第一步配置ip地址
[Huawei]sys ar1 [ar1] [ar1] <ar1>sys Enter system view, return user view with Ctrl+Z. [ar1]int g0/0/0 [ar1-GigabitEthernet0/0/0]ip ad [ar1-GigabitEthernet0/0/0]ip address 1.1.1.2 24 Mar 2 2020 14:10:05-08:00 ar1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [ar1-GigabitEthernet0/0/0]ip address 1.1.1.1 24 ************************************************************************************************* <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sys ar2 [ar2] [ar2]int g0/0/0 [ar2-GigabitEthernet0/0/0]ip ad [ar2-GigabitEthernet0/0/0]ip address 1.1.1.2 24 [ar2-GigabitEthernet0/0/0]quit [ar2]int g0/0/1 [ar2-GigabitEthernet0/0/1]ip a [ar2-GigabitEthernet0/0/1]ip add [ar2-GigabitEthernet0/0/1]ip address 2.2.2.1 24 ************************************************************************************************* <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sys ar3 [ar3] [ar3]int g0/0/0 [ar3-GigabitEthernet0/0/0]ip ad [ar3-GigabitEthernet0/0/0]ip address 2.2.2.2 24 Mar 2 2020 14:17:36-08:00 ar3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [ar3-GigabitEthernet0/0/0]quit [ar3]int g0/0/1 [ar3-GigabitEthernet0/0/1]ip ad [ar3-GigabitEthernet0/0/1]ip address 3.3.3.1 24 [ar3-GigabitEthernet0/0/1] Mar 2 2020 14:18:11-08:00 ar3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. ************************************************************************************************* <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sys ar4 <ar4>sys Enter system view, return user view with Ctrl+Z. [ar4]int g0/0/0 [ar4-GigabitEthernet0/0/0]ip ad [ar4-GigabitEthernet0/0/0]ip address 3.3.3.2 24 [ar4-GigabitEthernet0/0/0]qui [ar4-GigabitEthernet0/0/0]quit [ar4]int g0/0/1 [ar4-GigabitEthernet0/0/1]ip ad [ar4-GigabitEthernet0/0/1]ip address 4.4.4.1 24 Mar 2 2020 14:19:13-08:00 ar4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. ************************************************************************************** <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sys ar5 <ar5>sys Enter system view, return user view with Ctrl+Z. [ar5]int [ar5]interface g [ar5]interface GigabitEthernet 0/0/0 [ar5-GigabitEthernet0/0/0]ip ad [ar5-GigabitEthernet0/0/0]ip address 4.4.4.2 24 Mar 2 2020 14:19:55-08:00 ar5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [ar5-GigabitEthernet0/0/0]qui [ar5-GigabitEthernet0/0/0]quit [ar5]int g [ar5]int GigabitEthernet 0/0/1 [ar5-GigabitEthernet0/0/1]ip ad [ar5-GigabitEthernet0/0/1]ip address 5.5.5.1 24 Mar 2 2020 14:41:40-08:00 ar5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [ar5-GigabitEthernet0/0/1] ********************************************************************************************* <Huawei>sys Enter system view, return user view with Ctrl+Z. [Huawei]sys ar8 [ar8] Please check whether system data has been changed, and save data in time Configuration console time out, please press any key to log on <ar8>sys Enter system view, return user view with Ctrl+Z. [ar8]int [ar8]interface g [ar8]interface GigabitEthernet 0/0/0 [ar8-GigabitEthernet0/0/0]ip ad [ar8-GigabitEthernet0/0/0]ip address 5.5.5.2 24
第二步ospf协议配置
<ar1>sys Enter system view, return user view with Ctrl+Z. [ar1]ospf [ar1-ospf-1]area 0 [ar1-ospf-1-area-0.0.0.0]net 1.1.1.0 0.0.0.255 [ar1-ospf-1-area-0.0.0.0] 上面配置错误 需要重新配置 使用undo [ar1-ospf-1-area-0.0.0.0]undo net 1.1.1.0 0.0.0.255 [ar1-ospf-1-area-0.0.0.0]quit [ar1-ospf-1]undo area 0 [ar1-ospf-1]area 1 [ar1-ospf-1-area-0.0.0.1] [ar1-ospf-1-area-0.0.0.1]net 1.1.1.0 0.0.0.255 ************************************************************************** <ar2>sys Enter system view, return user view with Ctrl+Z. [ar2]ospf [ar2-ospf-1]area 1 [ar2-ospf-1-area-0.0.0.1]net 1.1.1.0 0.0.0.255 [ar2-ospf-1-area-0.0.0.1]area 