前言
kubeadm是官方社区推出的一个用于快速部署kubernetes集群的工具。
这个工具能通过两条指令完成一个kubernetes集群的部署：
# 创建一个 Master 节点$ kubeadm init # 将一个 Node 节点加入到当前集群中$ kubeadm join <Master节点的IP和端口 >
1. 安装要求
在开始之前，部署Kubernetes集群机器需要满足以下几个条件：
- 一台或多台机器，操作系统 CentOS7.x-86_x64
- 硬件配置：2GB或更多RAM，2个CPU或更多CPU，硬盘30GB或更多
- 可以访问外网，需要拉取镜像，如果服务器不能上网，需要提前下载镜像并导入节点
- 禁止swap分区
2. 准备环境
| 角色 | IP |
| master | 192.168.1.11 |
| node1 | 192.168.1.12 |
| node2 | 192.168.1.13 |
# 关闭防火墙systemctl stop firewalldsystemctl disable firewalld# 关闭selinuxsed -i 's/enforcing/disabled/' /etc/selinux/config # 永久setenforce 0 # 临时# 关闭swapswapoff -a # 临时sed -ri 's/.*swap.*/#&/' /etc/fstab # 永久# 根据规划设置主机名hostnamectl set-hostname <hostname># 在master添加hostscat >> /etc/hosts << EOF192.168.44.146 k8smaster192.168.44.145 k8snode1192.168.44.144 k8snode2EOF# 将桥接的IPv4流量传递到iptables的链cat > /etc/sysctl.d/k8s.conf << EOFnet.bridge.bridge-nf-call-ip6tables = 1net.bridge.bridge-nf-call-iptables = 1EOFsysctl --system # 生效# 时间同步yum install ntpdate -yntpdate time.windows.com
3. 所有节点安装Docker/kubeadm/kubelet
Kubernetes默认CRI（容器运行时）为Docker，因此先安装Docker。
3.1 安装Docker
$ wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo$ yum -y install docker-ce-18.06.1.ce-3.el7$ systemctl enable docker && systemctl start docker$ docker --versionDocker version 18.06.1-ce, build e68fc7a
$ cat > /etc/docker/daemon.json << EOF{ "registry-mirrors": ["https://b9pmyelo.mirror.aliyuncs.com"]}EOF
3.2 添加阿里云YUM软件源
$ cat > /etc/yum.repos.d/kubernetes.repo << EOF[kubernetes]name=Kubernetesbaseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64enabled=1gpgcheck=0repo_gpgcheck=0gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpgEOF
3.3 安装kubeadm，kubelet和kubectl
由于版本更新频繁，这里指定版本号部署：
$ yum install -y kubelet-1.18.0 kubeadm-1.18.0 kubectl-1.18.0$ systemctl enable kubelet
4. 部署Kubernetes Master
在（Master）执行
$ kubeadm init \ --apiserver-advertise-address={master机器的ip} \ --image-repository registry.aliyuncs.com/google_containers \ --kubernetes-version v1.18.0 \ --service-cidr=10.96.0.0/12 \ --pod-network-cidr=10.244.0.0/16
由于默认拉取镜像地址k8s.gcr.io国内无法访问，这里指定阿里云镜像仓库地址。
使用kubectl工具：
mkdir -p $HOME/.kubesudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/configsudo chown $(id -u):$(id -g) $HOME/.kube/config$ kubectl get nodes
5. 加入Kubernetes Node
在（Node）执行。
向集群添加新节点，执行在kubeadm init输出的kubeadm join命令：
$ kubeadm join 192.168.1.11:6443 --token esce21.q6hetwm8si29qxwn \ --discovery-token-ca-cert-hash sha256:00603a05805807501d7181c3d60b478788408cfe6cedefedb1f97569708be9c5
默认token有效期为24小时，当过期之后，该token就不可用了。这时就需要重新创建token，操作如下：
kubeadm token create --print-join-command
6. 部署CNI网络插件
wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
如果下载不下来，就粘贴下面这段到kube-flannel.yml文件中
---apiVersion: policy/v1beta1kind: PodSecurityPolicymetadata: name: psp.flannel.unprivileged annotations: seccomp.security.alpha.kubernetes.io/allowedProfileNames: docker/default seccomp.security.alpha.kubernetes.io/defaultProfileName: docker/default apparmor.security.beta.kubernetes.io/allowedProfileNames: runtime/default apparmor.security.beta.kubernetes.io/defaultProfileName: runtime/defaultspec: privileged: false volumes: - configMap - secret - emptyDir - hostPath allowedHostPaths: - pathPrefix: "/etc/cni/net.d" - pathPrefix: "/etc/kube-flannel" - pathPrefix: "/run/flannel" readOnlyRootFilesystem: false # Users and groups runAsUser: rule: RunAsAny supplementalGroups: rule: RunAsAny fsGroup: rule: RunAsAny # Privilege Escalation allowPrivilegeEscalation: false defaultAllowPrivilegeEscalation: false # Capabilities allowedCapabilities: ['NET_ADMIN'] defaultAddCapabilities: [] requiredDropCapabilities: [] # Host namespaces hostPID: false hostIPC: false hostNetwork: true hostPorts: - min: 0 max: 65535 # SELinux seLinux: # SELinux is unsed in CaaSP rule: 'RunAsAny'---kind: ClusterRoleapiVersion: rbac.authorization.k8s.io/v1beta1metadata: name: flannelrules: - apiGroups: ['extensions'] resources: ['podsecuritypolicies'] verbs: ['use'] resourceNames: ['psp.flannel.unprivileged'] - apiGroups: - "" resources: - pods verbs: - get - apiGroups: - "" resources: - nodes verbs: - list - watch - apiGroups: - "" resources: - nodes/status verbs: - patch---kind: ClusterRoleBindingapiVersion: rbac.authorization.k8s.io/v1beta1metadata: name: flannelroleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: flannelsubjects:- kind: ServiceAccount name: flannel namespace: kube-system---apiVersion: v1kind: ServiceAccountmetadata: name: flannel namespace: kube-system---kind: ConfigMapapiVersion: v1metadata: name: kube-flannel-cfg namespace: kube-system labels: tier: node app: flanneldata: cni-conf.json: | { "cniVersion": "0.2.0", "name": "cbr0", "plugins": [ { "type": "flannel", "delegate": { "hairpinMode": true, "isDefaultGateway": true } }, { "type": "portmap", "capabilities": { "portMappings": true } } ] } net-conf.json: | { "Network": "10.244.0.0/16", "Backend": { "Type": "vxlan" } }---apiVersion: apps/v1kind: DaemonSetmetadata: name: kube-flannel-ds-amd64 namespace: kube-system labels: tier: node app: flannelspec: selector: matchLabels: app: flannel template: metadata: labels: tier: node app: flannel spec: affinity: nodeAffinity: requiredDuringSchedulingIgnoredDuringExecution: nodeSelectorTerms: - matchExpressions: - key: beta.kubernetes.io/os operator: In values: - linux - key: beta.kubernetes.io/arch operator: In values: - amd64 hostNetwork: true tolerations: - operator: Exists effect: NoSchedule serviceAccountName: flannel initContainers: - name: install-cni image: lizhenliang/flannel:v0.11.0-amd64 command: - cp args: - -f - /etc/kube-flannel/cni-conf.json - /etc/cni/net.d/10-flannel.conflist volumeMounts: - name: cni mountPath: /etc/cni/net.d - name: flannel-cfg mountPath: /etc/kube-flannel/ containers: - name: kube-flannel image: lizhenliang/flannel:v0.11.0-amd64 command: - /opt/bin/flanneld args: - --ip-masq - --kube-subnet-mgr resources: requests: cpu: "100m" memory: "50Mi" limits: cpu: "100m" memory: "50Mi" securityContext: privileged: false capabilities: add: ["NET_ADMIN"] env: - name: POD_NAME valueFrom: fieldRef: fieldPath: metadata.name - name: POD_NAMESPACE valueFrom: fieldRef: fieldPath: metadata.namespace volumeMounts: - name: run mountPath: /run/flannel - name: flannel-cfg mountPath: /etc/kube-flannel/ volumes: - name: run hostPath: path: /run/flannel - name: cni hostPath: path: /etc/cni/net.d - name: flannel-cfg configMap: name: kube-flannel-cfg
默认镜像地址无法访问，sed命令修改为docker hub镜像仓库。
kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.ymlkubectl get pods -n kube-systemNAME READY STATUS RESTARTS AGEkube-flannel-ds-amd64-2pc95 1/1 Running 0 72s
7. 测试kubernetes集群
在Kubernetes集群中创建一个pod，验证是否正常运行：
$ kubectl create deployment nginx --image=nginx$ kubectl expose deployment nginx --port=80 --type=NodePort$ kubectl get pod,svc
访问地址：http://NodeIP:Port
