AI 助理
备案控制台
开发者社区 开发与运维 文章 正文

JVM源码分析之Attach机制实现完全解读

2016-01-15 9533
版权
版权声明：
本文内容由阿里云实名注册用户自发贡献，版权归原作者所有，阿里云开发者社区不拥有其著作权，亦不承担相应法律责任。具体规则请查看《 阿里云开发者社区用户服务协议》和 《阿里云开发者社区知识产权保护指引》。如果您发现本社区中有涉嫌抄袭的内容，填写 侵权投诉表单进行举报，一经查实，本社区将立刻删除涉嫌侵权内容。
简介：

Attach是什么

在讲这个之前，我们先来点大家都知道的东西，当我们感觉线程一直卡在某个地方，想知道卡在哪里，首先想到的是进行线程dump，而常用的命令是jstack ，我们就可以看到如下线程栈了

2014-06-18 12:56:14
Full thread dump Java HotSpot(TM) 64-Bit Server VM (24.51-b03 mixed mode):

"Attach Listener" daemon prio=5 tid=0x00007fb0c6800800 nid=0x440b waiting on condition [0x0000000000000000]
   java.lang.Thread.State: RUNNABLE

"Service Thread" daemon prio=5 tid=0x00007fb0c584d800 nid=0x5303 runnable [0x0000000000000000]
   java.lang.Thread.State: RUNNABLE

"C2 CompilerThread1" daemon prio=5 tid=0x00007fb0c482e000 nid=0x5103 waiting on condition [0x0000000000000000]
   java.lang.Thread.State: RUNNABLE

"C2 CompilerThread0" daemon prio=5 tid=0x00007fb0c482c800 nid=0x4f03 waiting on condition [0x0000000000000000]
   java.lang.Thread.State: RUNNABLE

"Signal Dispatcher" daemon prio=5 tid=0x00007fb0c4815800 nid=0x4d03 runnable [0x0000000000000000]
   java.lang.Thread.State: RUNNABLE

"Finalizer" daemon prio=5 tid=0x00007fb0c4813800 nid=0x3903 in Object.wait() [0x00000001187d2000]
   java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x00000007aaa85568> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:135)
    - locked <0x00000007aaa85568> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:151)
    at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:189)

"Reference Handler" daemon prio=5 tid=0x00007fb0c4800000 nid=0x3703 in Object.wait() [0x00000001186cf000]
   java.lang.Thread.State: WAITING (on object monitor)
    at java.lang.Object.wait(Native Method)
    - waiting on <0x00000007aaa850f0> (a java.lang.ref.Reference$Lock)
    at java.lang.Object.wait(Object.java:503)
    at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:133)
    - locked <0x00000007aaa850f0> (a java.lang.ref.Reference$Lock)

"main" prio=5 tid=0x00007fb0c5800800 nid=0x1903 waiting on condition [0x0000000107962000]
   java.lang.Thread.State: TIMED_WAITING (sleeping)
    at java.lang.Thread.sleep(Native Method)
    at Test.main(Test.java:5)

"VM Thread" prio=5 tid=0x00007fb0c583d800 nid=0x3503 runnable

"GC task thread#0 (ParallelGC)" prio=5 tid=0x00007fb0c401e000 nid=0x2503 runnable

"GC task thread#1 (ParallelGC)" prio=5 tid=0x00007fb0c401e800 nid=0x2703 runnable

"GC task thread#2 (ParallelGC)" prio=5 tid=0x00007fb0c401f800 nid=0x2903 runnable

"GC task thread#3 (ParallelGC)" prio=5 tid=0x00007fb0c4020000 nid=0x2b03 runnable

"GC task thread#4 (ParallelGC)" prio=5 tid=0x00007fb0c4020800 nid=0x2d03 runnable

"GC task thread#5 (ParallelGC)" prio=5 tid=0x00007fb0c4021000 nid=0x2f03 runnable

"GC task thread#6 (ParallelGC)" prio=5 tid=0x00007fb0c4022000 nid=0x3103 runnable

"GC task thread#7 (ParallelGC)" prio=5 tid=0x00007fb0c4022800 nid=0x3303 runnable

