apt-get -y install automake libtool libtool-bin
sysbench-1.0.20.zip
unzip 
cd sysbench-1.0.20
mkdir /usr/sysbench/
./autogen.sh

echo "export LC_ALL=C" >> /root/.bashrc
source /root/.bashrc

sudo apt-get -y install libmysqlclient-dev
sudo apt-get -y install libmysqld-dev
sudo apt-get -y install libmysqld-pic

cp /usr/bin/libtool /root/sysbench-1.0.20
make && make install 

$ sysbench --help
Usage:
  sysbench [options]... [testname] [command]
Commands implemented by most tests: prepare run cleanup help
General options:
  --threads=N                     number of threads to use [1]
  --events=N                      limit for total number of events [0]
  --time=N                        limit for total execution time in seconds [10]
  --forced-shutdown=STRING        number of seconds to wait after the --time limit before forcing shutdown, or 'off' to disable [off] #超过max-time强制中断。默认是off。
  --thread-stack-size=SIZE        size of stack per thread [64K]  #每个线程的堆栈大小。默认是32K。
  --rate=N                        average transactions rate. 0 for unlimited rate [0]
  --report-interval=N             periodically report intermediate statistics with a specified interval in seconds. 0 disables intermediate reports [0]
  --report-checkpoints=[LIST,...] dump full statistics and reset all counters at specified points in time. The argument is a list of comma-separated values representing the amount of time in seconds elapsed from start of test when report checkpoint(s) must be performed. Report checkpoints are off by default. []
  --debug[=on|off]                print more debugging info [off]
  --validate[=on|off]             perform validation checks where possible [off]
  --help[=on|off]                 print help and exit [off]
  --version[=on|off]              print version and exit [off]
  --config-file=FILENAME          File containing command line options
  --tx-rate=N                     deprecated alias for --rate [0]
  --max-requests=N                deprecated alias for --events [0]  #请求的最大数目。默认为10000，0代表不限制。
  --max-time=N                    deprecated alias for --time [0]  #最大执行时间，单位是s。默认是0,不限制
  --num-threads=N                 deprecated alias for --threads [1]  #创建测试线程的数目。默认为1.
Pseudo-Random Numbers Generator options:
  --rand-type=STRING random numbers distribution {uniform,gaussian,special,pareto} [special]
  --rand-spec-iter=N number of iterations used for numbers generation [12]
  --rand-spec-pct=N  percentage of values to be treated as 'special' (for special distribution) [1]
  --rand-spec-res=N  percentage of 'special' values to use (for special distribution) [75]
  --rand-seed=N      seed for random number generator. When 0, the current time is used as a RNG seed. [0]
  --rand-pareto-h=N  parameter h for pareto distribution [0.2]
Log options:
  --verbosity=N verbosity level {5 - debug, 0 - only critical messages} [3]
  --percentile=N       percentile to calculate in latency statistics (1-100). Use the special value of 0 to disable percentile calculations [95]
  --histogram[=on|off] print latency histogram in report [off]
General database options:
  --db-driver=STRING  specifies database driver to use ('help' to get list of available drivers)
  --db-ps-mode=STRING prepared statements usage mode {auto, disable} [auto]
  --db-debug[=on|off] print database-specific debug information [off]
Compiled-in database drivers:
  mysql - MySQL driver
  pgsql - PostgreSQL driver
mysql options:
  --mysql-host=[LIST,...]          MySQL server host [localhost]
  --mysql-port=[LIST,...]          MySQL server port [3306]
  --mysql-socket=[LIST,...]        MySQL socket
  --mysql-user=STRING              MySQL user [sbtest]
  --mysql-password=STRING          MySQL password []
  --mysql-db=STRING                MySQL database name [sbtest]
  --mysql-ssl[=on|off]             use SSL connections, if available in the client library [off]
  --mysql-ssl-cipher=STRING        use specific cipher for SSL connections []
  --mysql-compression[=on|off]     use compression, if available in the client library [off]
  --mysql-debug[=on|off]           trace all client library calls [off]
  --mysql-ignore-errors=[LIST,...] list of errors to ignore, or "all" [1213,1020,1205]
  --mysql-dry-run[=on|off]         Dry run, pretend that all MySQL client API calls are successful without executing them [off]
pgsql options:
  --pgsql-host=STRING     PostgreSQL server host [localhost]
  --pgsql-port=N          PostgreSQL server port [5432]
  --pgsql-user=STRING     PostgreSQL user [sbtest]
  --pgsql-password=STRING PostgreSQL password []
  --pgsql-db=STRING       PostgreSQL database name [sbtest]
Compiled-in tests:
  fileio - File I/O test
  cpu - CPU performance test
  memory - Memory functions speed test
  threads - Threads subsystem performance test
  mutex - Mutex performance test

