[编程资料]函数名: qsort
功 能: 使用快速排序例程进行排序
用 法: void qsort(void *base, int nelem, int width, int (*fcmp)());
程序例: <?xml:namespace prefix="o" ns="urn:schemas-microsoft-com:office:office"?>
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>
int sort_function( const void *a, const void *b);
char list[5][4] = { "cat", "car", "cab", "cap", "can" };
int main(void)
{
int x;
qsort((void *)list, 5, sizeof(list[0]), sort_function);
for (x = 0; x < 5; x++)
printf("%s\n", list[x]);
return 0;
}
int sort_function( const void *a, const void *b)
{
return( strcmp(a,b) );
}
函数名: qsort
功 能: 使用快速排序例程进行排序
用 法: void qsort(void *base, int nelem, int width, int (*fcmp)());
程序例:
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>
int sort_function( const void *a, const void *b);
char list[5][4] = { "cat", "car", "cab", "cap", "can" };
int main(void)
{
int x;
qsort((void *)list, 5, sizeof(list[0]), sort_function);
for (x = 0; x < 5; x++)
printf("%s\n", list[x]);
return 0;
}
int sort_function( const void *a, const void *b)
{
return( strcmp(a,b) );
}
函数名: raise
功 能: 向正在执行的程序发送一个信号
用 法: int raise(int sig);
程序例:
＃i nclude .h>
int main(void)
{
int a, b;
a = 10;
b = 0;
if (b == 0)
/* preempt divide by zero error */
raise(SIGFPE);
a = a / b;
return 0;
}
函数名: rand
功 能: 随机数发生器
用 法: void rand(void);
程序例:
＃i nclude
＃i nclude .h>.h>
int main(void)
{
int i;
printf("Ten random numbers from 0 to 99\n\n");
for(i=0; i<10; i++)
printf("%d\n", rand() % 100);
return 0;
}
函数名: randbrd
功 能: 随机块读
用 法: int randbrd(struct fcb *fcbptr, int reccnt);
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>.h>
int main(void)
{
char far *save_dta;
char line[80], buffer[256];
struct fcb blk;
int i, result;
/* get user input file name for dta */
printf("Enter drive and file name (no path - i.e. a:file.dat)\n");
gets(line);
/* put file name in fcb */
if (!parsfnm(line, &blk, 1))
{
printf("Error in call to parsfnm\n");
exit(1);
}
printf("Drive #%d file: %s\n\n", blk.fcb_drive, blk.fcb_name);
/* open file with DOS FCB open file */
bdosptr(0x0F, &blk, 0);
/* save old dta, and set new one */
save_dta = getdta();
setdta(buffer);
/* set up info for the new dta */
blk.fcb_recsize = 128;
blk.fcb_random = 0L;
result = randbrd(&blk, 1);
/* check results from randbrd */
if (!result)
printf("Read OK\n\n");
else
{
perror("Error during read");
exit(1);
}
/* read in data from the new dta */
printf("The first 128 characters are:\n");
for (i=0; i<128; i++)
putchar(buffer[i]);
/* restore previous dta */
setdta(save_dta);
return 0;
}
函数名: randbwr
功 能: 随机块写
用 法: int randbwr(struct fcp *fcbptr, int reccnt);
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>.h>
int main(void)
{
char far *save_dta;
char line[80];
char buffer[256] = "RANDBWR test!";
struct fcb blk;
int result;
/* get new file name from user */
printf("Enter a file name to create (no path - ie. a:file.dat\n");
gets(line);
/* parse the new file name to the dta */
parsfnm(line,&blk,1);
printf("Drive #%d file: %s\n", blk.fcb_drive, blk.fcb_name);
/* request DOS services to create file */
if (bdosptr(0x16, &blk, 0) == -1)
{
perror("Error creating file");
exit(1);
}
/* save old dta and set new dta */
save_dta = getdta();
setdta(buffer);
/* write new records */
blk.fcb_recsize = 256;
blk.fcb_random = 0L;
result = randbwr(&blk, 1);
if (!result)
printf("Write OK\n");
else
{
perror("Disk error");
exit(1);
}
/* request DOS services to close the file */
if (bdosptr(0x10, &blk, 0) == -1)
{
perror("Error closing file");
exit(1);
}
/* reset the old dta */
setdta(save_dta);
return 0;
}
函数名: random
功 能: 随机数发生器
用 法: int random(int num);
程序例:
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>
