一、锁定

基于Redis的Java分布式可重入锁对象，并实现了锁接口。

如果获取锁的Redisson实例崩溃，则此类锁可能会在获取状态下永久挂起。为了避免这种Redisson维护锁watchdog，当锁持有者Redisson实例处于活动状态时，它会延长锁的到期时间。默认情况下，lock watchdog超时为30秒，可以通过Config.lockWatchdogTimeout设置进行更改。

可以定义锁获取期间的leaseTime参数。在指定的时间间隔后，锁定的锁将自动释放。

RLock对象的行为符合Java Lock规范。这意味着只有锁所有者线程才能解锁它，否则将引发IllegalMonitorStateException。否则，请考虑使用RSemaphore对象。

代码示例：

RLock lock = redisson.getLock("myLock");
// traditional lock method
lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
boolean res = lock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
   try {
     ...
   } finally {
       lock.unlock();
   }
}

异步接口用法的代码示例：

RLock lock = redisson.getLock("myLock");
RFuture<Void> lockFuture = lock.lockAsync();
// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = lock.lockAsync(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = lock.tryLockAsync(100, 10, TimeUnit.SECONDS);
lockFuture.whenComplete((res, exception) -> {
    // ...
    lock.unlockAsync();
});

反应式接口用法的代码示例：

RedissonReactiveClient redisson = redissonClient.reactive();
RLockReactive lock = redisson.getLock("myLock");
Mono<Void> lockMono = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockMono.doOnNext(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient redisson = redissonClient.rxJava();
RLockRx lock = redisson.getLock("myLock");
Completable lockRes = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockRes.doOnSuccess(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

二、公平锁定

基于Redis的分布式可重入公平Java锁对象实现了锁接口。

公平锁保证线程将按照请求的顺序获取它。所有等待的线程都将排队，如果某个线程已死亡，Redisson将等待其返回5秒。例如，如果5个线程由于某种原因而死亡，那么延迟将为25秒。

如果获取锁的Redisson实例崩溃，则此类锁可能会在获取状态下永久挂起。为了避免这种Redisson维护锁看门狗，当锁持有者Redisson实例处于活动状态时，它会延长锁的到期时间。默认情况下，锁看门狗超时为30秒，可以通过Config.lockWatchdogTimeout设置进行更改。

可以定义锁获取期间的leaseTime参数。在指定的时间间隔后，锁定的锁将自动释放。

RLock对象的行为符合Java Lock规范。这意味着只有锁所有者线程才能解锁它，否则将引发IllegalMonitorStateException。否则，请考虑使用RSemaphore对象。

代码示例：

RLock lock = redisson.getFairLock("myLock");
// traditional lock method
lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
boolean res = lock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
   try {
     ...
   } finally {
       lock.unlock();
   }
}

异步接口用法的代码示例：

RLock lock = redisson.getFairLock("myLock");
RFuture<Void> lockFuture = lock.lockAsync();
// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = lock.lockAsync(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = lock.tryLockAsync(100, 10, TimeUnit.SECONDS);
lockFuture.whenComplete((res, exception) -> {
    // ...
    lock.unlockAsync();
});

Reactive接口用法的代码示例:

RedissonReactiveClient redisson = redissonClient.reactive();
RLockReactive lock = redisson.getFairLock("myLock");
Mono<Void> lockMono = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockMono.doOnNext(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient redisson = redissonClient.rxJava();
RLockRx lock = redisson.getFairLock("myLock");
Completable lockRes = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockRes.doOnSuccess(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

三、多重锁

基于Redis的分布式MultiLock对象允许将Lock对象分组，并将其作为单个锁处理。每个RLock对象可能属于不同的Redisson实例。

如果获取MultiLock的Redisson实例崩溃，那么这样的MultiLock可能会永远挂在获取状态。为了避免这种Redisson维护锁watchdog，当锁持有者Redisson实例处于活动状态时，它会延长锁的到期时间。默认情况下，lock watchdog超时为30秒，可以通过Config.lockWatchdogTimeout设置进行更改。

