失望_个人页

回1楼梦丫头的帖子 apache  弄了一天了  没弄明白，各种问题....................才想换 不知道那个好！ ------------------------- 回3楼梦丫头的帖子 配置好后，访问很慢，很慢，导致打不开，不知道什么问题， 以下是配置文件 # # This is the main Apache HTTP server configuration file.  It contains the # configuration directives that give the server its instructions. # See for detailed information. # In particular, see # # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do.  They're here only as hints or reminders.  If you are unsure # consult the online docs. You have been warned.   # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with '/' (or 'drive:/' for Win32), the # server will use that explicit path.  If the filenames do *not* begin # with '/', the value of ServerRoot is prepended -- so 'logs/access_log' # with ServerRoot set to '/usr/local/apache2' will be interpreted by the # server as '/usr/local/apache2/logs/access_log', whereas '/logs/access_log' # will be interpreted as '/logs/access_log'. # # NOTE: Where filenames are specified, you must use forward slashes # instead of backslashes (e.g., 'c:/apache' instead of 'c:\apache'). # If a drive letter is omitted, the drive on which httpd.exe is located # will be used by default.  It is recommended that you always supply # an explicit drive letter in absolute paths to avoid confusion. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path.  If you point # ServerRoot at a non-local disk, be sure to specify a local disk on the # Mutex directive, if file-based mutexes are used.  If you wish to share the # same ServerRoot for multiple httpd daemons, you will need to change at # least PidFile. # Define SRVROOT '/Apache24' ServerRoot 'D:/HJ/Apache24' # # Mutex: Allows you to set the mutex mechanism and mutex file directory # for individual mutexes, or change the global defaults # # Uncomment and change the directory if mutexes are file-based and the default # mutex file directory is not on a local disk or is not appropriate for some # other reason. # # Mutex default:logs # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # #LoadModule access_compat_module modules/mod_access_compat.so LoadModule actions_module modules/mod_actions.so LoadModule alias_module modules/mod_alias.so LoadModule allowmethods_module modules/mod_allowmethods.so LoadModule asis_module modules/mod_asis.so LoadModule auth_basic_module modules/mod_auth_basic.so #LoadModule auth_digest_module modules/mod_auth_digest.so #LoadModule auth_form_module modules/mod_auth_form.so #LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_core_module modules/mod_authn_core.so #LoadModule authn_dbd_module modules/mod_authn_dbd.so #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_file_module modules/mod_authn_file.so #LoadModule authn_socache_module modules/mod_authn_socache.so #LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule authz_core_module modules/mod_authz_core.so #LoadModule authz_dbd_module modules/mod_authz_dbd.so #LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_host_module modules/mod_authz_host.so #LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule autoindex_module modules/mod_autoindex.so #LoadModule buffer_module modules/mod_buffer.so #LoadModule cache_module modules/mod_cache.so #LoadModule cache_disk_module modules/mod_cache_disk.so #LoadModule cache_socache_module modules/mod_cache_socache.so #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule cgi_module modules/mod_cgi.so #LoadModule charset_lite_module modules/mod_charset_lite.so #LoadModule data_module modules/mod_data.so #LoadModule dav_module modules/mod_dav.so #LoadModule dav_fs_module modules/mod_dav_fs.so #LoadModule dav_lock_module modules/mod_dav_lock.so #LoadModule dbd_module modules/mod_dbd.so #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so #LoadModule dumpio_module modules/mod_dumpio.so LoadModule env_module modules/mod_env.so #LoadModule expires_module modules/mod_expires.so #LoadModule ext_filter_module modules/mod_ext_filter.so #LoadModule file_cache_module modules/mod_file_cache.so #LoadModule filter_module modules/mod_filter.so #LoadModule headers_module modules/mod_headers.so #LoadModule heartbeat_module modules/mod_heartbeat.so #LoadModule heartmonitor_module modules/mod_heartmonitor.so #LoadModule ident_module modules/mod_ident.so #LoadModule imagemap_module modules/mod_imagemap.so LoadModule include_module modules/mod_include.so LoadModule info_module modules/mod_info.so LoadModule isapi_module modules/mod_isapi.so #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so #LoadModule ldap_module modules/mod_ldap.so #LoadModule logio_module modules/mod_logio.so LoadModule log_config_module modules/mod_log_config.so #LoadModule log_debug_module modules/mod_log_debug.so #LoadModule log_forensic_module modules/mod_log_forensic.so #LoadModule lua_module modules/mod_lua.so #LoadModule macro_module modules/mod_macro.so LoadModule mime_module modules/mod_mime.so #LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule negotiation_module modules/mod_negotiation.so #LoadModule proxy_module modules/mod_proxy.so #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_express_module modules/mod_proxy_express.so #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule proxy_html_module modules/mod_proxy_html.so #LoadModule proxy_http_module modules/mod_proxy_http.so #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so #LoadModule ratelimit_module modules/mod_ratelimit.so #LoadModule reflector_module modules/mod_reflector.so #LoadModule remoteip_module modules/mod_remoteip.so #LoadModule request_module modules/mod_request.so #LoadModule reqtimeout_module modules/mod_reqtimeout.so #LoadModule rewrite_module modules/mod_rewrite.so #LoadModule sed_module modules/mod_sed.so #LoadModule session_module modules/mod_session.so #LoadModule session_cookie_module modules/mod_session_cookie.so #LoadModule session_crypto_module modules/mod_session_crypto.so #LoadModule session_dbd_module modules/mod_session_dbd.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so #LoadModule socache_dbm_module modules/mod_socache_dbm.so #LoadModule socache_memcache_module modules/mod_socache_memcache.so LoadModule socache_shmcb_module modules/mod_socache_shmcb.so #LoadModule speling_module modules/mod_speling.so LoadModule ssl_module modules/mod_ssl.so LoadModule status_module modules/mod_status.so #LoadModule substitute_module modules/mod_substitute.so #LoadModule unique_id_module modules/mod_unique_id.so #LoadModule userdir_module modules/mod_userdir.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule version_module modules/mod_version.so LoadModule vhost_alias_module modules/mod_vhost_alias.so #LoadModule watchdog_module modules/mod_watchdog.so #LoadModule xml2enc_module modules/mod_xml2enc.so # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch.   # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # definition.  These values also provide defaults for # any containers you may define later in the file. # # All of these directives may appear inside containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed.  