/* prints a random number in the range 0 to 99 */
int main(void)
{
randomize();
printf("Random number in the 0-99 range: %d\n", random (100));
return 0;
}
函数名: randomize
功 能: 初始化随机数发生器
用 法: void randomize(void);
程序例:
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>
int main(void)
{
int i;
randomize();
printf("Ten random numbers from 0 to 99\n\n");
for(i=0; i<10; i++)
printf("%d\n", rand() % 100);
return 0;
}
函数名: read
功 能: 从文件中读
用 法: int read(int handle, void *buf, int nbyte);
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude
＃i nclude
＃i nclude \stat.h>.h>.h>.h>.h>.h>
int main(void)
{
void *buf;
int handle, bytes;
buf = malloc(10);
/*
Looks for a file in the current directory named TEST.$$$ and attempts
to read 10 bytes from it. To use this example you should create the
file TEST.$$$
*/
if ((handle =
open("TEST.$$$", O_RDONLY | O_BINARY, S_IWRITE | S_IREAD)) == -1)
{
printf("Error Opening File\n");
exit(1);
}
if ((bytes = read(handle, buf, 10)) == -1) {
printf("Read Failed.\n");
exit(1);
}
else {
printf("Read: %d bytes read.\n", bytes);
}
return 0;
}
函数名: realloc
功 能: 重新分配主存
用 法: void *realloc(void *ptr, unsigned newsize);
程序例:
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>
int main(void)
{
char *str;
/* allocate memory for string */
str = malloc(10);
/* copy "Hello" into string */
strcpy(str, "Hello");
printf("String is %s\n Address is %p\n", str, str);
str = realloc(str, 20);
printf("String is %s\n New address is %p\n", str, str);
/* free memory */
free(str);
return 0;
}
函数名: rectangle
功 能: 画一个矩形
用 法: void far rectangle(int left, int top, int right, int bottom);
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int left, top, right, bottom;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
left = getmaxx() / 2 - 50;
top = getmaxy() / 2 - 50;
right = getmaxx() / 2 + 50;
bottom = getmaxy() / 2 + 50;
/* draw a rectangle */
rectangle(left,top,right,bottom);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: registerbgidriver
功 能: 登录已连接进来的图形驱动程序代码
用 法: int registerbgidriver(void(*driver)(void));
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
/* register a driver that was added into graphics.lib */
errorcode = registerbgidriver(EGAVGA_driver);
/* report any registration errors */
if (errorcode < 0)
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
/* draw a line */
line(0, 0, getmaxx(), getmaxy());
/* clean up */
getch();
closegraph();
return 0;
}
函数名: remove
功 能: 删除一个文件
用 法: int remove(char *filename);
程序例:
＃i nclude .h>
int main(void)
{
char file[80];
/* prompt for file name to delete */
printf("File to delete: ");
gets(file);
/* delete the file */
if (remove(file) == 0)
printf("Removed %s.\n",file);
else
perror("remove");
return 0;
}
函数名: rename
功 能: 重命名文件
用 法: int rename(char *oldname, char *newname);
程序例:
＃i nclude .h>
int main(void)
{
char oldname[80], newname[80];
/* prompt for file to rename and new name */
printf("File to rename: ");
gets(oldname);
printf("New name: ");
gets(newname);
/* Rename the file */
if (rename(oldname, newname) == 0)
printf("Renamed %s to %s.\n", oldname, newname);
else
perror("rename");
return 0;
}
函数名: restorecrtmode
功 能: 将屏幕模式恢复为先前的imitgraph设置
用 法: void far restorecrtmode(void);
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int x, y;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
x = getmaxx() / 2;
y = getmaxy() / 2;
/* output a message */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(x, y, "Press any key to exit graphics:");
getch();
/* restore system to text mode */
restorecrtmode();
printf("We're now in text mode.\n");
printf("Press any key to return to graphics mode:");
getch();
/* return to graphics mode */