"VM Periodic Task Thread" prio=5 tid=0x00007fb0c5845000 nid=0x5503 waiting on condition

大家是否注意过上面圈起来的两个线程，”Attach Listener”和“Signal Dispatcher”，这两个线程是我们这次要讲的Attach机制的关键，先偷偷告诉各位，其实Attach Listener这个线程在jvm起来的时候可能并没有的，后面会细说。

那Attach机制是什么？说简单点就是jvm提供一种jvm进程间通信的能力，能让一个进程传命令给另外一个进程，并让它执行内部的一些操作，比如说我们为了让另外一个jvm进程把线程dump出来，那么我们跑了一个jstack的进程，然后传了个pid的参数，告诉它要哪个进程进行线程dump，既然是两个进程，那肯定涉及到进程间通信，以及传输协议的定义，比如要执行什么操作，传了什么参数等

Attach能做些什么

  总结起来说，比如内存dump，线程dump，类信息统计(比如加载的类及大小以及实例个数等)，动态加载agent(使用过btrace的应该不陌生)，动态设置vm flag(但是并不是所有的flag都可以设置的，因为有些flag是在jvm启动过程中使用的，是一次性的)，打印vm flag，获取系统属性等，这些对应的源码(AttachListener.cpp)如下

static AttachOperationFunctionInfo funcs[] = {
  { "agentProperties",  get_agent_properties },
  { "datadump",         data_dump },
  { "dumpheap",         dump_heap },
  { "load",             JvmtiExport::load_agent_library },
  { "properties",       get_system_properties },
  { "threaddump",       thread_dump },
  { "inspectheap",      heap_inspection },
  { "setflag",          set_flag },
  { "printflag",        print_flag },
  { "jcmd",             jcmd },
  { NULL,               NULL }
};

后面是命令对应的处理函数。

Attach在jvm里如何实现的

Attach Listener线程的创建

前面也提到了，jvm在启动过程中可能并没有启动Attach Listener这个线程，可以通过jvm参数来启动，代码 （Threads::create_vm）如下：

  if (!DisableAttachMechanism) {
    if (StartAttachListener || AttachListener::init_at_startup()) {
      AttachListener::init();
    }
  }
bool AttachListener::init_at_startup() {
  if (ReduceSignalUsage) {
    return true;
  } else {
    return false;
  }
}

其中DisableAttachMechanism，StartAttachListener ，ReduceSignalUsage均默认是false(globals.hpp)

product(bool, DisableAttachMechanism, false,                              \
         "Disable mechanism that allows tools to Attach to this VM”)   
product(bool, StartAttachListener, false,                                 \
          "Always start Attach Listener at VM startup")  
product(bool, ReduceSignalUsage, false,                                   \
          "Reduce the use of OS signals in Java and/or the VM”)

因此AttachListener::init()并不会被执行，而Attach Listener线程正是在此方法里创建的

// Starts the Attach Listener thread
void AttachListener::init() {
  EXCEPTION_MARK;
  klassOop k = SystemDictionary::resolve_or_fail(vmSymbols::java_lang_Thread(), true, CHECK);
  instanceKlassHandle klass (THREAD, k);
  instanceHandle thread_oop = klass->allocate_instance_handle(CHECK);

  const char thread_name[] = "Attach Listener";
  Handle string = java_lang_String::create_from_str(thread_name, CHECK);

  // Initialize thread_oop to put it into the system threadGroup
  Handle thread_group (THREAD, Universe::system_thread_group());
  JavaValue result(T_VOID);
  JavaCalls::call_special(&result, thread_oop,
                       klass,
                       vmSymbols::object_initializer_name(),
                       vmSymbols::threadgroup_string_void_signature(),
                       thread_group,
                       string,
                       CHECK);

  KlassHandle group(THREAD, SystemDictionary::ThreadGroup_klass());
  JavaCalls::call_special(&result,
                        thread_group,
                        group,
                        vmSymbols::add_method_name(),
                        vmSymbols::thread_void_signature(),
                        thread_oop,             // ARG 1
                        CHECK);

  { MutexLocker mu(Threads_lock);
    JavaThread* listener_thread = new JavaThread(&Attach_listener_thread_entry);

