Motorola VMIVME-7452 单插槽 VMEbus 软盘/硬盘模块

简介: VMIVME-7452 是一款无源 VMEbus 板卡,配有一个 3.5" 1.44 MB 软驱和一个硬盘,还可选配一个闪存驱动器。它采用标准 6U 单插槽外形尺寸,功耗低。设计兼容 VMIC 的 VMEbus PC/AT SBC 板卡(兼容型号请参阅规格书)。规格包括闪存驱动器的尺寸(160 x 233.25 x 20.32 毫米)、环境温度范围和数据传输速率。电源要求为 +5 V、最大 2.5 A(启动)和通常 1.0 A。电路板还列出了兼容附件和相关产品,包括输入/输出模块、充电控制器和通信板。

• Optional Flash drive

• 3.5-inch 1.44 Mbyte floppy drive

• Standard VMEbus 6U single-slot form factor

• Low power

INTRODUCTION —

The VMIVME-7452 is a passive board that holds one floppy and one hard drive with an optional Flash drive available.

The board is a 6U VMEbus form factor, deriving its power from the standard VMEbus P1 and P2.

The VMIVME-7452 has been designed to interface to VMIC’s line of VMEbus-compatible PC/AT SBC boards.

These SBC boards incorporate the floppy and IDE controllers on-board. Refer to the compatible SBC list in this specification.

SPECIFICATIONS

Physical Dimensions: Standard VME double height Eurocard (one slot)

160 x 233.25 x 20.32 mm

User Connectors: 34-pin floppy drive 40-pin IDE

Ambient Temperature:

All Disks: 5 to 50 ˚C, operating

Storage: -25 to 60 ˚C

Rate: 20 ˚C per hr maximum

Humidity: 20 to 80 percent, noncondensing, maximum

wet bulb 29 ˚C

Hard Drive Access Time:

Average Access Time: 14 ms

Average Latency: 6.67 ms

Power Requirements:

+5 V, 2.5 A maximum (spinup)

<1.0 A typical

Flash Drive System Performance:

Data Transfer Rate to Flash: 4.0 Mbyte/s burst

Data Transfer Rate from Flash: 6.0 Mbyte/s burst

Sleep to Write: 2.5 ms maximum

Sleep to Read: 2.0 ms maximum

Reset to Ready: 50 ms, typical, 400 ms, maximum

Flash Drive System Performance:

DC Input Voltage (Commercial): 5 V ±10%,

3.3 V ±5%

Power Consumption:

Sleep: 200 µA at 3.3 V, 500 µA at 5.0 V

Read: 32 to 80 mA at 3.3 V, 46 to 120 mA at 5.0 V

Write: 32 to 80 mA at 3.3 V, 46 to 120 mA at 5.0 V

Compatible SBC Boards:

VMIVME-7591 VMIVME-7698

VMIVME-7592 VMIVME-7740

VMIVME-7695 VMIVME-7750

VMIVME-7697 VMIVME-7751

VMIVME-7697A VMIVME-7765

Related Products:

IC660TBA026M Current Source Analog Input I/O Block and Accessory Kit

IC660TBD024K Genius I/O Terminal Assembly Module

IC660TBD025 Genius I/O Terminal Assembly Module

BSFC-02C Charge Controller Universal Brake Chopper

C150/0000/STD DIN Universal Process Indicator

C1627A Silicon NPN Transistor Bus Manager Module

DS200LDCCH1AGA Drive Control/LAN Communication Board

DS200LDCCH1ALA Drive Control/LAN Communication Board

1B30035H01 Process control base

IC687BEM713B Fanuc90-70 Series Bus Transmitter Unit

1756-DMF30 Drive Module

1756-DNB Communication Module

相关文章
|
5月前
服务器做raid bios界面做raid配置
服务器做raid bios界面做raid配置
33 0
MOTOROLA FAB 0340-1049 在服务器主板上的PCI-X支持
MOTOROLA FAB 0340-1049 在服务器主板上的PCI-X支持
112 0
MOTOROLA FAB 0340-1049 在服务器主板上的PCI-X支持
制作U盘启动时【usb-hdd和usb-zip的区别】
制作U盘启动时【usb-hdd和usb-zip的区别】
767 0
制作U盘启动时【usb-hdd和usb-zip的区别】
|
存储 IDE 固态存储
10.1 硬盘结构(机械硬盘和固态硬盘)详解
在 Linux 系统中,文件系统是创建在硬盘上的,因此,要想彻底搞清楚文件系统的管理机制,就要从了解硬盘开始。
458 0
10.1 硬盘结构(机械硬盘和固态硬盘)详解
如何进入PE优盘系统
感谢您的支持。我们尽可能的会把教程写的详细,严谨一些。这样您可以学到真正的装机知识。 注意: 本教程只适用于我们的U盘产品,其它不适用。
775 0
|
虚拟化 内存技术
制作 ESXi 5.1 的USB闪存"引导安装"盘
制作 ESXi 5.1 的USB闪存"引导安装"盘 1 准备工作 linux 系统    //我这里是ubuntu 12.04 U盘一个       //8GB kingston ESXi ISO文件  //vmware 官网下载 VMware-VMvisor-Installer-5.
1294 0