二进制安装tengine

简介: 二进制安装tengine

1.基础依赖包安装
install -y wget gcc pcre-devel perl libpcre3-dev zlib1g.dev
2.最新版本源代码的下载
mkdir -p /data/src
cd /data/src
wget https://ftp.openssl.org/source/openssl-1.1.1k.tar.gz
tar -xzf openssl-.tar.gz
wget https://tengine.taobao.org/download/tengine-2.3.3.tar.gz
tar -xzf tengine-
.tar.gz
cd /data/src/tengine-2.3.3
3.编译
./configure --prefix=/data/nginx --with-http_ssl_module --with-openssl=/data/src/openssl-1.1.1k --user=nginx --group=nginx --add-module=modules/ngx_http_upstream_session_sticky_module

安装
make && make install

添加相应用户

useradd nginx -M -s /sbin/nologin
chown -R nginx:nginx /data/nginx

配置端口绑定能力,否则绑定低于1024的端口号时会报权限错误

setcap cap_net_bind_service=+eip /data/nginx/sbin/nginx

编译配置信息,相关目录后面配置可能会用到

Configuration summary

  • using system PCRE library
  • using OpenSSL library: /data/src/openssl-1.1.1k
  • using system zlib library
  • jemalloc library is disabled

    nginx path prefix: "/data/nginx"
    nginx binary file: "/data/nginx/sbin/nginx"
    nginx modules path: "/data/nginx/modules"
    nginx configuration prefix: "/data/nginx/conf"
    nginx configuration file: "/data/nginx/conf/nginx.conf"
    nginx pid file: "/data/nginx/logs/nginx.pid"
    nginx error log file: "/data/nginx/logs/error.log"
    nginx http access log file: "/data/nginx/logs/access.log"
    nginx http client request body temporary files: "client_body_temp"
    nginx http proxy temporary files: "proxy_temp"
    nginx http fastcgi temporary files: "fastcgi_temp"
    nginx http uwsgi temporary files: "uwsgi_temp"
    nginx http scgi temporary files: "scgi_temp"

5.编写服务启动文件
vi /usr/lib/systemd/system/nginx.service
[Unit]
Description=The nginx HTTP and reverse proxy server
After=network.target

[Service]
Type=forking
User=nginx
Group=nginx
PIDFile=/data/nginx/logs/nginx.pid
ExecStartPre=/usr/bin/rm -f /data/nginx/logs/nginx.pid
ExecStartPre=/data/nginx/sbin/nginx -t
ExecStart=/data/nginx/sbin/nginx -c /data/nginx/conf/nginx.conf
ExecReload=/bin/kill -s HUP $MAINPID
KillSignal=SIGQUIT
TimeoutStopSec=5
KillMode=process
PrivateTmp=true

[Install]
WantedBy=multi-user.target

重启systemd守护进程

systemctl daemon-reload

启动tengine服务

systemctl start nginx
systemctl status nginx

systemctl enable nginx

6.编译参数说明

./configure --help

  --help                             print this message

  --prefix=PATH                      set installation prefix
  --sbin-path=PATH                   set nginx binary pathname
  --modules-path=PATH                set modules path
  --conf-path=PATH                   set nginx.conf pathname
  --error-log-path=PATH              set error log pathname
  --pid-path=PATH                    set nginx.pid pathname
  --lock-path=PATH                   set nginx.lock pathname

  --user=USER                        set non-privileged user for
                                     worker processes
  --group=GROUP                      set non-privileged group for
                                     worker processes

  --build=NAME                       set build name
  --builddir=DIR                     set build directory

  --with-select_module               enable select module
  --without-select_module            disable select module
  --with-poll_module                 enable poll module
  --without-poll_module              disable poll module

  --without-procs                    disable procs module

  --with-threads                     enable thread pool support

  --with-file-aio                    enable file AIO support

  --with-http_ssl_module             enable ngx_http_ssl_module
  --with-http_v2_module              enable ngx_http_v2_module
  --with-http_realip_module          enable ngx_http_realip_module
  --with-http_addition_module        enable ngx_http_addition_module
  --with-http_xslt_module            enable ngx_http_xslt_module
  --with-http_xslt_module=dynamic    enable dynamic ngx_http_xslt_module
  --with-http_image_filter_module    enable ngx_http_image_filter_module
  --with-http_image_filter_module=dynamic
                                     enable dynamic ngx_http_image_filter_module
  --with-http_geoip_module           enable ngx_http_geoip_module
  --with-http_geoip_module=dynamic   enable dynamic ngx_http_geoip_module
  --with-http_sub_module             enable ngx_http_sub_module
  --with-http_dav_module             enable ngx_http_dav_module
  --with-http_flv_module             enable ngx_http_flv_module
  --with-http_mp4_module             enable ngx_http_mp4_module
  --with-http_gunzip_module          enable ngx_http_gunzip_module
  --with-http_gzip_static_module     enable ngx_http_gzip_static_module
  --with-http_auth_request_module    enable ngx_http_auth_request_module
  --with-http_random_index_module    enable ngx_http_random_index_module
  --with-http_secure_link_module     enable ngx_http_secure_link_module
  --with-http_degradation_module     enable ngx_http_degradation_module
  --with-http_slice_module           enable ngx_http_slice_module
  --with-http_stub_status_module     enable ngx_http_stub_status_module