setgraphmode(getgraphmode());
/* output a message */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(x, y, "We're back in graphics mode.");
outtextxy(x, y+textheight("W"), "Press any key to halt:");
/* clean up */
getch();
closegraph();
return 0;
}
函数名: rewind
功 能: 将文件指针重新指向一个流的开头
用 法: int rewind(FILE *stream);
程序例:
＃i nclude
＃i nclude .h>.h>
int main(void)
{
FILE *fp;
char *fname = "TXXXXXX", *newname, first;
newname = mktemp(fname);
fp = fopen(newname,"w+");
fprintf(fp,"abcdefghijklmnopqrstuvwxyz");
rewind(fp);
fscanf(fp,"%c",&first);
printf("The first character is: %c\n",first);
fclose(fp);
remove(newname);
return 0;
}
函数名: rmdir
功 能: 删除DOS文件目录
用 法: int rmdir(char *stream);
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>.h>
#define DIRNAME "testdir.$$$"
int main(void)
{
int stat;
stat = mkdir(DIRNAME);
if (!stat)
printf("Directory created\n");
else
{
printf("Unable to create directory\n");
exit(1);
}
getch();
system("dir/p");
getch();
stat = rmdir(DIRNAME);
if (!stat)
printf("\nDirectory deleted\n");
else
{
perror("\nUnable to delete directory\n");
exit(1);
}
return 0;
}
函数名: sbrk
功 能: 改变数据段空间位置
用 法: char *sbrk(int incr);
程序例:
＃i nclude
＃i nclude .h>.h>
int main(void)
{
printf("Changing allocation with sbrk()\n");
printf("Before sbrk() call: %lu bytes free\n",
(unsigned long) coreleft());
sbrk(1000);
printf(" After sbrk() call: %lu bytes free\n",
(unsigned long) coreleft());
return 0;
}
函数名: scanf
功 能: 执行格式化输入
用 法: int scanf(char *format[,argument,...]);
程序例:
＃i nclude
＃i nclude .h>.h>
int main(void)
{
char label[20];
char name[20];
int entries = 0;
int loop, age;
double salary;
struct Entry_struct
{
char name[20];
int age;
float salary;
} entry[20];
/* Input a label as a string of characters restricting to 20 characters */
printf("\n\nPlease enter a label for the chart: ");
scanf("%20s", label);
fflush(stdin); /* flush the input stream in case of bad input */
/* Input number of entries as an integer */
printf("How many entries will there be? (less than 20) ");
scanf("%d", &entries);
fflush(stdin); /* flush the input stream in case of bad input */
/* input a name restricting input to only letters upper or lower case */
for (loop=0;loop
{
printf("Entry %d\n", loop);
printf(" Name : ");
scanf("%[A-Za-z]", entry[loop].name);
fflush(stdin); /* flush the input stream in case of bad input */ ;++loop)>
/* input an age as an integer */
printf(" Age : ");
scanf("%d", &entry[loop].age);
fflush(stdin); /* flush the input stream in case of bad input */
/* input a salary as a float */
printf(" Salary : ");
scanf("%f", &entry[loop].salary);
fflush(stdin); /* flush the input stream in case of bad input */
}
/* Input a name, age and salary as a string, integer, and double */
printf("\nPlease enter your name, age and salary\n");
scanf("%20s %d %lf", name, &age, &salary);
/* Print out the data that was input */
printf("\n\nTable %s\n",label);
printf("Compiled by %s age %d $%15.2lf\n", name, age, salary);
printf("-----------------------------------------------------\n");
for (loop=0;loop
printf("%4d | %-20s | %5d | %15.2lf\n",
loop + 1,
entry[loop].name,
entry[loop].age,
entry[loop].salary);
printf("-----------------------------------------------------\n");
return 0;
} ;++loop)>
函数名: searchpath
功 能: 搜索DOS路径
用 法: char *searchpath(char *filename);
程序例:
＃i nclude
＃i nclude .h>.h>
int main(void)
{
char *p;
/* Looks for TLINK and returns a pointer
to the path */
p = searchpath("TLINK.EXE");
printf("Search for TLINK.EXE : %s\n", p);
/* Looks for non-existent file */
p = searchpath("NOTEXIST.FIL");
printf("Search for NOTEXIST.FIL : %s\n", p);
return 0;
}
函数名: sector
功 能: 画并填充椭圆扇区