可以定义锁获取期间的leaseTime参数。在指定的时间间隔后，锁定的锁将自动释放。

MultiLock对象的行为符合Java Lock规范。这意味着只有锁所有者线程才能解锁它，否则将引发IllegalMonitorStateException。否则，请考虑使用RSemaphore对象。

代码示例：

RLock lock1 = redisson1.getLock("lock1");
RLock lock2 = redisson2.getLock("lock2");
RLock lock3 = redisson3.getLock("lock3");
RLock multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);
// traditional lock method
multiLock.lock();
// or acquire lock and automatically unlock it after 10 seconds
multiLock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
boolean res = multiLock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
   try {
     ...
   } finally {
       multiLock.unlock();
   }
}

异步接口用法的代码示例：

RLock lock1 = redisson1.getLock("lock1");
RLock lock2 = redisson2.getLock("lock2");
RLock lock3 = redisson3.getLock("lock3");
RLock multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);
RFuture<Void> lockFuture = multiLock.lockAsync();
// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = multiLock.lockAsync(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = multiLock.tryLockAsync(100, 10, TimeUnit.SECONDS);
lockFuture.whenComplete((res, exception) -> {
    // ...
    multiLock.unlockAsync();
});

反应式接口用法的代码示例：

RedissonReactiveClient anyRedisson = redissonClient.reactive();
RLockReactive lock1 = redisson1.getLock("lock1");
RLockReactive lock2 = redisson2.getLock("lock2");
RLockReactive lock3 = redisson3.getLock("lock3");
RLockReactive multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);
Mono<Void> lockMono = multiLock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = multiLock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = multiLock.tryLock(100, 10, TimeUnit.SECONDS);
lockMono.doOnNext(res -> {
   // ...
})
.doFinally(multiLock.unlock())
.subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient anyRedisson = redissonClient.rxJava();
RLockRx lock1 = redisson1.getLock("lock1");
RLockRx lock2 = redisson2.getLock("lock2");
RLockRx lock3 = redisson3.getLock("lock3");
RLockRx multiLock = anyRedisson.getMultiLock(lock1, lock2, lock3);
Completable lockRes = multiLock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = multiLock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = multiLock.tryLock(100, 10, TimeUnit.SECONDS);
lockRes.doOnSuccess(res -> {
   // ...
})
.doFinally(multiLock.unlock())
.subscribe();

四、读写锁定

基于Redis的Java分布式可重入读写锁对象实现了读写锁接口。读和写锁都实现RLock接口。

只允许有多个ReadLock所有者和一个WriteLock所有者。

此外，Redisson允许在获取锁期间指定leaseTime参数。在指定的时间间隔后，锁定的锁将自动释放。

RLock对象的行为符合Java Lock规范。这意味着只有锁所有者线程才能解锁它，否则将引发IllegalMonitorStateException。否则，请考虑使用RSemaphore对象。

代码示例：

RReadWriteLock rwlock = redisson.getReadWriteLock("myLock");
RLock lock = rwlock.readLock();
// or
RLock lock = rwlock.writeLock();
// traditional lock method
lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
boolean res = lock.tryLock(100, 10, TimeUnit.SECONDS);
if (res) {
   try {
     ...
   } finally {
       lock.unlock();
   }
}

异步接口用法的代码示例：

RReadWriteLock rwlock = redisson.getReadWriteLock("myLock");
RLock lock = rwlock.readLock();
// or
RLock lock = rwlock.writeLock();
RFuture<Void> lockFuture = lock.lockAsync();
// or acquire lock and automatically unlock it after 10 seconds
RFuture<Void> lockFuture = lock.lockAsync(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
RFuture<Boolean> lockFuture = lock.tryLockAsync(100, 10, TimeUnit.SECONDS);
lockFuture.whenComplete((res, exception) -> {
    // ...
    lock.unlockAsync();
});