This address appears on some server-generated pages, such # as error documents.  e.g. admin@your-domain.com # ServerAdmin admin@example.com # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServerName localhost:80 # # Deny access to the entirety of your server's filesystem. You must # explicitly permit access to web content directories in other # blocks below. #     AllowOverride none     Require all denied # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot 'd:/wed'     #     # Possible values for the Options directive are 'None', 'All',     # or any combination of:     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews     #     # Note that 'MultiViews' must be named *explicitly* --- 'Options All'     # doesn't give it to you.     #     # The Options directive is both complicated and important.  Please see     # http://httpd.apache.org/docs/2.4/mod/core.html#options     # for more information.     #     Options Indexes FollowSymLinks     #     # AllowOverride controls what directives may be placed in .htaccess files.     # It can be 'All', 'None', or any combination of the keywords:     #   Options FileInfo AuthConfig Limit     #     AllowOverride FileInfo     #     # Controls who can get stuff from this server.     #     Require all granted # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. #     DirectoryIndex index.php index.htm index.html # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. #     Require all denied # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be # logged here.  If you *do* define an error logfile for a # container, that host's errors will be logged there and not here. # ErrorLog 'logs/error.log' # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn     #     # The following directives define some format nicknames for use with     # a CustomLog directive (see below).     #     LogFormat '%h %l %u %t \'%r\' %>s %b \'%{Referer}i\' \'%{User-Agent}i\'' combined     LogFormat '%h %l %u %t \'%r\' %>s %b' common            # You need to enable mod_logio.c to use %I and %O       LogFormat '%h %l %u %t \'%r\' %>s %b \'%{Referer}i\' \'%{User-Agent}i\' %I %O' combinedio          #     # The location and format of the access logfile (Common Logfile Format).     # If you do not define any access logfiles within a     # container, they will be logged here.  Contrariwise, if you *do*     # define per- access logfiles, transactions will be     # logged therein and *not* in this file.     #     CustomLog 'logs/access.log' common     #     # If you prefer a logfile with access, agent, and referer information     # (Combined Logfile Format) you can use the following directive.     #     #CustomLog 'logs/access.log' combined     #     # Redirect: Allows you to tell clients about documents that used to     # exist in your server's namespace, but do not anymore. The client     # will make a new request for the document at its new location.     # Example:     # Redirect permanent /foo http://www.example.com/bar     #     # Alias: Maps web paths into filesystem paths and is used to     # access content that does not live under the DocumentRoot.     # Example:     # Alias /webpath /full/filesystem/path     #     # If you include a trailing / on /webpath then the server will     # require it to be present in the URL.  You will also likely     # need to provide a section to allow access to     # the filesystem path.     #     # ScriptAlias: This controls which directories contain server scripts.     # ScriptAliases are essentially the same as Aliases, except that     # documents in the target directory are treated as applications and     # run by the server when requested rather than as documents sent to the     # client.  The same rules about trailing '/' apply to ScriptAlias     # directives as to Alias.     #     ScriptAlias /cgi-bin/ 'd:/Apache24/cgi-bin/'     #     # ScriptSock: On threaded servers, designate the path to the UNIX     # socket used to communicate with the CGI daemon of mod_cgid.     #     #Scriptsock logs/cgisock # # '${SRVROOT}/cgi-bin' should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. #     AllowOverride None     Options None     Require all granted     #     # TypesConfig points to the file containing the list of mappings from     # filename extension to MIME-type.     #     TypesConfig conf/mime.types     #     # AddType allows you to add to or override the MIME configuration     # file specified in TypesConfig for specific file types.     #     #AddType application/x-gzip .tgz     #     # AddEncoding allows you to have certain browsers uncompress     # information on the fly. Note: Not all browsers support this.     #     #AddEncoding x-compress .Z     #AddEncoding x-gzip .gz .tgz     #     # If the AddEncoding directives above are commented-out, then you     # probably should define those extensions to indicate media types:     #     AddType application/x-compress .Z     AddType application/x-gzip .gz .tgz     #     # AddHandler allows you to map certain file extensions to 'handlers':     # actions unrelated to filetype. These can be either built into the server     # or added with the Action directive (see below)     #     # To use CGI scripts outside of ScriptAliased directories:     # (You will also need to add 'ExecCGI' to the 'Options' directive.)     #     #AddHandler cgi-script .cgi .pl     # For type maps (negotiated resources):     #AddHandler type-map var     #     # Filters allow you to process content before it is sent to the client.     #     # To parse .shtml files for server-side includes (SSI):     # (You will also need to add 'Includes' to the 'Options' directive.)     #     #AddType text/html .shtml     #AddOutputFilter INCLUDES .shtml # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type.  The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 'The server made a boo boo.' #ErrorDocument 404 /missing.html #ErrorDocument 404 '/cgi-bin/missing_handler.pl' #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or one of the special # values 'default', 'none' or 'unlimited'. # Default setting is to accept 200 Ranges. #MaxRanges unlimited # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver # files.  This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # Defaults: EnableMMAP On, EnableSendfile Off # #EnableMMAP off #EnableSendfile on #AcceptFilter http none #AcceptFilter https none # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration Include conf/extra/httpd-info.conf # Virtual hosts Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Configure mod_proxy_html to understand HTML4/XHTML1 Include conf/extra/httpd-proxy-html.conf # Secure (SSL/TLS) connections # Note: The following must must be present to support #       starting without SSL on platforms with no /dev/random equivalent #       but a statically compiled-in mod_ssl. # #Include conf/extra/httpd-ssl.conf Include conf/extra/httpd-ahssl.conf SSLRandomSeed startup builtin SSLRandomSeed connect builtin LoadModule php5_module 'd:/HJ/php/php5apache2_4.dll' AddHandler application/x-httpd-php .php PHPIniDir 'd:/HJ/php' ------------------------- 回5楼梦丫头的帖子 这个是apache的配置文件 httpd.conf