    // Check that thread and osthread were created
    if (listener_thread == NULL || listener_thread->osthread() == NULL) {
      vm_exit_during_initialization("java.lang.OutOfMemoryError",
                                    "unable to create new native thread");
    }

    java_lang_Thread::set_thread(thread_oop(), listener_thread);
    java_lang_Thread::set_daemon(thread_oop());

    listener_thread->set_threadObj(thread_oop());
    Threads::add(listener_thread);
    Thread::start(listener_thread);
  }
}

既然在启动的时候不会创建这个线程，那么我们在上面看到的那个线程是怎么创建的呢，这个就要关注另外一个线程“Signal Dispatcher”了，顾名思义是处理信号的，这个线程是在jvm启动的时候就会创建的，具体代码就不说了。

下面以jstack的实现来说明触发Attach这一机制进行的过程，jstack命令的实现其实是一个叫做JStack.java的类，查看jstack代码后会走到下面的方法里

private static void runThreadDump(String pid, String args[]) throws Exception {
        VirtualMachine vm = null;
        try {
            vm = VirtualMachine.Attach(pid);
        } catch (Exception x) {
            String msg = x.getMessage();
            if (msg != null) {
                System.err.println(pid + ": " + msg);
            } else {
                x.printStackTrace();
            }
            if ((x instanceof AttachNotSupportedException) &&
                (loadSAClass() != null)) {
                System.err.println("The -F option can be used when the target " +
                    "process is not responding");
            }
            System.exit(1);
        }

        // Cast to HotSpotVirtualMachine as this is implementation specific
        // method.
        InputStream in = ((HotSpotVirtualMachine)vm).remoteDataDump((Object[])args);

        // read to EOF and just print output
        byte b[] = new byte[256];
        int n;
        do {
            n = in.read(b);
            if (n > 0) {
                String s = new String(b, 0, n, "UTF-8");
                System.out.print(s);
            }
        } while (n > 0);
        in.close();
        vm.detach();
    }

请注意VirtualMachine.Attach(pid);这行代码，触发Attach pid的关键，如果是在linux下会走到下面的构造函数

LinuxVirtualMachine(AttachProvider provider, String vmid)
        throws AttachNotSupportedException, IOException
    {
        super(provider, vmid);

        // This provider only understands pids
        int pid;
        try {
            pid = Integer.parseInt(vmid);
        } catch (NumberFormatException x) {
            throw new AttachNotSupportedException("Invalid process identifier");
        }

        // Find the socket file. If not found then we attempt to start the
        // Attach mechanism in the target VM by sending it a QUIT signal.
        // Then we attempt to find the socket file again.
        path = findSocketFile(pid);
        if (path == null) {
            File f = createAttachFile(pid);
            try {
                // On LinuxThreads each thread is a process and we don't have the
                // pid of the VMThread which has SIGQUIT unblocked. To workaround
                // this we get the pid of the "manager thread" that is created
                // by the first call to pthread_create. This is parent of all
                // threads (except the initial thread).
                if (isLinuxThreads) {
                    int mpid;
                    try {
                        mpid = getLinuxThreadsManager(pid);
                    } catch (IOException x) {
                        throw new AttachNotSupportedException(x.getMessage());
                    }
                    assert(mpid >= 1);
                    sendQuitToChildrenOf(mpid);
                } else {
                    sendQuitTo(pid);
                }

                // give the target VM time to start the Attach mechanism
                int i = 0;
                long delay = 200;
                int retries = (int)(AttachTimeout() / delay);
                do {
                    try {
                        Thread.sleep(delay);
                    } catch (InterruptedException x) { }
                    path = findSocketFile(pid);
                    i++;
                } while (i <= retries && path == null);
                if (path == null) {
                    throw new AttachNotSupportedException(
                        "Unable to open socket file: target process not responding " +
                        "or HotSpot VM not loaded");
                }
            } finally {
                f.delete();
            }
        }

        // Check that the file owner/permission to avoid Attaching to
        // bogus process
        checkPermissions(path);

        // Check that we can connect to the process
        // - this ensures we throw the permission denied error now rather than
        // later when we attempt to enqueue a command.
        int s = socket();
        try {
            connect(s, path);
        } finally {
            close(s);
        }
    }

