1.解压图为提供的Linux_for_Tegra.gz
sudo tar zxvf Linux_for_Tegra.gz
2.复制板载驱动到对应的目录
cp t200_v1.3/Linux_for_Tegra/* Linux_for_Tegra/ -rf
3.切换到对应的目录
cd Linux_for_Tegra/
4.进入recovery模式
reset+recovery按键
(base) simp@simp-GP65-Leopard-10SEK:~/JetPack4.4_T200/Linux_for_Tegra$ lsusb Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 1038:1122 SteelSeries ApS Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 2717:5018 Bus 001 Device 006: ID 8087:0026 Intel Corp. Bus 001 Device 005: ID 04f2:b695 Chicony Electronics Co., Ltd Bus 001 Device 008: ID 0955:7c18 NVidia Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
5.烧写原始镜像到tx2
sudo ./flash.sh jetson-tx2 mmcblk0p1
6.开机后进行相关的配置
7.进入recovery模式
8.备份镜像
sudo ./flash.sh -r -k APP -G tx2.img jetson-tx2 mmcblk0p1
9.删除文件系统中的内容和删除安装过程中产生的镜像
cd rootfs/ sudo rm -rf * cd .. cd bootloader/ sudo rm system.img sudo rm system.img.raw
10将备份好的镜像放入到然后重命名为system.img
mv tx2.img bootloader/system.img
11.执行烧写命令
sudo ./flash.sh -r jetson-tx2 mmcblk0p1