  --without-http_charset_module      disable ngx_http_charset_module
  --without-http_gzip_module         disable ngx_http_gzip_module
  --without-http_ssi_module          disable ngx_http_ssi_module
  --without-http_ssl_module          disable ngx_http_ssl_module
  --without-http_userid_module       disable ngx_http_userid_module
  --without-http_access_module       disable ngx_http_access_module
  --without-http_auth_basic_module   disable ngx_http_auth_basic_module
  --without-http_mirror_module       disable ngx_http_mirror_module
  --without-http_autoindex_module    disable ngx_http_autoindex_module
  --without-http_geo_module          disable ngx_http_geo_module
  --without-http_map_module          disable ngx_http_map_module
  --without-http_split_clients_module disable ngx_http_split_clients_module
  --without-http_referer_module      disable ngx_http_referer_module
  --without-http_rewrite_module      disable ngx_http_rewrite_module
  --without-http_proxy_module        disable ngx_http_proxy_module
  --without-http_fastcgi_module      disable ngx_http_fastcgi_module
  --without-http_uwsgi_module        disable ngx_http_uwsgi_module
  --without-http_scgi_module         disable ngx_http_scgi_module
  --without-http_grpc_module         disable ngx_http_grpc_module
  --without-http_memcached_module    disable ngx_http_memcached_module
  --without-http_limit_conn_module   disable ngx_http_limit_conn_module
  --without-http_limit_req_module    disable ngx_http_limit_req_module
  --without-http_empty_gif_module    disable ngx_http_empty_gif_module
  --without-http_browser_module      disable ngx_http_browser_module
  --without-http_stub_status_module  disable ngx_http_stub_status_module
  --without-http_upstream_hash_module
                                     disable ngx_http_upstream_hash_module
  --without-http_upstream_ip_hash_module
                                     disable ngx_http_upstream_ip_hash_module
  --without-http_upstream_least_conn_module
                                     disable ngx_http_upstream_least_conn_module
  --without-http_upstream_random_module
                                     disable ngx_http_upstream_random_module
  --without-http_upstream_keepalive_module
                                     disable ngx_http_upstream_keepalive_module
  --without-http_upstream_zone_module
                                     disable ngx_http_upstream_zone_module

  --with-http_perl_module            enable ngx_http_perl_module
  --with-http_perl_module=dynamic    enable dynamic ngx_http_perl_module
  --with-perl_modules_path=PATH      set Perl modules path
  --with-perl=PATH                   set perl binary pathname

  --without-http-upstream-rbtree     disable using rbtree for upstream lookup

  --with-http_lua_module             enable ngx_http_lua_module (will also enable --with-md5 and --with-sha1)
  --with-luajit-inc=PATH             set LuaJIT headers path (where lua.h/lauxlib.h/... are located)
  --with-luajit-lib=PATH             set LuaJIT library path (where libluajit-5.1.{
   a,so} are located)
  --with-lua-inc=PATH                set Lua headers path (where lua.h/lauxlib.h/... are located)
  --with-lua-lib=PATH                set Lua library path (where liblua.{
   a,so} are located, only support Lua-5.1.x)
  --http-log-path=PATH               set http access log pathname
  --http-client-body-temp-path=PATH  set path to store
                                     http client request body temporary files
  --http-proxy-temp-path=PATH        set path to store
                                     http proxy temporary files
  --http-fastcgi-temp-path=PATH      set path to store
                                     http fastcgi temporary files
  --http-uwsgi-temp-path=PATH        set path to store
                                     http uwsgi temporary files
  --http-scgi-temp-path=PATH         set path to store
                                     http scgi temporary files

  --without-http                     disable HTTP server
  --without-http-cache               disable HTTP cache

