localhost和127.0.0.1都无法正常访问
Relocalhost和127.0.0.1都无法正常访问
引用第2楼dongshan8于2016-04-19 10:05发表的 :
楼主您好,
能贴出您的 apache 配置文件内容吗?
您是如何布置的 apache + php + mysql 的呢?是手工安装,还是用自动安装脚本来安装的?
....... [url=https://bbs.aliyun.com/job.php?action=topost&tid=277757&pid=779671][/url]
版主来了, 太感动了, 多谢!!!
httpd.conf
## This is the main Apache HTTP server configuration file. It contains the# configuration directives that give the server its instructions.# See for detailed information.# In particular, see # # for a discussion of each configuration directive.## Do NOT simply read the instructions in here without understanding# what they do. They're here only as hints or reminders. If you are unsure# consult the online docs. You have been warned. ## Configuration and logfile names: If the filenames you specify for many# of the server's control files begin with '/' (or 'drive:/' for Win32), the# server will use that explicit path. If the filenames do *not* begin# with '/', the value of ServerRoot is prepended -- so 'logs/foo.log'# with ServerRoot set to 'D:/WAMP/apache' will be interpreted by the# server as 'D:/WAMP/apache/logs/foo.log'.## NOTE: Where filenames are specified, you must use forward slashes# instead of backslashes (e.g., 'c:/apache' instead of 'c:\apache').# If a drive letter is omitted, the drive on which httpd.exe is located# will be used by default. It is recommended that you always supply# an explicit drive letter in absolute paths to avoid confusion.## ServerRoot: The top of the directory tree under which the server's# configuration, error, and log files are kept.## Do not add a slash at the end of the directory path. If you point# ServerRoot at a non-local disk, be sure to point the LockFile directive# at a local disk. If you wish to share the same ServerRoot for multiple# httpd daemons, you will need to change at least LockFile and PidFile.#ServerRoot 'D:/WAMP/apache'## Listen: Allows you to bind Apache to specific IP addresses and/or# ports, instead of the default. See also the # directive.## Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses.##Listen 12.34.56.78:80Listen 80## Dynamic Shared Object (DSO) Support## To be able to use the functionality of a module which was built as a DSO you# have to place corresponding `LoadModule' lines at this location so the# directives contained in it are actually available _before_ they are used.# Statically compiled modules (those listed by `httpd -l') do not need# to be loaded here.## Example:# LoadModule foo_module modules/mod_foo.so#LoadModule actions_module modules/mod_actions.soLoadModule alias_module modules/mod_alias.soLoadModule asis_module modules/mod_asis.soLoadModule auth_basic_module modules/mod_auth_basic.so#LoadModule auth_digest_module modules/mod_auth_digest.so#LoadModule authn_alias_module modules/mod_authn_alias.so#LoadModule authn_anon_module modules/mod_authn_anon.so#LoadModule authn_dbd_module modules/mod_authn_dbd.so#LoadModule authn_dbm_module modules/mod_authn_dbm.soLoadModule authn_default_module modules/mod_authn_default.soLoadModule authn_file_module modules/mod_authn_file.so#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so#LoadModule authz_dbm_module modules/mod_authz_dbm.soLoadModule authz_default_module modules/mod_authz_default.soLoadModule authz_groupfile_module modules/mod_authz_groupfile.soLoadModule authz_host_module modules/mod_authz_host.so#LoadModule authz_owner_module modules/mod_authz_owner.soLoadModule authz_user_module modules/mod_authz_user.soLoadModule autoindex_module modules/mod_autoindex.so#LoadModule cache_module modules/mod_cache.so#LoadModule cern_meta_module modules/mod_cern_meta.soLoadModule cgi_module modules/mod_cgi.so#LoadModule charset_lite_module modules/mod_charset_lite.so#LoadModule dav_module modules/mod_dav.so#LoadModule dav_fs_module modules/mod_dav_fs.so#LoadModule dav_lock_module modules/mod_dav_lock.so#LoadModule dbd_module modules/mod_dbd.soLoadModule deflate_module modules/mod_deflate.soLoadModule dir_module modules/mod_dir.so#LoadModule disk_cache_module modules/mod_disk_cache.so#LoadModule dumpio_module modules/mod_dumpio.soLoadModule env_module modules/mod_env.soLoadModule expires_module modules/mod_expires.so#LoadModule ext_filter_module modules/mod_ext_filter.so#LoadModule file_cache_module modules/mod_file_cache.soLoadModule filter_module modules/mod_filter.soLoadModule headers_module modules/mod_headers.so#LoadModule ident_module modules/mod_ident.so#LoadModule imagemap_module modules/mod_imagemap.soLoadModule include_module modules/mod_include.so#LoadModule info_module modules/mod_info.soLoadModule isapi_module modules/mod_isapi.so#LoadModule ldap_module modules/mod_ldap.so#LoadModule logio_module modules/mod_logio.soLoadModule log_config_module