这里要解释下代码了，首先看到调用了createAttachFile方法在目标进程的cwd目录下创建了一个文件/proc//cwd/.Attach_pid，这个在后面的信号处理过程中会取出来做判断(为了安全)，另外我们知道在linux下线程是用进程实现的，在jvm启动过程中会创建很多线程，比如我们上面的信号线程，也就是会看到很多的pid(应该是LWP)，那么如何找到这个信号处理线程呢，从上面实现来看是找到我们传进去的pid的父进程，然后给它的所有子进程都发送一个SIGQUIT信号，而jvm里除了信号线程，其他线程都设置了对此信号的屏蔽，因此收不到该信号，于是该信号就传给了“Signal Dispatcher”，在传完之后作轮询等待看目标进程是否创建了某个文件，AttachTimeout默认超时时间是5000ms，可通过设置系统变量sun.tools.Attach.AttachTimeout来指定，下面是Signal Dispatcher线程的entry实现

static void signal_thread_entry(JavaThread* thread, TRAPS) {
  os::set_priority(thread, NearMaxPriority);
  while (true) {
    int sig;
    {
      // FIXME : Currently we have not decieded what should be the status
      //         for this java thread blocked here. Once we decide about
      //         that we should fix this.
      sig = os::signal_wait();
    }
    if (sig == os::sigexitnum_pd()) {
       // Terminate the signal thread
       return;
    }

    switch (sig) {
      case SIGBREAK: {
        // Check if the signal is a trigger to start the Attach Listener - in that
        // case don't print stack traces.
        if (!DisableAttachMechanism && AttachListener::is_init_trigger()) {
          continue;
        }
        // Print stack traces
        // Any SIGBREAK operations added here should make sure to flush
        // the output stream (e.g. tty->flush()) after output.  See 4803766.
        // Each module also prints an extra carriage return after its output.
        VM_PrintThreads op;
        VMThread::execute(&op);
        VM_PrintJNI jni_op;
        VMThread::execute(&jni_op);
        VM_FindDeadlocks op1(tty);
        VMThread::execute(&op1);
        Universe::print_heap_at_SIGBREAK();
        if (PrintClassHistogram) {
          VM_GC_HeapInspection op1(gclog_or_tty, true /* force full GC before heap inspection */,
                                   true /* need_prologue */);
          VMThread::execute(&op1);
        }
        if (JvmtiExport::should_post_data_dump()) {
          JvmtiExport::post_data_dump();
        }
        break;
      }
      ….
      }
    }
  }
}

当信号是SIGBREAK(在jvm里做了#define，其实就是SIGQUIT)的时候，就会触发 
AttachListener::is_init_trigger()的执行，

bool AttachListener::is_init_trigger() {
  if (init_at_startup() || is_initialized()) {
    return false;               // initialized at startup or already initialized
  }
  char fn[PATH_MAX+1];
  sprintf(fn, ".Attach_pid%d", os::current_process_id());
  int ret;
  struct stat64 st;
  RESTARTABLE(::stat64(fn, &st), ret);
  if (ret == -1) {
    snprintf(fn, sizeof(fn), "%s/.Attach_pid%d",
             os::get_temp_directory(), os::current_process_id());
    RESTARTABLE(::stat64(fn, &st), ret);
  }
  if (ret == 0) {
    // simple check to avoid starting the Attach mechanism when
    // a bogus user creates the file
    if (st.st_uid == geteuid()) {
      init();
      return true;
    }
  }
  return false;
}

一开始会判断当前进程目录下是否有个.Attach_pid文件（前面提到了），如果没有就会在/tmp下创建一个/tmp/.Attach_pid，当那个文件的uid和自己的uid是一致的情况下（为了安全）再调用init方法

// Starts the Attach Listener thread
void AttachListener::init() {
  EXCEPTION_MARK;
  klassOop k = SystemDictionary::resolve_or_fail(vmSymbols::java_lang_Thread(), true, CHECK);
  instanceKlassHandle klass (THREAD, k);
  instanceHandle thread_oop = klass->allocate_instance_handle(CHECK);

  const char thread_name[] = "Attach Listener";
  Handle string = java_lang_String::create_from_str(thread_name, CHECK);