0 [ar2-ospf-1-area-0.0.0.0] [ar2-ospf-1-area-0.0.0.0]net 2.2.2.0 0.0.0.255 [ar2-ospf-1-area-0.0.0.0] ******************************************************************************************* [ar3]ospf [ar3-ospf-1]area 0 [ar3-ospf-1-area-0.0.0.0]net 2.0.0.0 0.0.0.255 [ar3-ospf-1-area-0.0.0.0]undo 2.0.0.0 0.0.0.255 ^ Error: Unrecognized command found at '^' position. [ar3-ospf-1-area-0.0.0.0]undo net 2.0.0.0 0.0.0.25 [ar3-ospf-1-area-0.0.0.0]net 2.2.2.0 0.0.0.255 [ar3-ospf-1-area-0.0.0.0]net 3.3.3.0 0.0.0.255 ************************************************************************************************* <ar4>sys Enter system view, return user view with Ctrl+Z. [ar4]ospf [ar4-ospf-1]area 0 [ar4-ospf-1-area-0.0.0.0]net 3.3.3.0 0.0.0.255 [ar4-ospf-1-area-0.0.0.0]area 2 [ar4-ospf-1-area-0.0.0.2] [ar4-ospf-1-area-0.0.0.2]net 4.4.4.0 0.0.0.255 [ar4-ospf-1-area-0.0.0.2] *********************************************************************************** <ar5>sys Enter system view, return user view with Ctrl+Z. [ar5]ospf [ar5-ospf-1]area 2 [ar5-ospf-1-area-0.0.0.2]net 4.4.4.0 0.0.0.255 [ar5-ospf-1-area-0.0.0.2] [ar5-ospf-1-area-0.0.0.2]area 3 [ar5-ospf-1-area-0.0.0.3]net 5.5.5.0 0.0.0.255 [ar5-ospf-1-area-0.0.0.3] *************************************************************************************** <ar8>sys Enter system view, return user view with Ctrl+Z. [ar8]ospf [ar8-ospf-1]area 3 [ar8-ospf-1-area-0.0.0.3]net 5.5.5.0 0.0.0.255 [ar8-ospf-1-area-0.0.0.3] ************************************************************************************* [ar1]dis ospf ^ Error:Incomplete command found at '^' position. [ar1]dis ospf routing OSPF Process 1 with Router ID 1.1.1.1 Routing Tables Routing for Network Destination Cost Type NextHop AdvRouter Area 1.1.1.0/24 1 Transit 1.1.1.1 1.1.1.1 0.0.0.1 2.2.2.0/24 2 Inter-area 1.1.1.2 1.1.1.2 0.0.0.1 3.3.3.0/24 3 Inter-area 1.1.1.2 1.1.1.2 0.0.0.1 4.4.4.0/24 4 Inter-area 1.1.1.2 1.1.1.2 0.0.0.1 Total Nets: 4 Intra Area: 1 Inter Area: 3 ASE: 0 NSSA: 0 ************************************************************************************************************************************* [ar5-ospf-1]dis ospf pee [ar5-ospf-1]dis ospf peer OSPF Process 1 with Router ID 4.4.4.2 Neighbors Area 0.0.0.2 interface 4.4.4.2(GigabitEthernet0/0/0)'s neighbors Router ID: 4.4.4.1 Address: 4.4.4.1 State: Full Mode:Nbr is Slave Priority: 1 DR: 4.4.4.1 BDR: 4.4.4.2 MTU: 0 Dead timer due in 35 sec Retrans timer interval: 5 Neighbor is up for 00:05:28 Authentication Sequence: [ 0 ] Neighbors Area 0.0.0.3 interface 5.5.5.1(GigabitEthernet0/0/1)'s neighbors Router ID: 5.5.5.2 Address: 5.5.5.2 State: Full Mode:Nbr is Master Priority: 1 DR: 5.5.5.1 BDR: 5.5.5.2 MTU: 0 Dead timer due in 40 sec Retrans timer interval: 5 Neighbor is up for 00:03:03 Authentication Sequence: [ 0 ] <ar4>dis ospf p <ar4>dis ospf peer OSPF Process 1 with Router ID 4.4.4.1 Neighbors Area 0.0.0.0 interface 3.3.3.2(GigabitEthernet0/0/0)'s neighbors Router ID: 2.2.2.2 Address: 3.3.3.1 State: Full Mode:Nbr is Slave Priority: 1 DR: 3.3.3.1 BDR: 3.3.3.2 MTU: 0 Dead timer due in 40 sec Retrans timer interval: 5 Neighbor is up for 00:07:39 Authentication Sequence: [ 0 ] Neighbors Area 0.0.0.2 interface 4.4.4.1(GigabitEthernet0/0/1)'s neighbors Router ID: 4.4.4.2 Address: 4.4.4.2 State: Full Mode:Nbr is Master Priority: 1 DR: 4.4.4.1 BDR: 4.4.4.2 MTU: 0 Dead timer due in 27 sec Retrans timer interval: 5 Neighbor is up for 00:06:10 Authentication Sequence: [ 0 ] 建立虚连接 [ar4]ospf [ar4-ospf-1]area 2 [ar4-ospf-1-area-0.0.0.2]vl [ar4-ospf-1-area-0.0.0.2]vlink-peer 4.4.4.2 [ar4-ospf-1-area-0.0.0.2] [ar5-ospf-1]area 2 [ar5-ospf-1-area-0.0.0.2]vl [ar5-ospf-1-area-0.0.0.2]vlink-peer 3.3.3.2 [ar5-ospf-1-area-0.0.0.2]
查看ospf的数据库