反应式接口用法的代码示例：

RedissonReactiveClient redisson = redissonClient.reactive();
RReadWriteLockReactive rwlock = redisson.getReadWriteLock("myLock");
RLockReactive lock = rwlock.readLock();
// or
RLockReactive lock = rwlock.writeLock();
Mono<Void> lockMono = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Mono<Void> lockMono = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Mono<Boolean> lockMono = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockMono.doOnNext(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient redisson = redissonClient.rxJava();
RReadWriteLockRx rwlock = redisson.getReadWriteLock("myLock");
RLockRx lock = rwlock.readLock();
// or
RLockRx lock = rwlock.writeLock();
Completable lockRes = lock.lock();
// or acquire lock and automatically unlock it after 10 seconds
Completable lockRes = lock.lock(10, TimeUnit.SECONDS);
// or wait for lock aquisition up to 100 seconds 
// and automatically unlock it after 10 seconds
Single<Boolean> lockRes = lock.tryLock(100, 10, TimeUnit.SECONDS);
lockRes.doOnSuccess(res -> {
   // ...
})
.doFinally(lock.unlock())
.subscribe();

五、信号量

基于Redis的分布式Java信号量对象，类似于信号量对象。

可以在使用前初始化，但这不是必需的，通过trySetPermissions（permissions）方法获得可用的许可量。

代码示例：

RSemaphore semaphore = redisson.getSemaphore("mySemaphore");
// acquire single permit
semaphore.acquire();
// or acquire 10 permits
semaphore.acquire(10);
// or try to acquire permit
boolean res = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
boolean res = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire 10 permit
boolean res = semaphore.tryAcquire(10);
// or try to acquire 10 permits or wait up to 15 seconds
boolean res = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
if (res) {
   try {
     ...
   } finally {
       semaphore.release();
   }
}

异步接口用法的代码示例：

RSemaphore semaphore = redisson.getSemaphore("mySemaphore");
// acquire single permit
RFuture<Void> acquireFuture = semaphore.acquireAsync();
// or acquire 10 permits
RFuture<Void> acquireFuture = semaphore.acquireAsync(10);
// or try to acquire permit
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync();
// or try to acquire permit or wait up to 15 seconds
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync(15, TimeUnit.SECONDS);
// or try to acquire 10 permit
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync(10);
// or try to acquire 10 permits or wait up to 15 seconds
RFuture<Boolean> acquireFuture = semaphore.tryAcquireAsync(10, 15, TimeUnit.SECONDS);
acquireFuture.whenComplete((res, exception) -> {
    // ...
    semaphore.releaseAsync();
});

反应式接口用法的代码示例：

RedissonReactiveClient redisson = redissonClient.reactive();
RSemaphoreReactive semaphore = redisson.getSemaphore("mySemaphore");
// acquire single permit
Mono<Void> acquireMono = semaphore.acquire();
// or acquire 10 permits
Mono<Void> acquireMono = semaphore.acquire(10);
// or try to acquire permit
Mono<Boolean> acquireMono = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
Mono<Boolean> acquireMono = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire 10 permit
Mono<Boolean> acquireMono = semaphore.tryAcquire(10);
// or try to acquire 10 permits or wait up to 15 seconds
Mono<Boolean> acquireMono = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
acquireMono.doOnNext(res -> {
   // ...
})
.doFinally(semaphore.release())
.subscribe();

RxJava3 接口使用的代码示例：

RedissonRxClient redisson = redissonClient.rxJava();
RSemaphoreRx semaphore = redisson.getSemaphore("mySemaphore");
// acquire single permit
Completable acquireRx = semaphore.acquire();
// or acquire 10 permits
Completable acquireRx = semaphore.acquire(10);
// or try to acquire permit
Single<Boolean> acquireRx = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
Single<Boolean> acquireRx = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire 10 permit
Single<Boolean> acquireRx = semaphore.tryAcquire(10);
// or try to acquire 10 permits or wait up to 15 seconds
Single<Boolean> acquireRx = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
acquireRx.doOnSuccess(res -> {
   // ...
})
.doFinally(semaphore.release())
.subscribe();