  // Initialize thread_oop to put it into the system threadGroup
  Handle thread_group (THREAD, Universe::system_thread_group());
  JavaValue result(T_VOID);
  JavaCalls::call_special(&result, thread_oop,
                       klass,
                       vmSymbols::object_initializer_name(),
                       vmSymbols::threadgroup_string_void_signature(),
                       thread_group,
                       string,
                       CHECK);

  KlassHandle group(THREAD, SystemDictionary::ThreadGroup_klass());
  JavaCalls::call_special(&result,
                        thread_group,
                        group,
                        vmSymbols::add_method_name(),
                        vmSymbols::thread_void_signature(),
                        thread_oop,             // ARG 1
                        CHECK);

  { MutexLocker mu(Threads_lock);
    JavaThread* listener_thread = new JavaThread(&Attach_listener_thread_entry);

    // Check that thread and osthread were created
    if (listener_thread == NULL || listener_thread->osthread() == NULL) {
      vm_exit_during_initialization("java.lang.OutOfMemoryError",
                                    "unable to create new native thread");
    }

    java_lang_Thread::set_thread(thread_oop(), listener_thread);
    java_lang_Thread::set_daemon(thread_oop());

    listener_thread->set_threadObj(thread_oop());
    Threads::add(listener_thread);
    Thread::start(listener_thread);
  }
}

此时水落石出了，看到创建了一个线程，并且取名为Attach Listener。再看看其子类LinuxAttachListener的init方法

int LinuxAttachListener::init() {
  char path[UNIX_PATH_MAX];          // socket file
  char initial_path[UNIX_PATH_MAX];  // socket file during setup
  int listener;                      // listener socket (file descriptor)

  // register function to cleanup
  ::atexit(listener_cleanup);

  int n = snprintf(path, UNIX_PATH_MAX, "%s/.java_pid%d",
                   os::get_temp_directory(), os::current_process_id());
  if (n < (int)UNIX_PATH_MAX) {
    n = snprintf(initial_path, UNIX_PATH_MAX, "%s.tmp", path);
  }
  if (n >= (int)UNIX_PATH_MAX) {
    return -1;
  }

  // create the listener socket
  listener = ::socket(PF_UNIX, SOCK_STREAM, 0);
  if (listener == -1) {
    return -1;
  }

  // bind socket
  struct sockaddr_un addr;
  addr.sun_family = AF_UNIX;
  strcpy(addr.sun_path, initial_path);
  ::unlink(initial_path);
  int res = ::bind(listener, (struct sockaddr*)&addr, sizeof(addr));
  if (res == -1) {
    RESTARTABLE(::close(listener), res);
    return -1;
  }

  // put in listen mode, set permissions, and rename into place
  res = ::listen(listener, 5);
  if (res == 0) {
      RESTARTABLE(::chmod(initial_path, S_IREAD|S_IWRITE), res);
      if (res == 0) {
          res = ::rename(initial_path, path);
      }
  }
  if (res == -1) {
    RESTARTABLE(::close(listener), res);
    ::unlink(initial_path);
    return -1;
  }
  set_path(path);
  set_listener(listener);

  return 0;
}

看到其创建了一个监听套接字，并创建了一个文件/tmp/.java_pid，这个文件就是客户端之前一直在轮询等待的文件，随着这个文件的生成，意味着Attach的过程圆满结束了。

Attach listener接收请求

  看看它的entry实现Attach_listener_thread_entry

static void Attach_listener_thread_entry(JavaThread* thread, TRAPS) {
  os::set_priority(thread, NearMaxPriority);

  thread->record_stack_base_and_size();

  if (AttachListener::pd_init() != 0) {
    return;
  }
  AttachListener::set_initialized();

  for (;;) {
    AttachOperation* op = AttachListener::dequeue();
    if (op == NULL) {
      return;   // dequeue failed or shutdown
    }

    ResourceMark rm;
    bufferedStream st;
    jint res = JNI_OK;