modules/mod_log_config.so#LoadModule log_forensic_module modules/mod_log_forensic.so#LoadModule mem_cache_module modules/mod_mem_cache.soLoadModule mime_module modules/mod_mime.so#LoadModule mime_magic_module modules/mod_mime_magic.soLoadModule negotiation_module modules/mod_negotiation.so#LoadModule proxy_module modules/mod_proxy.so#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so#LoadModule proxy_connect_module modules/mod_proxy_connect.so#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so#LoadModule proxy_http_module modules/mod_proxy_http.so#LoadModule proxy_scgi_module modules/mod_proxy_scgi.so#LoadModule reqtimeout_module modules/mod_reqtimeout.soLoadModule rewrite_module modules/mod_rewrite.soLoadModule setenvif_module modules/mod_setenvif.so#LoadModule speling_module modules/mod_speling.soLoadModule ssl_module modules/mod_ssl.so#LoadModule status_module modules/mod_status.so#LoadModule substitute_module modules/mod_substitute.so#LoadModule unique_id_module modules/mod_unique_id.so#LoadModule userdir_module modules/mod_userdir.so#LoadModule usertrack_module modules/mod_usertrack.so#LoadModule version_module modules/mod_version.so#LoadModule vhost_alias_module modules/mod_vhost_alias.so## If you wish httpd to run as a different user or group, you must run# httpd as root initially and it will switch. ## User/Group: The name (or #number) of the user/group to run httpd as.# It is usually good practice to create a dedicated user and group for# running httpd, as with most system services.#User daemonGroup daemon# 'Main' server configuration## The directives in this section set up the values used by the 'main'# server, which responds to any requests that aren't handled by a# definition. These values also provide defaults for# any containers you may define later in the file.## All of these directives may appear inside containers,# in which case these default settings will be overridden for the# virtual host being defined.### ServerAdmin: Your address, where problems with the server should be# e-mailed. This address appears on some server-generated pages, such# as error documents. e.g. admin@your-domain.com#ServerAdmin scp1688@163.com## ServerName gives the name and port that the server uses to identify itself.# This can often be determined automatically, but we recommend you specify# it explicitly to prevent problems during startup.## If your host doesn't have a registered DNS name, enter its IP address here.#ServerName www.phpStudy.net:80## DocumentRoot: The directory out of which you will serve your# documents. By default, all requests are taken from this directory, but# symbolic links and aliases may be used to point to other locations.#DocumentRoot 'D:\WAMP\WWW'## Each directory to which Apache has access can be configured with respect# to which services and features are allowed and/or disabled in that# directory (and its subdirectories). ## First, we configure the 'default' to be a very restrictive set of # features. # Options FollowSymLinks AllowOverride All Order deny,allow Allow from all## Note that from this point forward you must specifically allow# particular features to be enabled - so if something's not working as# you might expect, make sure that you have specifically enabled it# below.### This should be changed to whatever you set DocumentRoot to.# # # Possible values for the Options directive are 'None', 'All', # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that 'MultiViews' must be named *explicitly* --- 'Options All' # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be 'All', 'None', or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride All # # Controls who can get stuff from this server. # Order allow,deny Allow from all## DirectoryIndex: sets the file that Apache will serve if a directory# is requested.# DirectoryIndex index.html index.php index.htm## The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # Order allow,deny Deny from all Satisfy All## ErrorLog: The location of the error log file.# If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be# logged here. If you *do* define an error logfile for a # container, that host's errors will be logged there and not here.#ErrorLog 'logs/error.log'## LogLevel: Control the number of messages logged to the error_log.# Possible values include: debug, info, notice, warn, error, crit,# alert, emerg.#LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat '%h %l %u %t \'%r\' %>s %b \'%{Referer}i\' \'%{User-Agent}i\'' combined LogFormat '%h %l %u %t \'%r\' %>s %b' common # You need to enable mod_logio.c to use %I and %O LogFormat '%h %l %u %t \'%r\' %>s %b \'%{Referer}i\' \'%{User-Agent}i\' %I %O' combinedio # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a # container, they will be logged here. Contrariwise, if you *do* # define per- access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog 'logs/access.log' common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog 'logs/access.log' combined # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.phpStudy.net/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing '/' apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ 'D:/WAMP/apache/cgi-bin/' # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock## 'D:/WAMP/apache/cgi-bin' should be changed to whatever your ScriptAliased# CGI directory exists, if you have that configured.# AllowOverride All Options None Order allow,deny Allow from all## DefaultType: the default MIME type the server will use for a document# if it cannot otherwise determine one, such as from filename extensions.# If your server contains mostly text or HTML documents, 'text/plain' is# a good value. If most of your content is binary, such as applications# or images, you may want to use 'application/octet-stream' instead to# keep browsers from trying to display binary files as though they are# text.#DefaultType text/plain # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to 'handlers': # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add 'ExecCGI' to the 'Options' directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add 'Includes' to the 'Options' directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml## The mod_mime_magic module allows the server to use various hints from the# contents of the file itself to determine its type. The MIMEMagicFile# directive tells the module where the hint definitions are located.##MIMEMagicFile conf/magic## Customizable error responses come in three flavors:# 1) plain text 2) local redirects 3) external redirects## Some examples:#ErrorDocument 500 'The server made a boo boo.'#ErrorDocument 404 /missing.html#ErrorDocument 404 '/cgi-bin/missing_handler.pl'#ErrorDocument 402 http://www.phpStudy.net/subscription_info.html### MaxRanges: Maximum number of Ranges in a request before# returning the entire resource, or 0 for unlimited# Default setting is to accept 200 Ranges#MaxRanges 0## EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver# files. This usually improves server performance, but must# be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise# broken on your system.##EnableMMAP off#EnableSendfile off# Supplemental configuration## The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary.# Server-pool management (MPM specific)Include conf/extra/httpd-mpm.conf# Multi-language error messages#Include conf/extra/httpd-multilang-errordoc.conf# Fancy directory listings#Include conf/extra/httpd-autoindex.conf# Language settings#Include conf/extra/httpd-languages.conf# User home directories#Include conf/extra/httpd-userdir.conf# Real-time info on requests and configuration#Include conf/extra/httpd-info.conf# Virtual hostsInclude conf/extra/httpd-vhosts.conf# Local access to the Apache HTTP Server Manual#Include conf/extra/httpd-manual.conf# Distributed authoring and versioning (WebDAV)#Include conf/extra/httpd-dav.conf# Various default settings#Include conf/extra/httpd-default.confInclude conf/phpmyadmin.confInclude conf/vhosts.conf# Secure (SSL/TLS) connections#Include conf/extra/httpd-ssl.conf## Note: The following must must be present to support# starting without SSL on platforms with no /dev/random equivalent# but a statically compiled-in mod_ssl.#LoadFile 'D:/WAMP/PHP/php5ts.dll'LoadModule php5_module 'D:/WAMP/PHP/php5apache2_2.dll' PHPIniDir 'D:/WAMP/PHP/' AddType application/x-httpd-php .php .phtmlLoadFile 'D:/WAMP/PHP/libmysql.dll'LoadFile 'D:/WAMP/PHP/libmcrypt.dll'SSLRandomSeed startup builtinSSLRandomSeed connect builtinRewriteEngine OnRewriteRule ^(.*)/archiver/((fid|tid)-[\w\-]+\.html)$ $1/archiver/index.php?$2RewriteRule ^(.*)/forum-([0-9]+)-([0-9]+)\.html$ $1/forumdisplay.php?fid=$2&page=$3RewriteRule ^(.*)/thread-([0-9]+)-([0-9]+)-([0-9]+)\.html$ $1/viewthread.php?tid=$2&extra=page\%3D$4&page=$3RewriteRule ^(.*)/space-(username|uid)-(.+)\.html$ $1/space.php?$2=$3RewriteRule ^(.*)/tag-(.+)\.html$ $1/tag.php?name=$2AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css text/javascript application/x-javascript application/javascriptTraceEnable offSetOutputFilter DEFLATE# Don’t compress images and otherSetEnvIfNoCase Request_URI .(?:gif|jpe?g|png)$ no-gzip dont-varySetEnvIfNoCase Request_URI .(?:exe|t?gz|zip|bz2|sit|rar)$ no-gzip dont-varySetEnvIfNoCase Request_URI .(?:pdf|doc)$ no-gzip dont-varyAddOutputFilterByType DEFLATE text/html text/plain text/xml text/cssAddOutputFilterByType DEFLATE application/x-javascript
-------------------------
Relocalhost和127.0.0.1都无法正常访问
哦, 我找到了, 默认目录修改之后这里没有跟上, 感谢版主的帮助, 谢谢!
赞0
踩0