看了上一篇文章后，相信你们对按键有个基本的了解，在这个驱动之前写的驱动跟51是没有什么区别的，上篇文章中的读按键是一直在进行，特别是对CPU的消耗会非常大，我们一般不采用这种方法，这章我们采用中断实现按键操作。当有按键产生了我们才去读，没有按键产生就休眠。还是直接上代码。
上一篇文章的链接：http://blog.csdn.net/qq_21792169/article/details/48414765
驱动程序：
#include <linux/module.h> /*模块有关的*/
#include <linux/kernel.h>/*内核有关的*/
#include <linux/fs.h>/*文件系统有关的*/
#include <linux/init.h>
#include <linux/device.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/interrupt.h>/*linux中断*/
#include <linux/poll.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h> //copy_to_user
#include <mach/regs-gpio.h>/*寄存器设置*/S3C2410_GPF0等的定义
#include <mach/hardware.h>//s3c2410_gpio_getpin等的定义
#include <mach/irqs.h> //IRQ_EINT0等的定义
#include <asm/system.h>
volatile unsigned long *GPFCON=NULL;
volatile unsigned long *GPFDAT=NULL;
static DECLARE_WAIT_QUEUE_HEAD(button_waitq);
/* 中断事件标志, 中断服务程序将它置1，third_drv_read将它清0 */
static volatile int ev_press = 0;
#define DEVICE_NAME "buttons"
static struct class *buttons_class;
struct pin_desc{
unsigned int pin;
unsigned int key_val;
};
static unsigned char keyval;//jianzhi
/* 键值: 按下时, 0x01, 0x02, 0x03, 0x04 */
/* 键值: 松开时, 0x81, 0x82, 0x83, 0x84 */
struct pin_desc pins_desc[4] = {
{S3C2410_GPF0, 0x01},
{S3C2410_GPF2, 0x02},
{S3C2410_GPF3, 0x03},
{S3C2410_GPF4, 0x04},
};
static irqreturn_t buttons_irq(int irq, void *dev_id)
{
//static int cnt=0;
//printk(KERN_INFO "%d this is test\n",cnt++);//优先级尽量用上
struct pin_desc *pindesc = (struct pin_desc *)dev_id;
unsigned int pinval;
pinval = s3c2410_gpio_getpin(pindesc->pin);
if (pinval)
{
/* 松开 */
keyval = 0x80 | pindesc->key_val;
}
else
{
/* 按下 */
keyval = pindesc->key_val;
}
ev_press = 1; /* 表示中断发生了 */
wake_up_interruptible(&button_waitq); /* 唤醒休眠的进程 */
return IRQ_HANDLED;
}
static int third_drv_open(struct inode *inode, struct file *file)
{
request_irq(IRQ_EINT0, buttons_irq, IRQF_TRIGGER_FALLING|IRQF_TRIGGER_RISING, "S2", &pins_desc[0]);
request_irq(IRQ_EINT2, buttons_irq, IRQF_TRIGGER_FALLING|IRQF_TRIGGER_RISING, "S3", &pins_desc[1]);
request_irq(IRQ_EINT3, buttons_irq, IRQF_TRIGGER_FALLING|IRQF_TRIGGER_RISING, "S4", &pins_desc[2]);
request_irq(IRQ_EINT4, buttons_irq, IRQF_TRIGGER_FALLING|IRQF_TRIGGER_RISING, "S5", &pins_desc[3]);
return 0;
}
ssize_t third_drv_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
{
if(size!=1)
return EINVAL;
/* 如果没有按键动作, 休眠 */
wait_event_interruptible(button_waitq, ev_press);
/* 如果有按键动作, 返回键值 */
copy_to_user(buf, &keyval, 1);
ev_press = 0;//继续休眠
return 0;
}
int third_drv_close(struct inode *inode, struct file *file)
{
free_irq(IRQ_EINT0, &pins_desc[0]);
free_irq(IRQ_EINT2, &pins_desc[1]);
free_irq(IRQ_EINT3, &pins_desc[2]);
free_irq(IRQ_EINT4, &pins_desc[3]);
return 0;
}
static struct file_operations three_drv_fops = {
.owner = THIS_MODULE, /* 这是一个宏，推向编译模块时自动创建的__this_module变量 */
.open = third_drv_open,
.read =third_drv_read,
.release = third_drv_close,
};
int major;
static int third_drv_init(void)
{
major = register_chrdev(0, DEVICE_NAME, &three_drv_fops);
buttons_class= class_create(THIS_MODULE, DEVICE_NAME);
device_create(buttons_class, NULL, MKDEV(major, 0), NULL, "buttons");
GPFCON = (volatile unsigned long *)ioremap(0x56000050, 16);
GPFDAT= GPFCON + 1;
return 0;
}
static void third_drv_exit(void)
{
unregister_chrdev(major, "third_drv");
device_destroy(buttons_class,MKDEV(major, 0));
class_destroy(buttons_class);
iounmap(GPFCON);
}
module_init(third_drv_init);
module_exit(third_drv_exit);
MODULE_LICENSE("GPL");
测试程序：
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
/* thirddrvtest
*/
int main(int argc, char **argv)
{
int fd;
unsigned char key_val=100;
fd = open("/dev/buttons", O_RDWR);
if (fd < 0)
{
printf("can't open!\n");
}
while (1)
{
read(fd, &key_val, 1);
printf("key_val = 0x%x\n", key_val);
//sleep(5);
}
return 0;
}
Makefile:
Makefile其他的部分是不变的，只需要修改文件名字就可以了。
obj-m :=buttons.o
KERNELDIR ?= /home/work/Linux/linux-2.6.28.7
PWD := $(shell pwd)
default:
$(MAKE) -C $(KERNELDIR) M=$(PWD) modules
clean:
rm -f *o *.mod.o *mod.c *.symvers *.order