    // handle special detachall operation
    if (strcmp(op->name(), AttachOperation::detachall_operation_name()) == 0) {
      AttachListener::detachall();
    } else {
      // find the function to dispatch too
      AttachOperationFunctionInfo* info = NULL;
      for (int i=0; funcs[i].name != NULL; i++) {
        const char* name = funcs[i].name;
        assert(strlen(name) <= AttachOperation::name_length_max, "operation <= name_length_max");
        if (strcmp(op->name(), name) == 0) {
          info = &(funcs[i]);
          break;
        }
      }

      // check for platform dependent Attach operation
      if (info == NULL) {
        info = AttachListener::pd_find_operation(op->name());
      }

      if (info != NULL) {
        // dispatch to the function that implements this operation
        res = (info->func)(op, &st);
      } else {
        st.print("Operation %s not recognized!", op->name());
        res = JNI_ERR;
      }
    }

    // operation complete - send result and output to client
    op->complete(res, &st);
  }
}

从代码来看就是从队列里不断取AttachOperation，然后找到请求命令对应的方法进行执行，比如我们一开始说的jstack命令，找到 { “threaddump”, thread_dump }的映射关系，然后执行thread_dump方法

再来看看其要调用的AttachListener::dequeue()，

AttachOperation* AttachListener::dequeue() {
  JavaThread* thread = JavaThread::current();
  ThreadBlockInVM tbivm(thread);

  thread->set_suspend_equivalent();
  // cleared by handle_special_suspend_equivalent_condition() or
  // java_suspend_self() via check_and_wait_while_suspended()

  AttachOperation* op = LinuxAttachListener::dequeue();

  // were we externally suspended while we were waiting?
  thread->check_and_wait_while_suspended();

  return op;
}

最终调用的是LinuxAttachListener::dequeue()，

LinuxAttachOperation* LinuxAttachListener::dequeue() {
  for (;;) {
    int s;

    // wait for client to connect
    struct sockaddr addr;
    socklen_t len = sizeof(addr);
    RESTARTABLE(::accept(listener(), &addr, &len), s);
    if (s == -1) {
      return NULL;      // log a warning?
    }

    // get the credentials of the peer and check the effective uid/guid
    // - check with jeff on this.
    struct ucred cred_info;
    socklen_t optlen = sizeof(cred_info);
    if (::getsockopt(s, SOL_SOCKET, SO_PEERCRED, (void*)&cred_info, &optlen) == -1) {
      int res;
      RESTARTABLE(::close(s), res);
      continue;
    }
    uid_t euid = geteuid();
    gid_t egid = getegid();

    if (cred_info.uid != euid || cred_info.gid != egid) {
      int res;
      RESTARTABLE(::close(s), res);
      continue;
    }

    // peer credential look okay so we read the request
    LinuxAttachOperation* op = read_request(s);
    if (op == NULL) {
      int res;
      RESTARTABLE(::close(s), res);
      continue;
    } else {
      return op;
    }
  }
}

我们看到如果没有请求的话，会一直accept在那里，当来了请求，然后就会创建一个套接字，并读取数据，构建出LinuxAttachOperation返回并执行。

整个过程就这样了，从Attach线程创建到接收请求，处理请求。

PS:此文写了很久了，http://lovestblog.cn/blog/2014/06/18/jvm-attach/，还迁移过一次blog，最近询问attach的人比较多，所以将此文迁移过来