用 法: void far sector(int x, int y, int stangle, int endangle);
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int midx, midy, i;
int stangle = 45, endangle = 135;
int xrad = 100, yrad = 50;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
/* loop through the fill patterns */
for (i=EMPTY_FILL; i
{
/* set the fill style */
setfillstyle(i, getmaxcolor()); ;>
/* draw the sector slice */
sector(midx, midy, stangle, endangle, xrad, yrad);
getch();
}
/* clean up */
closegraph();
return 0;
}
函数名: segread
功 能: 读段寄存器值
用 法: void segread(struct SREGS *segtbl);
程序例:
＃i nclude
＃i nclude .h>.h>
int main(void)
{
struct SREGS segs;
segread(&segs);
printf("Current segment register settings\n\n");
printf("CS: %X DS: %X\n", segs.cs, segs.ds);
printf("ES: %X SS: %X\n", segs.es, segs.ss);
return 0;
}
函数名: setactivepage
功 能: 设置图形输出活动页
用 法: void far setactivepage(int pagenum);
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>.h>
int main(void)
{
/* select a driver and mode that supports */
/* multiple pages. */
int gdriver = EGA, gmode = EGAHI, errorcode;
int x, y, ht;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
x = getmaxx() / 2;
y = getmaxy() / 2;
ht = textheight("W");
/* select the off screen page for drawing */
setactivepage(1);
/* draw a line on page #1 */
line(0, 0, getmaxx(), getmaxy());
/* output a message on page #1 */
settextjustify(CENTER_TEXT, CENTER_TEXT);
outtextxy(x, y, "This is page #1:");
outtextxy(x, y+ht, "Press any key to halt:");
/* select drawing to page #0 */
setactivepage(0);
/* output a message on page #0 */
outtextxy(x, y, "This is page #0.");
outtextxy(x, y+ht, "Press any key to view page #1:");
getch();
/* select page #1 as the visible page */
setvisualpage(1);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: setallpallette
功 能: 按指定方式改变所有的调色板颜色
用 法: void far setallpallette(struct palette, far *pallette);
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
struct palettetype pal;
int color, maxcolor, ht;
int y = 10;
char msg[80];
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
maxcolor = getmaxcolor();
ht = 2 * textheight("W");
/* grab a copy of the palette */
getpalette(&pal);
/* display the default palette colors */
for (color=1; color<=maxcolor; color++)
{
setcolor(color);
sprintf(msg, "Color: %d", color);
outtextxy(1, y, msg);
y += ht;
}
/* wait for a key */
getch();
/* black out the colors one by one */
for (color=1; color<=maxcolor; color++)
{
setpalette(color, BLACK);
getch();
}
/* restore the palette colors */
setallpalette(&pal);
/* clean up */
getch();
closegraph();
return 0;
}
函数名: setaspectratio
功 能: 设置图形纵横比
用 法: void far setaspectratio(int xasp, int yasp);
程序例:
＃i nclude
＃i nclude
＃i nclude
＃i nclude .h>.h>.h>.h>
int main(void)
{
/* request auto detection */
int gdriver = DETECT, gmode, errorcode;
int xasp, yasp, midx, midy;
/* initialize graphics and local variables */
initgraph(&gdriver, &gmode, "");
/* read result of initialization */
errorcode = graphresult();
if (errorcode != grOk) /* an error occurred */
{
printf("Graphics error: %s\n", grapherrormsg(errorcode));
printf("Press any key to halt:");
getch();
exit(1); /* terminate with an error code */
}
midx = getmaxx() / 2;
midy = getmaxy() / 2;
setcolor(getmaxcolor());
/* get current aspect ratio settings */
getaspectratio(&xasp, &yasp);
/* draw normal circle */
circle(midx, midy, 100);
getch();
/* claer the screen */
cleardevice();
/* adjust the aspect for a wide circle */
setaspectratio(xasp/2, yasp);
circle(midx, midy, 100);
getch();
/* adjust the aspect for a narrow circle */
cleardevice();
setaspectratio(xasp, yasp/2);
circle(midx, midy, 100);
/* clean up */
getch();
closegraph();
return 0;
}