六、允许可过期信号量

基于 Redis 的分布式 Java 信号量对象，每个获取的许可证都支持租用时间参数。每个许可证都由自己的身份证标识，只能使用其身份证签发。

应在使用前通过trySetPermissions（permissions）方法使用可用许可量进行初始化。允许通过addPermissions（许可证）方法增加/减少可用许可证的数量。

代码示例：

RPermitExpirableSemaphore semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");
semaphore.trySetPermits(23);
// acquire permit
String id = semaphore.acquire();
// or acquire permit with lease time in 10 seconds
String id = semaphore.acquire(10, TimeUnit.SECONDS);
// or try to acquire permit
String id = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
String id = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
String id = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
if (id != null) {
   try {
     ...
   } finally {
       semaphore.release(id);
   }
}

异步接口用法的代码示例：

RPermitExpirableSemaphore semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");
RFuture<Boolean> setFuture = semaphore.trySetPermitsAsync(23);
// acquire permit
RFuture<String> acquireFuture = semaphore.acquireAsync();
// or acquire permit with lease time in 10 seconds
RFuture<String> acquireFuture = semaphore.acquireAsync(10, TimeUnit.SECONDS);
// or try to acquire permit
RFuture<String> acquireFuture = semaphore.tryAcquireAsync();
// or try to acquire permit or wait up to 15 seconds
RFuture<String> acquireFuture = semaphore.tryAcquireAsync(15, TimeUnit.SECONDS);
// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
RFuture<String> acquireFuture = semaphore.tryAcquireAsync(10, 15, TimeUnit.SECONDS);
acquireFuture.whenComplete((id, exception) -> {
    // ...
    semaphore.releaseAsync(id);
});

反应式接口用法的代码示例：

RedissonReactiveClient redisson = redissonClient.reactive();
RPermitExpirableSemaphoreReactive semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");
Mono<Boolean> setMono = semaphore.trySetPermits(23);
// acquire permit
Mono<String> acquireMono = semaphore.acquire();
// or acquire permit with lease time in 10 seconds
Mono<String> acquireMono = semaphore.acquire(10, TimeUnit.SECONDS);
// or try to acquire permit
Mono<String> acquireMono = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
Mono<String> acquireMono = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
Mono<String> acquireMono = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
acquireMono.flatMap(id -> {
   // ...
   return semaphore.release(id);
}).subscribe();

RxJava3 接口使用的代码示例

RedissonRxClient redisson = redissonClient.rxJava();
RPermitExpirableSemaphoreRx semaphore = redisson.getPermitExpirableSemaphore("mySemaphore");
Single<Boolean> setRx = semaphore.trySetPermits(23);
// acquire permit
Single<String> acquireRx = semaphore.acquire();
// or acquire permit with lease time in 10 seconds
Single<String> acquireRx = semaphore.acquire(10, TimeUnit.SECONDS);
// or try to acquire permit
Maybe<String> acquireRx = semaphore.tryAcquire();
// or try to acquire permit or wait up to 15 seconds
Maybe<String> acquireRx = semaphore.tryAcquire(15, TimeUnit.SECONDS);
// or try to acquire permit with least time 15 seconds or wait up to 10 seconds
Maybe<String> acquireRx = semaphore.tryAcquire(10, 15, TimeUnit.SECONDS);
acquireRx.flatMap(id -> {
   // ...
   return semaphore.release(id);
}).subscribe();

Redisson分布式锁和同步器详解-官方原版

一、锁定

二、公平锁定

三、多重锁

四、读写锁定

五、信号量

六、允许可过期信号量

热门文章

最新文章

相关课程

相关电子书

相关实验场景

探索云世界

热门

云计算

大数据

云原生

人工智能

数据库

开发与运维

活动广场

任务中心

训练营

直播

乘风者计划

下载

镜像站

技术资料

Redisson分布式锁和同步器详解-官方原版

一、锁定

二、公平锁定

三、多重锁

四、读写锁定

五、信号量

六、允许可过期信号量

热门文章

最新文章

相关课程

相关电子书

相关实验场景