该文章来自阿里巴巴技术协会（ATA）精选集

文章标签：
云虚拟主机
Java
关键词：
JVM机制
JVM attach
JVM源码分析
JVM源码分析机制
JVM源码分析attach
寒泉子
目录
相关文章
土木林森
|
4月前
|
安全 前端开发 Java
【JVM的秘密揭秘】深入理解类加载器与双亲委派机制的奥秘！
【8月更文挑战第25天】在Java技术栈中，深入理解JVM类加载机制及其双亲委派模型是至关重要的。JVM类加载器作为运行时系统的关键组件，负责将字节码文件加载至内存并转换为可执行的数据结构。其采用层级结构，包括引导、扩展、应用及用户自定义类加载器，通过双亲委派机制协同工作，确保Java核心库的安全性与稳定性。本文通过解析类加载器的分类、双亲委派机制原理及示例代码，帮助读者全面掌握这一核心概念，为开发更安全高效的Java应用程序奠定基础。
土木林森
98 0
java冯坚持
|
2月前
|
缓存 前端开发 Java
JVM知识体系学习二：ClassLoader 类加载器、类加载器层次、类过载过程之双亲委派机制、类加载范围、自定义类加载器、编译器、懒加载模式、打破双亲委派机制
这篇文章详细介绍了JVM中ClassLoader的工作原理，包括类加载器的层次结构、双亲委派机制、类加载过程、自定义类加载器的实现，以及如何打破双亲委派机制来实现热部署等功能。
java冯坚持
76 3
qhhf_地道酬勤
|
3月前
|
Arthas Java 测试技术
JVM —— 类加载器的分类，双亲委派机制
类加载器的分类，双亲委派机制：启动类加载器、扩展类加载器、应用程序类加载器、自定义类加载器；JDK8及之前的版本，JDK9之后的版本；什么是双亲委派模型，双亲委派模型的作用，如何打破双亲委派机制
qhhf_地道酬勤
38 0
JVM —— 类加载器的分类，双亲委派机制
土木林森
|
4月前
|
开发者 C# Windows
WPF布局大揭秘：掌握布局技巧，轻松创建响应式用户界面，让你的应用程序更上一层楼！
【8月更文挑战第31天】在现代软件开发中，响应式用户界面至关重要。WPF（Windows Presentation Foundation）作为.NET框架的一部分，提供了丰富的布局控件和机制，便于创建可自动调整的UI。本文介绍WPF布局的基础概念与实现方法，包括`StackPanel`、`DockPanel`、`Grid`等控件的使用，并通过示例代码展示如何构建响应式布局。了解这些技巧有助于开发者优化用户体验，适应不同设备和屏幕尺寸。
土木林森
130 0
william.zhang(张)
|
4月前
|
存储 监控 算法
深入解析JVM内部结构及GC机制的实战应用
深入解析JVM内部结构及GC机制的实战应用
william.zhang(张)
44 0
竹子爱熊猫
|
5月前
|
存储 前端开发 Java
（二）JVM成神路之剖析Java类加载子系统、双亲委派机制及线程上下文类加载器
上篇《初识Java虚拟机》文章中曾提及到：我们所编写的Java代码经过编译之后，会生成对应的class字节码文件，而在程序启动时会通过类加载子系统将这些字节码文件先装载进内存，然后再交由执行引擎执行。本文中则会对Java虚拟机的类加载机制以及执行引擎进行全面分析。
竹子爱熊猫
103 0
shuj
|
6月前
|
监控 算法 Java
深入理解Java虚拟机：垃圾收集机制的奥秘
【6月更文挑战第17天】在Java的世界，垃圾收集（GC）是保持内存健康不可或缺的一环。本文将揭开JVM垃圾收集的神秘面纱，探索其原理、算法及调优策略，帮助开发者更好地理解和掌握这一关键技术，确保Java应用的性能与稳定性。
shuj
44 5
游客762btuqu5wybw666
|
5月前
|
监控 算法 Java
Java虚拟机垃圾收集机制深度解析
在Java的世界中，垃圾收集是确保内存管理高效运行的关键机制之一。本文将深入探讨Java虚拟机的垃圾收集机制，包括其工作原理、常见的垃圾收集算法以及调优实践。我们将基于最新的研究数据和实验结果，提供对垃圾收集器性能的比较分析，并讨论如何根据不同应用场景进行优化。通过逻辑严密的分析，我们旨在为Java开发者提供实用的指导，以帮助他们更好地理解和掌握这一关键技术。
游客762btuqu5wybw666
32 0
码农阿豪
|
6月前
|
安全 前端开发 Java
《JVM由浅入深学习【一】 》JVM由简入深学习提升（类加载过程+父子类加载过程+类加载器+双亲委派机制）
《JVM由浅入深学习【一】 》JVM由简入深学习提升（类加载过程+父子类加载过程+类加载器+双亲委派机制）
码农阿豪
48 0
敖小军
|
6月前
|
存储 缓存 算法
JVM对象创建与内存分配机制
该类对应的java.lang.Class 对象没有在任何地方被引用，无法在任何地方通过反射访问该类的方法。
敖小军
48 0