  --with-mail                        enable POP3/IMAP4/SMTP proxy module
  --with-mail=dynamic                enable dynamic POP3/IMAP4/SMTP proxy module
  --with-mail_ssl_module             enable ngx_mail_ssl_module
  --without-mail_pop3_module         disable ngx_mail_pop3_module
  --without-mail_imap_module         disable ngx_mail_imap_module
  --without-mail_smtp_module         disable ngx_mail_smtp_module

  --with-stream                      enable TCP/UDP proxy module
  --with-stream=dynamic              enable dynamic TCP/UDP proxy module
  --with-stream_ssl_module           enable ngx_stream_ssl_module
  --with-stream_realip_module        enable ngx_stream_realip_module
  --with-stream_geoip_module         enable ngx_stream_geoip_module
  --with-stream_geoip_module=dynamic enable dynamic ngx_stream_geoip_module
  --with-stream_ssl_preread_module   enable ngx_stream_ssl_preread_module
  --with-stream_sni                  enable dynamic server block
  --without-stream_limit_conn_module disable ngx_stream_limit_conn_module
  --without-stream_access_module     disable ngx_stream_access_module
  --without-stream_geo_module        disable ngx_stream_geo_module
  --without-stream_map_module        disable ngx_stream_map_module
  --without-stream_split_clients_module
                                     disable ngx_stream_split_clients_module
  --without-stream_return_module     disable ngx_stream_return_module
  --without-stream_upstream_hash_module
                                     disable ngx_stream_upstream_hash_module
  --without-stream_upstream_least_conn_module
                                     disable ngx_stream_upstream_least_conn_module
  --without-stream_upstream_random_module
                                     disable ngx_stream_upstream_random_module
  --without-stream_upstream_zone_module
                                     disable ngx_stream_upstream_zone_module

  --with-google_perftools_module     enable ngx_google_perftools_module
  --with-cpp_test_module             enable ngx_cpp_test_module

  --add-module=PATH                  enable external module
  --add-dynamic-module=PATH          enable dynamic external module

  --with-compat                      dynamic modules compatibility

  --with-cc=PATH                     set C compiler pathname
  --with-cpp=PATH                    set C preprocessor pathname
  --with-cc-opt=OPTIONS              set additional C compiler options
  --with-ld-opt=OPTIONS              set additional linker options
  --with-cpu-opt=CPU                 build for the specified CPU, valid values:
                                     pentium, pentiumpro, pentium3, pentium4,
                                     athlon, opteron, sparc32, sparc64, ppc64

  --without-pcre                     disable PCRE library usage
  --with-pcre                        force PCRE library usage
  --with-pcre=DIR                    set path to PCRE library sources
  --with-pcre-opt=OPTIONS            set additional build options for PCRE
  --with-pcre-jit                    build PCRE with JIT compilation support

  --with-zlib=DIR                    set path to zlib library sources
  --with-zlib-opt=OPTIONS            set additional build options for zlib
  --with-zlib-asm=CPU                use zlib assembler sources optimized
                                     for the specified CPU, valid values:
                                     pentium, pentiumpro

  --with-libatomic                   force libatomic_ops library usage
  --with-libatomic=DIR               set path to libatomic_ops library sources

  --with-jemalloc                    force jemalloc library usage
  --with-jemalloc=DIR                set path to jemalloc library files

  --with-openssl=DIR                 set path to OpenSSL library sources
  --with-openssl-opt=OPTIONS         set additional build options for OpenSSL

  --with-debug                       enable debug logging
相关文章
|
tengine 关系型数据库 MySQL
Tengine 详细安装与配置
Tengine和nginx差不多,方便实用
|
应用服务中间件 nginx tengine
|
tengine 应用服务中间件 Linux
|
tengine Shell 应用服务中间件
|
应用服务中间件 nginx tengine
|
tengine 应用服务中间件 nginx
|
tengine Linux
Tengine安装./configure: error: C compiler cc is not found
CentOS 6.5 下 安装 Tengine 执行配置命令./configure  时提示以下错误:checking for OS + Linux 2.6.32-431.el6.x86_64 x86_64checking for C compiler .
2063 0
|
tengine 应用服务中间件 Linux
CentOS 6.5 下 Tengine 安装记录
Tengine是由淘宝网发起的Web服务器项目。它在Nginx的基础上,针对大访问量网站的需求,添加了很多高级功能和特性。Tengine的性能和稳定性已经在大型的网站如淘宝网,天猫商城等得到了很好的检验。
901 0
|
tengine 应用服务中间件 nginx
Tengine简单安装
跟NGINX一样,没有深入研究配置,因为暂时用不到。。:) 下载2.10,基于NGINX1.6.2的。 我的配置参数如下: ./configure --with-openssl=/root/tengine_pkg/openssl-1.
985 0