$ sysbench  --test=fileio help
sysbench 1.0.11 (using system LuaJIT 2.1.0-beta3)
fileio options:
  --file-num=N   创建测试文件的数量。默认是128
  --file-block-size=N  测试时文件块的大小。默认是16384(16K)
  --file-total-size=SIZE   测试文件的总大小。默认是2G
  --file-test-mode=STRING  文件测试模式{seqwr(顺序写), seqrewr(顺序读写), seqrd(顺序读), rndrd(随机读), rndwr(随机写), rndrw(随机读写)}
  --file-io-mode=STRING   文件操作模式{sync(同步),async(异步),fastmmap(快速map映射),slowmmap(慢map映射)}。默认是sync
  --file-extra-flags=STRING   使用额外的标志来打开文件{sync,dsync,direct} 。默认为空
  --file-fsync-freq=N   执行fsync()的频率。(0 – 不使用fsync())。默认是100
  --file-fsync-all=[on|off] 每执行完一次写操作就执行一次fsync。默认是off
  --file-fsync-end=[on|off] 在测试结束时才执行fsync。默认是on
  --file-fsync-mode=STRING  使用哪种方法进行同步{fsync, fdatasync}。默认是fsync
  --file-merged-requests=N   如果可以，合并最多的IO请求数(0 – 表示不合并)。默认是0
  --file-rw-ratio=N     测试时的读写比例。默认是1.5

$ sysbench  --test=cpu help
sysbench 1.0.11 (using system LuaJIT 2.1.0-beta3)
cpu options:
  --cpu-max-prime=N upper limit for primes generator [10000] 最大质数发生器数量。默认是10000

$ sysbench  --test=memory help
sysbench 0.4.12:  multi-threaded system evaluation benchmark
memory options:
  --memory-block-size=SIZE  测试时内存块大小。默认是1K
  --memory-total-size=SIZE    传输数据的总大小。默认是100G
  --memory-scope=STRING    内存访问范围{global,local}。默认是global
  --memory-hugetlb=[on|off]  从HugeTLB池内存分配。默认是off
  --memory-oper=STRING     内存操作类型。{read, write, none} 默认是write
  --memory-access-mode=STRING存储器存取方式{seq,rnd} 默认是seq

threads options:
  --thread-yields=N   每个请求产生多少个线程。默认是1000
  --thread-locks=N    每个线程的锁的数量。默认是8

mutex options:
  --mutex-num=N    数组互斥的总大小。默认是4096
  --mutex-locks=N    每个线程互斥锁的数量。默认是50000
  --mutex-loops=N    内部互斥锁的空循环数量。默认是10000

oltp options:
  --oltp-test-mode=STRING    执行模式{simple,complex(advanced transactional),nontrx(non-transactional),sp}。默认是complex
  --oltp-reconnect-mode=STRING 重新连接模式{session(不使用重新连接。每个线程断开只在测试结束),transaction(在每次事务结束后重新连接),query(在每个SQL语句执行完重新连接),random(对于每个事务随机选择以上重新连接模式)}。默认是session
  --oltp-sp-name=STRING   存储过程的名称。默认为空
  --oltp-read-only=[on|off]  只读模式。Update，delete，insert语句不可执行。默认是off
  --oltp-skip-trx=[on|off]   省略begin/commit语句。默认是off
  --oltp-range-size=N      查询范围。默认是100
  --oltp-point-selects=N          number of point selects [10]
  --oltp-simple-ranges=N          number of simple ranges [1]
  --oltp-sum-ranges=N             number of sum ranges [1]
  --oltp-order-ranges=N           number of ordered ranges [1]
  --oltp-distinct-ranges=N        number of distinct ranges [1]
  --oltp-index-updates=N          number of index update [1]
  --oltp-non-index-updates=N      number of non-index updates [1]
  --oltp-nontrx-mode=STRING   查询类型对于非事务执行模式{select, update_key, update_nokey, insert, delete} [select]
  --oltp-auto-inc=[on|off]      AUTO_INCREMENT是否开启。默认是on
  --oltp-connect-delay=N     在多少微秒后连接数据库。默认是10000
  --oltp-user-delay-min=N    每个请求最短等待时间。单位是ms。默认是0
  --oltp-user-delay-max=N    每个请求最长等待时间。单位是ms。默认是0
  --oltp-table-name=STRING  测试时使用到的表名。默认是sbtest
  --oltp-table-size=N         测试表的记录数。默认是10000
  --oltp-dist-type=STRING    分布的随机数{uniform(均匀分布),Gaussian(高斯分布),special(空间分布)}。默认是special
  --oltp-dist-iter=N    产生数的迭代次数。默认是12
  --oltp-dist-pct=N    值的百分比被视为'special' (for special distribution)。默认是1
  --oltp-dist-res=N    ‘special’的百分比值。默认是75
General database options:
  --db-driver=STRING  数据库类型，指定数据库驱动程序('help' to get list of available drivers)
  --db-ps-mode=STRING 数据库预处理模式{auto, disable} [auto]
Compiled-in database drivers:
    mysql - MySQL driver
mysql options:
  --mysql-host=[LIST,...]       MySQL server host [localhost]
  --mysql-port=N                MySQL server port [3306]
  --mysql-socket=STRING         MySQL socket
  --mysql-user=STRING           MySQL user [sbtest]
  --mysql-password=STRING       MySQL password []
  --mysql-db=STRING             MySQL database name [sbtest]
  --mysql-table-engine=STRING   storage engine to use for the test table {myisam,innodb,bdb,heap,ndbcluster,federated} [innodb]
  --mysql-engine-trx=STRING     whether storage engine used is transactional or not {yes,no,auto} [auto]
  --mysql-ssl=[on|off]          use SSL connections, if available in the client library [off]
  --myisam-max-rows=N           max-rows parameter for MyISAM tables [1000000]
  --mysql-create-options=STRING additional options passed to CREATE TABLE []