回2楼ivmmff的帖子 2，不考虑，项目大，vpn怕出问题 1的问题，B服务器的上123.txt文件是A服务器上的程序直接写的，能直接写吗？ ------------------------- 回1楼zuijh的帖子 不是自动生成的，是A服务器的程序写入到B服务器下的  txt里面的内容肯定不同的 ------------------------- 回4楼ivmmff的帖子 是A服务器的程序写入到B服务器下的  txt里面的内容不同的，是A服务器根据用户ID还写的，    问题是不知道怎么A服务器怎么写入到B服务器

ReECS配置选择？ 占位编辑....

回1楼牛b王的帖子 那服务器的上21端口我是否要关闭呢？？？

回1楼孤城的帖子 之前是好的，换了网络就出现问题了     刚才试了我用手机分的热点给电脑，FTP连接可以连接，插上电信的网络，FTP无法连接！打10000客服说，我们只保证网络问题，不负责某个软件是否可以连接网络！ ------------------------- Re办公室升级到光纤后，FTP就连接不上，求助 重连也没用啊，FTP难道不能使用光纤网络？？？？我用手机分的热点给电脑，FTP连接可以连接，插上电信的网络，FTP无法连接！打10000客服说，我们只保证网络问题，不负责某个软件是否可以连接网络！

Re服务器日志这样是不是有问题啊？ 是的，iis6.0的 ------------------------- 回1楼dongshan8的帖子 是的，iis6.0的。

Re网页GZIP压缩设置问题，求助！ 按着这个来的http://www.weizhushou.net/815.html ------------------------- 回2楼梦丫头的帖子 点了不受限制，结果还是一样的，开启不了gizp压缩，按着教程走的，到这一步就是不行，越过了，也没开启成功 ------------------------- 麻烦3楼的版主牛B王改一下ID，带B字，我回复不了 看教程，也不行，都用了一键开启的工具，还是不行 麻烦3楼的版主牛B王改一下ID，带B字，我回复不了