【redis源码学习】持久化机制，java程序员面试算法宝典pdf

/* Show some info about non-empty databases */
run_with_period(5000) {
for (j = 0; j < server.dbnum; j++) {
long long size, used, vkeys;
size = dictSlots(server.db[j].dict);
used = dictSize(server.db[j].dict);
vkeys = dictSize(server.db[j].expires);
if (used || vkeys) {
serverLog(LL_VERBOSE,“DB %d: %lld keys (%lld volatile) in %lld slots HT.”,j,used,vkeys,size);
/* dictPrintStats(server.dict); */
}
}
}
/* Show information about connected clients */
if (!server.sentinel_mode) {
run_with_period(5000) {
serverLog(LL_DEBUG,
“%lu clients connected (%lu replicas), %zu bytes in use”,
listLength(server.clients)-listLength(server.slaves),
listLength(server.slaves),
zmalloc_used_memory());
}
}
/* We need to do a few operations on clients asynchronously. */
clientsCron();
/* Handle background operations on Redis databases. */
databasesCron();
/* Start a scheduled AOF rewrite if this was requested by the user while
• a BGSAVE was in progress. */
if (!hasActiveChildProcess() &&
server.aof_rewrite_scheduled)
{
rewriteAppendOnlyFileBackground();
}
/* Check if a background saving or AOF rewrite in progress terminated. */
if (hasActiveChildProcess() || ldbPendingChildren())
{
checkChildrenDone();
} else {
/* If there is not a background saving/rewrite in progress check if
• we have to save/rewrite now. */
for (j = 0; j < server.saveparamslen; j++) {
struct saveparam *sp = server.saveparams+j;
/* Save if we reached the given amount of changes,
• the given amount of seconds, and if the latest bgsave was
• successful or if, in case of an error, at least
• CONFIG_BGSAVE_RETRY_DELAY seconds already elapsed. */
if (server.dirty >= sp->changes &&
server.unixtime-server.lastsave > sp->seconds &&
(server.unixtime-server.lastbgsave_try >
CONFIG_BGSAVE_RETRY_DELAY ||
server.lastbgsave_status == C_OK))
{
serverLog(LL_NOTICE,“%d changes in %d seconds. Saving…”,
sp->changes, (int)sp->seconds);
rdbSaveInfo rsi, *rsiptr;
rsiptr = rdbPopulateSaveInfo(&rsi);
rdbSaveBackground(server.rdb_filename,rsiptr);
break;
}
}
/* Trigger an AOF rewrite if needed. */
if (server.aof_state == AOF_ON &&
!hasActiveChildProcess() &&
server.aof_rewrite_perc &&
server.aof_current_size > server.aof_rewrite_min_size)
{
long long base = server.aof_rewrite_base_size ?
server.aof_rewrite_base_size : 1;
long long growth = (server.aof_current_size*100/base) - 100;
if (growth >= server.aof_rewrite_perc) {
serverLog(LL_NOTICE,“Starting automatic rewriting of AOF on %lld%% growth”,growth);
rewriteAppendOnlyFileBackground();
}
}
}
/* AOF postponed flush: Try at every cron cycle if the slow fsync
• completed. */
if (server.aof_flush_postponed_start) flushAppendOnlyFile(0);
/* AOF write errors: in this case we have a buffer to flush as well and
• clear the AOF error in case of success to make the DB writable again,
• however to try every second is enough in case of ‘hz’ is set to
• an higher frequency. */
run_with_period(1000) {
if (server.aof_last_write_status == C_ERR)
flushAppendOnlyFile(0);
}
/* Clear the paused clients flag if needed. */
clientsArePaused(); /* Don’t check return value, just use the side effect.*/
/* Replication cron function – used to reconnect to master,
• detect transfer failures, start background RDB transfers and so forth. */
run_with_period(1000) replicationCron();
/* Run the Redis Cluster cron. */
run_with_period(100) {
if (server.cluster_enabled) clusterCron();
}
/* Run the Sentinel timer if we are in sentinel mode. */
if (server.sentinel_mode) sentinelTimer();
/* Cleanup expired MIGRATE cached sockets. */
run_with_period(1000) {
migrateCloseTimedoutSockets();
}
/* Stop the I/O threads if we don’t have enough pending work. */
stopThreadedIOIfNeeded();
/* Resize tracking keys table if needed. This is also done at every
• command execution, but we want to be sure that if the last command
• executed changes the value via CONFIG SET, the server will perform
• the operation even if completely idle. */
if (server.tracking_clients) trackingLimitUsedSlots();
/* Start a scheduled BGSAVE if the corresponding flag is set. This is
• useful when we are forced to postpone a BGSAVE because an AOF
• rewrite is in progress.
• 
• Note: this code must be after the replicationCron() call above so
• make sure when refactoring this file to keep this order. This is useful
• because we want to give priority to RDB savings for replication. */
if (!hasActiveChildProcess() &&
server.rdb_bgsave_scheduled &&
(server.unixtime-server.lastbgsave_try > CONFIG_BGSAVE_RETRY_DELAY ||
server.lastbgsave_status == C_OK))
{
rdbSaveInfo rsi, *rsiptr;
rsiptr = rdbPopulateSaveInfo(&rsi);
if (rdbSaveBackground(server.rdb_filename,rsiptr) == C_OK)
server.rdb_bgsave_scheduled = 0;
}
/* Fire the cron loop modules event. */
RedisModuleCronLoopV1 ei = {REDISMODULE_CRON_LOOP_VERSION,server.hz};
moduleFireServerEvent(REDISMODULE_EVENT_CRON_LOOP,
0,
&ei);
server.cronloops++;
return 1000/server.hz;
}

