DevOps 最佳实践手册
    • 下一篇
    PHP：将本地文件上传到阿里云OSS存储