int rdbSaveBackground(char *filename, rdbSaveInfo *rsi) {
pid_t childpid;
if (hasActiveChildProcess()) return C_ERR;
server.dirty_before_bgsave = server.dirty;
server.lastbgsave_try = time(NULL);
openChildInfoPipe();
if ((childpid = redisFork()) == 0) {
int retval;
/* Child */
redisSetProcTitle(“redis-rdb-bgsave”);
redisSetCpuAffinity(server.bgsave_cpulist);
retval = rdbSave(filename,rsi);
if (retval == C_OK) {
sendChildCOWInfo(CHILD_INFO_TYPE_RDB, “RDB”);
}
exitFromChild((retval == C_OK) ? 0 : 1);
} else {
/* Parent */
if (childpid == -1) {
closeChildInfoPipe();
server.lastbgsave_status = C_ERR;
serverLog(LL_WARNING,“Can’t save in background: fork: %s”,
strerror(errno));
return C_ERR;
}
serverLog(LL_NOTICE,“Background saving started by pid %d”,childpid);
server.rdb_save_time_start = time(NULL);
server.rdb_child_pid = childpid;
server.rdb_child_type = RDB_CHILD_TYPE_DISK;
return C_OK;
}
return C_OK; /* unreached */
}

/* Save the DB on disk. Return C_ERR on error, C_OK on success. */
int rdbSave(char *filename, rdbSaveInfo *rsi) {
char tmpfile[256];
char cwd[MAXPATHLEN]; /* Current working dir path for error messages. */
FILE *fp;
rio rdb;
int error = 0;
snprintf(tmpfile,256,“temp-%d.rdb”, (int) getpid());
fp = fopen(tmpfile,“w”);
if (!fp) {
char *cwdp = getcwd(cwd,MAXPATHLEN);
serverLog(LL_WARNING,
"Failed opening the RDB file %s (in server root dir %s) "
“for saving: %s”,
filename,
cwdp ? cwdp : “unknown”,
strerror(errno));
return C_ERR;
}
rioInitWithFile(&rdb,fp);
startSaving(RDBFLAGS_NONE);
if (server.rdb_save_incremental_fsync)
rioSetAutoSync(&rdb,REDIS_AUTOSYNC_BYTES);
if (rdbSaveRio(&rdb,&error,RDBFLAGS_NONE,rsi) == C_ERR) {
errno = error;
goto werr;
}
/* Make sure data will not remain on the OS’s output buffers */
if (fflush(fp) == EOF) goto werr;
if (fsync(fileno(fp)) == -1) goto werr;
if (fclose(fp) == EOF) goto werr;
/* Use RENAME to make sure the DB file is changed atomically only
• if the generate DB file is ok. */
if (rename(tmpfile,filename) == -1) {
char *cwdp = getcwd(cwd,MAXPATHLEN);
serverLog(LL_WARNING,
"Error moving temp DB file %s on the final "
“destination %s (in server root dir %s): %s”,
tmpfile,
filename,
cwdp ? cwdp : “unknown”,
strerror(errno));
unlink(tmpfile);
stopSaving(0);
return C_ERR;
}
serverLog(LL_NOTICE,“DB saved on disk”);
server.dirty = 0;
server.lastsave = time(NULL);
server.lastbgsave_status = C_OK;
stopSaving(1);
return C_OK;
werr:
serverLog(LL_WARNING,“Write error saving DB on disk: %s”, strerror(errno));
fclose(fp);
unlink(tmpfile);
stopSaving(0);
return C_ERR;
}

/* Produces a dump of the database in RDB format sending it to the specified